diff --git a/harbour/ChangeLog b/harbour/ChangeLog
index 76b8cc2f12..726fa1bea5 100644
--- a/harbour/ChangeLog
+++ b/harbour/ChangeLog
@@ -16,6 +16,11 @@
    The license applies to all entries newer than 2009-04-28.
 */
 
+2012-02-07 22:10 UTC+0100 Viktor Szakats (harbour syenar.net)
+  * src/3rd/jpeg/Makefile
+  * src/3rd/jpeg/*
+    * 8c -> 8d (using hb3rdpat)
+
 2012-02-07 20:48 UTC+0100 Viktor Szakats (harbour syenar.net)
   * src/vm/set.c
     ! SET( _SET_DEVICE ) to accept anything starting with "PRIN"
diff --git a/harbour/src/3rd/jpeg/Makefile b/harbour/src/3rd/jpeg/Makefile
index 0bfe262685..2dabf3491f 100644
--- a/harbour/src/3rd/jpeg/Makefile
+++ b/harbour/src/3rd/jpeg/Makefile
@@ -105,8 +105,8 @@ else
 endif
 
 # ORIGIN http://www.ijg.org/
-# VER    8c
-# URL    http://www.ijg.org/files/jpegsrc.v8c.tar.gz
+# VER    8d
+# URL    http://www.ijg.org/files/jpegsrc.v8d.tar.gz
 # DIFF   jpeg.dif
 #
 # MAP    README
diff --git a/harbour/src/3rd/jpeg/README b/harbour/src/3rd/jpeg/README
index 451265d764..0a23c19590 100644
--- a/harbour/src/3rd/jpeg/README
+++ b/harbour/src/3rd/jpeg/README
@@ -1,7 +1,7 @@
 The Independent JPEG Group's JPEG software
 ==========================================
 
-README for release 8c of 16-Jan-2011
+README for release 8d of 15-Jan-2012
 ====================================
 
 This distribution contains the eighth public release of the Independent JPEG
@@ -13,7 +13,8 @@ Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson,
 Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers,
 and other members of the Independent JPEG Group.
 
-IJG is not affiliated with the official ISO JPEG standards committee.
+IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee
+(also known as JPEG, together with ITU-T SG16).
 
 
 DOCUMENTATION ROADMAP
@@ -114,7 +115,7 @@ with respect to this software, its quality, accuracy, merchantability, or
 fitness for a particular purpose.  This software is provided "AS IS", and you,
 its user, assume the entire risk as to its quality and accuracy.
 
-This software is copyright (C) 1991-2011, Thomas G. Lane, Guido Vollbeding.
+This software is copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
 All Rights Reserved except as specified below.
 
 Permission is hereby granted to use, copy, modify, and distribute this
@@ -222,9 +223,11 @@ Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
 Continuous-tone Still Images, Part 2: Compliance testing" and has document
 numbers ISO/IEC IS 10918-2, ITU-T T.83.
 IJG JPEG 8 introduces an implementation of the JPEG SmartScale extension
-which is specified in a contributed document at ITU and ISO with title "ITU-T
-JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced Image Coding", April
-2006, Geneva, Switzerland.  The latest version of the document is Revision 3.
+which is specified in two documents:  A contributed document at ITU and ISO
+with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced
+Image Coding", April 2006, Geneva, Switzerland.  The latest version of this
+document is Revision 3.  And a contributed document ISO/IEC JTC1/SC29/WG1 N
+5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany.
 
 The JPEG standard does not specify all details of an interchangeable file
 format.  For the omitted details we follow the "JFIF" conventions, revision
@@ -254,8 +257,8 @@ ARCHIVE LOCATIONS
 The "official" archive site for this software is www.ijg.org.
 The most recent released version can always be found there in
 directory "files".  This particular version will be archived as
-http://www.ijg.org/files/jpegsrc.v8c.tar.gz, and in Windows-compatible
-"zip" archive format as http://www.ijg.org/files/jpegsr8c.zip.
+http://www.ijg.org/files/jpegsrc.v8d.tar.gz, and in Windows-compatible
+"zip" archive format as http://www.ijg.org/files/jpegsr8d.zip.
 
 The JPEG FAQ (Frequently Asked Questions) article is a source of some
 general information about JPEG.
@@ -281,6 +284,10 @@ ITU JPEG (Study Group 16) meeting in Geneva, Switzerland.
 Thank to Thomas Wiegand and Gary Sullivan for inviting me to the
 Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland.
 
+Thank to Thomas Richter and Daniel Lee for inviting me to the
+ISO/IEC JTC1/SC29/WG1 (also known as JPEG, together with ITU-T SG16)
+meeting in Berlin, Germany.
+
 Thank to John Korejwa and Massimo Ballerini for inviting me to
 fruitful consultations in Boston, MA and Milan, Italy.
 
@@ -304,17 +311,35 @@ design and development of this singular software package.
 FILE FORMAT WARS
 ================
 
-The ISO JPEG standards committee actually promotes different formats like
-"JPEG 2000" or "JPEG XR" which are incompatible with original DCT-based
-JPEG and which are based on faulty technologies.  IJG therefore does not
-and will not support such momentary mistakes (see REFERENCES).
-We have little or no sympathy for the promotion of these formats.  Indeed,
-one of the original reasons for developing this free software was to help
-force convergence on common, interoperable format standards for JPEG files.
+The ISO/IEC JTC1/SC29/WG1 standards committee (also known as JPEG, together
+with ITU-T SG16) currently promotes different formats containing the name
+"JPEG" which is misleading because these formats are incompatible with
+original DCT-based JPEG and are based on faulty technologies.
+IJG therefore does not and will not support such momentary mistakes
+(see REFERENCES).
+There exist also distributions under the name "OpenJPEG" promoting such
+kind of formats which is misleading because they don't support original
+JPEG images.
+We have no sympathy for the promotion of inferior formats.  Indeed, one of
+the original reasons for developing this free software was to help force
+convergence on common, interoperable format standards for JPEG files.
 Don't use an incompatible file format!
 (In any case, our decoder will remain capable of reading existing JPEG
 image files indefinitely.)
 
+Furthermore, the ISO committee pretends to be "responsible for the popular
+JPEG" in their public reports which is not true because they don't respond to
+actual requirements for the maintenance of the original JPEG specification.
+
+There are currently distributions in circulation containing the name
+"libjpeg" which claim to be a "derivative" or "fork" of the original
+libjpeg, but don't have the features and are incompatible with formats
+supported by actual IJG libjpeg distributions.  Furthermore, they
+violate the license conditions as described under LEGAL ISSUES above.
+We have no sympathy for the release of misleading and illegal
+distributions derived from obsolete code bases.
+Don't use an obsolete code base!
+
 
 TO DO
 =====
@@ -323,4 +348,4 @@ Version 8 is the first release of a new generation JPEG standard
 to overcome the limitations of the original JPEG specification.
 More features are being prepared for coming releases...
 
-Please send bug reports, offers of help, etc. to jpeg-info@uc.ag.
+Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org.
diff --git a/harbour/src/3rd/jpeg/jaricom.c b/harbour/src/3rd/jpeg/jaricom.c
index f43e2ea7fa..690068861f 100644
--- a/harbour/src/3rd/jpeg/jaricom.c
+++ b/harbour/src/3rd/jpeg/jaricom.c
@@ -1,16 +1,16 @@
 /*
  * jaricom.c
  *
- * Developed 1997-2009 by Guido Vollbeding.
+ * Developed 1997-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains probability estimation tables for common use in
  * arithmetic entropy encoding and decoding routines.
  *
- * This data represents Table D.2 in the JPEG spec (ISO/IEC IS 10918-1
- * and CCITT Recommendation ITU-T T.81) and Table 24 in the JBIG spec
- * (ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82).
+ * This data represents Table D.3 in the JPEG spec (D.2 in the draft),
+ * ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81, and Table 24
+ * in the JBIG spec, ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82.
  */
 
 #define JPEG_INTERNALS
@@ -147,7 +147,7 @@ const INT32 jpeg_aritab[113+1] = {
   V( 112, 0x59eb, 112, 111, 1 ),
 /*
  * This last entry is used for fixed probability estimate of 0.5
- * as recommended in Section 10.3 Table 5 of ITU-T Rec. T.851.
+ * as suggested in Section 10.3 Table 5 of ITU-T Rec. T.851.
  */
   V( 113, 0x5a1d, 113, 113, 0 )
 };
diff --git a/harbour/src/3rd/jpeg/jcarith.c b/harbour/src/3rd/jpeg/jcarith.c
index 0b7ea55d40..033f67069e 100644
--- a/harbour/src/3rd/jpeg/jcarith.c
+++ b/harbour/src/3rd/jpeg/jcarith.c
@@ -1,7 +1,7 @@
 /*
  * jcarith.c
  *
- * Developed 1997-2009 by Guido Vollbeding.
+ * Developed 1997-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -223,7 +223,7 @@ arith_encode (j_compress_ptr cinfo, unsigned char *st, int val)
   register INT32 qe, temp;
   register int sv;
 
-  /* Fetch values from our compact representation of Table D.2:
+  /* Fetch values from our compact representation of Table D.3(D.2):
    * Qe values and probability estimation state machine
    */
   sv = *st;
@@ -765,18 +765,21 @@ encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
     /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
 
+    if ((ke = cinfo->lim_Se) == 0) continue;
     tbl = compptr->ac_tbl_no;
 
     /* Establish EOB (end-of-block) index */
-    for (ke = cinfo->lim_Se; ke > 0; ke--)
+    do {
       if ((*block)[natural_order[ke]]) break;
+    } while (--ke);
 
     /* Figure F.5: Encode_AC_Coefficients */
-    for (k = 1; k <= ke; k++) {
-      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    for (k = 0; k < ke;) {
+      st = entropy->ac_stats[tbl] + 3 * k;
       arith_encode(cinfo, st, 0);	/* EOB decision */
-      while ((v = (*block)[natural_order[k]]) == 0) {
-	arith_encode(cinfo, st + 1, 0); st += 3; k++;
+      while ((v = (*block)[natural_order[++k]]) == 0) {
+	arith_encode(cinfo, st + 1, 0);
+	st += 3;
       }
       arith_encode(cinfo, st + 1, 1);
       /* Figure F.6: Encoding nonzero value v */
@@ -812,9 +815,9 @@ encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
       while (m >>= 1)
 	arith_encode(cinfo, st, (m & v) ? 1 : 0);
     }
-    /* Encode EOB decision only if k <= cinfo->lim_Se */
-    if (k <= cinfo->lim_Se) {
-      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    /* Encode EOB decision only if k < cinfo->lim_Se */
+    if (k < cinfo->lim_Se) {
+      st = entropy->ac_stats[tbl] + 3 * k;
       arith_encode(cinfo, st, 1);
     }
   }
diff --git a/harbour/src/3rd/jpeg/jccoefct.c b/harbour/src/3rd/jpeg/jccoefct.c
index d775313b86..924a703dda 100644
--- a/harbour/src/3rd/jpeg/jccoefct.c
+++ b/harbour/src/3rd/jpeg/jccoefct.c
@@ -2,6 +2,7 @@
  * jccoefct.c
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2003-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -183,16 +184,16 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
 			    ypos, xpos, (JDIMENSION) blockcnt);
 	    if (blockcnt < compptr->MCU_width) {
 	      /* Create some dummy blocks at the right edge of the image. */
-	      jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt],
-			(compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
+	      FMEMZERO((void FAR *) coef->MCU_buffer[blkn + blockcnt],
+		       (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
 	      for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
 		coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
 	      }
 	    }
 	  } else {
 	    /* Create a row of dummy blocks at the bottom of the image. */
-	    jzero_far((void FAR *) coef->MCU_buffer[blkn],
-		      compptr->MCU_width * SIZEOF(JBLOCK));
+	    FMEMZERO((void FAR *) coef->MCU_buffer[blkn],
+		     compptr->MCU_width * SIZEOF(JBLOCK));
 	    for (bi = 0; bi < compptr->MCU_width; bi++) {
 	      coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
 	    }
@@ -290,7 +291,7 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
       if (ndummy > 0) {
 	/* Create dummy blocks at the right edge of the image. */
 	thisblockrow += blocks_across; /* => first dummy block */
-	jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
+	FMEMZERO((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
 	lastDC = thisblockrow[-1][0];
 	for (bi = 0; bi < ndummy; bi++) {
 	  thisblockrow[bi][0] = lastDC;
@@ -309,8 +310,8 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
 	   block_row++) {
 	thisblockrow = buffer[block_row];
 	lastblockrow = buffer[block_row-1];
-	jzero_far((void FAR *) thisblockrow,
-		  (size_t) (blocks_across * SIZEOF(JBLOCK)));
+	FMEMZERO((void FAR *) thisblockrow,
+		 (size_t) (blocks_across * SIZEOF(JBLOCK)));
 	for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
 	  lastDC = lastblockrow[h_samp_factor-1][0];
 	  for (bi = 0; bi < h_samp_factor; bi++) {
diff --git a/harbour/src/3rd/jpeg/jccolor.c b/harbour/src/3rd/jpeg/jccolor.c
index 0a8a4b5d13..3e2d0e9277 100644
--- a/harbour/src/3rd/jpeg/jccolor.c
+++ b/harbour/src/3rd/jpeg/jccolor.c
@@ -2,6 +2,7 @@
  * jccolor.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -299,6 +300,39 @@ grayscale_convert (j_compress_ptr cinfo,
 }
 
 
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * No colorspace conversion, but change from interleaved
+ * to separate-planes representation.
+ */
+
+METHODDEF(void)
+rgb_convert (j_compress_ptr cinfo,
+	     JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+	     JDIMENSION output_row, int num_rows)
+{
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr0[col] = inptr[RGB_RED];
+      outptr1[col] = inptr[RGB_GREEN];
+      outptr2[col] = inptr[RGB_BLUE];
+      inptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
 /*
  * Convert some rows of samples to the JPEG colorspace.
  * This version handles multi-component colorspaces without conversion.
@@ -368,11 +402,9 @@ jinit_color_converter (j_compress_ptr cinfo)
     break;
 
   case JCS_RGB:
-#if RGB_PIXELSIZE != 3
     if (cinfo->input_components != RGB_PIXELSIZE)
       ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
     break;
-#endif /* else share code with YCbCr */
 
   case JCS_YCbCr:
     if (cinfo->input_components != 3)
@@ -396,22 +428,21 @@ jinit_color_converter (j_compress_ptr cinfo)
   case JCS_GRAYSCALE:
     if (cinfo->num_components != 1)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_GRAYSCALE)
+    if (cinfo->in_color_space == JCS_GRAYSCALE ||
+	cinfo->in_color_space == JCS_YCbCr)
       cconvert->pub.color_convert = grayscale_convert;
     else if (cinfo->in_color_space == JCS_RGB) {
       cconvert->pub.start_pass = rgb_ycc_start;
       cconvert->pub.color_convert = rgb_gray_convert;
-    } else if (cinfo->in_color_space == JCS_YCbCr)
-      cconvert->pub.color_convert = grayscale_convert;
-    else
+    } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
 
   case JCS_RGB:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3)
-      cconvert->pub.color_convert = null_convert;
+    if (cinfo->in_color_space == JCS_RGB)
+      cconvert->pub.color_convert = rgb_convert;
     else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
diff --git a/harbour/src/3rd/jpeg/jctrans.c b/harbour/src/3rd/jpeg/jctrans.c
index cee6b0f343..f7d7b81491 100644
--- a/harbour/src/3rd/jpeg/jctrans.c
+++ b/harbour/src/3rd/jpeg/jctrans.c
@@ -2,7 +2,7 @@
  * jctrans.c
  *
  * Copyright (C) 1995-1998, Thomas G. Lane.
- * Modified 2000-2009 by Guido Vollbeding.
+ * Modified 2000-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -375,7 +375,7 @@ transencode_coef_controller (j_compress_ptr cinfo,
   buffer = (JBLOCKROW)
     (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
-  jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+  FMEMZERO((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
   for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
     coef->dummy_buffer[i] = buffer + i;
   }
diff --git a/harbour/src/3rd/jpeg/jdarith.c b/harbour/src/3rd/jpeg/jdarith.c
index c858b248b6..092f8af5fe 100644
--- a/harbour/src/3rd/jpeg/jdarith.c
+++ b/harbour/src/3rd/jpeg/jdarith.c
@@ -1,7 +1,7 @@
 /*
  * jdarith.c
  *
- * Developed 1997-2009 by Guido Vollbeding.
+ * Developed 1997-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -145,7 +145,7 @@ arith_decode (j_decompress_ptr cinfo, unsigned char *st)
     e->a <<= 1;
   }
 
-  /* Fetch values from our compact representation of Table D.2:
+  /* Fetch values from our compact representation of Table D.3(D.2):
    * Qe values and probability estimation state machine
    */
   sv = *st;
@@ -575,15 +575,19 @@ decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 
     /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
 
+    if (cinfo->lim_Se == 0) continue;
     tbl = compptr->ac_tbl_no;
+    k = 0;
 
     /* Figure F.20: Decode_AC_coefficients */
-    for (k = 1; k <= cinfo->lim_Se; k++) {
-      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    do {
+      st = entropy->ac_stats[tbl] + 3 * k;
       if (arith_decode(cinfo, st)) break;	/* EOB flag */
-      while (arith_decode(cinfo, st + 1) == 0) {
-	st += 3; k++;
-	if (k > cinfo->lim_Se) {
+      for (;;) {
+	k++;
+	if (arith_decode(cinfo, st + 1)) break;
+	st += 3;
+	if (k >= cinfo->lim_Se) {
 	  WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
 	  entropy->ct = -1;			/* spectral overflow */
 	  return TRUE;
@@ -616,7 +620,7 @@ decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 	if (arith_decode(cinfo, st)) v |= m;
       v += 1; if (sign) v = -v;
       (*block)[natural_order[k]] = (JCOEF) v;
-    }
+    } while (k < cinfo->lim_Se);
   }
 
   return TRUE;
diff --git a/harbour/src/3rd/jpeg/jdatadst.c b/harbour/src/3rd/jpeg/jdatadst.c
index 472d5f3241..6981fb73de 100644
--- a/harbour/src/3rd/jpeg/jdatadst.c
+++ b/harbour/src/3rd/jpeg/jdatadst.c
@@ -2,7 +2,7 @@
  * jdatadst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
+ * Modified 2009-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -128,7 +128,7 @@ empty_mem_output_buffer (j_compress_ptr cinfo)
 
   /* Try to allocate new buffer with double size */
   nextsize = dest->bufsize * 2;
-  nextbuffer = malloc(nextsize);
+  nextbuffer = (JOCTET *) malloc(nextsize);
 
   if (nextbuffer == NULL)
     ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
@@ -256,7 +256,7 @@ jpeg_mem_dest (j_compress_ptr cinfo,
 
   if (*outbuffer == NULL || *outsize == 0) {
     /* Allocate initial buffer */
-    dest->newbuffer = *outbuffer = malloc(OUTPUT_BUF_SIZE);
+    dest->newbuffer = *outbuffer = (unsigned char *) malloc(OUTPUT_BUF_SIZE);
     if (dest->newbuffer == NULL)
       ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
     *outsize = OUTPUT_BUF_SIZE;
diff --git a/harbour/src/3rd/jpeg/jdatasrc.c b/harbour/src/3rd/jpeg/jdatasrc.c
index c8fe3daf33..7be59a88a1 100644
--- a/harbour/src/3rd/jpeg/jdatasrc.c
+++ b/harbour/src/3rd/jpeg/jdatasrc.c
@@ -2,7 +2,7 @@
  * jdatasrc.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2009-2010 by Guido Vollbeding.
+ * Modified 2009-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -121,16 +121,17 @@ fill_input_buffer (j_decompress_ptr cinfo)
 METHODDEF(boolean)
 fill_mem_input_buffer (j_decompress_ptr cinfo)
 {
-  static JOCTET mybuffer[4];
+  static const JOCTET mybuffer[4] = {
+    (JOCTET) 0xFF, (JOCTET) JPEG_EOI, 0, 0
+  };
 
   /* The whole JPEG data is expected to reside in the supplied memory
    * buffer, so any request for more data beyond the given buffer size
    * is treated as an error.
    */
   WARNMS(cinfo, JWRN_JPEG_EOF);
+
   /* Insert a fake EOI marker */
-  mybuffer[0] = (JOCTET) 0xFF;
-  mybuffer[1] = (JOCTET) JPEG_EOI;
 
   cinfo->src->next_input_byte = mybuffer;
   cinfo->src->bytes_in_buffer = 2;
diff --git a/harbour/src/3rd/jpeg/jdcoefct.c b/harbour/src/3rd/jpeg/jdcoefct.c
index 462e92c612..ed02fc378f 100644
--- a/harbour/src/3rd/jpeg/jdcoefct.c
+++ b/harbour/src/3rd/jpeg/jdcoefct.c
@@ -2,6 +2,7 @@
  * jdcoefct.c
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2002-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -162,8 +163,9 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
     for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col;
 	 MCU_col_num++) {
       /* Try to fetch an MCU.  Entropy decoder expects buffer to be zeroed. */
-      jzero_far((void FAR *) coef->MCU_buffer[0],
-		(size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
+      if (cinfo->lim_Se)	/* can bypass in DC only case */
+	FMEMZERO((void FAR *) coef->MCU_buffer[0],
+		 (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
       if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
 	/* Suspension forced; update state counters and exit */
 	coef->MCU_vert_offset = yoffset;
@@ -729,6 +731,9 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
     for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
       coef->MCU_buffer[i] = buffer + i;
     }
+    if (cinfo->lim_Se == 0)	/* DC only case: want to bypass later */
+      FMEMZERO((void FAR *) buffer,
+	       (size_t) (D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)));
     coef->pub.consume_data = dummy_consume_data;
     coef->pub.decompress_data = decompress_onepass;
     coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
diff --git a/harbour/src/3rd/jpeg/jdcolor.c b/harbour/src/3rd/jpeg/jdcolor.c
index 6c04dfe8aa..83e4d069ab 100644
--- a/harbour/src/3rd/jpeg/jdcolor.c
+++ b/harbour/src/3rd/jpeg/jdcolor.c
@@ -2,6 +2,7 @@
  * jdcolor.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -23,20 +24,28 @@ typedef struct {
   int * Cb_b_tab;		/* => table for Cb to B conversion */
   INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
   INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
+
+  /* Private state for RGB->Y conversion */
+  INT32 * rgb_y_tab;		/* => table for RGB to Y conversion */
 } my_color_deconverter;
 
 typedef my_color_deconverter * my_cconvert_ptr;
 
 
 /**************** YCbCr -> RGB conversion: most common case **************/
+/****************   RGB -> Y   conversion: less common case **************/
 
 /*
  * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
  * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
  * The conversion equations to be implemented are therefore
+ *
  *	R = Y                + 1.40200 * Cr
  *	G = Y - 0.34414 * Cb - 0.71414 * Cr
  *	B = Y + 1.77200 * Cb
+ *
+ *	Y = 0.29900 * R + 0.58700 * G + 0.11400 * B
+ *
  * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
  * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
  *
@@ -61,6 +70,18 @@ typedef my_color_deconverter * my_cconvert_ptr;
 #define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
 #define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
 
+/* We allocate one big table for RGB->Y conversion and divide it up into
+ * three parts, instead of doing three alloc_small requests.  This lets us
+ * use a single table base address, which can be held in a register in the
+ * inner loops on many machines (more than can hold all three addresses,
+ * anyway).
+ */
+
+#define R_Y_OFF		0			/* offset to R => Y section */
+#define G_Y_OFF		(1*(MAXJSAMPLE+1))	/* offset to G => Y section */
+#define B_Y_OFF		(2*(MAXJSAMPLE+1))	/* etc. */
+#define TABLE_SIZE	(3*(MAXJSAMPLE+1))
+
 
 /*
  * Initialize tables for YCC->RGB colorspace conversion.
@@ -160,6 +181,98 @@ ycc_rgb_convert (j_decompress_ptr cinfo,
 /**************** Cases other than YCbCr -> RGB **************/
 
 
+/*
+ * Initialize for RGB->grayscale colorspace conversion.
+ */
+
+LOCAL(void)
+build_rgb_y_table (j_decompress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  INT32 * rgb_y_tab;
+  INT32 i;
+
+  /* Allocate and fill in the conversion tables. */
+  cconvert->rgb_y_tab = rgb_y_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(TABLE_SIZE * SIZEOF(INT32)));
+
+  for (i = 0; i <= MAXJSAMPLE; i++) {
+    rgb_y_tab[i+R_Y_OFF] = FIX(0.29900) * i;
+    rgb_y_tab[i+G_Y_OFF] = FIX(0.58700) * i;
+    rgb_y_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF;
+  }
+}
+
+
+/*
+ * Convert RGB to grayscale.
+ */
+
+METHODDEF(void)
+rgb_gray_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_y_tab;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr0[col]);
+      g = GETJSAMPLE(inptr1[col]);
+      b = GETJSAMPLE(inptr2[col]);
+      /* Y */
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * No colorspace change, but conversion from separate-planes
+ * to interleaved representation.
+ */
+
+METHODDEF(void)
+rgb_convert (j_decompress_ptr cinfo,
+	     JSAMPIMAGE input_buf, JDIMENSION input_row,
+	     JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr[RGB_RED]   = inptr0[col];
+      outptr[RGB_GREEN] = inptr1[col];
+      outptr[RGB_BLUE]  = inptr2[col];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
 /*
  * Color conversion for no colorspace change: just copy the data,
  * converting from separate-planes to interleaved representation.
@@ -351,6 +464,9 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
       /* For color->grayscale conversion, only the Y (0) component is needed */
       for (ci = 1; ci < cinfo->num_components; ci++)
 	cinfo->comp_info[ci].component_needed = FALSE;
+    } else if (cinfo->jpeg_color_space == JCS_RGB) {
+      cconvert->pub.color_convert = rgb_gray_convert;
+      build_rgb_y_table(cinfo);
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
@@ -362,8 +478,8 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
       build_ycc_rgb_table(cinfo);
     } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
       cconvert->pub.color_convert = gray_rgb_convert;
-    } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
-      cconvert->pub.color_convert = null_convert;
+    } else if (cinfo->jpeg_color_space == JCS_RGB) {
+      cconvert->pub.color_convert = rgb_convert;
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
diff --git a/harbour/src/3rd/jpeg/jdmaster.c b/harbour/src/3rd/jpeg/jdmaster.c
index 8c1146e4fe..fef72a21b4 100644
--- a/harbour/src/3rd/jpeg/jdmaster.c
+++ b/harbour/src/3rd/jpeg/jdmaster.c
@@ -2,7 +2,7 @@
  * jdmaster.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2002-2009 by Guido Vollbeding.
+ * Modified 2002-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -158,10 +158,8 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
     cinfo->out_color_components = 1;
     break;
   case JCS_RGB:
-#if RGB_PIXELSIZE != 3
     cinfo->out_color_components = RGB_PIXELSIZE;
     break;
-#endif /* else share code with YCbCr */
   case JCS_YCbCr:
     cinfo->out_color_components = 3;
     break;
diff --git a/harbour/src/3rd/jpeg/jmemmgr.c b/harbour/src/3rd/jpeg/jmemmgr.c
index d801b322da..f0e83fb950 100644
--- a/harbour/src/3rd/jpeg/jmemmgr.c
+++ b/harbour/src/3rd/jpeg/jmemmgr.c
@@ -2,6 +2,7 @@
  * jmemmgr.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -821,7 +822,7 @@ access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr,
       undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
       end_row -= ptr->cur_start_row;
       while (undef_row < end_row) {
-	jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
+	FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
 	undef_row++;
       }
     } else {
@@ -906,7 +907,7 @@ access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr,
       undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
       end_row -= ptr->cur_start_row;
       while (undef_row < end_row) {
-	jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
+	FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
 	undef_row++;
       }
     } else {
diff --git a/harbour/src/3rd/jpeg/jmorecfg.h b/harbour/src/3rd/jpeg/jmorecfg.h
index 4e24d6d881..089345bf48 100644
--- a/harbour/src/3rd/jpeg/jmorecfg.h
+++ b/harbour/src/3rd/jpeg/jmorecfg.h
@@ -2,7 +2,7 @@
  * jmorecfg.h
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2009 by Guido Vollbeding.
+ * Modified 1997-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -321,9 +321,7 @@ typedef int boolean;
  * the offsets will also change the order in which colormap data is organized.
  * RESTRICTIONS:
  * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats.
- * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not
- *    useful if you are using JPEG color spaces other than YCbCr or grayscale.
- * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE
+ * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE
  *    is not 3 (they don't understand about dummy color components!).  So you
  *    can't use color quantization if you change that value.
  */
diff --git a/harbour/src/3rd/jpeg/jpeg.dif b/harbour/src/3rd/jpeg/jpeg.dif
index e74be91022..c27e135faf 100644
--- a/harbour/src/3rd/jpeg/jpeg.dif
+++ b/harbour/src/3rd/jpeg/jpeg.dif
@@ -1,6 +1,6 @@
-diff -urN jpeg.orig/jmorecfg.h jpeg/jmorecfg.h
---- jpeg.orig/jmorecfg.h	2011-01-18 16:05:06.996240502 +0100
-+++ jpeg/jmorecfg.h	2011-01-18 16:05:07.796243696 +0100
+diff -urN jpeg.orig\jmorecfg.h jpeg\jmorecfg.h
+--- jpeg.orig\jmorecfg.h	Tue Feb 07 22:07:47 2012
++++ jpeg\jmorecfg.h	Tue Feb 07 22:07:48 2012
 @@ -138,7 +138,9 @@
  #ifdef CHAR_IS_UNSIGNED
  typedef char UINT8;
diff --git a/harbour/src/3rd/jpeg/jpegint.h b/harbour/src/3rd/jpeg/jpegint.h
index 0c27a4e4a0..c0d5c14202 100644
--- a/harbour/src/3rd/jpeg/jpegint.h
+++ b/harbour/src/3rd/jpeg/jpegint.h
@@ -2,7 +2,7 @@
  * jpegint.h
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2009 by Guido Vollbeding.
+ * Modified 1997-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -321,21 +321,41 @@ struct jpeg_color_quantizer {
 #define jinit_memory_mgr	jIMemMgr
 #define jdiv_round_up		jDivRound
 #define jround_up		jRound
+#define jzero_far		jZeroFar
 #define jcopy_sample_rows	jCopySamples
 #define jcopy_block_row		jCopyBlocks
-#define jzero_far		jZeroFar
 #define jpeg_zigzag_order	jZIGTable
 #define jpeg_natural_order	jZAGTable
-#define jpeg_natural_order7	jZAGTable7
-#define jpeg_natural_order6	jZAGTable6
-#define jpeg_natural_order5	jZAGTable5
-#define jpeg_natural_order4	jZAGTable4
-#define jpeg_natural_order3	jZAGTable3
-#define jpeg_natural_order2	jZAGTable2
+#define jpeg_natural_order7	jZAG7Table
+#define jpeg_natural_order6	jZAG6Table
+#define jpeg_natural_order5	jZAG5Table
+#define jpeg_natural_order4	jZAG4Table
+#define jpeg_natural_order3	jZAG3Table
+#define jpeg_natural_order2	jZAG2Table
 #define jpeg_aritab		jAriTab
 #endif /* NEED_SHORT_EXTERNAL_NAMES */
 
 
+/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays
+ * and coefficient-block arrays.  This won't work on 80x86 because the arrays
+ * are FAR and we're assuming a small-pointer memory model.  However, some
+ * DOS compilers provide far-pointer versions of memcpy() and memset() even
+ * in the small-model libraries.  These will be used if USE_FMEM is defined.
+ * Otherwise, the routines in jutils.c do it the hard way.
+ */
+
+#ifndef NEED_FAR_POINTERS	/* normal case, same as regular macro */
+#define FMEMZERO(target,size)	MEMZERO(target,size)
+#else				/* 80x86 case */
+#ifdef USE_FMEM
+#define FMEMZERO(target,size)	_fmemset((void FAR *)(target), 0, (size_t)(size))
+#else
+EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
+#define FMEMZERO(target,size)	jzero_far(target, size)
+#endif
+#endif
+
+
 /* Compression module initialization routines */
 EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo,
@@ -381,7 +401,6 @@ EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row,
 				    int num_rows, JDIMENSION num_cols));
 EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
 				  JDIMENSION num_blocks));
-EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
 /* Constant tables in jutils.c */
 #if 0				/* This table is not actually needed in v6a */
 extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
diff --git a/harbour/src/3rd/jpeg/jpeglib.h b/harbour/src/3rd/jpeg/jpeglib.h
index 1eb1fac033..1327cffa96 100644
--- a/harbour/src/3rd/jpeg/jpeglib.h
+++ b/harbour/src/3rd/jpeg/jpeglib.h
@@ -2,7 +2,7 @@
  * jpeglib.h
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2002-2010 by Guido Vollbeding.
+ * Modified 2002-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,7 +39,7 @@ extern "C" {
 
 #define JPEG_LIB_VERSION        80	/* Compatibility version 8.0 */
 #define JPEG_LIB_VERSION_MAJOR  8
-#define JPEG_LIB_VERSION_MINOR  3
+#define JPEG_LIB_VERSION_MINOR  4
 
 
 /* Various constants determining the sizes of things.
@@ -47,7 +47,7 @@ extern "C" {
  * if you want to be compatible.
  */
 
-#define DCTSIZE		    8	/* The basic DCT block is 8x8 samples */
+#define DCTSIZE		    8	/* The basic DCT block is 8x8 coefficients */
 #define DCTSIZE2	    64	/* DCTSIZE squared; # of elements in a block */
 #define NUM_QUANT_TBLS      4	/* Quantization tables are numbered 0..3 */
 #define NUM_HUFF_TBLS       4	/* Huffman tables are numbered 0..3 */
diff --git a/harbour/src/3rd/jpeg/jquant1.c b/harbour/src/3rd/jpeg/jquant1.c
index b2f96aa15d..9d11f70669 100644
--- a/harbour/src/3rd/jpeg/jquant1.c
+++ b/harbour/src/3rd/jpeg/jquant1.c
@@ -2,6 +2,7 @@
  * jquant1.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -530,8 +531,8 @@ quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
 
   for (row = 0; row < num_rows; row++) {
     /* Initialize output values to 0 so can process components separately */
-    jzero_far((void FAR *) output_buf[row],
-	      (size_t) (width * SIZEOF(JSAMPLE)));
+    FMEMZERO((void FAR *) output_buf[row],
+	     (size_t) (width * SIZEOF(JSAMPLE)));
     row_index = cquantize->row_index;
     for (ci = 0; ci < nc; ci++) {
       input_ptr = input_buf[row] + ci;
@@ -635,8 +636,8 @@ quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
 
   for (row = 0; row < num_rows; row++) {
     /* Initialize output values to 0 so can process components separately */
-    jzero_far((void FAR *) output_buf[row],
-	      (size_t) (width * SIZEOF(JSAMPLE)));
+    FMEMZERO((void FAR *) output_buf[row],
+	     (size_t) (width * SIZEOF(JSAMPLE)));
     for (ci = 0; ci < nc; ci++) {
       input_ptr = input_buf[row] + ci;
       output_ptr = output_buf[row];
@@ -781,7 +782,7 @@ start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan)
     /* Initialize the propagated errors to zero. */
     arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR));
     for (i = 0; i < cinfo->out_color_components; i++)
-      jzero_far((void FAR *) cquantize->fserrors[i], arraysize);
+      FMEMZERO((void FAR *) cquantize->fserrors[i], arraysize);
     break;
   default:
     ERREXIT(cinfo, JERR_NOT_COMPILED);
diff --git a/harbour/src/3rd/jpeg/jquant2.c b/harbour/src/3rd/jpeg/jquant2.c
index af601e334b..38fc2af7a5 100644
--- a/harbour/src/3rd/jpeg/jquant2.c
+++ b/harbour/src/3rd/jpeg/jquant2.c
@@ -2,6 +2,7 @@
  * jquant2.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -1203,7 +1204,7 @@ start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan)
 	cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large)
 	  ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize);
       /* Initialize the propagated errors to zero. */
-      jzero_far((void FAR *) cquantize->fserrors, arraysize);
+      FMEMZERO((void FAR *) cquantize->fserrors, arraysize);
       /* Make the error-limit table if we didn't already. */
       if (cquantize->error_limiter == NULL)
 	init_error_limit(cinfo);
@@ -1214,8 +1215,8 @@ start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan)
   /* Zero the histogram or inverse color map, if necessary */
   if (cquantize->needs_zeroed) {
     for (i = 0; i < HIST_C0_ELEMS; i++) {
-      jzero_far((void FAR *) histogram[i],
-		HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell));
+      FMEMZERO((void FAR *) histogram[i],
+	       HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell));
     }
     cquantize->needs_zeroed = FALSE;
   }
diff --git a/harbour/src/3rd/jpeg/jutils.c b/harbour/src/3rd/jpeg/jutils.c
index 04351797cd..5b16b6d03c 100644
--- a/harbour/src/3rd/jpeg/jutils.c
+++ b/harbour/src/3rd/jpeg/jutils.c
@@ -2,7 +2,7 @@
  * jutils.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
+ * Modified 2009-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -148,13 +148,27 @@ jround_up (long a, long b)
  * is not all that great, because these routines aren't very heavily used.)
  */
 
-#ifndef NEED_FAR_POINTERS	/* normal case, same as regular macros */
+#ifndef NEED_FAR_POINTERS	/* normal case, same as regular macro */
 #define FMEMCOPY(dest,src,size)	MEMCOPY(dest,src,size)
-#define FMEMZERO(target,size)	MEMZERO(target,size)
 #else				/* 80x86 case, define if we can */
 #ifdef USE_FMEM
 #define FMEMCOPY(dest,src,size)	_fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size))
-#define FMEMZERO(target,size)	_fmemset((void FAR *)(target), 0, (size_t)(size))
+#else
+/* This function is for use by the FMEMZERO macro defined in jpegint.h.
+ * Do not call this function directly, use the FMEMZERO macro instead.
+ */
+GLOBAL(void)
+jzero_far (void FAR * target, size_t bytestozero)
+/* Zero out a chunk of FAR memory. */
+/* This might be sample-array data, block-array data, or alloc_large data. */
+{
+  register char FAR * ptr = (char FAR *) target;
+  register size_t count;
+
+  for (count = bytestozero; count > 0; count--) {
+    *ptr++ = 0;
+  }
+}
 #endif
 #endif
 
@@ -211,21 +225,3 @@ jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row,
   }
 #endif
 }
-
-
-GLOBAL(void)
-jzero_far (void FAR * target, size_t bytestozero)
-/* Zero out a chunk of FAR memory. */
-/* This might be sample-array data, block-array data, or alloc_large data. */
-{
-#ifdef FMEMZERO
-  FMEMZERO(target, bytestozero);
-#else
-  register char FAR * ptr = (char FAR *) target;
-  register size_t count;
-
-  for (count = bytestozero; count > 0; count--) {
-    *ptr++ = 0;
-  }
-#endif
-}
diff --git a/harbour/src/3rd/jpeg/jversion.h b/harbour/src/3rd/jpeg/jversion.h
index e868538c88..5d4915103e 100644
--- a/harbour/src/3rd/jpeg/jversion.h
+++ b/harbour/src/3rd/jpeg/jversion.h
@@ -1,7 +1,7 @@
 /*
  * jversion.h
  *
- * Copyright (C) 1991-2011, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -9,6 +9,6 @@
  */
 
 
-#define JVERSION	"8c  16-Jan-2011"
+#define JVERSION	"8d  15-Jan-2012"
 
-#define JCOPYRIGHT	"Copyright (C) 2011, Thomas G. Lane, Guido Vollbeding"
+#define JCOPYRIGHT	"Copyright (C) 2012, Thomas G. Lane, Guido Vollbeding"
diff --git a/harbour/src/3rd/jpeg/transupp.c b/harbour/src/3rd/jpeg/transupp.c
index 4060544828..016f383d4f 100644
--- a/harbour/src/3rd/jpeg/transupp.c
+++ b/harbour/src/3rd/jpeg/transupp.c
@@ -1,7 +1,7 @@
 /*
  * transupp.c
  *
- * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -771,7 +771,7 @@ jt_read_integer (const char ** strptr, JDIMENSION * result)
  * The routine returns TRUE if the spec string is valid, FALSE if not.
  *
  * The crop spec string should have the format
- *	<width>x<height>{+-}<xoffset>{+-}<yoffset>
+ *	<width>[f]x<height>[f]{+-}<xoffset>{+-}<yoffset>
  * where width, height, xoffset, and yoffset are unsigned integers.
  * Each of the elements can be omitted to indicate a default value.
  * (A weakness of this style is that it is not possible to omit xoffset
@@ -793,14 +793,22 @@ jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec)
     /* fetch width */
     if (! jt_read_integer(&spec, &info->crop_width))
       return FALSE;
-    info->crop_width_set = JCROP_POS;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_width_set = JCROP_FORCE;
+    } else
+      info->crop_width_set = JCROP_POS;
   }
-  if (*spec == 'x' || *spec == 'X') {	
+  if (*spec == 'x' || *spec == 'X') {
     /* fetch height */
     spec++;
     if (! jt_read_integer(&spec, &info->crop_height))
       return FALSE;
-    info->crop_height_set = JCROP_POS;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_height_set = JCROP_FORCE;
+    } else
+      info->crop_height_set = JCROP_POS;
   }
   if (*spec == '+' || *spec == '-') {
     /* fetch xoffset */
@@ -980,10 +988,16 @@ jtransform_request_workspace (j_decompress_ptr srcinfo,
     else
       yoffset = info->crop_yoffset;
     /* Now adjust so that upper left corner falls at an iMCU boundary */
-    info->output_width =
-      info->crop_width + (xoffset % info->iMCU_sample_width);
-    info->output_height =
-      info->crop_height + (yoffset % info->iMCU_sample_height);
+    if (info->crop_width_set == JCROP_FORCE)
+      info->output_width = info->crop_width;
+    else
+      info->output_width =
+        info->crop_width + (xoffset % info->iMCU_sample_width);
+    if (info->crop_height_set == JCROP_FORCE)
+      info->output_height = info->crop_height;
+    else
+      info->output_height =
+        info->crop_height + (yoffset % info->iMCU_sample_height);
     /* Save x/y offsets measured in iMCUs */
     info->x_crop_offset = xoffset / info->iMCU_sample_width;
     info->y_crop_offset = yoffset / info->iMCU_sample_height;
diff --git a/harbour/src/3rd/jpeg/transupp.h b/harbour/src/3rd/jpeg/transupp.h
index 7c16c19c44..9aa0af385a 100644
--- a/harbour/src/3rd/jpeg/transupp.h
+++ b/harbour/src/3rd/jpeg/transupp.h
@@ -1,7 +1,7 @@
 /*
  * transupp.h
  *
- * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -57,6 +57,7 @@
  * corner up and/or left to make it so, simultaneously increasing the region
  * dimensions to keep the lower right crop corner unchanged.  (Thus, the
  * output image covers at least the requested region, but may cover more.)
+ * The adjustment of the region dimensions may be optionally disabled.
  *
  * We also provide a lossless-resize option, which is kind of a lossless-crop
  * operation in the DCT coefficient block domain - it discards higher-order
@@ -106,13 +107,15 @@ typedef enum {
 
 /*
  * Codes for crop parameters, which can individually be unspecified,
- * positive, or negative.  (Negative width or height makes no sense, though.)
+ * positive or negative for xoffset or yoffset,
+ * positive or forced for width or height.
  */
 
 typedef enum {
-	JCROP_UNSET,
-	JCROP_POS,
-	JCROP_NEG
+        JCROP_UNSET,
+        JCROP_POS,
+        JCROP_NEG,
+        JCROP_FORCE
 } JCROP_CODE;
 
 /*
@@ -133,9 +136,9 @@ typedef struct {
    * These can be filled in by jtransform_parse_crop_spec().
    */
   JDIMENSION crop_width;	/* Width of selected region */
-  JCROP_CODE crop_width_set;
+  JCROP_CODE crop_width_set;	/* (forced disables adjustment) */
   JDIMENSION crop_height;	/* Height of selected region */
-  JCROP_CODE crop_height_set;
+  JCROP_CODE crop_height_set;	/* (forced disables adjustment) */
   JDIMENSION crop_xoffset;	/* X offset of selected region */
   JCROP_CODE crop_xoffset_set;	/* (negative measures from right edge) */
   JDIMENSION crop_yoffset;	/* Y offset of selected region */