From b2f93a309a0dc563b846dca031095b4d29d2bbf4 Mon Sep 17 00:00:00 2001 From: Mindaugas Kavaliauskas Date: Tue, 15 Jan 2008 23:23:34 +0000 Subject: [PATCH] 2008-01-16 01:20 UTC+0200 Mindaugas Kavaliauskas (dbtopas/at/dbtopas.lt) + harbout/contrib/hbzlib + added support for zlib library and zip files (based on minizip) + harbour/contrib/hbzlib/zconf.h + harbour/contrib/hbzlib/zlib.h + zlib include files + harbour/contrib/hbzlib/zip.h + harbour/contrib/hbzlib/unzip.h + minizip include files + harbour/contrib/hbzlib/ioapi.c + harbour/contrib/hbzlib/zip.c + harbour/contrib/hbzlib/unzip.c + minizip source files. Some fixes are applied to avoid compile time warning and errors, see readme.txt for list ; I've compiled with BCC only, please, check other compilers + harbour/contrib/hbzlib/hbzlib.c + zlib wrapper functions. Przemyslaw Czerpak is author of this code. The file was posted to developers mailing list on 2007-05-17. I think licence statments in the begining of file gives permission to include it into SVN. * HB_UNCOMPRESSLEN() function added. Source copied from Przemyslaw's email on 2008-01-10. + harbour/contrib/hbzlib/hbmzip.c + wrapper functions for minizip library Function names uses convention: - HB_ZIP*() - manages compression of .zip file: HB_ZIPOPEN(), HB_ZIPCLOSE() - HB_ZIPFILE*() - manages compression of files inside .zip: HB_ZIPFILECREATE(), HB_ZIPFILEWRITE(), HB_ZIPFILECLOSE() - HB_UNZIP*() - manages decompression of .zip fileL HB_UNZIPOPEN(), HB_UNZIPCLOSE() - HB_UNZIPFILE*() - manages decompression of files inside .zip HB_UNZIPFILEOPEN(), HB_UNZIPFILEREAD(), HB_UNZIPFILECLOSE(), HB_UNZIPFILEFIRST(), HB_UNZIPFILENEXT(), HB_UNZIPFILEPOS(), HB_UNZIPFILEGOTO(), HB_UNZIPFILEINFO() Parameters of functions are documented inside source files. + implemented some higher level functions. These function are not wrapper of minizip: HB_ZIPSTOREFILE(), HB_UNZIPEXTRACTCURRENTFILE() ; minizip gives low level access on zip files. This could be a problem if you not going to put your fingers on internals, but just want to compress/decompress files. Because managing of file attributes is a little complicated. These higher level functions do the job. ; please test code under linux. Source is written using docs only, without test or deeper knowledge. + harbour/contrib/hbzlib/hbzlib.ch + defines for zlib and minizip libraries ; I've used HB_ZLIB_* and HB_ZIP_* prefixes, because some original names of minizip library are too general, ex., APPEND_STATUS_CREATE If you want to use original define names we change this. + harbour/contrib/hbzlib/readme.txt * some comments on the source of libraries and ChangeLog for minizip files + harbour/contrib/hbzlib/tests/myzip.prg + harbour/contrib/hbzlib/tests/myunzip.prg + tiny compression/decompression utilities written in Harbour + harbour/contrib/hbzlib/Makefile + harbour/contrib/hbzlib/make_b32.bat + harbour/contrib/hbzlib/make_vc.bat + makefiles written using another contrib's makefiles as template ; I'm not makefiles guru, please test it. I've also used command line parameters: -DNOCRYPT -DNOUNCRYPT, to compile minizip. I don't know howto include these to our makefiles --- harbour/ChangeLog | 66 + harbour/contrib/hbzlib/Makefile | 19 + harbour/contrib/hbzlib/hbmzip.c | 764 +++++++++++ harbour/contrib/hbzlib/hbzlib.c | 520 +++++++ harbour/contrib/hbzlib/hbzlib.ch | 70 + harbour/contrib/hbzlib/ioapi.c | 198 +++ harbour/contrib/hbzlib/ioapi.h | 75 + harbour/contrib/hbzlib/make_b32.bat | 6 + harbour/contrib/hbzlib/make_vc.bat | 6 + harbour/contrib/hbzlib/readme.txt | 50 + harbour/contrib/hbzlib/tests/myunzip.prg | 96 ++ harbour/contrib/hbzlib/tests/myzip.prg | 87 ++ harbour/contrib/hbzlib/unzip.c | 1599 ++++++++++++++++++++++ harbour/contrib/hbzlib/unzip.h | 354 +++++ harbour/contrib/hbzlib/zconf.h | 332 +++++ harbour/contrib/hbzlib/zip.c | 1231 +++++++++++++++++ harbour/contrib/hbzlib/zip.h | 235 ++++ harbour/contrib/hbzlib/zlib.h | 1357 ++++++++++++++++++ 18 files changed, 7065 insertions(+) create mode 100644 harbour/contrib/hbzlib/Makefile create mode 100644 harbour/contrib/hbzlib/hbmzip.c create mode 100644 harbour/contrib/hbzlib/hbzlib.c create mode 100644 harbour/contrib/hbzlib/hbzlib.ch create mode 100644 harbour/contrib/hbzlib/ioapi.c create mode 100644 harbour/contrib/hbzlib/ioapi.h create mode 100644 harbour/contrib/hbzlib/make_b32.bat create mode 100644 harbour/contrib/hbzlib/make_vc.bat create mode 100644 harbour/contrib/hbzlib/readme.txt create mode 100644 harbour/contrib/hbzlib/tests/myunzip.prg create mode 100644 harbour/contrib/hbzlib/tests/myzip.prg create mode 100644 harbour/contrib/hbzlib/unzip.c create mode 100644 harbour/contrib/hbzlib/unzip.h create mode 100644 harbour/contrib/hbzlib/zconf.h create mode 100644 harbour/contrib/hbzlib/zip.c create mode 100644 harbour/contrib/hbzlib/zip.h create mode 100644 harbour/contrib/hbzlib/zlib.h diff --git a/harbour/ChangeLog b/harbour/ChangeLog index be3334c0d1..e9a2d8a5b8 100644 --- a/harbour/ChangeLog +++ b/harbour/ChangeLog @@ -8,6 +8,72 @@ 2002-12-01 13:30 UTC+0100 Foo Bar */ +2008-01-16 01:20 UTC+0200 Mindaugas Kavaliauskas (dbtopas/at/dbtopas.lt) + + harbout/contrib/hbzlib + + added support for zlib library and zip files (based on + minizip) + + harbour/contrib/hbzlib/zconf.h + + harbour/contrib/hbzlib/zlib.h + + zlib include files + + harbour/contrib/hbzlib/zip.h + + harbour/contrib/hbzlib/unzip.h + + minizip include files + + harbour/contrib/hbzlib/ioapi.c + + harbour/contrib/hbzlib/zip.c + + harbour/contrib/hbzlib/unzip.c + + minizip source files. Some fixes are applied to avoid compile + time warning and errors, see readme.txt for list + ; I've compiled with BCC only, please, check other compilers + + harbour/contrib/hbzlib/hbzlib.c + + zlib wrapper functions. Przemyslaw Czerpak is author of this code. + The file was posted to developers mailing list on 2007-05-17. + I think licence statments in the begining of file gives permission + to include it into SVN. + * HB_UNCOMPRESSLEN() function added. Source copied from Przemyslaw's + email on 2008-01-10. + + harbour/contrib/hbzlib/hbmzip.c + + wrapper functions for minizip library + Function names uses convention: + - HB_ZIP*() - manages compression of .zip file: + HB_ZIPOPEN(), HB_ZIPCLOSE() + - HB_ZIPFILE*() - manages compression of files inside .zip: + HB_ZIPFILECREATE(), HB_ZIPFILEWRITE(), HB_ZIPFILECLOSE() + - HB_UNZIP*() - manages decompression of .zip fileL + HB_UNZIPOPEN(), HB_UNZIPCLOSE() + - HB_UNZIPFILE*() - manages decompression of files inside .zip + HB_UNZIPFILEOPEN(), HB_UNZIPFILEREAD(), HB_UNZIPFILECLOSE(), + HB_UNZIPFILEFIRST(), HB_UNZIPFILENEXT(), HB_UNZIPFILEPOS(), + HB_UNZIPFILEGOTO(), HB_UNZIPFILEINFO() + Parameters of functions are documented inside source files. + + implemented some higher level functions. These function are not + wrapper of minizip: + HB_ZIPSTOREFILE(), HB_UNZIPEXTRACTCURRENTFILE() + ; minizip gives low level access on zip files. This could be a + problem if you not going to put your fingers on internals, but + just want to compress/decompress files. Because managing of + file attributes is a little complicated. These higher level + functions do the job. + ; please test code under linux. Source is written using docs only, + without test or deeper knowledge. + + harbour/contrib/hbzlib/hbzlib.ch + + defines for zlib and minizip libraries + ; I've used HB_ZLIB_* and HB_ZIP_* prefixes, because some original + names of minizip library are too general, ex., APPEND_STATUS_CREATE + If you want to use original define names we change this. + + harbour/contrib/hbzlib/readme.txt + * some comments on the source of libraries and ChangeLog for minizip + files + + harbour/contrib/hbzlib/tests/myzip.prg + + harbour/contrib/hbzlib/tests/myunzip.prg + + tiny compression/decompression utilities written in Harbour + + harbour/contrib/hbzlib/Makefile + + harbour/contrib/hbzlib/make_b32.bat + + harbour/contrib/hbzlib/make_vc.bat + + makefiles written using another contrib's makefiles as template + ; I'm not makefiles guru, please test it. I've also used command line + parameters: -DNOCRYPT -DNOUNCRYPT, to compile minizip. I don't know + howto include these to our makefiles + 2008-01-15 19:30 UTC+0100 Tomaz Zupan (tomaz.zupan/at/orpo.si) * harbour.spec * Recognize more Mandriva releases diff --git a/harbour/contrib/hbzlib/Makefile b/harbour/contrib/hbzlib/Makefile new file mode 100644 index 0000000000..0f575c80a3 --- /dev/null +++ b/harbour/contrib/hbzlib/Makefile @@ -0,0 +1,19 @@ +# +# $Id$ +# + +ROOT = ../../ + +C_SOURCES =\ + ioapi.c \ + zip.c \ + unzip.c \ + hbzlib.c \ + hbmzip.c + +PRG_HEADERS=\ + hbzlib.ch + +LIBNAME=hbzlib + +include $(TOP)$(ROOT)config/lib.cf diff --git a/harbour/contrib/hbzlib/hbmzip.c b/harbour/contrib/hbzlib/hbmzip.c new file mode 100644 index 0000000000..15ac78cf71 --- /dev/null +++ b/harbour/contrib/hbzlib/hbmzip.c @@ -0,0 +1,764 @@ +/* + * $Id$ + */ + +/* + * Harbour Project source code: + * Wrapper functions for minizip library + * Some higher level zip archive functions + * + * Copyright 2008 Mindaugas Kavaliauskas + * www - http://www.harbour-project.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA (or visit the web site http://www.gnu.org/). + * + * As a special exception, the Harbour Project gives permission for + * additional uses of the text contained in its release of Harbour. + * + * The exception is that, if you link the Harbour libraries with other + * files to produce an executable, this does not by itself cause the + * resulting executable to be covered by the GNU General Public License. + * Your use of that executable is in no way restricted on account of + * linking the Harbour library code into it. + * + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + * + * This exception applies only to the code released by the Harbour + * Project under the name Harbour. If you copy code from other + * Harbour Project or Free Software Foundation releases into a copy of + * Harbour, as the General Public License permits, the exception does + * not apply to the code that you add in this way. To avoid misleading + * anyone as to the status of such modified files, you must delete + * this exception notice from them. + * + * If you write modifications of your own for Harbour, it is your choice + * whether to permit this exception to apply to your modifications. + * If you do not wish that, delete this exception notice. + * + */ + + +#include "hbapi.h" +#include "hbapiitm.h" +#include "hbapierr.h" +#include "hbdate.h" +#include "hbset.h" +#include "zip.h" +#include "unzip.h" + +#if defined( HB_OS_WIN_32 ) + #include "windows.h" +#elif defined( HB_OS_UNIX ) + #include + #include +#endif + + +static HB_GARBAGE_FUNC( hb_zipfile_destructor ) +{ + zipFile* phZip = (zipFile*) Cargo; + + if( * phZip ) + { + zipClose( * phZip, NULL ); + * phZip = NULL; + } +} + + +static gzFile hb_zipfileParam( int iParam ) +{ + zipFile* phZip = hb_parptrGC( hb_zipfile_destructor, iParam ); + + if( phZip && * phZip ) + return * phZip; + + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); + return NULL; +} + + +static HB_GARBAGE_FUNC( hb_unzipfile_destructor ) +{ + unzFile* phUnzip = (unzFile*) Cargo; + + if( * phUnzip ) + { + unzClose( * phUnzip ); + * phUnzip = NULL; + } +} + + +static gzFile hb_unzipfileParam( int iParam ) +{ + unzFile* phUnzip = hb_parptrGC( hb_unzipfile_destructor, iParam ); + + if( phUnzip && * phUnzip ) + return * phUnzip; + + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); + return NULL; +} + + + +/* HB_ZipOpen( cFileName, [ iMode = HB_ZIP_CREATE ] ) --> hZip */ +HB_FUNC( HB_ZIPOPEN ) +{ + char* szFileName = hb_parc( 1 ); + int iMode = APPEND_STATUS_CREATE; + + if( ISNUM( 2 ) ) + iMode = hb_parni( 2 ); + + if( szFileName ) + { + zipFile hZip = zipOpen( szFileName, iMode ); + if( hZip ) + { + zipFile* phZip = (zipFile*) hb_gcAlloc( sizeof( zipFile ), hb_zipfile_destructor ); + + * phZip = hZip; + hb_retptrGC( phZip ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +/* HB_ZipClose( hZip ) --> nError */ +HB_FUNC( HB_ZIPCLOSE ) +{ + zipFile* phZip = hb_parptrGC( hb_zipfile_destructor, 1 ); + + if( phZip && * phZip ) + { + zipFile hZip = * phZip; + + * phZip = NULL; + hb_retni( zipClose( hZip, NULL ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +/* HB_ZipFileCreate( hZip, cZipName, dDate, cTime, nInternalAttr, nExternalAttr, + [ nMethod = HB_ZLIB_METHOD_DEFLATE ], + [ nLevel = HB_ZLIB_COMPRESSION_DEFAULT ] ) --> nError */ +HB_FUNC( HB_ZIPFILECREATE ) +{ + char* szZipName = hb_parc( 2 ); + int iMethod = Z_DEFLATED, iLevel = Z_DEFAULT_COMPRESSION, iY, iM, iD; + + + if( szZipName ) + { + zipFile hZip = hb_zipfileParam( 1 ); + zip_fileinfo zfi; + + memset( &zfi, 0, sizeof( zfi ) ); + + hb_dateDecode( hb_pardl( 3 ), &iY, &iM, &iD ); + zfi.tmz_date.tm_year = iY; + zfi.tmz_date.tm_mon = iM - 1; + zfi.tmz_date.tm_mday = iD; + + hb_timeStrGet( hb_parc( 4 ), &iY, &iM, &iD, NULL ); + zfi.tmz_date.tm_hour = iY; + zfi.tmz_date.tm_min = iM; + zfi.tmz_date.tm_sec = iD; + + if( ISNUM( 7 ) ) + iMethod = hb_parni( 7 ); + + if( ISNUM( 8 ) ) + iLevel = hb_parni( 8 ); + + if( hZip ) + hb_retni( zipOpenNewFileInZip( hZip, szZipName, &zfi, + NULL, 0, NULL, 0, NULL, iMethod, iLevel ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +/* HB_ZipFileWrite( hZip, cData [, nLen ] ) --> nError */ +HB_FUNC( HB_ZIPFILEWRITE ) +{ + char* pData = hb_parc( 2 ); + + if( pData ) + { + zipFile hZip = hb_zipfileParam( 1 ); + ULONG ulLen = hb_parclen( 2 ); + + if( ISNUM( 3 ) && (ULONG) hb_parnl( 3 ) < ulLen ) + ulLen = (ULONG) hb_parnl( 3 ); + + if( hZip ) + hb_retni( zipWriteInFileInZip( hZip, (void*) pData, ulLen ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +/* HB_ZipFileClose( hZip ) --> nError */ +HB_FUNC( HB_ZIPFILECLOSE ) +{ + zipFile hZip = hb_zipfileParam( 1 ); + + if( hZip ) + hb_retni( zipCloseFileInZip( hZip ) ); +} + + +/* HB_UnzipOpen( cFileName ) --> hUnzip */ +HB_FUNC( HB_UNZIPOPEN ) +{ + char* szFileName = hb_parc( 1 ); + + if( szFileName ) + { + unzFile hUnzip = unzOpen( szFileName ); + if( hUnzip ) + { + unzFile* phUnzip = (unzFile*) hb_gcAlloc( sizeof( unzFile ), hb_unzipfile_destructor ); + + * phUnzip = hUnzip; + hb_retptrGC( phUnzip ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +/* HB_UnzipClose( hUnzip ) --> nError */ +HB_FUNC( HB_UNZIPCLOSE ) +{ + unzFile* phUnzip = hb_parptrGC( hb_unzipfile_destructor, 1 ); + + if( phUnzip && * phUnzip ) + { + unzFile hUnzip = * phUnzip; + + * phUnzip = NULL; + hb_retni( unzClose( hUnzip ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +/* HB_UnzipFileFirst( hUnzip ) --> nError */ +HB_FUNC( HB_UNZIPFILEFIRST ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + + if( hUnzip ) + hb_retni( unzGoToFirstFile( hUnzip ) ); +} + + +/* HB_UnzipFileNext( hUnzip ) --> nError */ +HB_FUNC( HB_UNZIPFILENEXT ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + + if( hUnzip ) + hb_retni( unzGoToNextFile( hUnzip ) ); +} + + +/* HB_UnzipFilePos( hUnzip ) --> nPosition */ +HB_FUNC( HB_UNZIPFILEPOS ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + + if( hUnzip ) + hb_retnint( unzGetOffset( hUnzip ) ); +} + + +/* HB_UnzipFileGoto( hUnzip, nPosition ) --> nError */ +HB_FUNC( HB_UNZIPFILEGOTO ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + + if( hUnzip ) + hb_retni( unzSetOffset( hUnzip, (ULONG) hb_parnint( 2 ) ) ); +} + + +/* HB_UnzipFileInfo( hUnzip, @cZipName, @dDate, @cTime, @nInternalAttr, @nExternalAttr, + @nMethod, @nSize, @nCompressedSize ) --> nError */ +HB_FUNC( HB_UNZIPFILEINFO ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + char szFileName[ _POSIX_PATH_MAX + 1 ]; + unz_file_info ufi; + int iResult; + PHB_ITEM pItem; + char buf[ 16 ]; + + if( hUnzip ) + { + iResult = unzGetCurrentFileInfo( hUnzip, &ufi, szFileName, _POSIX_PATH_MAX, + NULL, 0, NULL, 0 ); + hb_retni( iResult ); + + if ( iResult == UNZ_OK ) + { + hb_storc( szFileName, 2 ); + + pItem = hb_itemPutD( NULL, ufi.tmu_date.tm_year, ufi.tmu_date.tm_mon + 1, + ufi.tmu_date.tm_mday ); + hb_itemParamStoreForward( 3, pItem ); + hb_itemRelease( pItem ); + + + snprintf( buf, sizeof( buf ), "%02d:%02d:%02d", ufi.tmu_date.tm_hour, + ufi.tmu_date.tm_min, ufi.tmu_date.tm_sec ); + hb_storc( buf, 4 ); + hb_stornl( ufi.internal_fa, 5 ); + hb_stornl( ufi.external_fa, 6 ); + hb_stornl( ufi.compression_method, 7 ); + hb_stornl( ufi.uncompressed_size, 8 ); + hb_stornl( ufi.compressed_size, 9 ); + } + else + { + hb_storc( "", 2 ); + + pItem = hb_itemPutDL( NULL, 0 ); + hb_itemParamStoreForward( 3, pItem ); + hb_itemRelease( pItem ); + + hb_storc( "", 4 ); + hb_stornl( 0, 5 ); + hb_stornl( 0, 6 ); + hb_stornl( 0, 7 ); + hb_stornl( 0, 8 ); + hb_stornl( 0, 9 ); + } + } +} + + +/* HB_UnzipFileOpen( hUnzip ) --> nError */ +HB_FUNC( HB_UNZIPFILEOPEN ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + + if( hUnzip ) + hb_retni( unzOpenCurrentFile( hUnzip ) ); +} + + +/* HB_UnzipFileRead( hUnzip, @cBuf [, nLen ] ) --> nRead */ +HB_FUNC( HB_UNZIPFILEREAD ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + PHB_ITEM pBuffer = hb_param( 2, HB_IT_STRING ); + ULONG ulRead, ulSize; + int iResult; + + if( pBuffer && ISBYREF( 2 ) ) + { + if( hUnzip ) + { + ulSize = hb_parclen( 2 ); + + if( ISNUM( 3 ) ) + { + ulRead = (ULONG) hb_parnl( 3 ); + if( ulRead < ulSize ) + ulSize = ulRead; + } + + pBuffer = hb_itemUnShareString( pBuffer ); + iResult = unzReadCurrentFile( hUnzip, hb_itemGetCPtr( pBuffer ), ulSize ); + hb_retnl( iResult ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +/* HB_UnzipFileClose( hUnzip ) --> nError */ +HB_FUNC( HB_UNZIPFILECLOSE ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + + if( hUnzip ) + hb_retni( unzCloseCurrentFile( hUnzip ) ); +} + + +/* +* +* Higher level functions - not a wrappers of minizip code +* +*/ + +static int hb_zipStoreFile( zipFile hZip, char* szFileName, char* szName ) +{ + char * szZipName, * pString; + FHANDLE hFile; + ULONG ulLen, ulExtAttr; + zip_fileinfo zfi; + int iResult; + BOOL fError; + + + if( szName ) + { + /* change path separators to '/' */ + szZipName = hb_strdup( szName ); + + ulLen = strlen( szZipName ); + pString = szZipName; + while( ulLen-- ) + { + if( pString[ ulLen ] == '\\' ) + pString[ ulLen ] = '/'; + } + } + else + { + /* get file name */ + szZipName = hb_strdup( szFileName ); + + ulLen = strlen( szZipName ); + pString = szZipName; + + while( ulLen-- ) + { + if( pString[ ulLen ] == '/' || pString[ ulLen ] == '\\' ) + { + memmove( szZipName, &pString[ ulLen + 1 ], strlen( szZipName ) - ulLen ); + break; + } + } + } + + memset( &zfi, 0, sizeof( zfi ) ); + fError = FALSE; + +#if defined( HB_OS_WIN_32 ) + { + ulExtAttr = GetFileAttributes( szFileName ); + + if( (LONG) ulExtAttr != -1 ) + { + ulExtAttr = GetFileAttributes( szFileName ) & + ( FILE_ATTRIBUTE_READONLY | FILE_ATTRIBUTE_HIDDEN | + FILE_ATTRIBUTE_SYSTEM | FILE_ATTRIBUTE_DIRECTORY | + FILE_ATTRIBUTE_ARCHIVE ); + + ulExtAttr |= 0x01B60000; /* rw-rw-rw- */ + + if( ulExtAttr & FILE_ATTRIBUTE_DIRECTORY ) + ulExtAttr |= 0x40000000; + else + ulExtAttr |= 0x80000000; + + ulLen = strlen( szZipName ); + if( ulLen > 4 ) + { + pString = &szZipName[ ulLen - 4 ]; + if( stricmp( pString, ".exe" ) == 0 || stricmp( pString, ".com" ) == 0 || + stricmp( pString, ".bat" ) == 0 ) + { + ulExtAttr |= 0x00490000; /* --x--x--x */ + } + } + } + else + fError = TRUE; + } +#elif defined( HB_OS_UNIX ) + { + struct stat statbuf; + struct tm st; + + if( stat( szFileName, &statbuf ) == 0 ) + { + if( S_ISDIR( statbuf.st_mode ) ) + { + ulExtAttr |= 0x40000000; + ulExtAttr |= 0x10; /* FILE_ATTRIBUTE_DIRECTORY */ + } + else + { + ulExtAttr |= 0x80000000; + ulExtAttr |= 0x20; /* FILE_ATTRIBUTE_ARCHIVE */ + } + + ulExtAttr |= ( statbuf.st_mode & S_IRWXO ) << 16; + ulExtAttr |= ( statbuf.st_mode & S_IRWXG ) << 15; + ulExtAttr |= ( statbuf.st_mode & S_IRWXU ) << 14; + + localtime_r( &statbuf.st_mtime, &st ); + + zfi.tmz_date.tm_sec = st.tm_sec; + zfi.tmz_date.tm_min = st.tm_min; + zfi.tmz_date.tm_hour = st.tm_hour; + zfi.tmz_date.tm_mday = st.tm_mday; + zfi.tmz_date.tm_mon = st.tm_mon - 1; + zfi.tmz_date.tm_year = st.tm_year; + } + else + fError = TRUE; + } +#else + { + int TODO; /* To force warning */ + + ulExtAttr = 0x81B60020; /* FILE_ATTRIBUTE_ARCHIVE | rw-rw-rw- */ + } +#endif + zfi.external_fa = ulExtAttr; + + /* TODO: zip.exe test: 0 for binary file, 1 for text. Does not depend on + extension. We should analyse content of file to determine this??? */ + zfi.internal_fa = 0; + + if( fError ) + { + hb_xfree( szZipName ); + return -200; + } + + if( ulExtAttr & 0x40000000 ) + { + iResult = zipOpenNewFileInZip( hZip, szZipName, &zfi, NULL, 0, NULL, 0, NULL, + Z_DEFLATED, Z_DEFAULT_COMPRESSION ); + if( iResult == 0 ) + zipCloseFileInZip( hZip ); + } + else + { + hFile = hb_fsOpen( szFileName, 0 ); + + if( hFile != FS_ERROR ) + { +#if defined( HB_OS_WIN_32 ) + { + FILETIME ftutc, ft; + SYSTEMTIME st; + + if( GetFileTime( LongToHandle( hFile ), NULL, NULL, &ftutc ) && + FileTimeToLocalFileTime( &ftutc, &ft ) & + FileTimeToSystemTime( &ft, &st ) ) + { + zfi.tmz_date.tm_sec = st.wSecond; + zfi.tmz_date.tm_min = st.wMinute; + zfi.tmz_date.tm_hour = st.wHour; + zfi.tmz_date.tm_mday = st.wDay; + zfi.tmz_date.tm_mon = st.wMonth - 1; + zfi.tmz_date.tm_year = st.wYear; + } + } +#endif + iResult = zipOpenNewFileInZip( hZip, szZipName, &zfi, NULL, 0, NULL, 0, NULL, + Z_DEFLATED, Z_DEFAULT_COMPRESSION ); + if( iResult == 0 ) + { + pString = (char*) hb_xgrab( 1024 * 16 ); + while ( ( ulLen = hb_fsReadLarge( hFile, pString, 1024 * 16 ) ) > 0 ) + { + zipWriteInFileInZip( hZip, pString, ulLen ); + } + hb_xfree( pString ); + + zipCloseFileInZip( hZip ); + } + hb_fsClose( hFile ); + } + else + { + iResult = -200 - hb_fsError(); + } + } + hb_xfree( szZipName ); + return iResult; +} + + +/* HB_ZipStoreFile( hZip, cFileName [, cZipName ] ) --> nError */ +HB_FUNC( HB_ZIPSTOREFILE ) +{ + char* szFileName = hb_parc( 2 ); + + if( szFileName ) + { + zipFile hZip = hb_zipfileParam( 1 ); + + if( hZip ) + hb_retni( hb_zipStoreFile( hZip, szFileName, hb_parc( 3 ) ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +static int hb_unzipExtractCurrentFile( unzFile hUnzip, char* szFileName ) +{ + char szName[ _POSIX_PATH_MAX + 1 ]; + ULONG ulPos, ulLen; + char cSep, * pString; + unz_file_info ufi; + int iResult; + FHANDLE hFile; + + iResult = unzGetCurrentFileInfo( hUnzip, &ufi, szName, _POSIX_PATH_MAX, + NULL, 0, NULL, 0 ); + if( iResult != 0 ) + return iResult; + + iResult = unzOpenCurrentFile( hUnzip ); + + if( iResult != 0 ) + return iResult; + + if( szFileName ) + { + hb_strncpy( szName, szFileName, sizeof( szName ) ); + } + + ulLen = strlen( szName ); + + /* Test shows that files in subfolders can be stored to zip file without + explicitly adding folder. So, let's create a requred path */ + + ulPos = 1; + while( ulPos < ulLen ) + { + cSep = szName[ ulPos ]; + + /* allow both path separators, ignore terminating path separator */ + if( cSep == '\\' || cSep == '/' && ulPos < ulLen - 1 ) + { + szName[ ulPos ] = '\0'; + hb_fsMkDir( szName ); + szName[ ulPos ] = cSep; + } + ulPos++; + } + + if( ufi.external_fa & 0x40000000 ) /* DIRECTORY */ + { + hb_fsMkDir( szName ); + iResult = 0; + } + else + { + hFile = hb_fsCreate( szName, 0 ); + + if( hFile != FS_ERROR ) + { + pString = (char*) hb_xgrab( 1024 * 16 ); + + while ( ( iResult = unzReadCurrentFile( hUnzip, pString, 16 * 1024 ) ) > 0 ) + { + hb_fsWriteLarge( hFile, pString, (ULONG) iResult ); + } + hb_xfree( pString ); + +#if defined( HB_OS_WIN_32 ) + { + FILETIME ftutc, ft; + SYSTEMTIME st; + + st.wSecond = ufi.tmu_date.tm_sec; + st.wMinute = ufi.tmu_date.tm_min; + st.wHour = ufi.tmu_date.tm_hour; + st.wDay = ufi.tmu_date.tm_mday; + st.wMonth = ufi.tmu_date.tm_mon + 1; + st.wYear = ufi.tmu_date.tm_year; + st.wMilliseconds = 0; + + if( SystemTimeToFileTime( &st, &ft ) && + LocalFileTimeToFileTime( &ft, &ftutc ) ) + { + SetFileTime( LongToHandle( hFile ), &ftutc, &ftutc, &ftutc ); + } + } +#endif + + hb_fsClose( hFile ); + } + else + { + iResult = -200 - hb_fsError(); + } + } + unzCloseCurrentFile( hUnzip ); + + +#if defined( HB_OS_WIN_32 ) + { + SetFileAttributes( szName, ufi.external_fa & 0xFF ); + } +#elif defined( HB_OS_UNIX ) + { + struct utimebuf utim; + struct tm st; + time_t tim; + + chmod( szName, ( ufi.external_fa & 0x00070000 ) >> 16 | + ( ufi.external_fa & 0x00380000 ) >> 15 | + ( ufi.external_fa & 0x01C00000 ) >> 13 ); + + st.tm_sec = ufi.tmu_date.tm_sec; + st.tm_min = ufi.tmu_date.tm_min; + st.tm_hour = ufi.tmu_date.tm_hour; + st.tm_mday = ufi.tmu_date.tm_mday; + st.tm_mon = ufi.tmz_date.tm_mon + 1; + st.tm_year = ufi.tmu_date.tm_year; + + utim.actime = mktime( &st ); + utim.modtime = utim.actime; + + utime( szFile, &utm ); + } +#else + { + int TODO; /* To force warning */ + } +#endif + + return iResult; +} + + +/* HB_UnzipExtractCurrentFile( hZip [, cFileName ] ) --> nError */ +HB_FUNC( HB_UNZIPEXTRACTCURRENTFILE ) +{ + unzFile hUnzip = hb_unzipfileParam( 1 ); + + if( hUnzip ) + hb_retni( hb_unzipExtractCurrentFile( hUnzip, hb_parc( 2 ) ) ); +} + diff --git a/harbour/contrib/hbzlib/hbzlib.c b/harbour/contrib/hbzlib/hbzlib.c new file mode 100644 index 0000000000..f157a3ec67 --- /dev/null +++ b/harbour/contrib/hbzlib/hbzlib.c @@ -0,0 +1,520 @@ +/* + * $Id$ + */ + +/* + * Harbour Project source code: + * ZLIB functions wrapper + * + * Copyright 2007 Przemyslaw Czerpak + * www - http://www.harbour-project.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA (or visit the web site http://www.gnu.org/). + * + * As a special exception, the Harbour Project gives permission for + * additional uses of the text contained in its release of Harbour. + * + * The exception is that, if you link the Harbour libraries with other + * files to produce an executable, this does not by itself cause the + * resulting executable to be covered by the GNU General Public License. + * Your use of that executable is in no way restricted on account of + * linking the Harbour library code into it. + * + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + * + * This exception applies only to the code released by the Harbour + * Project under the name Harbour. If you copy code from other + * Harbour Project or Free Software Foundation releases into a copy of + * Harbour, as the General Public License permits, the exception does + * not apply to the code that you add in this way. To avoid misleading + * anyone as to the status of such modified files, you must delete + * this exception notice from them. + * + * If you write modifications of your own for Harbour, it is your choice + * whether to permit this exception to apply to your modifications. + * If you do not wish that, delete this exception notice. + * + */ + +#include "hbapi.h" +#include "hbapiitm.h" +#include "hbapierr.h" +#include "zlib.h" + +/* + * HB_ZLIBVERSION( [] ) -> + */ +HB_FUNC( HB_ZLIBVERSION ) +{ + if( hb_parni( 1 ) == 1 ) + hb_retc( ZLIB_VERSION ); + else + hb_retc( zlibVersion() ); +} + +/* + * HB_COMPARESBOUND( | ) -> + */ +HB_FUNC( HB_COMPRESSBOUND ) +{ + if( ISCHAR( 1 ) ) + hb_retnint( compressBound( hb_parclen( 1 ) ) ); + else if( ISNUM( 1 ) ) + hb_retnint( compressBound( hb_parnint( 1 ) ) ); + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_COMPARESS( , [|<@cBuffer>], [<@nResult>], [] ) + * => or NIL on Error + */ +HB_FUNC( HB_COMPRESS ) +{ + char * szData = hb_parc( 1 ); + if( szData ) + { + ULONG ulLen = hb_parclen( 1 ); + + if( ulLen ) + { + PHB_ITEM pBuffer = ISBYREF( 2 ) ? hb_param( 2, HB_IT_STRING ) : NULL; + uLong ulDstLen; + char * pDest; + int iResult; + + if( pBuffer ) + { + pBuffer = hb_itemUnShareString( pBuffer ); + ulDstLen = hb_itemGetCLen( pBuffer ); + pDest = hb_itemGetCPtr( pBuffer ); + } + else + { + ulDstLen = ISNUM( 2 ) ? hb_parnint( 2 ) : compressBound( ulLen ); + pDest = ( char * ) hb_xgrab( ulDstLen + 1 ); + } + + if( ISNUM( 4 ) ) + iResult = compress2( ( Bytef * ) pDest, &ulDstLen, szData, ulLen, hb_parni( 4 ) ); + else + iResult = compress( ( Bytef * ) pDest, &ulDstLen, szData, ulLen ); + hb_storni( iResult, 3 ); + + if( !pBuffer ) + { + if( iResult == Z_OK ) + hb_retclen_buffer( pDest, ulDstLen ); + else + hb_xfree( pDest ); + } + else if( iResult == Z_OK ) + hb_retclen( pDest, ulDstLen ); + } + else + { + hb_retc( NULL ); + hb_storni( Z_OK, 3 ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_UNCOMPARESS( , |<@cBuffer>, [<@nResult>] ) + * => or NIL on Error + */ +HB_FUNC( HB_UNCOMPRESS ) +{ + PHB_ITEM pBuffer = ISBYREF( 4 ) ? hb_param( 4, HB_IT_STRING ) : NULL; + char * szData = hb_parc( 1 ); + + if( szData && ( pBuffer || ISNUM( 2 ) ) ) + { + ULONG ulLen = hb_parclen( 1 ); + + if( ulLen ) + { + uLong ulDstLen; + char * pDest; + int iResult; + + if( pBuffer ) + { + pBuffer = hb_itemUnShareString( pBuffer ); + ulDstLen = hb_itemGetCLen( pBuffer ); + pDest = hb_itemGetCPtr( pBuffer ); + } + else + { + ulDstLen = hb_parnint( 2 ); + pDest = ( char * ) hb_xgrab( ulDstLen + 1 ); + } + + iResult = uncompress( ( Bytef * ) pDest, &ulDstLen, szData, ulLen ); + hb_storni( iResult, 3 ); + + if( !pBuffer ) + { + if( iResult == Z_OK ) + hb_retclen_buffer( pDest, ulDstLen ); + else + hb_xfree( pDest ); + } + else if( iResult == Z_OK ) + hb_retclen( pDest, ulDstLen ); + } + else + { + hb_retc( NULL ); + hb_storni( Z_OK, 3 ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + + +static ULONG hb_zlibUncompressedSize( const char * szSrc, ULONG ulLen ) +{ + Byte buffer[ 1024 ]; + z_stream stream; + ULONG ulDest = 0; + + memset( &stream, 0, sizeof( z_stream ) ); + stream.next_in = ( Bytef * ) szSrc; + stream.avail_in = ( uInt ) ulLen; + if( inflateInit( &stream ) == Z_OK ) + { + int iStatus; + do + { + stream.next_out = buffer; + stream.avail_out = sizeof( buffer ); + iStatus = inflate( &stream, Z_NO_FLUSH ); + } + while( iStatus == Z_OK ); + if( iStatus == Z_STREAM_END ) + ulDest = stream.total_out; + inflateEnd( &stream ); + } + return ulDest; +} + + +/* + * HB_UNCOMPRESSLEN( ) -> or 0 on error + */ +HB_FUNC( HB_UNCOMPRESSLEN ) +{ + ULONG ulLen = hb_parclen( 1 ); + + hb_retnint( ulLen ? hb_zlibUncompressedSize( hb_parc( 1 ), ulLen ) : 0 ); +} + + +/* GZIP stream destructor */ +static HB_GARBAGE_FUNC( hb_gz_Destructor ) +{ + gzFile * gz = ( gzFile * ) Cargo; + if( * gz ) + { + gzclose( * gz ); + * gz = NULL; + } +} + +static gzFile hb_gzParam( int iParam ) +{ + gzFile * gzHolder = hb_parptrGC( hb_gz_Destructor, iParam ); + + if( gzHolder && * gzHolder ) + return * gzHolder; + + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); + return NULL; +} + +/* + * HB_GZOPEN( , ) => or NIL on Error + */ +HB_FUNC( HB_GZOPEN ) +{ + char * cFile = hb_parc( 1 ), * cMode = hb_parc( 2 ); + if( cFile && cMode ) + { + gzFile gz = gzopen( cFile, cMode ); + if( gz ) + { + gzFile * gzHolder = ( gzFile * ) hb_gcAlloc( sizeof( gzFile ), + hb_gz_Destructor ); + * gzHolder = gz; + hb_retptrGC( gzHolder ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZDOPEN( , ) => or NIL on Error + */ +HB_FUNC( HB_GZDOPEN ) +{ + char * cMode = hb_parc( 2 ); + if( ISNUM( 1 ) && cMode ) + { + gzFile gz = gzdopen( hb_parni( 1 ), cMode ); + if( gz ) + { + gzFile * gzHolder = ( gzFile * ) hb_gcAlloc( sizeof( gzFile ), + hb_gz_Destructor ); + * gzHolder = gz; + hb_retptrGC( gzHolder ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZCLOSE( ) => + */ +HB_FUNC( HB_GZCLOSE ) +{ + gzFile * gzHolder = hb_parptrGC( hb_gz_Destructor, 1 ); + + if( gzHolder ) + { + gzFile gz = * gzHolder; + * gzHolder = NULL; + hb_retni( gzclose( gz ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZSETPARAMS( , , ) => + */ +HB_FUNC( HB_GZSETPARAMS ) +{ + if( ISNUM( 2 ) && ISNUM( 3 ) ) + { + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retni( gzsetparams( gz, hb_parni( 2 ), hb_parni( 3 ) ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZREAD( , <@cData>, [ ] ) => + */ +HB_FUNC( HB_GZREAD ) +{ + PHB_ITEM pBuffer = ISBYREF( 2 ) ? hb_param( 2, HB_IT_STRING ) : NULL; + + if( pBuffer ) + { + gzFile gz = hb_gzParam( 1 ); + if( gz ) + { + pBuffer = hb_itemUnShareString( pBuffer ); + hb_retni( gzread( gz, hb_itemGetCPtr( pBuffer ), ISNUM( 3 ) ? + ( ULONG ) hb_parnl( 3 ) : hb_itemGetCLen( pBuffer ) ) ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZWRITE( , , [ ] ) => + */ +HB_FUNC( HB_GZWRITE ) +{ + char * szData = hb_parc( 2 ); + if( szData ) + { + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retni( gzwrite( gz, szData, ISNUM( 3 ) ? + ( ULONG ) hb_parnl( 3 ) : hb_parclen( 2 ) ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZGETS( , ) => or NIL on error + */ +HB_FUNC( HB_GZGETS ) +{ + int iLen = hb_parni( 2 ); + if( iLen > 0 ) + { + gzFile gz = hb_gzParam( 1 ); + if( gz ) + { + char * szBuffer = ( char * ) hb_xgrab( iLen + 1 ); + + if( gzgets( gz, szBuffer, iLen ) != Z_NULL ) + hb_retc_buffer( szBuffer ); + else + hb_xfree( szBuffer ); + } + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZPUTS( , ) => + */ +HB_FUNC( HB_GZPUTS ) +{ + char * szData = hb_parc( 2 ); + if( szData ) + { + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retni( gzputs( gz, szData ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZGETC( ) => + */ +HB_FUNC( HB_GZGETC ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retni( gzgetc( gz ) ); +} + +/* + * HB_GZUNGETC( , ) => + */ +HB_FUNC( HB_GZUNGETC ) +{ + if( ISNUM( 1 ) ) + { + gzFile gz = hb_gzParam( 2 ); + if( gz ) + hb_retni( gzungetc( hb_parni( 1 ), gz ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZFLUSH( , [ ] ) => + */ +HB_FUNC( HB_GZFLUSH ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retni( gzflush( gz, ISNUM( 2 ) ? hb_parni( 2 ) : Z_SYNC_FLUSH ) ); +} + +/* + * HB_GZSEEK( , , [ ] ) => + */ +HB_FUNC( HB_GZSEEK ) +{ + if( ISNUM( 2 ) ) + { + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retnint( gzseek( gz, hb_parnint( 2 ), ISNUM( 3 ) ? + hb_parni( 3 ) : SEEK_SET ) ); + } + else + hb_errRT_BASE_SubstR( EG_ARG, 3012, NULL, &hb_errFuncName, HB_ERR_ARGS_BASEPARAMS ); +} + +/* + * HB_GZREWIND( ) => + */ +HB_FUNC( HB_GZREWIND ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retni( gzrewind( gz ) ); +} + +/* + * HB_GZTELL( ) => + */ +HB_FUNC( HB_GZTELL ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retnint( gztell( gz ) ); +} + +/* + * HB_GZEOF( ) => + */ +HB_FUNC( HB_GZEOF ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retl( gzeof( gz ) != 0 ); +} + +#if ZLIB_VERNUM >= 0x1230 +/* + * HB_GZDIRECT( ) => + */ +HB_FUNC( HB_GZDIRECT ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + hb_retl( gzdirect( gz ) != 0 ); +} +#endif + +/* + * HB_GZERROR( , [ <@nError> ] ) => + */ +HB_FUNC( HB_GZERROR ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + { + int iErrNum = 0; + + hb_retc( gzerror( gz, &iErrNum ) ); + hb_storni( iErrNum, 2 ); + } +} + +/* + * HB_GZCLEARERR( ) => NIL + */ +HB_FUNC( HB_GZCLEARERR ) +{ + gzFile gz = hb_gzParam( 1 ); + if( gz ) + gzclearerr( gz ); +} diff --git a/harbour/contrib/hbzlib/hbzlib.ch b/harbour/contrib/hbzlib/hbzlib.ch new file mode 100644 index 0000000000..62f32d731e --- /dev/null +++ b/harbour/contrib/hbzlib/hbzlib.ch @@ -0,0 +1,70 @@ +/* + * $Id$ + */ + +/* + * Harbour Project source code: + * ZLIB and ZIP header file + * + * Copyright 2008 Mindaugas Kavaliauskas + * www - http://www.harbour-project.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA (or visit the web site http://www.gnu.org/). + * + * As a special exception, the Harbour Project gives permission for + * additional uses of the text contained in its release of Harbour. + * + * The exception is that, if you link the Harbour libraries with other + * files to produce an executable, this does not by itself cause the + * resulting executable to be covered by the GNU General Public License. + * Your use of that executable is in no way restricted on account of + * linking the Harbour library code into it. + * + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + * + * This exception applies only to the code released by the Harbour + * Project under the name Harbour. If you copy code from other + * Harbour Project or Free Software Foundation releases into a copy of + * Harbour, as the General Public License permits, the exception does + * not apply to the code that you add in this way. To avoid misleading + * anyone as to the status of such modified files, you must delete + * this exception notice from them. + * + * If you write modifications of your own for Harbour, it is your choice + * whether to permit this exception to apply to your modifications. + * If you do not wish that, delete this exception notice. + * + */ + + +#ifndef HB_ZLIB_CH_ +#define HB_ZLIB_CH_ + +#define HB_ZLIB_METHOD_STORE 0 +#define HB_ZLIB_METHOD_DEFLATED 8 + +#define HB_ZLIB_COMPRESSION_NONE 0 +#define HB_ZLIB_COMPRESSION_SPEED 1 +#define HB_ZLIB_COMPRESSION_SIZE 9 +#define HB_ZLIB_COMPRESSION_DEFAULT (-1) + +#define HB_ZIP_OPEN_CREATE 0 +#define HB_ZIP_OPEN_CREATEAFTER 1 +#define HB_ZIP_OPEN_ADDINZIP 2 + +#endif + diff --git a/harbour/contrib/hbzlib/ioapi.c b/harbour/contrib/hbzlib/ioapi.c new file mode 100644 index 0000000000..623757a94a --- /dev/null +++ b/harbour/contrib/hbzlib/ioapi.c @@ -0,0 +1,198 @@ +/* ioapi.c -- IO base function header for compress/uncompress .zip + files using zlib + zip or unzip API + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant +*/ + +#include +#include +#include + +#include "zlib.h" +#include "ioapi.h" + + + +/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */ + +#ifndef SEEK_CUR +#define SEEK_CUR 1 +#endif + +#ifndef SEEK_END +#define SEEK_END 2 +#endif + +#ifndef SEEK_SET +#define SEEK_SET 0 +#endif + +voidpf ZCALLBACK fopen_file_func OF(( + voidpf opaque, + const char* filename, + int mode)); + +uLong ZCALLBACK fread_file_func OF(( + voidpf opaque, + voidpf stream, + void* buf, + uLong size)); + +uLong ZCALLBACK fwrite_file_func OF(( + voidpf opaque, + voidpf stream, + const void* buf, + uLong size)); + +long ZCALLBACK ftell_file_func OF(( + voidpf opaque, + voidpf stream)); + +long ZCALLBACK fseek_file_func OF(( + voidpf opaque, + voidpf stream, + uLong offset, + int origin)); + +int ZCALLBACK fclose_file_func OF(( + voidpf opaque, + voidpf stream)); + +int ZCALLBACK ferror_file_func OF(( + voidpf opaque, + voidpf stream)); + + +voidpf ZCALLBACK fopen_file_func (opaque, filename, mode) + voidpf opaque; + const char* filename; + int mode; +{ + FILE* file = NULL; + const char* mode_fopen = NULL; + + (void) opaque; + + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + mode_fopen = "rb"; + else + if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + mode_fopen = "r+b"; + else + if (mode & ZLIB_FILEFUNC_MODE_CREATE) + mode_fopen = "wb"; + + if ((filename!=NULL) && (mode_fopen != NULL)) + file = fopen(filename, mode_fopen); + return file; +} + + +uLong ZCALLBACK fread_file_func (opaque, stream, buf, size) + voidpf opaque; + voidpf stream; + void* buf; + uLong size; +{ + uLong ret; + + (void) opaque; + + ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + + +uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size) + voidpf opaque; + voidpf stream; + const void* buf; + uLong size; +{ + uLong ret; + + (void) opaque; + + ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + +long ZCALLBACK ftell_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + long ret; + + (void) opaque; + + ret = ftell((FILE *)stream); + return ret; +} + +long ZCALLBACK fseek_file_func (opaque, stream, offset, origin) + voidpf opaque; + voidpf stream; + uLong offset; + int origin; +{ + int fseek_origin; + long ret; + + (void) opaque; + + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + fseek_origin = SEEK_CUR; + break; + case ZLIB_FILEFUNC_SEEK_END : + fseek_origin = SEEK_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + fseek_origin = SEEK_SET; + break; + default: return -1; + } + ret = 0; + fseek((FILE *)stream, offset, fseek_origin); + return ret; +} + +int ZCALLBACK fclose_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + int ret; + + (void) opaque; + + ret = fclose((FILE *)stream); + return ret; +} + +int ZCALLBACK ferror_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + int ret; + + (void) opaque; + + ret = ferror((FILE *)stream); + return ret; +} + +void fill_fopen_filefunc (pzlib_filefunc_def) + zlib_filefunc_def* pzlib_filefunc_def; +{ + pzlib_filefunc_def->zopen_file = fopen_file_func; + pzlib_filefunc_def->zread_file = fread_file_func; + pzlib_filefunc_def->zwrite_file = fwrite_file_func; + pzlib_filefunc_def->ztell_file = ftell_file_func; + pzlib_filefunc_def->zseek_file = fseek_file_func; + pzlib_filefunc_def->zclose_file = fclose_file_func; + pzlib_filefunc_def->zerror_file = ferror_file_func; + pzlib_filefunc_def->opaque = NULL; +} diff --git a/harbour/contrib/hbzlib/ioapi.h b/harbour/contrib/hbzlib/ioapi.h new file mode 100644 index 0000000000..7d457baab3 --- /dev/null +++ b/harbour/contrib/hbzlib/ioapi.h @@ -0,0 +1,75 @@ +/* ioapi.h -- IO base function header for compress/uncompress .zip + files using zlib + zip or unzip API + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant +*/ + +#ifndef _ZLIBIOAPI_H +#define _ZLIBIOAPI_H + + +#define ZLIB_FILEFUNC_SEEK_CUR (1) +#define ZLIB_FILEFUNC_SEEK_END (2) +#define ZLIB_FILEFUNC_SEEK_SET (0) + +#define ZLIB_FILEFUNC_MODE_READ (1) +#define ZLIB_FILEFUNC_MODE_WRITE (2) +#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3) + +#define ZLIB_FILEFUNC_MODE_EXISTING (4) +#define ZLIB_FILEFUNC_MODE_CREATE (8) + + +#ifndef ZCALLBACK + +#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK) +#define ZCALLBACK CALLBACK +#else +#define ZCALLBACK +#endif +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode)); +typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size)); +typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream)); +typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin)); +typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream)); +typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream)); + +typedef struct zlib_filefunc_def_s +{ + open_file_func zopen_file; + read_file_func zread_file; + write_file_func zwrite_file; + tell_file_func ztell_file; + seek_file_func zseek_file; + close_file_func zclose_file; + testerror_file_func zerror_file; + voidpf opaque; +} zlib_filefunc_def; + + + +void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); + +#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size)) +#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size)) +#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream)) +#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode)) +#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream)) +#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream)) + + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/harbour/contrib/hbzlib/make_b32.bat b/harbour/contrib/hbzlib/make_b32.bat new file mode 100644 index 0000000000..4d797825f5 --- /dev/null +++ b/harbour/contrib/hbzlib/make_b32.bat @@ -0,0 +1,6 @@ +@echo off +rem +rem $Id$ +rem + +call ..\mtpl_b32.bat %1 %2 %3 %4 %5 %6 %7 %8 %9 diff --git a/harbour/contrib/hbzlib/make_vc.bat b/harbour/contrib/hbzlib/make_vc.bat new file mode 100644 index 0000000000..d9e427d835 --- /dev/null +++ b/harbour/contrib/hbzlib/make_vc.bat @@ -0,0 +1,6 @@ +@echo off +rem +rem $Id$ +rem + +call ..\mtpl_vc.bat %1 %2 %3 %4 %5 %6 %7 %8 %9 diff --git a/harbour/contrib/hbzlib/readme.txt b/harbour/contrib/hbzlib/readme.txt new file mode 100644 index 0000000000..8d09e3f054 --- /dev/null +++ b/harbour/contrib/hbzlib/readme.txt @@ -0,0 +1,50 @@ +/* + * $Id$ + */ + + +This folder contains compression related files including: + * zlib library (http://www.zlib.net/) wrapper functions + * zip file support based on minizip library (http://www.winimage.com/zLibDll/minizip.html) + including: + * minizip version 1.01e source files + * wrapper functions for minizip + * some additionl functions to provide a higher level API for zip files + +The sources of zlib itself is not included. You'll find it in the system under linux. +For windows, please, download dll file containig compiled zlib library and make import +library for the compiler you are using. If you want a static library try to locate it on +the net, ex., you can find it for several compiler on http://libharu.sourceforge.net/ + + +Some small changes (to fix compile time warning and errors) are applied to original +source of minizip 1.01e: + * harbour/contrib/hbzlib/zconf.h + * changed #if 1 to #if 0 to not include unistd.h + + * harbour/contrib/hbzlib/zip.c + * added forward definitions of allocate_new_datablock(), + free_datablock(), init_linkedlist(), add_data_in_datablock(), + ziplocal_TmzDateToDosDate() + * pacified warnings of unused args dosDate and crcForCrypting + * fixed 2 warnings: assigned value is not used. See, TOFIX + comment for one of the fixes + * fixed BCC warning "function call with no prototype" by changing + local int zipFlushWriteBuffer(zi) + zip_internal* zi; + { + to + local int zipFlushWriteBuffer(zip_internal* zi) + { + I expected this code be equivavlent! ??? :/ + + * harbour/contrib/hbzlib/unzip.c + * added forward definitions of strcmpcasenosensitive_internal(), + unzlocal_DosDateToTmuDate(), unzlocal_CheckCurrentFileCoherencyHeader() + * fixed 8 warnings: assigned value is not used. See, TOFIX + comment for one of the fixes + + * harbour/contrib/hbzlib/ioapi.c + * pacified 7 warnings: unused args opaque + * fixed warning: assigned value is not used + diff --git a/harbour/contrib/hbzlib/tests/myunzip.prg b/harbour/contrib/hbzlib/tests/myunzip.prg new file mode 100644 index 0000000000..fbf2cf55a0 --- /dev/null +++ b/harbour/contrib/hbzlib/tests/myunzip.prg @@ -0,0 +1,96 @@ +/* + * $Id$ + */ + +/* + * Harbour Project source code: + * MyUnzip utility + * + * Copyright 2008 Mindaugas Kavaliauskas + * www - http://www.harbour-project.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA (or visit the web site http://www.gnu.org/). + * + * As a special exception, the Harbour Project gives permission for + * additional uses of the text contained in its release of Harbour. + * + * The exception is that, if you link the Harbour libraries with other + * files to produce an executable, this does not by itself cause the + * resulting executable to be covered by the GNU General Public License. + * Your use of that executable is in no way restricted on account of + * linking the Harbour library code into it. + * + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + * + * This exception applies only to the code released by the Harbour + * Project under the name Harbour. If you copy code from other + * Harbour Project or Free Software Foundation releases into a copy of + * Harbour, as the General Public License permits, the exception does + * not apply to the code that you add in this way. To avoid misleading + * anyone as to the status of such modified files, you must delete + * this exception notice from them. + * + * If you write modifications of your own for Harbour, it is your choice + * whether to permit this exception to apply to your modifications. + * If you do not wish that, delete this exception notice. + * + */ + + + +PROC MyUnzip( ... ) + LOCAL hUnzip, aWild, cFileName, cWild, cFile, dDate, cTime, nSize, nCompSize, nErr + + aWild := { ... } + IF LEN( aWild ) < 1 + ? "Usage: myunzip [ ... ]" + RETURN + ENDIF + + cFileName := aWild[ 1 ] + IF ! ( "." $ cFileName ) + cFileName += ".zip" + ENDIF + + ADEL( aWild, 1 ) + ASIZE( aWild, LEN( aWild ) - 1 ) + AEVAL( aWild, {|cPattern, nPos| aWild[ nPos ] := STRTRAN( cPattern, "\", "/" ) } ) + + hUnzip := HB_UNZIPOPEN( cFileName ) + + IF ! EMPTY( hUnzip ) + ? "Archive file:", cFileName + ? "" + ? "Filename Date Time Size Compressed Action" + ? "---------------------------------------------------------------------------------" + nErr := HB_UNZIPFILEFIRST( hUnzip ) + DO WHILE nErr == 0 + HB_UnzipFileInfo( hUnzip, @cFile, @dDate, @cTime,,,, @nSize, @nCompSize ) + ? PADR( cFile, 30 ), dDate, cTime, nSize, nCompSize + + IF ASCAN( aWild, {|cPattern| HB_WILDMATCH( cPattern, cFile, .T. ) } ) > 0 + ?? " Extracting" + HB_UnzipExtractCurrentFile( hUnzip ) + ELSE + ?? " Skipping" + ENDIF + + nErr := HB_UNZIPFILENEXT( hUnzip ) + ENDDO + HB_UNZIPCLOSE( hUnzip ) + ENDIF +RETURN 0 diff --git a/harbour/contrib/hbzlib/tests/myzip.prg b/harbour/contrib/hbzlib/tests/myzip.prg new file mode 100644 index 0000000000..838ca7556e --- /dev/null +++ b/harbour/contrib/hbzlib/tests/myzip.prg @@ -0,0 +1,87 @@ +/* + * $Id$ + */ + +/* + * Harbour Project source code: + * MyZip utility + * + * Copyright 2008 Mindaugas Kavaliauskas + * www - http://www.harbour-project.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA (or visit the web site http://www.gnu.org/). + * + * As a special exception, the Harbour Project gives permission for + * additional uses of the text contained in its release of Harbour. + * + * The exception is that, if you link the Harbour libraries with other + * files to produce an executable, this does not by itself cause the + * resulting executable to be covered by the GNU General Public License. + * Your use of that executable is in no way restricted on account of + * linking the Harbour library code into it. + * + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + * + * This exception applies only to the code released by the Harbour + * Project under the name Harbour. If you copy code from other + * Harbour Project or Free Software Foundation releases into a copy of + * Harbour, as the General Public License permits, the exception does + * not apply to the code that you add in this way. To avoid misleading + * anyone as to the status of such modified files, you must delete + * this exception notice from them. + * + * If you write modifications of your own for Harbour, it is your choice + * whether to permit this exception to apply to your modifications. + * If you do not wish that, delete this exception notice. + * + */ + + + +PROC MyZip( ... ) + LOCAL hZip, aDir, aFile, aWild, cFileName, cPath, cWild + + aWild := { ... } + IF LEN(aWild) < 2 + ? "Usage: myzip [ ... ]" + RETURN + ENDIF + + cFileName := aWild[ 1 ] + IF ! ( "." $ cFileName ) + cFileName += ".zip" + ENDIF + + ADEL( aWild, 1 ) + ASIZE( aWild, LEN( aWild ) - 1 ) + + hZip := HB_ZIPOPEN( cFileName ) + IF ! EMPTY( hZip ) + ? "Archive file:", cFileName + FOR EACH cWild IN aWild + aDir := DIRECTORY( cWild ) + cPath = LEFT( cWild, RAT( HB_OSPATHSEPARATOR(), cWild ) ) + FOR EACH aFile IN aDir + IF cPath + aFile[ 1 ] != cFileName + ? "Adding", cPath + aFile[ 1 ] + HB_ZipStoreFile( hZip, cPath + aFile[ 1 ], cPath + aFile[ 1 ] ) + ENDIF + NEXT + NEXT + HB_ZIPCLOSE( hZip ) + ENDIF +RETURN 0 diff --git a/harbour/contrib/hbzlib/unzip.c b/harbour/contrib/hbzlib/unzip.c new file mode 100644 index 0000000000..d238f24b17 --- /dev/null +++ b/harbour/contrib/hbzlib/unzip.c @@ -0,0 +1,1599 @@ +/* unzip.c -- IO for uncompress .zip files using zlib + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + Read unzip.h for more info +*/ + +/* Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of +compatibility with older software. The following is from the original crypt.c. Code +woven in by Terry Thorsen 1/2003. +*/ +/* + Copyright (c) 1990-2000 Info-ZIP. All rights reserved. + + See the accompanying file LICENSE, version 2000-Apr-09 or later + (the contents of which are also included in zip.h) for terms of use. + If, for some reason, all these files are missing, the Info-ZIP license + also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html +*/ +/* + crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h] + + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + */ + +/* + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). + */ + + +#include +#include +#include +#include "zlib.h" +#include "unzip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + + +#ifndef CASESENSITIVITYDEFAULT_NO +# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) +# define CASESENSITIVITYDEFAULT_NO +# endif +#endif + + +#ifndef UNZ_BUFSIZE +#define UNZ_BUFSIZE (16384) +#endif + +#ifndef UNZ_MAXFILENAMEINZIP +#define UNZ_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) + + + + +const char unz_copyright[] = + " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + +/* unz_file_info_interntal contain internal info about a file in zipfile*/ +typedef struct unz_file_info_internal_s +{ + uLong offset_curfile;/* relative offset of local header 4 bytes */ +} unz_file_info_internal; + + +/* file_in_zip_read_info_s contain internal information about a file in zipfile, + when reading and decompress it */ +typedef struct +{ + char *read_buffer; /* internal buffer for compressed data */ + z_stream stream; /* zLib stream structure for inflate */ + + uLong pos_in_zipfile; /* position in byte on the zipfile, for fseek*/ + uLong stream_initialised; /* flag set if stream structure is initialised*/ + + uLong offset_local_extrafield;/* offset of the local extra field */ + uInt size_local_extrafield;/* size of the local extra field */ + uLong pos_local_extrafield; /* position in the local extra field in read*/ + + uLong crc32; /* crc32 of all data uncompressed */ + uLong crc32_wait; /* crc32 we must obtain after decompress all */ + uLong rest_read_compressed; /* number of byte to be decompressed */ + uLong rest_read_uncompressed;/*number of byte to be obtained after decomp*/ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + uLong compression_method; /* compression method (0==store) */ + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + int raw; +} file_in_zip_read_info_s; + + +/* unz_s contain internal information about the zipfile +*/ +typedef struct +{ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + unz_global_info gi; /* public global information */ + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + uLong num_file; /* number of the current file in the zipfile*/ + uLong pos_in_central_dir; /* pos of the current file in the central dir*/ + uLong current_file_ok; /* flag about the usability of the current file*/ + uLong central_pos; /* position of the beginning of the central dir*/ + + uLong size_central_dir; /* size of the central directory */ + uLong offset_central_dir; /* offset of start of central directory with + respect to the starting disk number */ + + unz_file_info cur_file_info; /* public info about the current file in zip*/ + unz_file_info_internal cur_file_info_internal; /* private info about it*/ + file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current + file if we are decompressing it */ + int encrypted; +# ifndef NOUNCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const unsigned long* pcrc_32_tab; +# endif +} unz_s; + + +#ifndef NOUNCRYPT +#include "crypt.h" +#endif + +/* Forward definitions */ +local int strcmpcasenosensitive_internal(const char* fileName1, const char* fileName2); +local void unzlocal_DosDateToTmuDate(uLong ulDosDate, tm_unz* ptm); +local int unzlocal_CheckCurrentFileCoherencyHeader(unz_s* s, uInt* piSizeVar, uLong *poffset_local_extrafield, uInt *psize_local_extrafield); + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ + + +local int unzlocal_getByte OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + int *pi)); + +local int unzlocal_getByte(pzlib_filefunc_def,filestream,pi) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + int *pi; +{ + unsigned char c; + int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return UNZ_OK; + } + else + { + if (ZERROR(*pzlib_filefunc_def,filestream)) + return UNZ_ERRNO; + else + return UNZ_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int unzlocal_getShort OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unzlocal_getShort (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int unzlocal_getLong OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unzlocal_getLong (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<16; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + + +/* My own strcmpi / strcasecmp */ +local int strcmpcasenosensitive_internal (fileName1,fileName2) + const char* fileName1; + const char* fileName2; +{ + for (;;) + { + char c1=*(fileName1++); + char c2=*(fileName2++); + if ((c1>='a') && (c1<='z')) + c1 -= 0x20; + if ((c2>='a') && (c2<='z')) + c2 -= 0x20; + if (c1=='\0') + return ((c2=='\0') ? 0 : -1); + if (c2=='\0') + return 1; + if (c1c2) + return 1; + } +} + + +#ifdef CASESENSITIVITYDEFAULT_NO +#define CASESENSITIVITYDEFAULTVALUE 2 +#else +#define CASESENSITIVITYDEFAULTVALUE 1 +#endif + +#ifndef STRCMPCASENOSENTIVEFUNCTION +#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal +#endif + +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) + +*/ +extern int ZEXPORT unzStringFileNameCompare (fileName1,fileName2,iCaseSensitivity) + const char* fileName1; + const char* fileName2; + int iCaseSensitivity; +{ + if (iCaseSensitivity==0) + iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; + + if (iCaseSensitivity==1) + return strcmp(fileName1,fileName2); + + return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif + +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local uLong unzlocal_SearchCentralDir OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream)); + +local uLong unzlocal_SearchCentralDir(pzlib_filefunc_def,filestream) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; +{ + unsigned char* buf; + uLong uSizeFile; + uLong uBackRead; + uLong uMaxBack=0xffff; /* maximum size of global comment */ + uLong uPosFound=0; + + if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); + if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} + +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer + "zlib/zlib114.zip". + If the zipfile cannot be opened (file doesn't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ +extern unzFile ZEXPORT unzOpen2 (path, pzlib_filefunc_def) + const char *path; + zlib_filefunc_def* pzlib_filefunc_def; +{ + unz_s us; + unz_s *s; + uLong central_pos,uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + uLong number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + + int err=UNZ_OK; + + if (unz_copyright[0]!=' ') + return NULL; + + if (pzlib_filefunc_def==NULL) + fill_fopen_filefunc(&us.z_filefunc); + else + us.z_filefunc = *pzlib_filefunc_def; + + us.filestream= (*(us.z_filefunc.zopen_file))(us.z_filefunc.opaque, + path, + ZLIB_FILEFUNC_MODE_READ | + ZLIB_FILEFUNC_MODE_EXISTING); + if (us.filestream==NULL) + return NULL; + + central_pos = unzlocal_SearchCentralDir(&us.z_filefunc,us.filestream); + if (central_pos==0) + err=UNZ_ERRNO; + + if (ZSEEK(us.z_filefunc, us.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* zipfile comment length */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((central_pospfile_in_zip_read!=NULL) + unzCloseCurrentFile(file); + + ZCLOSE(s->z_filefunc, s->filestream); + TRYFREE(s); + return UNZ_OK; +} + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ +extern int ZEXPORT unzGetGlobalInfo (file,pglobal_info) + unzFile file; + unz_global_info *pglobal_info; +{ + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + *pglobal_info=s->gi; + return UNZ_OK; +} + + +/* + Translate date/time from Dos format to tm_unz (readable more easilty) +*/ +local void unzlocal_DosDateToTmuDate (ulDosDate, ptm) + uLong ulDosDate; + tm_unz* ptm; +{ + uLong uDate; + uDate = (uLong)(ulDosDate>>16); + ptm->tm_mday = (uInt)(uDate&0x1f) ; + ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; + ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; + + ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); + ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; + ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; +} + +/* + Get Info about the current file in the zipfile, with internal only info +*/ +local int unzlocal_GetCurrentFileInfoInternal OF((unzFile file, + unz_file_info *pfile_info, + unz_file_info_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); + +local int unzlocal_GetCurrentFileInfoInternal (file, + pfile_info, + pfile_info_internal, + szFileName, fileNameBufferSize, + extraField, extraFieldBufferSize, + szComment, commentBufferSize) + unzFile file; + unz_file_info *pfile_info; + unz_file_info_internal *pfile_info_internal; + char *szFileName; + uLong fileNameBufferSize; + void *extraField; + uLong extraFieldBufferSize; + char *szComment; + uLong commentBufferSize; +{ + unz_s* s; + unz_file_info file_info; + unz_file_info_internal file_info_internal; + int err=UNZ_OK; + uLong uMagic; + long lSeek=0; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (ZSEEK(s->z_filefunc, s->filestream, + s->pos_in_central_dir+s->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + + /* we check the magic */ + if (err==UNZ_OK) + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x02014b50) + err=UNZ_BADZIPFILE; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK) + err=UNZ_ERRNO; + + unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK) + err=UNZ_ERRNO; + + lSeek+=file_info.size_filename; + if ((err==UNZ_OK) && (szFileName!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_filename0) && (fileNameBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek -= uSizeRead; + } + + + if ((err==UNZ_OK) && (extraField!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_extraz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,extraField,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek += file_info.size_file_extra - uSizeRead; + } + else + lSeek+=file_info.size_file_extra; + + + if ((err==UNZ_OK) && (szComment!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_commentz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)!=0) + err=UNZ_ERRNO; + if ((file_info.size_file_comment>0) && (commentBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + } + + if ((err==UNZ_OK) && (pfile_info!=NULL)) + *pfile_info=file_info; + + if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) + *pfile_info_internal=file_info_internal; + + return err; +} + + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. +*/ +extern int ZEXPORT unzGetCurrentFileInfo (file, + pfile_info, + szFileName, fileNameBufferSize, + extraField, extraFieldBufferSize, + szComment, commentBufferSize) + unzFile file; + unz_file_info *pfile_info; + char *szFileName; + uLong fileNameBufferSize; + void *extraField; + uLong extraFieldBufferSize; + char *szComment; + uLong commentBufferSize; +{ + return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); +} + +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ +extern int ZEXPORT unzGoToFirstFile (file) + unzFile file; +{ + int err; + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + s->pos_in_central_dir=s->offset_central_dir; + s->num_file=0; + err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ +extern int ZEXPORT unzGoToNextFile (file) + unzFile file; +{ + unz_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */ + if (s->num_file+1==s->gi.number_entry) + return UNZ_END_OF_LIST_OF_FILE; + + s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + + s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; + s->num_file++; + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + + +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzipStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ +extern int ZEXPORT unzLocateFile (file, szFileName, iCaseSensitivity) + unzFile file; + const char *szFileName; + int iCaseSensitivity; +{ + unz_s* s; + int err; + + /* We remember the 'current' position in the file so that we can jump + * back there if we fail. + */ + unz_file_info cur_file_infoSaved; + unz_file_info_internal cur_file_info_internalSaved; + uLong num_fileSaved; + uLong pos_in_central_dirSaved; + + + if (file==NULL) + return UNZ_PARAMERROR; + + if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) + return UNZ_PARAMERROR; + + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + /* Save the current state */ + num_fileSaved = s->num_file; + pos_in_central_dirSaved = s->pos_in_central_dir; + cur_file_infoSaved = s->cur_file_info; + cur_file_info_internalSaved = s->cur_file_info_internal; + + err = unzGoToFirstFile(file); + + while (err == UNZ_OK) + { + char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; + err = unzGetCurrentFileInfo(file,NULL, + szCurrentFileName,sizeof(szCurrentFileName)-1, + NULL,0,NULL,0); + if (err == UNZ_OK) + { + if (unzStringFileNameCompare(szCurrentFileName, + szFileName,iCaseSensitivity)==0) + return UNZ_OK; + err = unzGoToNextFile(file); + } + } + + /* We failed, so restore the state of the 'current file' to where we + * were. + */ + s->num_file = num_fileSaved ; + s->pos_in_central_dir = pos_in_central_dirSaved ; + s->cur_file_info = cur_file_infoSaved; + s->cur_file_info_internal = cur_file_info_internalSaved; + return err; +} + + +/* +/////////////////////////////////////////// +// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net) +// I need random access +// +// Further optimization could be realized by adding an ability +// to cache the directory in memory. The goal being a single +// comprehensive file read to put the file I need in a memory. +*/ + +/* +typedef struct unz_file_pos_s +{ + uLong pos_in_zip_directory; // offset in file + uLong num_of_file; // # of file +} unz_file_pos; +*/ + +extern int ZEXPORT unzGetFilePos(file, file_pos) + unzFile file; + unz_file_pos* file_pos; +{ + unz_s* s; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + file_pos->pos_in_zip_directory = s->pos_in_central_dir; + file_pos->num_of_file = s->num_file; + + return UNZ_OK; +} + +extern int ZEXPORT unzGoToFilePos(file, file_pos) + unzFile file; + unz_file_pos* file_pos; +{ + unz_s* s; + int err; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + /* jump to the right spot */ + s->pos_in_central_dir = file_pos->pos_in_zip_directory; + s->num_file = file_pos->num_of_file; + + /* set the current file */ + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + /* return results */ + s->current_file_ok = (err == UNZ_OK); + return err; +} + +/* +// Unzip Helper Functions - should be here? +/////////////////////////////////////////// +*/ + +/* + Read the local header of the current zipfile + Check the coherency of the local header and info in the end of central + directory about this file + store in *piSizeVar the size of extra info in local header + (filename and size of extra field data) +*/ +local int unzlocal_CheckCurrentFileCoherencyHeader (s,piSizeVar, + poffset_local_extrafield, + psize_local_extrafield) + unz_s* s; + uInt* piSizeVar; + uLong *poffset_local_extrafield; + uInt *psize_local_extrafield; +{ + uLong uMagic,uData,uFlags; + uLong size_filename; + uLong size_extra_field; + int err=UNZ_OK; + + *piSizeVar = 0; + *poffset_local_extrafield = 0; + *psize_local_extrafield = 0; + + if (ZSEEK(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile + + s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + + if (err==UNZ_OK) + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x04034b50) + err=UNZ_BADZIPFILE; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; +/* + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) + err=UNZ_BADZIPFILE; +*/ + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) + err=UNZ_BADZIPFILE; + + if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */ + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) + err=UNZ_BADZIPFILE; + + *piSizeVar += (uInt)size_filename; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK) + err=UNZ_ERRNO; + *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + + SIZEZIPLOCALHEADER + size_filename; + *psize_local_extrafield = (uInt)size_extra_field; + + *piSizeVar += (uInt)size_extra_field; + + return err; +} + +/* + Open for reading data the current file in the zipfile. + If there is no error and the file is opened, the return value is UNZ_OK. +*/ +extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password) + unzFile file; + int* method; + int* level; + int raw; + const char* password; +{ + int err; + uInt iSizeVar; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uLong offset_local_extrafield; /* offset of the local extra field */ + uInt size_local_extrafield; /* size of the local extra field */ +# ifndef NOUNCRYPT + char source[12]; +# else + if (password != NULL) + return UNZ_PARAMERROR; +# endif + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_PARAMERROR; + + if (s->pfile_in_zip_read != NULL) + unzCloseCurrentFile(file); + + if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, + &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) + return UNZ_BADZIPFILE; + + pfile_in_zip_read_info = (file_in_zip_read_info_s*) + ALLOC(sizeof(file_in_zip_read_info_s)); + if (pfile_in_zip_read_info==NULL) + return UNZ_INTERNALERROR; + + pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE); + pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; + pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; + pfile_in_zip_read_info->pos_local_extrafield=0; + pfile_in_zip_read_info->raw=raw; + + if (pfile_in_zip_read_info->read_buffer==NULL) + { + TRYFREE(pfile_in_zip_read_info); + return UNZ_INTERNALERROR; + } + + pfile_in_zip_read_info->stream_initialised=0; + + if (method!=NULL) + *method = (int)s->cur_file_info.compression_method; + + if (level!=NULL) + { + *level = 6; + switch (s->cur_file_info.flag & 0x06) + { + case 6 : *level = 1; break; + case 4 : *level = 2; break; + case 2 : *level = 9; break; + } + } + + /* TOFIX: this code has no effect since err value is unused + if ((s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + */ + + pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; + pfile_in_zip_read_info->crc32=0; + pfile_in_zip_read_info->compression_method = + s->cur_file_info.compression_method; + pfile_in_zip_read_info->filestream=s->filestream; + pfile_in_zip_read_info->z_filefunc=s->z_filefunc; + pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; + + pfile_in_zip_read_info->stream.total_out = 0; + + if ((s->cur_file_info.compression_method==Z_DEFLATED) && + (!raw)) + { + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidpf)0; + pfile_in_zip_read_info->stream.next_in = (voidpf)0; + pfile_in_zip_read_info->stream.avail_in = 0; + + err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=1; + else + { + TRYFREE(pfile_in_zip_read_info); + return err; + } + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. + * In unzip, i don't wait absolutely Z_STREAM_END because I known the + * size of both compressed and uncompressed data + */ + } + pfile_in_zip_read_info->rest_read_compressed = + s->cur_file_info.compressed_size ; + pfile_in_zip_read_info->rest_read_uncompressed = + s->cur_file_info.uncompressed_size ; + + + pfile_in_zip_read_info->pos_in_zipfile = + s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + + iSizeVar; + + pfile_in_zip_read_info->stream.avail_in = (uInt)0; + + s->pfile_in_zip_read = pfile_in_zip_read_info; + +# ifndef NOUNCRYPT + if (password != NULL) + { + int i; + s->pcrc_32_tab = get_crc_table(); + init_keys(password,s->keys,s->pcrc_32_tab); + if (ZSEEK(s->z_filefunc, s->filestream, + s->pfile_in_zip_read->pos_in_zipfile + + s->pfile_in_zip_read->byte_before_the_zipfile, + SEEK_SET)!=0) + return UNZ_INTERNALERROR; + if(ZREAD(s->z_filefunc, s->filestream,source, 12)<12) + return UNZ_INTERNALERROR; + + for (i = 0; i<12; i++) + zdecode(s->keys,s->pcrc_32_tab,source[i]); + + s->pfile_in_zip_read->pos_in_zipfile+=12; + s->encrypted=1; + } +# endif + + + return UNZ_OK; +} + +extern int ZEXPORT unzOpenCurrentFile (file) + unzFile file; +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL); +} + +extern int ZEXPORT unzOpenCurrentFilePassword (file, password) + unzFile file; + const char* password; +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, password); +} + +extern int ZEXPORT unzOpenCurrentFile2 (file,method,level,raw) + unzFile file; + int* method; + int* level; + int raw; +{ + return unzOpenCurrentFile3(file, method, level, raw, NULL); +} + +/* + Read bytes from the current file. + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ +extern int ZEXPORT unzReadCurrentFile (file, buf, len) + unzFile file; + voidp buf; + unsigned len; +{ + int err=UNZ_OK; + uInt iRead = 0; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->read_buffer == NULL)) + return UNZ_END_OF_LIST_OF_FILE; + if (len==0) + return 0; + + pfile_in_zip_read_info->stream.next_out = (Bytef*)buf; + + pfile_in_zip_read_info->stream.avail_out = (uInt)len; + + if ((len>pfile_in_zip_read_info->rest_read_uncompressed) && + (!(pfile_in_zip_read_info->raw))) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_uncompressed; + + if ((len>pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in) && + (pfile_in_zip_read_info->raw)) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in; + + while (pfile_in_zip_read_info->stream.avail_out>0) + { + if ((pfile_in_zip_read_info->stream.avail_in==0) && + (pfile_in_zip_read_info->rest_read_compressed>0)) + { + uInt uReadThis = UNZ_BUFSIZE; + if (pfile_in_zip_read_info->rest_read_compressedrest_read_compressed; + if (uReadThis == 0) + return UNZ_EOF; + if (ZSEEK(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + if (ZREAD(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->read_buffer, + uReadThis)!=uReadThis) + return UNZ_ERRNO; + + +# ifndef NOUNCRYPT + if(s->encrypted) + { + uInt i; + for(i=0;iread_buffer[i] = + zdecode(s->keys,s->pcrc_32_tab, + pfile_in_zip_read_info->read_buffer[i]); + } +# endif + + + pfile_in_zip_read_info->pos_in_zipfile += uReadThis; + + pfile_in_zip_read_info->rest_read_compressed-=uReadThis; + + pfile_in_zip_read_info->stream.next_in = + (Bytef*)pfile_in_zip_read_info->read_buffer; + pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; + } + + if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw)) + { + uInt uDoCopy,i ; + + if ((pfile_in_zip_read_info->stream.avail_in == 0) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + return (iRead==0) ? UNZ_EOF : iRead; + + if (pfile_in_zip_read_info->stream.avail_out < + pfile_in_zip_read_info->stream.avail_in) + uDoCopy = pfile_in_zip_read_info->stream.avail_out ; + else + uDoCopy = pfile_in_zip_read_info->stream.avail_in ; + + for (i=0;istream.next_out+i) = + *(pfile_in_zip_read_info->stream.next_in+i); + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, + pfile_in_zip_read_info->stream.next_out, + uDoCopy); + pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; + pfile_in_zip_read_info->stream.avail_in -= uDoCopy; + pfile_in_zip_read_info->stream.avail_out -= uDoCopy; + pfile_in_zip_read_info->stream.next_out += uDoCopy; + pfile_in_zip_read_info->stream.next_in += uDoCopy; + pfile_in_zip_read_info->stream.total_out += uDoCopy; + iRead += uDoCopy; + } + else + { + uLong uTotalOutBefore,uTotalOutAfter; + const Bytef *bufBefore; + uLong uOutThis; + int flush=Z_SYNC_FLUSH; + + uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; + bufBefore = pfile_in_zip_read_info->stream.next_out; + + /* + if ((pfile_in_zip_read_info->rest_read_uncompressed == + pfile_in_zip_read_info->stream.avail_out) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + flush = Z_FINISH; + */ + err=inflate(&pfile_in_zip_read_info->stream,flush); + + if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL)) + err = Z_DATA_ERROR; + + uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; + uOutThis = uTotalOutAfter-uTotalOutBefore; + + pfile_in_zip_read_info->crc32 = + crc32(pfile_in_zip_read_info->crc32,bufBefore, + (uInt)(uOutThis)); + + pfile_in_zip_read_info->rest_read_uncompressed -= + uOutThis; + + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + if (err==Z_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=Z_OK) + break; + } + } + + if (err==Z_OK) + return iRead; + return err; +} + + +/* + Give the current position in uncompressed data +*/ +extern z_off_t ZEXPORT unztell (file) + unzFile file; +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + return (z_off_t)pfile_in_zip_read_info->stream.total_out; +} + + +/* + return 1 if the end of file was reached, 0 elsewhere +*/ +extern int ZEXPORT unzeof (file) + unzFile file; +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + return 1; + else + return 0; +} + + + +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field that can be read + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ +extern int ZEXPORT unzGetLocalExtrafield (file,buf,len) + unzFile file; + voidp buf; + unsigned len; +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uInt read_now; + uLong size_to_read; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + size_to_read = (pfile_in_zip_read_info->size_local_extrafield - + pfile_in_zip_read_info->pos_local_extrafield); + + if (buf==NULL) + return (int)size_to_read; + + if (len>size_to_read) + read_now = (uInt)size_to_read; + else + read_now = (uInt)len ; + + if (read_now==0) + return 0; + + if (ZSEEK(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->offset_local_extrafield + + pfile_in_zip_read_info->pos_local_extrafield, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (ZREAD(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + buf,read_now)!=read_now) + return UNZ_ERRNO; + + return (int)read_now; +} + +/* + Close the file in zip opened with unzipOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ +extern int ZEXPORT unzCloseCurrentFile (file) + unzFile file; +{ + int err=UNZ_OK; + + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) && + (!pfile_in_zip_read_info->raw)) + { + if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) + err=UNZ_CRCERROR; + } + + + TRYFREE(pfile_in_zip_read_info->read_buffer); + pfile_in_zip_read_info->read_buffer = NULL; + if (pfile_in_zip_read_info->stream_initialised) + inflateEnd(&pfile_in_zip_read_info->stream); + + pfile_in_zip_read_info->stream_initialised = 0; + TRYFREE(pfile_in_zip_read_info); + + s->pfile_in_zip_read=NULL; + + return err; +} + + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ +extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf) + unzFile file; + char *szComment; + uLong uSizeBuf; +{ + unz_s* s; + uLong uReadThis ; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + uReadThis = uSizeBuf; + if (uReadThis>s->gi.size_comment) + uReadThis = s->gi.size_comment; + + if (ZSEEK(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (uReadThis>0) + { + *szComment='\0'; + if (ZREAD(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis) + return UNZ_ERRNO; + } + + if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) + *(szComment+s->gi.size_comment)='\0'; + return (int)uReadThis; +} + +/* Additions by RX '2004 */ +extern uLong ZEXPORT unzGetOffset (file) + unzFile file; +{ + unz_s* s; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return 0; + if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff) + if (s->num_file==s->gi.number_entry) + return 0; + return s->pos_in_central_dir; +} + +extern int ZEXPORT unzSetOffset (file, pos) + unzFile file; + uLong pos; +{ + unz_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + s->pos_in_central_dir = pos; + s->num_file = s->gi.number_entry; /* hack */ + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} diff --git a/harbour/contrib/hbzlib/unzip.h b/harbour/contrib/hbzlib/unzip.h new file mode 100644 index 0000000000..b247937c80 --- /dev/null +++ b/harbour/contrib/hbzlib/unzip.h @@ -0,0 +1,354 @@ +/* unzip.h -- IO for uncompress .zip files using zlib + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g + WinZip, InfoZip tools and compatible. + + Multi volume ZipFile (span) are not supported. + Encryption compatible with pkzip 2.04g only supported + Old compressions used by old PKZip 1.x are not supported + + + I WAIT FEEDBACK at mail info@winimage.com + Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + +*/ + +/* for more info about .ZIP format, see + http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip + http://www.info-zip.org/pub/infozip/doc/ + PkWare has also a specification at : + ftp://ftp.pkware.com/probdesc.zip +*/ + +#ifndef _unz_H +#define _unz_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagunzFile__ { int unused; } unzFile__; +typedef unzFile__ *unzFile; +#else +typedef voidp unzFile; +#endif + + +#define UNZ_OK (0) +#define UNZ_END_OF_LIST_OF_FILE (-100) +#define UNZ_ERRNO (Z_ERRNO) +#define UNZ_EOF (0) +#define UNZ_PARAMERROR (-102) +#define UNZ_BADZIPFILE (-103) +#define UNZ_INTERNALERROR (-104) +#define UNZ_CRCERROR (-105) + +/* tm_unz contain date/time info */ +typedef struct tm_unz_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_unz; + +/* unz_global_info structure contain global data about the ZIPfile + These data comes from the end of central dir */ +typedef struct unz_global_info_s +{ + uLong number_entry; /* total number of entries in + the central dir on this disk */ + uLong size_comment; /* size of the global comment of the zipfile */ +} unz_global_info; + + +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_info_s +{ + uLong version; /* version made by 2 bytes */ + uLong version_needed; /* version needed to extract 2 bytes */ + uLong flag; /* general purpose bit flag 2 bytes */ + uLong compression_method; /* compression method 2 bytes */ + uLong dosDate; /* last mod file date in Dos fmt 4 bytes */ + uLong crc; /* crc-32 4 bytes */ + uLong compressed_size; /* compressed size 4 bytes */ + uLong uncompressed_size; /* uncompressed size 4 bytes */ + uLong size_filename; /* filename length 2 bytes */ + uLong size_file_extra; /* extra field length 2 bytes */ + uLong size_file_comment; /* file comment length 2 bytes */ + + uLong disk_num_start; /* disk number start 2 bytes */ + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ + + tm_unz tmu_date; +} unz_file_info; + +extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1, + const char* fileName2, + int iCaseSensitivity)); +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) +*/ + + +extern unzFile ZEXPORT unzOpen OF((const char *path)); +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer + "zlib/zlib113.zip". + If the zipfile cannot be opened (file don't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ + +extern unzFile ZEXPORT unzOpen2 OF((const char *path, + zlib_filefunc_def* pzlib_filefunc_def)); +/* + Open a Zip file, like unzOpen, but provide a set of file low level API + for read/write the zip file (see ioapi.h) +*/ + +extern int ZEXPORT unzClose OF((unzFile file)); +/* + Close a ZipFile opened with unzipOpen. + If there is files inside the .Zip opened with unzOpenCurrentFile (see later), + these files MUST be closed with unzipCloseCurrentFile before call unzipClose. + return UNZ_OK if there is no problem. */ + +extern int ZEXPORT unzGetGlobalInfo OF((unzFile file, + unz_global_info *pglobal_info)); +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ + + +extern int ZEXPORT unzGetGlobalComment OF((unzFile file, + char *szComment, + uLong uSizeBuf)); +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ + + +/***************************************************************************/ +/* Unzip package allow you browse the directory of the zipfile */ + +extern int ZEXPORT unzGoToFirstFile OF((unzFile file)); +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ + +extern int ZEXPORT unzGoToNextFile OF((unzFile file)); +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ + +extern int ZEXPORT unzLocateFile OF((unzFile file, + const char *szFileName, + int iCaseSensitivity)); +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ + + +/* ****************************************** */ +/* Ryan supplied functions */ +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_pos_s +{ + uLong pos_in_zip_directory; /* offset in zip file directory */ + uLong num_of_file; /* # of file */ +} unz_file_pos; + +extern int ZEXPORT unzGetFilePos( + unzFile file, + unz_file_pos* file_pos); + +extern int ZEXPORT unzGoToFilePos( + unzFile file, + unz_file_pos* file_pos); + +/* ****************************************** */ + +extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file, + unz_file_info *pfile_info, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); +/* + Get Info about the current file + if pfile_info!=NULL, the *pfile_info structure will contain somes info about + the current file + if szFileName!=NULL, the filemane string will be copied in szFileName + (fileNameBufferSize is the size of the buffer) + if extraField!=NULL, the extra field information will be copied in extraField + (extraFieldBufferSize is the size of the buffer). + This is the Central-header version of the extra field + if szComment!=NULL, the comment string of the file will be copied in szComment + (commentBufferSize is the size of the buffer) +*/ + +/***************************************************************************/ +/* for reading the content of the current zipfile, you can open it, read data + from it, and close it (you can close it before reading all the file) + */ + +extern int ZEXPORT unzOpenCurrentFile OF((unzFile file)); +/* + Open for reading data the current file in the zipfile. + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file, + const char* password)); +/* + Open for reading data the current file in the zipfile. + password is a crypting password + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file, + int* method, + int* level, + int raw)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + +extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file, + int* method, + int* level, + int raw, + const char* password)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + + +extern int ZEXPORT unzCloseCurrentFile OF((unzFile file)); +/* + Close the file in zip opened with unzOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ + +extern int ZEXPORT unzReadCurrentFile OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read bytes from the current file (opened by unzOpenCurrentFile) + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ + +extern z_off_t ZEXPORT unztell OF((unzFile file)); +/* + Give the current position in uncompressed data +*/ + +extern int ZEXPORT unzeof OF((unzFile file)); +/* + return 1 if the end of file was reached, 0 elsewhere +*/ + +extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ + +/***************************************************************************/ + +/* Get the current file offset */ +extern uLong ZEXPORT unzGetOffset (unzFile file); + +/* Set the current file offset */ +extern int ZEXPORT unzSetOffset (unzFile file, uLong pos); + + + +#ifdef __cplusplus +} +#endif + +#endif /* _unz_H */ diff --git a/harbour/contrib/hbzlib/zconf.h b/harbour/contrib/hbzlib/zconf.h new file mode 100644 index 0000000000..03a9431c8b --- /dev/null +++ b/harbour/contrib/hbzlib/zconf.h @@ -0,0 +1,332 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + */ +#ifdef Z_PREFIX +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define deflateBound z_deflateBound +# define deflatePrime z_deflatePrime +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateCopy z_inflateCopy +# define inflateReset z_inflateReset +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table +# define zError z_zError + +# define alloc_func z_alloc_func +# define free_func z_free_func +# define in_func z_in_func +# define out_func z_out_func +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if 0 /* HAVE_UNISTD_H -- this line is updated by ./configure */ +# include /* for off_t */ +# include /* for SEEK_* and off_t */ +# ifdef VMS +# include /* for off_t */ +# endif +# define z_off_t off_t +#endif +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif + +#if defined(__OS400__) +# define NO_vsnprintf +#endif + +#if defined(__MVS__) +# define NO_vsnprintf +# ifdef FAR +# undef FAR +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(deflateBound,"DEBND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(compressBound,"CMBND") +# pragma map(inflate_table,"INTABL") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/harbour/contrib/hbzlib/zip.c b/harbour/contrib/hbzlib/zip.c new file mode 100644 index 0000000000..4108476d7f --- /dev/null +++ b/harbour/contrib/hbzlib/zip.c @@ -0,0 +1,1231 @@ +/* zip.c -- IO on .zip files using zlib + Version 1.01e, February 12th, 2005 + + 27 Dec 2004 Rolf Kalbermatter + Modification to zipOpen2 to support globalComment retrieval. + + Copyright (C) 1998-2005 Gilles Vollant + + Read zip.h for more info +*/ + + +#include +#include +#include +#include +#include "zlib.h" +#include "zip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +#ifndef VERSIONMADEBY +# define VERSIONMADEBY (0x0) /* platform depedent */ +#endif + +#ifndef Z_BUFSIZE +#define Z_BUFSIZE (16384) +#endif + +#ifndef Z_MAXFILENAMEINZIP +#define Z_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +/* +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) +*/ + +/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */ + +#ifndef SEEK_CUR +#define SEEK_CUR 1 +#endif + +#ifndef SEEK_END +#define SEEK_END 2 +#endif + +#ifndef SEEK_SET +#define SEEK_SET 0 +#endif + +#ifndef DEF_MEM_LEVEL +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +#endif +const char zip_copyright[] = + " zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + + +#define SIZEDATA_INDATABLOCK (4096-(4*4)) + +#define LOCALHEADERMAGIC (0x04034b50) +#define CENTRALHEADERMAGIC (0x02014b50) +#define ENDHEADERMAGIC (0x06054b50) + +#define FLAG_LOCALHEADER_OFFSET (0x06) +#define CRC_LOCALHEADER_OFFSET (0x0e) + +#define SIZECENTRALHEADER (0x2e) /* 46 */ + +typedef struct linkedlist_datablock_internal_s +{ + struct linkedlist_datablock_internal_s* next_datablock; + uLong avail_in_this_block; + uLong filled_in_this_block; + uLong unused; /* for future use and alignement */ + unsigned char data[SIZEDATA_INDATABLOCK]; +} linkedlist_datablock_internal; + +typedef struct linkedlist_data_s +{ + linkedlist_datablock_internal* first_block; + linkedlist_datablock_internal* last_block; +} linkedlist_data; + + +typedef struct +{ + z_stream stream; /* zLib stream structure for inflate */ + int stream_initialised; /* 1 is stream is initialised */ + uInt pos_in_buffered_data; /* last written byte in buffered_data */ + + uLong pos_local_header; /* offset of the local header of the file + currenty writing */ + char* central_header; /* central header data for the current file */ + uLong size_centralheader; /* size of the central header for cur file */ + uLong flag; /* flag of the file currently writing */ + + int method; /* compression method of file currenty wr.*/ + int raw; /* 1 for directly writing raw data */ + Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/ + uLong dosDate; + uLong crc32; + int encrypt; +#ifndef NOCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const unsigned long* pcrc_32_tab; + int crypt_header_size; +#endif +} curfile_info; + +typedef struct +{ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + linkedlist_data central_dir;/* datablock with central dir in construction*/ + int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/ + curfile_info ci; /* info on the file curretly writing */ + + uLong begin_pos; /* position of the beginning of the zipfile */ + uLong add_position_when_writting_offset; + uLong number_entry; +#ifndef NO_ADDFILEINEXISTINGZIP + char *globalcomment; +#endif +} zip_internal; + + + +#ifndef NOCRYPT +#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED +#include "crypt.h" +#endif + +/* Forward definitions */ +local linkedlist_datablock_internal* allocate_new_datablock( void ); +local void free_datablock( linkedlist_datablock_internal* ldi ); +local void init_linkedlist( linkedlist_data* ll ); +local int add_data_in_datablock( linkedlist_data* ll, const void* buf, uLong len ); +local uLong ziplocal_TmzDateToDosDate( const tm_zip* ptm, uLong dosDate ); + +local linkedlist_datablock_internal* allocate_new_datablock() +{ + linkedlist_datablock_internal* ldi; + ldi = (linkedlist_datablock_internal*) + ALLOC(sizeof(linkedlist_datablock_internal)); + if (ldi!=NULL) + { + ldi->next_datablock = NULL ; + ldi->filled_in_this_block = 0 ; + ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ; + } + return ldi; +} + +local void free_datablock(ldi) + linkedlist_datablock_internal* ldi; +{ + while (ldi!=NULL) + { + linkedlist_datablock_internal* ldinext = ldi->next_datablock; + TRYFREE(ldi); + ldi = ldinext; + } +} + +local void init_linkedlist(ll) + linkedlist_data* ll; +{ + ll->first_block = ll->last_block = NULL; +} + +local void free_linkedlist(ll) + linkedlist_data* ll; +{ + free_datablock(ll->first_block); + ll->first_block = ll->last_block = NULL; +} + + +local int add_data_in_datablock(ll,buf,len) + linkedlist_data* ll; + const void* buf; + uLong len; +{ + linkedlist_datablock_internal* ldi; + const unsigned char* from_copy; + + if (ll==NULL) + return ZIP_INTERNALERROR; + + if (ll->last_block == NULL) + { + ll->first_block = ll->last_block = allocate_new_datablock(); + if (ll->first_block == NULL) + return ZIP_INTERNALERROR; + } + + ldi = ll->last_block; + from_copy = (unsigned char*)buf; + + while (len>0) + { + uInt copy_this; + uInt i; + unsigned char* to_copy; + + if (ldi->avail_in_this_block==0) + { + ldi->next_datablock = allocate_new_datablock(); + if (ldi->next_datablock == NULL) + return ZIP_INTERNALERROR; + ldi = ldi->next_datablock ; + ll->last_block = ldi; + } + + if (ldi->avail_in_this_block < len) + copy_this = (uInt)ldi->avail_in_this_block; + else + copy_this = (uInt)len; + + to_copy = &(ldi->data[ldi->filled_in_this_block]); + + for (i=0;ifilled_in_this_block += copy_this; + ldi->avail_in_this_block -= copy_this; + from_copy += copy_this ; + len -= copy_this; + } + return ZIP_OK; +} + + + +/****************************************************************************/ + +#ifndef NO_ADDFILEINEXISTINGZIP +/* =========================================================================== + Inputs a long in LSB order to the given file + nbByte == 1, 2 or 4 (byte, short or long) +*/ + +local int ziplocal_putValue OF((const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, uLong x, int nbByte)); +local int ziplocal_putValue (pzlib_filefunc_def, filestream, x, nbByte) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong x; + int nbByte; +{ + unsigned char buf[4]; + int n; + for (n = 0; n < nbByte; n++) + { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + if (x != 0) + { /* data overflow - hack for ZIP64 (X Roche) */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } + + if (ZWRITE(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte) + return ZIP_ERRNO; + else + return ZIP_OK; +} + +local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte)); +local void ziplocal_putValue_inmemory (dest, x, nbByte) + void* dest; + uLong x; + int nbByte; +{ + unsigned char* buf=(unsigned char*)dest; + int n; + for (n = 0; n < nbByte; n++) { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + + if (x != 0) + { /* data overflow - hack for ZIP64 */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } +} + +/****************************************************************************/ + + +local uLong ziplocal_TmzDateToDosDate(ptm,dosDate) + const tm_zip* ptm; + uLong dosDate; +{ + uLong year = (uLong)ptm->tm_year; + + (void) dosDate; + + if (year>1980) + year-=1980; + else if (year>80) + year-=80; + return + (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) | + ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour)); +} + + +/****************************************************************************/ + +local int ziplocal_getByte OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + int *pi)); + +local int ziplocal_getByte(pzlib_filefunc_def,filestream,pi) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + int *pi; +{ + unsigned char c; + int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return ZIP_OK; + } + else + { + if (ZERROR(*pzlib_filefunc_def,filestream)) + return ZIP_ERRNO; + else + return ZIP_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int ziplocal_getShort OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int ziplocal_getShort (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int ziplocal_getLong OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int ziplocal_getLong (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<16; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local uLong ziplocal_SearchCentralDir OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream)); + +local uLong ziplocal_SearchCentralDir(pzlib_filefunc_def,filestream) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; +{ + unsigned char* buf; + uLong uSizeFile; + uLong uBackRead; + uLong uMaxBack=0xffff; /* maximum size of global comment */ + uLong uPosFound=0; + + if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); + if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} +#endif /* !NO_ADDFILEINEXISTINGZIP*/ + +/************************************************************/ +extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc_def) + const char *pathname; + int append; + zipcharpc* globalcomment; + zlib_filefunc_def* pzlib_filefunc_def; +{ + zip_internal ziinit; + zip_internal* zi; + int err=ZIP_OK; + + + if (pzlib_filefunc_def==NULL) + fill_fopen_filefunc(&ziinit.z_filefunc); + else + ziinit.z_filefunc = *pzlib_filefunc_def; + + ziinit.filestream = (*(ziinit.z_filefunc.zopen_file)) + (ziinit.z_filefunc.opaque, + pathname, + (append == APPEND_STATUS_CREATE) ? + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) : + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING)); + + if (ziinit.filestream == NULL) + return NULL; + ziinit.begin_pos = ZTELL(ziinit.z_filefunc,ziinit.filestream); + ziinit.in_opened_file_inzip = 0; + ziinit.ci.stream_initialised = 0; + ziinit.number_entry = 0; + ziinit.add_position_when_writting_offset = 0; + init_linkedlist(&(ziinit.central_dir)); + + + zi = (zip_internal*)ALLOC(sizeof(zip_internal)); + if (zi==NULL) + { + ZCLOSE(ziinit.z_filefunc,ziinit.filestream); + return NULL; + } + + /* now we add file in a zipfile */ +# ifndef NO_ADDFILEINEXISTINGZIP + ziinit.globalcomment = NULL; + if (append == APPEND_STATUS_ADDINZIP) + { + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + + uLong size_central_dir; /* size of the central directory */ + uLong offset_central_dir; /* offset of start of central directory */ + uLong central_pos,uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + uLong number_entry; + uLong number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + uLong size_comment; + + central_pos = ziplocal_SearchCentralDir(&ziinit.z_filefunc,ziinit.filestream); + if (central_pos==0) + err=ZIP_ERRNO; + + if (ZSEEK(ziinit.z_filefunc, ziinit.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=ZIP_ERRNO; + + /* the signature, already checked */ + if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&uL)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of this disk */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of the disk with the start of the central directory */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk_with_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central dir */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + if ((number_entry_CD!=number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=ZIP_BADZIPFILE; + + /* size of the central directory */ + if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&size_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&offset_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + /* zipfile global comment length */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&size_comment)!=ZIP_OK) + err=ZIP_ERRNO; + + if ((central_pos0) + { + ziinit.globalcomment = ALLOC(size_comment+1); + if (ziinit.globalcomment) + { + size_comment = ZREAD(ziinit.z_filefunc, ziinit.filestream,ziinit.globalcomment,size_comment); + ziinit.globalcomment[size_comment]=0; + } + } + + byte_before_the_zipfile = central_pos - + (offset_central_dir+size_central_dir); + ziinit.add_position_when_writting_offset = byte_before_the_zipfile; + + { + uLong size_central_dir_to_read = size_central_dir; + size_t buf_size = SIZEDATA_INDATABLOCK; + void* buf_read = (void*)ALLOC(buf_size); + if (ZSEEK(ziinit.z_filefunc, ziinit.filestream, + offset_central_dir + byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + while ((size_central_dir_to_read>0) && (err==ZIP_OK)) + { + uLong read_this = SIZEDATA_INDATABLOCK; + if (read_this > size_central_dir_to_read) + read_this = size_central_dir_to_read; + if (ZREAD(ziinit.z_filefunc, ziinit.filestream,buf_read,read_this) != read_this) + err=ZIP_ERRNO; + + if (err==ZIP_OK) + err = add_data_in_datablock(&ziinit.central_dir,buf_read, + (uLong)read_this); + size_central_dir_to_read-=read_this; + } + TRYFREE(buf_read); + } + ziinit.begin_pos = byte_before_the_zipfile; + ziinit.number_entry = number_entry_CD; + + if (ZSEEK(ziinit.z_filefunc, ziinit.filestream, + offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=ZIP_ERRNO; + } + + if (globalcomment) + { + *globalcomment = ziinit.globalcomment; + } +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + + if (err != ZIP_OK) + { +# ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(ziinit.globalcomment); +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + TRYFREE(zi); + return NULL; + } + else + { + *zi = ziinit; + return (zipFile)zi; + } +} + +extern zipFile ZEXPORT zipOpen (pathname, append) + const char *pathname; + int append; +{ + return zipOpen2(pathname,append,NULL,NULL); +} + +extern int ZEXPORT zipOpenNewFileInZip3 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting) + zipFile file; + const char* filename; + const zip_fileinfo* zipfi; + const void* extrafield_local; + uInt size_extrafield_local; + const void* extrafield_global; + uInt size_extrafield_global; + const char* comment; + int method; + int level; + int raw; + int windowBits; + int memLevel; + int strategy; + const char* password; + uLong crcForCrypting; +{ + zip_internal* zi; + uInt size_filename; + uInt size_comment; + uInt i; + int err; + + (void) crcForCrypting; + +# ifdef NOCRYPT + if (password != NULL) + return ZIP_PARAMERROR; +# endif + + if (file == NULL) + return ZIP_PARAMERROR; + if ((method!=0) && (method!=Z_DEFLATED)) + return ZIP_PARAMERROR; + + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + if (err != ZIP_OK) + return err; + } + + + if (filename==NULL) + filename="-"; + + if (comment==NULL) + size_comment = 0; + else + size_comment = (uInt)strlen(comment); + + size_filename = (uInt)strlen(filename); + + if (zipfi == NULL) + zi->ci.dosDate = 0; + else + { + if (zipfi->dosDate != 0) + zi->ci.dosDate = zipfi->dosDate; + else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate); + } + + zi->ci.flag = 0; + if ((level==8) || (level==9)) + zi->ci.flag |= 2; + if ((level==2)) + zi->ci.flag |= 4; + if ((level==1)) + zi->ci.flag |= 6; + if (password != NULL) + zi->ci.flag |= 1; + + zi->ci.crc32 = 0; + zi->ci.method = method; + zi->ci.encrypt = 0; + zi->ci.stream_initialised = 0; + zi->ci.pos_in_buffered_data = 0; + zi->ci.raw = raw; + zi->ci.pos_local_header = ZTELL(zi->z_filefunc,zi->filestream) ; + zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + + size_extrafield_global + size_comment; + zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader); + + ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4); + /* version info */ + ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2); + ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2); + ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2); + ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2); + ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4); + ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/ + ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/ + ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/ + ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2); + ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2); + ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2); + ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/ + + if (zipfi==NULL) + ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); + else + ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); + + if (zipfi==NULL) + ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); + else + ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4); + + ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header- zi->add_position_when_writting_offset,4); + + for (i=0;ici.central_header+SIZECENTRALHEADER+i) = *(filename+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+i) = + *(((const char*)extrafield_global)+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+ + size_extrafield_global+i) = *(comment+i); + if (zi->ci.central_header == NULL) + return ZIP_INTERNALERROR; + + /* write the local header */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC,4); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */ + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */ + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */ + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */ + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield_local,2); + + if ((err==ZIP_OK) && (size_filename>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename) + err = ZIP_ERRNO; + + if ((err==ZIP_OK) && (size_extrafield_local>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream,extrafield_local,size_extrafield_local) + !=size_extrafield_local) + err = ZIP_ERRNO; + + zi->ci.stream.avail_in = (uInt)0; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + zi->ci.stream.total_in = 0; + zi->ci.stream.total_out = 0; + + if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + zi->ci.stream.zalloc = (alloc_func)0; + zi->ci.stream.zfree = (free_func)0; + zi->ci.stream.opaque = (voidpf)0; + + if (windowBits>0) + windowBits = -windowBits; + + err = deflateInit2(&zi->ci.stream, level, + Z_DEFLATED, windowBits, memLevel, strategy); + + if (err==Z_OK) + zi->ci.stream_initialised = 1; + } +# ifndef NOCRYPT + zi->ci.crypt_header_size = 0; + if ((err==Z_OK) && (password != NULL)) + { + unsigned char bufHead[RAND_HEAD_LEN]; + unsigned int sizeHead; + zi->ci.encrypt = 1; + zi->ci.pcrc_32_tab = get_crc_table(); + /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/ + + sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting); + zi->ci.crypt_header_size = sizeHead; + + if (ZWRITE(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead) + err = ZIP_ERRNO; + } +# endif + + if (err==Z_OK) + zi->in_opened_file_inzip = 1; + return err; +} + +extern int ZEXPORT zipOpenNewFileInZip2(file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw) + zipFile file; + const char* filename; + const zip_fileinfo* zipfi; + const void* extrafield_local; + uInt size_extrafield_local; + const void* extrafield_global; + uInt size_extrafield_global; + const char* comment; + int method; + int level; + int raw; +{ + return zipOpenNewFileInZip3 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level) + zipFile file; + const char* filename; + const zip_fileinfo* zipfi; + const void* extrafield_local; + uInt size_extrafield_local; + const void* extrafield_global; + uInt size_extrafield_global; + const char* comment; + int method; + int level; +{ + return zipOpenNewFileInZip2 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, 0); +} + +local int zipFlushWriteBuffer(zip_internal* zi) +{ + int err=ZIP_OK; + + if (zi->ci.encrypt != 0) + { +#ifndef NOCRYPT + uInt i; + int t; + for (i=0;ici.pos_in_buffered_data;i++) + zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab, + zi->ci.buffered_data[i],t); +#endif + } + if (ZWRITE(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data) + !=zi->ci.pos_in_buffered_data) + err = ZIP_ERRNO; + zi->ci.pos_in_buffered_data = 0; + return err; +} + +extern int ZEXPORT zipWriteInFileInZip (file, buf, len) + zipFile file; + const void* buf; + unsigned len; +{ + zip_internal* zi; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + + zi->ci.stream.next_in = (void*)buf; + zi->ci.stream.avail_in = len; + zi->ci.crc32 = crc32(zi->ci.crc32,buf,len); + + while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0)) + { + if (zi->ci.stream.avail_out == 0) + { + if (zipFlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + + + if(err != ZIP_OK) + break; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + uLong uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_NO_FLUSH); + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + + } + else + { + uInt copy_this,i; + if (zi->ci.stream.avail_in < zi->ci.stream.avail_out) + copy_this = zi->ci.stream.avail_in; + else + copy_this = zi->ci.stream.avail_out; + for (i=0;ici.stream.next_out)+i) = + *(((const char*)zi->ci.stream.next_in)+i); + { + zi->ci.stream.avail_in -= copy_this; + zi->ci.stream.avail_out-= copy_this; + zi->ci.stream.next_in+= copy_this; + zi->ci.stream.next_out+= copy_this; + zi->ci.stream.total_in+= copy_this; + zi->ci.stream.total_out+= copy_this; + zi->ci.pos_in_buffered_data += copy_this; + } + } + } + + return err; +} + +extern int ZEXPORT zipCloseFileInZipRaw (file, uncompressed_size, crc32) + zipFile file; + uLong uncompressed_size; + uLong crc32; +{ + zip_internal* zi; + uLong compressed_size; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + zi->ci.stream.avail_in = 0; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + while (err==ZIP_OK) + { + uLong uTotalOutBefore; + if (zi->ci.stream.avail_out == 0) + { + if (zipFlushWriteBuffer(zi) == ZIP_ERRNO) + /* err = ZIP_ERRNO; TOFIX: this line is meaningless and + commented to pacify warning but error is possible */ + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_FINISH); + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + } + + if (err==Z_STREAM_END) + err=ZIP_OK; /* this is normal */ + + if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK)) + if (zipFlushWriteBuffer(zi)==ZIP_ERRNO) + err = ZIP_ERRNO; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + err=deflateEnd(&zi->ci.stream); + zi->ci.stream_initialised = 0; + } + + if (!zi->ci.raw) + { + crc32 = (uLong)zi->ci.crc32; + uncompressed_size = (uLong)zi->ci.stream.total_in; + } + compressed_size = (uLong)zi->ci.stream.total_out; +# ifndef NOCRYPT + compressed_size += zi->ci.crypt_header_size; +# endif + + ziplocal_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/ + ziplocal_putValue_inmemory(zi->ci.central_header+20, + compressed_size,4); /*compr size*/ + if (zi->ci.stream.data_type == Z_ASCII) + ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2); + ziplocal_putValue_inmemory(zi->ci.central_header+24, + uncompressed_size,4); /*uncompr size*/ + + if (err==ZIP_OK) + err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header, + (uLong)zi->ci.size_centralheader); + free(zi->ci.central_header); + + if (err==ZIP_OK) + { + long cur_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream); + if (ZSEEK(zi->z_filefunc,zi->filestream, + zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */ + + if (err==ZIP_OK) /* compressed size, unknown */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4); + + if (err==ZIP_OK) /* uncompressed size, unknown */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4); + + if (ZSEEK(zi->z_filefunc,zi->filestream, + cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + } + + zi->number_entry ++; + zi->in_opened_file_inzip = 0; + + return err; +} + +extern int ZEXPORT zipCloseFileInZip (file) + zipFile file; +{ + return zipCloseFileInZipRaw (file,0,0); +} + +extern int ZEXPORT zipClose (file, global_comment) + zipFile file; + const char* global_comment; +{ + zip_internal* zi; + int err = 0; + uLong size_centraldir = 0; + uLong centraldir_pos_inzip; + uInt size_global_comment; + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + } + +#ifndef NO_ADDFILEINEXISTINGZIP + if (global_comment==NULL) + global_comment = zi->globalcomment; +#endif + if (global_comment==NULL) + size_global_comment = 0; + else + size_global_comment = (uInt)strlen(global_comment); + + centraldir_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream); + if (err==ZIP_OK) + { + linkedlist_datablock_internal* ldi = zi->central_dir.first_block ; + while (ldi!=NULL) + { + if ((err==ZIP_OK) && (ldi->filled_in_this_block>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream, + ldi->data,ldi->filled_in_this_block) + !=ldi->filled_in_this_block ) + err = ZIP_ERRNO; + + size_centraldir += ldi->filled_in_this_block; + ldi = ldi->next_datablock; + } + } + free_datablock(zi->central_dir.first_block); + + if (err==ZIP_OK) /* Magic End */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4); + + if (err==ZIP_OK) /* number of this disk */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + + if (err==ZIP_OK) /* total number of entries in the central dir */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + + if (err==ZIP_OK) /* size of the central directory */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4); + + if (err==ZIP_OK) /* offset of start of central directory with respect to the + starting disk number */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream, + (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4); + + if (err==ZIP_OK) /* zipfile comment length */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2); + + if ((err==ZIP_OK) && (size_global_comment>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream, + global_comment,size_global_comment) != size_global_comment) + err = ZIP_ERRNO; + + if (ZCLOSE(zi->z_filefunc,zi->filestream) != 0) + if (err == ZIP_OK) + err = ZIP_ERRNO; + +#ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(zi->globalcomment); +#endif + TRYFREE(zi); + + return err; +} diff --git a/harbour/contrib/hbzlib/zip.h b/harbour/contrib/hbzlib/zip.h new file mode 100644 index 0000000000..acacce83b9 --- /dev/null +++ b/harbour/contrib/hbzlib/zip.h @@ -0,0 +1,235 @@ +/* zip.h -- IO for compress .zip files using zlib + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + This unzip package allow creates .ZIP file, compatible with PKZip 2.04g + WinZip, InfoZip tools and compatible. + Multi volume ZipFile (span) are not supported. + Encryption compatible with pkzip 2.04g only supported + Old compressions used by old PKZip 1.x are not supported + + For uncompress .zip file, look at unzip.h + + + I WAIT FEEDBACK at mail info@winimage.com + Visit also http://www.winimage.com/zLibDll/unzip.html for evolution + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + +*/ + +/* for more info about .ZIP format, see + http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip + http://www.info-zip.org/pub/infozip/doc/ + PkWare has also a specification at : + ftp://ftp.pkware.com/probdesc.zip +*/ + +#ifndef _zip_H +#define _zip_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#if defined(STRICTZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagzipFile__ { int unused; } zipFile__; +typedef zipFile__ *zipFile; +#else +typedef voidp zipFile; +#endif + +#define ZIP_OK (0) +#define ZIP_EOF (0) +#define ZIP_ERRNO (Z_ERRNO) +#define ZIP_PARAMERROR (-102) +#define ZIP_BADZIPFILE (-103) +#define ZIP_INTERNALERROR (-104) + +#ifndef DEF_MEM_LEVEL +# if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +# else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +# endif +#endif +/* default memLevel */ + +/* tm_zip contain date/time info */ +typedef struct tm_zip_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_zip; + +typedef struct +{ + tm_zip tmz_date; /* date in understandable format */ + uLong dosDate; /* if dos_date == 0, tmu_date is used */ +/* uLong flag; */ /* general purpose bit flag 2 bytes */ + + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ +} zip_fileinfo; + +typedef const char* zipcharpc; + + +#define APPEND_STATUS_CREATE (0) +#define APPEND_STATUS_CREATEAFTER (1) +#define APPEND_STATUS_ADDINZIP (2) + +extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append)); +/* + Create a zipfile. + pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on + an Unix computer "zlib/zlib113.zip". + if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip + will be created at the end of the file. + (useful if the file contain a self extractor code) + if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will + add files in existing zip (be sure you don't add file that doesn't exist) + If the zipfile cannot be opened, the return value is NULL. + Else, the return value is a zipFile Handle, usable with other function + of this zip package. +*/ + +/* Note : there is no delete function into a zipfile. + If you want delete file into a zipfile, you must open a zipfile, and create another + Of couse, you can use RAW reading and writing to copy the file you did not want delte +*/ + +extern zipFile ZEXPORT zipOpen2 OF((const char *pathname, + int append, + zipcharpc* globalcomment, + zlib_filefunc_def* pzlib_filefunc_def)); + +extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level)); +/* + Open a file in the ZIP for writing. + filename : the filename in zip (if NULL, '-' without quote will be used + *zipfi contain supplemental information + if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local + contains the extrafield data the the local header + if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global + contains the extrafield data the the local header + if comment != NULL, comment contain the comment string + method contain the compression method (0 for store, Z_DEFLATED for deflate) + level contain the level of compression (can be Z_DEFAULT_COMPRESSION) +*/ + + +extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw)); + +/* + Same than zipOpenNewFileInZip, except if raw=1, we write raw file + */ + +extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCtypting)); + +/* + Same than zipOpenNewFileInZip2, except + windowBits,memLevel,,strategy : see parameter strategy in deflateInit2 + password : crypting password (NULL for no crypting) + crcForCtypting : crc of file to compress (needed for crypting) + */ + + +extern int ZEXPORT zipWriteInFileInZip OF((zipFile file, + const void* buf, + unsigned len)); +/* + Write data in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZip OF((zipFile file)); +/* + Close the current file in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file, + uLong uncompressed_size, + uLong crc32)); +/* + Close the current file in the zipfile, for fiel opened with + parameter raw=1 in zipOpenNewFileInZip2 + uncompressed_size and crc32 are value for the uncompressed size +*/ + +extern int ZEXPORT zipClose OF((zipFile file, + const char* global_comment)); +/* + Close the zipfile +*/ + +#ifdef __cplusplus +} +#endif + +#endif /* _zip_H */ diff --git a/harbour/contrib/hbzlib/zlib.h b/harbour/contrib/hbzlib/zlib.h new file mode 100644 index 0000000000..022817927c --- /dev/null +++ b/harbour/contrib/hbzlib/zlib.h @@ -0,0 +1,1357 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.3, July 18th, 2005 + + Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.3" +#define ZLIB_VERNUM 0x1230 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip streams in memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumualte before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + the value returned by deflateBound (see below). If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not + fatal, and deflate() can be called again with more input and more output + space to continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, + Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() stop + if and when it gets to the next deflate block boundary. When decoding the + zlib or gzip format, this will cause inflate() to return immediately after + the header and before the first block. When doing a raw inflate, inflate() + will go ahead and process the first block, and will return when it gets to + the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 + if inflate() is currently decoding the last block in the deflate stream, + plus 128 if inflate() returned immediately after decoding an end-of-block + code or decoding the complete header up to just before the first byte of the + deflate stream. The end-of-block will not be indicated until all of the + uncompressed data from that block has been written to strm->next_out. The + number of unused bits may in general be greater than seven, except when + bit 7 of data_type is set, in which case the number of unused bits will be + less than eight. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster approach + may be used for the single inflate() call. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the only effect of the flush parameter in this implementation + is on the return value of inflate(), as noted below, or when it returns early + because Z_BLOCK is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the adler32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the adler32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() will decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically. Any information + contained in the gzip header is not retained, so applications that need that + information should instead use raw inflate, see inflateInit2() below, or + inflateBack() and perform their own processing of the gzip header and + trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may then + call inflateSync() to look for a good compression block if a partial recovery + of the data is desired. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute an adler32 check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), + no header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as + Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy + parameter only affects the compression ratio but not the correctness of the + compressed output even if it is not set appropriately. Z_FIXED prevents the + use of dynamic Huffman codes, allowing for a simpler decoder for special + applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. In addition, the + current implementation of deflate will use at most the window size minus + 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + adler32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() + or deflateInit2(). This would be used to allocate an output buffer + for deflation in a single pass, and so would be called before deflate(). +*/ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the + bits leftover from a previous deflate stream when appending to it. As such, + this function can only be used for raw deflate, and must be used before the + first deflate() call after a deflateInit2() or deflateReset(). bits must be + less than or equal to 16, and that many of the least significant bits of + value will be inserted in the output. + + deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an adler32 or a crc32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is + a crc32 instead of an adler32. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg + is set to null if there is no error message. inflateInit2 does not perform + any decompression apart from reading the zlib header if present: this will + be done by inflate(). (So next_in and avail_in may be modified, but next_out + and avail_out are unchanged.) +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called + immediately after inflateInit2() or inflateReset() and before any call of + inflate() to set the dictionary. The application must insure that the + dictionary that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK can be used to + force inflate() to return immediately after header processing is complete + and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When + any of extra, name, or comment are not Z_NULL and the respective field is + not present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the paramaters are invalid, Z_MEM_ERROR if the internal state could not + be allocated, or Z_VERSION_ERROR if the version of the library does not + match the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is more efficient than inflate() for + file i/o applications in that it avoids copying between the output and the + sliding window by simply making the window itself the output buffer. This + function trusts the application to not change the output buffer passed by + the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free + the allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects + only the raw deflate stream to decompress. This is different from the + normal behavior of inflate(), which expects either a zlib or gzip header and + trailer around the deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero--buf is ignored in that + case--and inflateBack() will return a buffer error. inflateBack() will call + out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() + should return zero on success, or non-zero on failure. If out() returns + non-zero, inflateBack() will return with an error. Neither in() nor out() + are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format + error in the deflate stream (in which case strm->msg is set to indicate the + nature of the error), or Z_STREAM_ERROR if the stream was not properly + initialized. In the case of Z_BUF_ERROR, an input or output error can be + distinguished using strm->next_in which will be Z_NULL only if in() returned + an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to + out() returning non-zero. (in() will always be called before out(), so + strm->next_in is assured to be defined if out() returns non-zero.) Note + that inflateBack() cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least the value returned + by compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before + a compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. +*/ + + +typedef voidp gzFile; + +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h", or 'R' for run-length encoding + as in "wb1R". (See the description of deflateInit2 for more information + about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). The number of + uncompressed bytes written is limited to 4095. The caller should assure that + this limit is not exceeded. If it is exceeded, then gzprintf() will return + return an error (0) with nothing written. In this case, there may also be a + buffer overflow with unpredictable consequences, which is possible only if + zlib was compiled with the insecure functions sprintf() or vsprintf() + because the secure snprintf() or vsnprintf() functions were not available. +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read again later. + Only one character of push-back is allowed. gzungetc() returns the + character pushed, or -1 on failure. gzungetc() will fail if a + character has been pushed but not read yet, or if c is -1. The pushed + character will be discarded if the stream is repositioned with gzseek() + or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns 1 if file is being read directly without decompression, otherwise + zero. +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); +/* + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is NULL, this function returns the required initial + value for the for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + +/* + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) +#define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, sizeof(z_stream)) + + +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); +ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */