* include/hbcompdf.h
* include/hbexprb.c
* src/common/expropt1.c
* redefined all HB_ET_MACRO_* macros as bitfields
* src/compiler/complex.c
* small modification for future extensions in macro usage
* src/compiler/hbcomp.c
! replaced old temporrary hack with internal error.
* src/compiler/hbmain.c
* code reformating
* src/compiler/harbour.y
* separated DECLARE tokens
* src/compiler/harbour.yyc
* src/compiler/harbour.yyh
* regenerated
* src/rdd/dbffpt/dbffpt1.c
! fixed possible bad interaction (modified default memo type) due to
uninitialized item returned by hb_stackAllocItem(). Such items may
contain any simple value.
* src/vm/memvars.c
* minor variable name cleanup
* utils/hbtest/rt_math.prg
* repeat tests for macro messages and macro <op>=, pre/post ++/--
operations with and without pass by reference (-ks) optimization
* src/common/hbdate.c
* implemented monotonic timers in POSIX and MS-Windows builds
* config/wce/global.mk
* config/wce/mingwarm.mk
* config/win/global.mk
* utils/hbmk2/hbmk2.prg
* added winmm/mmtimer to list of system libraries - required
for timeGetTime()
* ChangeLog.txt
! typos
* src/compiler/hbgenerr.c
* changed "with object" in last error message to upper cases
* src/rdd/dbf1.c
+ added assigned value to error object ARGS array when data type or
data width error is generated inside PUTVALUE() method
* utils/hbtest/hbtest.prg
* utils/hbtest/rt_array.prg
* utils/hbtest/rt_hvma.prg
* utils/hbtest/rt_main.ch
* utils/hbtest/rt_math.prg
* utils/hbtest/rt_misc.prg
+ added support for alternative results to HBTEST code.
It's enabled by default and can be turned off by -noalt hbtest
parameter.
+ added alternative results for tests which return different then
Cl*pper results but they are expected and not Harbour bugs.
* include/hbcomp.h
* include/hbcompdf.h
* include/hberrors.h
* include/hbexprb.c
* src/common/expropt1.c
* src/compiler/hbgenerr.c
* src/compiler/hbmain.c
+ added new macros HB_ET_MACRO_NOLIST and HB_ET_MACRO_NOPARE
% use new HB_ET_MACRO_* macros
+ added new compile time error:
"Code block contains both macro and with object messages ':%s'"
NOTE: -kd compiler switch allows to compile codeblocks with macros
and declared symbols / with object messages
* replaced hb_compErrorCodeblock() with hb_compErrorCodeblockDecl() and
hb_compErrorCodeblockWith()
+ added new C function hb_compPushMacroVar()
* code simplification
; added few comments
* utils/hbtest/rt_math.prg
* extended test code for macro messages and macro <op>=, pre/post ++/--
operations
* src/vm/hvm.c
! protection against executing hb_threadStateNew() during GC pass
inside hb_vmRequestReenterExt()
* src/vm/garbage.c
! add volatile attribute to s_bCollecting variable
* small modification in hb_gcAll() parameter
* src/rtl/errsys.prg
; minor comment cleanup
* doc/xhb-diff.txt
* extended a little bit section STRONG TYPED VARIABLES
* *
% remove brandings and homepage [1] from copyright header. Pass 1 - using script.
[1] nobody has access to it anymore AFAIK - and it's also just
a redirect since long
! update url in copyright header
; this should make the diff between 3.4 and 3.2 easier to manage
* src/vm/hvm.c
* allow to use == operator for codeblocks
* utils/hbtest/rt_hvm.prg
* updated for == operator which accepts codeblocks
* utils/hbtest/rt_main.ch
* do not define __CLIPPER__ macro when ITK Clip compiler is used
* contrib/hbbz2/errint.c
* added HB_EXPORT to bz_internal_error() declaration
+ src/3rd/hbdossrl/Makefile
+ src/3rd/hbdossrl/serial.c
+ src/3rd/hbdossrl/serial.h
+ src/3rd/hbdossrl/README
+ added DOS Serial Library - it's much cleaner and simpler then COMLib
we used so far in DOS builds. It also supports hardware and software
flow control. Many thanks for Karl Stenerud for his wonderful job.
* src/rtl/hbcom.c
+ added support for DOS Serial Library used as low level backend in
Harbour DOS builds.
* config/dos/djgpp.mk
* config/dos/watcom.mk
* config/dyn.mk
* config/lib.mk
* src/3rd/Makefile
* src/Makefile
* utils/hbmk2/hbmk2.hbp
* utils/hbmk2/hbmk2.prg
* use DOS Serial Library (hbdossrl) instead of COMLib (hbpmcom)
* config/dos/watcom.mk
* config/win/watcom.mk
* config/linux/watcom.mk
! enabled -bd OpenWatcom switch for code compiled as part of dynamic
libraries
* use CauseWay as default DOS extender for dynamic DOS builds
* config/dyn.mk
* config/lib.mk
* src/Makefile
! fixed list of libraries used to create Harbour DLL in DOS builds
* config/bin.mk
* src/vm/Makefile
* create hbmainstd library for OpenWatcom DOS shared builds
* src/vm/maindllh.c
+ added DLL entry function for CauseWay DLLs in OpenWatcom builds
* src/vm/main.c
* include maindllh.c in OpenWatcom DOS shared builds
* utils/hbmk2/hbmk2.prg
+ added support for dynamic binaries in DOS OpenWatcom builds.
Support for CauseWay DLLs is still broken in current OpenWatcom
builds so it will have to wait for the fix to be usable.
* src/vm/dynlibhb.c
+ added support for dynamic libraries to OpenWatcom DOS builds.
Now it's enabled only in harbour.dll due to problems with
CW and current OW.
* src/3rd/zlib/zconf.h
* src/3rd/zlib/zlib.dif
* use OS2 patch for exporting ZLIB symbols also in DOS builds
* src/rdd/dbf1.c
* pacified warning
* utils/hbmk2/hbmk2.prg
+ Partially merge 8f16b6731 from vszakats/harbour-core:
"refined the way pkg-config queries the package version. Now
it does it in a separate call to make some pkg-config versions
happy where version query option cannot be mixed with --cflags
and similar options (f.e. pkg-config 0.28 in current homebrew)."
* src/rtl/filesys.c
* implemented hb_fsSetDevMode() only for DOS builds,
all other platforms always use O_BINARY mode
* utils/hbmk2/hbmk2.prg
! fixed EOL handling in stdout and stderr output
* src/vm/asort.c
! fixed missing nStart checking during array items reordering
* utils/hbtest/rt_array.prg
* updated Harbour specific results - I thought that someone
invested time to exactly replicate CA-Cl*pper ASort() sorting
but in fact Harbour specific resutls where hardcoded inside
HBTEST so previous code was not Cl*pper compatible in the
same way as current one.
* utils/hbmk2/hbmk2.prg
! fix header search algorithm to handle headers specified
with _absolute paths_.
This fixed the problem reported by Sergy, here:
https://groups.google.com/d/msg/harbour-users/EYT9VQ9M7jk/SPtHIxpUB1oJ
Using absolute path to refer to a headers inside source
should be avoided and not necessary given properly setup
header paths.
; merged Viktor's patch: 2015-06-23 17:50 UTC+0200 Viktor Szakats
* include/hbcompdf.h
* include/hbexprb.c
* src/common/funcid.c
* src/vm/hvm.c
% optimize Array() function by replacing function call with HB_P_ARRAYDIM
PCODE. Because this optimization changes RTE and interacts with broken
code like
aVal := Array( 10, 0, "A" )
then it's not enabled by default. User can enable it by -ko switch.
* utils/hbtest/rt_array.prg
* use #pragma -ko- to for tests which interacts with above modification
* src/rtl/hbproces.c
% optimize memory allocation for redirected STDOUT and STDERR buffers in
hb_processRun() function.
The previous implementation was extremly inneficient when
hb_processRun() was used to extract very long output from
child process.
* src/rtl/hbtoken.c
+ added support for dividing text into lines using EOLs used by different
platform. To enable it it's enough to specify .T. as delimiter.
* src/rtl/filesys.c
* pacified MSVC warning - in fact this modification is significant only
for bugy code which changes current directory in MT programs. It's bug
on all platforms using current directory as process not thread
attribute (common behavior).
* include/inkey.ch
* src/rtl/hbgtcore.c
+ added new extended keycodes:
HB_K_TERMINATE
HB_K_MENU
* contrib/gtqtc/gtqtc1.cpp
+ center and rescale to console window dimension keeping aspect size ratio
picture passed to HB_GTI_DISPIMAGE when second parameter is .T.
+ added support for HB_K_MENU key
! fixed dynamic font size modification in fullscreen, maximized and
HB_GTI_RESIZEMODE_ROWS modes
* include/hbrddcdx.h
* src/rdd/dbfcdx/dbfcdx1.c
* added support for user defined index page size in DBFCDX.
To change page size for newly created index it's enough to call:
hb_rddInfo( RDDI_INDEXPAGESIZE, <nNewSize>,, "DBFCDX" )
DBFCDX accepts page sizes which are power of 2 in from 512 to 8192.
The upper range is my personal decision and can be easy changed
in Harbour source code. 512 is default CDX index page size and
only such indexes can be read by other RDDs.
In some cases bigger pages can increase performance and reduce
index size. In local networks probably 1024 should give optimal
performance because can be transferred in single ethernet frame.
Just make a tests.
; In next step I plan to add support for longer index keys when
bigger pages are used.
* utils/hbmk2/hbmk2.prg
! added -stop fix borrowed from Viktor's branch
* config/win/msvc.mk
* utils/hbmk2/hbmk2.prg
* disabled -nologo option used with resource compiler in MSVC builds.
Compiler version is not enough to detect supported parameters when
Platform SDK rc.exe is used.
* extras/gtwvw/gtwvwd.c
! fixed typo in WVW_SETICON() - thanks to Ash
* src/rdd/dbcmd53.c
! typo in comment
* src/rtl/dateshb.c
% use hb_retclen() instead of hb_retc() when size is well known.
* src/rtl/valtoexp.prg
% use hb_defaultValue()
* src/vm/estack.c
* minor cleanup
* src/vm/fm.c
* modified a little bit HB_MEMINFO structure to force strict alignment
+ added debug code covered by HB_FM_FORCE_REALLOC macro which forces
allocateing new block in each hb_xrealloc() call
! protect realloc() in HB_FM_STATISTIC by mutex, it fixes issue #77.
* src/rtl/hbproces.c
% unlock HVM waiting for process in OS2 builds
! build array of argument passed to process in hb_processRun() in
parent process not forked one. It fixes possible deadlock in forked
process because memory is allocated to create arguments array and
in MT program memory managers may use mutexes internally which can
be cloned to forked process in locked state.
It fixes seldom and random HBMK2 freezing during compilation
with -jobs=<n> parameter.
* utils/hbmk2/hbmk2.prg
! fixed race condition in concurrent C compiler execution (-jobs=<n>)
with script file
* src/debug/dbgentry.c
! fixed crash when wrong expression is used as tracepoint
! fixed expression analyzer to correctly recognized extended strings e"..."
* formatting
* src/debug/dbgbrwsr.prg
* src/debug/dbghelp.prg
* src/debug/dbgtarr.prg
* src/debug/dbgthsh.prg
* src/debug/dbgtinp.prg
* src/debug/dbgtmenu.prg
* src/debug/dbgtobj.prg
* src/debug/dbgtwin.prg
* src/debug/dbgwa.prg
* src/debug/debugger.prg
* added calls to ::NotSupported() method for some still missing
functionality
! do not use SetColor() but directly pass colors to used objects
and functions
! do not use SetPos() and Row()/Col() for core functionality - it was
source of few minor bugs
% enable cursor only in input objects and disable it just after
% eliminated code to save and restore cursor position and shape
! fixed initial positioning in help window
+ implemented HiLite() and DeHiLite() methods in HBDbBrowser() class
! fixed positioning when end of source data is reached in browser
% eliminated some redundant or completely useless code and comments
% use some fully functional HBDbBrowser() features instead of manual
encoding similar functionality
! validate watchpoint and tracepoint expressions
% use SWITCH statements
! fixed expression presentation (added __dbgValToExp() and __dbgValToStr())
! fixed input for new expressions
! fixed browser scrolling in object inspector
! fixed inkey() processing inside debugger (ALT+D and ALT+C)
! fixed browsers highliting in WA inspector
! fixed hardcoded limit for 512 workareas in WA inspector
! fixed initial WA positioning in WA inspector
* resized WA inspector window
* many other minor fixes and improvements
* src/vm/set.c
! fixed freed memory access exploited by interactions between
modifications in last few years.
! do not try to remove trailing ^Z char reading from the stream
if FS_END seek reports 0.
! if possible open printer/alternate/extra output in write only mode
to avoid problem on devices where read access is not available.
* src/rtl/langapi.c
* keep EN lang active after deinitialization
* src/rtl/filesys.c
! fixed condition for file time refresh in *nix builds
! fixed file time setting in *nix builds
* include/hbapifs.h
* src/rtl/Makefile
* src/rtl/filebuf.c
+ src/rtl/filebufd.c
* renamed hb_fileRegister2() to hb_fileRegisterFull()
+ added new function hb_fileRegisterPart() which simplifies writing
small FILE IO redirectors.
* contrib/hbmemio/memio.c
* contrib/hbnetio/netiocli.c
* use hb_fileRegisterFull()
* contrib/hbplist.txt
+ contrib/hbtcpio/hbtcpio.hbc
+ contrib/hbtcpio/hbtcpio.hbp
+ contrib/hbtcpio/hbtcpio.hbx
+ contrib/hbtcpio/tcpio.c
+ added new Harbour FILE IO redirector.
It recognizes and process names with "tcp:" prefix, in form like:
tcp:<host>:<port>[:<timeout>]
It can be used in different subsystems using Harbour FILE IO and
stream read/write operations, i.e.
REQUEST HB_TCPIO
SET PRINTER TO tcp:192.168.0.110:9100
can be used to connect to network printers using TCP direct printing.
* utils/hbmk2/po/hbmk2.pt_BR.po
! fixed typo in translation
* src/rtl/hbproces.c
! do not use SetHandleInformation() in WinCE builds
* config/wce/global.mk
* utils/hbmk2/hbmk2.prg
! added iphlpapi to WinCE builds
* config/win/global.mk
* utils/hbmk2/hbmk2.prg
* src/rtl/hbsocket.c
+ added support for returning NIC MAC address by hb_socketGetIFaces()
in MS-Windows builds.
To see physical device addresses bound with active IP interfaces use:
#include "hbsocket.ch"
PROCEDURE Main()
LOCAL aIFace
FOR EACH aIFace IN hb_socketGetIFaces( , .t. )
? "IP:", aIFace[ HB_SOCKET_IFINFO_ADDR ], ;
" MAC:", aIFace[ HB_SOCKET_IFINFO_HWADDR ]
NEXT
WAIT
RETURN
* src/rtl/fstemp.c
! fixed casting for DOS C++ builds
* config/dos/watcom.mk
! moved CRTL library to the end of linked library list - some
other libraries may overload some C RTL functions or symbols,
f.e. error descriptions in WATT-32
* utils/hbmk2/hbmk2.prg
! added hbpmcom library to linked library list in DOS builds
! fixed WATT-32 support in DOS builds to work in cross compilation
environment
! link WATT-32 library before C RTL
! fixed simultaneous compilation with -jobs=N when N >= 2
The same hash array (hReplace) was shared between different threads
and each thread tried to modify it overloading their own parameters.
It was causing different side effects, i.e. all threads compiled
the same .c file instead of their own ones or HBMK2 was crashing
due to memory corruption.
* always join all started threads
* utils/hbmk2/hbmk2.prg
! reverted 2nd hunk of 2013-06-03 16:45 UTC+0200. It
introduced unnecessary and confusing disparity between
command-line and .hbp/.hbm while they are supposed to
be working similarly. It also breaks syntax supported
in .hbc directives, and it also makes behavior contracting
with the way documented in hbmk2 help and hbmk2 examples.
All this, to resolve the problem of space containing option
values for one specific and rare subcase of reverted apostrophs.
To pass option/directive value containing a space, put
the whole option (or the option value) in double quotes
(as documented in help), this works equally well on the
command line and in .hbp/.hbm/.hbc files.
* ChangeLog.txt
! ending whitespaces
! explicitly filled git $Id
* src/rtl/hbtoken.c
+ added support for passing token parser parameters as bit field number.
The goal is to replace last to parameters with single bit field which
allows to set many different parsing aspects instead of adding many
new parameters.
+ added support for reverted apostrophes quoting: `a b c`
; TODO: add constant values to control parser in token functions
* utils/hbmk2/hbmk2.prg
! respect reverted apostrophes quoting in options read from .hbp/.hbm
files.
! do not ignore tool parameters passed in -*flags= hbmk2 params if
they do not start with '-'. It resolves problems with shells which
need special quoting to pass parameters, i.e. with both modifications
it's possible to use in hbp files dynamic parameters encapsulated in
different forms, depending on used platform, shell and parameter type,
i.e. parameters are passed as set of separated arguments:
-cflag=`config-tool1`
or paramters are passed as single argument:
-cflag="`config-tool2`"
or parameters are passed in file which name shows config-tool3:
-cflag="@`config-tool3`"
In short words now things like:
-cflag=`pkg-config --cflags gtk+-3.0`
will work correctly with .hbp files
* src/pp/hbpp.c
! fixed ChangeLog file name detection broken after adding .txt
extension.
* src/rtl/hbproces.c
+ added support merged stdout and stderr output in hb_fsProcessRun()
* src/rtl/hbprocfn.c
+ added support merged stdout and stderr output in hb_processRun()
PRG function. To extract merged stdin and stdout application output
it's enough to pass by reference in 3-rd and 4-th parameters the same
variable, i.e.:
nResult := hb_processRun( cCommand,, @cOutErr, @cOutErr )
* utils/hbmk2/hbmk2.prg
! use hb_processRun() intead of hb_processOpen() to extract merged
stdout and stderr output. It fixes all builds in which hb_processOpen()
does not exists due to some system limitations like missing pipes,
i.e. DOS builds.
* src/vm/fm.c
! fixed typo in DOS builds
* src/rtl/gtwin/gtwin.c
! ignore mouse position reported in mouse wheel events which use
screen based coordinates instead of console window ones.
* bin/check.hb
* bin/commit.hb
! added executable attribute
* doc/xhb-diff.txt
! xBase++ -> Xbase++, Harbor -> Harbour
* utils/hbmk2/hbmk2.prg
+ show project name in error messages
! applied Viktor fixes:
2013-04-17 03:45 UTC+0200 Viktor Szakats (harbour syenar.net)
! fixed to not leave temp .lnk file on disk with -hbdyn[vm]
targets in win/gcc compiler family
! fixed win/tcc to not use gcc style .lnk files when creating
-hbdyn[vm] targets
! added workaround for linker stderr messages redirected to stdout.
It's not perfect but for sure much better then previous behavior.
Now recently created problems like broken *nix builds can be well
seen in stderr output.
* bin/check.hb
! made it work regardless of cwd
+ added --fixup option to fix/process files
+ extended detection of SVN IDs based on 'ident' option
in .gitattributes. Now also warn if missing.
+ added detection of C++ style comments in C files
+ ported Harbour function name casing fixup code, so
it can now be done automatically before commit
* bin/commit.hb
* minor change in option name
* contrib/gtwvg/wvgwin.c
* contrib/gtwvg/wvgwing.c
! deleted large amount of MSDN documentation in C++ comments
! fixed C++ comments
* src/pp/ppcore.c
* avoid false C++ comment detection in deffed out
non-code section
* src/rtl/gttrm/gttrm.c
* contrib/rddads/adsx.c
* contrib/xhb/filestat.c
! fixed C++ comment
* contrib/hbrun/hbrun.hbp
* utils/hbmk2/hbmk2.hbp
+ better comment
* extras/gtwvw/hbgtwvw.h
* extras/gtwvw/*.c
! fixed C++ comments
* bin/check.hb
! fixed to use local implementation instead of hb_DirScan()
which has known bug of missing extensionless files on win.
(due to hb_FileMatch() problem)
+ added support to optimize images and uncrustify C source
before upload (inactive yet)
+ added necessary exceptions now that extensionless files
properly found
+ checks for filenames without extensions
+ checks for filenames with extensions not in .gitattributes
* bin/commit.hb
+ show helpful advice when pre-commit hook check fails
! fixed to propely pick filenames that result from rename operations (for check)
! fixed to not pick filenames of deleted files (for check)
* config/lang.hb
* doc/en/lang.txt
* include/hblang.hbx
* src/lang/Makefile
* src/lang/l_zh_tra.c -> src/lang/l_zh.c
* src/rtl/langcomp.prg
* Language renamed: zh_tra -> zh (in sync with recently laid rules)
The 'REQUEST HB_LANG_*' value become INCOMPATIBLE compared
to previous dev versions
* src/rtl/cdpdet.prg
+ added 'zh' country code to codepage detection
* contrib/make.hb
* contrib/hbplist -> contrib/hbplist.txt
* renamed to have an extension
* contrib/hbrun/doc/_GENERATED_ -> contrib/hbrun/doc/_autogen.txt
* utils/hbmk2/doc/_GENERATED_ -> utils/hbmk2/doc/_autogen.txt
* renamed to have names fitting naming rules
+ added warning message inside
- extras/httpsrv/logs/empty
- deleted unnecessary file with non-compliant filename
- tests/stripeol.hb
% deleted, now similar functionality is implemented in bin/check.hb
* .gitattributes
! added missing .log and .ucf
* contrib/hbtinymt/3rd/tinymt/tinymt.hbp
! deleted SVN ID
* debian/copyright
! synced with COPYING.txt
* debian/postinst
* debian/postrm
! deleted multiple EOL at EOF
* config/lang.hb
* utils/hbmk2/hbmk2.hbp
* contrib/hbrun/doc/hbrun.es_ES.md -> contrib/hbrun/doc/hbrun.es.md
* utils/hbmk2/doc/hbmk2.es_ES.md -> utils/hbmk2/doc/hbmk2.es.md
* utils/hbmk2/po/hbmk2.es_ES.po -> utils/hbmk2/po/hbmk2.es.po
* 'es_ES' -> 'es'
; General rule is to support the "root" language and any number
of additional dialects, f.e. 'es'+'es_419', 'pt'+'pt_BR', 'fr').
(as opposed to dialects only, f.e. 'es_ES'+'es_419', 'pt_PT'+'pt_BR', 'fr_FR')
* bin/commit.hb
+ added code to launch default git editor with ChangeLog.txt
(not yet activated)
* contrib/hbexpat/hbexpat.hbc
- reverted these two:
2013-04-03 16:01 UTC+0200
2013-03-27 16:29 UTC+0100
It seems that expat.hbc is always installed regardless
of local or system copy is used along the build/install
process
* utils/hbmk2/hbmk2.prg
! fixed -run on Darwin after 2013-03-15 13:57 UTC+0100
(untested)
* bin/check.hb
! fixed shrinking of ChangeLog.txt to not result in broken EOLs
! refinements around interactions of EOL checks and fixes
! include Harbour files "hidden" under /3rd/ dirs
* bin/commit.hb
+ set errorlevel, so it can now be used as a git pre-commit hook
(as 'exec hbrun bin/commit' in .gits/hooks/pre-commit)
* contrib/hbexpat/hbexpat.hbc
! fixed expat.hbc detection to actually look for .hbc file not .h
(which is never present)
* utils/hbmk2/hbmk2.prg
+ added depfinish= .hbc directive. It was missing, yet I
was using it in hbexpat.hbc in recent patch, and wondered
why it didn't work
[ the necessity of the whole previous patch is still suspect
though. ]
+ show warning for any .hbc directives that is unknown.
This should avoid above situation nicely.
INCOMPATIBILITY: Thus far all lines with unknown directives
were ignored, now only empty ones or ones that begin with
'#' character (in first column), as documented. Clean your
.hbc files accordingly.
! fixed typo in one help text. Pls retranslate, I hope Transifex
keeps previous texts, but you can find it in next language
update commit, if not.
* package/harb_win.mft
! deleted BOM (detected by check.hb)
* contrib/3rd/sqlite3/sqlite3.hbc
* contrib/3rd/sqlite3/sqlite3.hbp
* contrib/hbbz2/3rd/bz2/bz2.hbc
* contrib/hbbz2/3rd/bz2/bz2.hbp
* contrib/hbexpat/3rd/expat/_hbconf.h
* contrib/hbexpat/3rd/expat/expat.hbc
* contrib/hbexpat/3rd/expat/expat.hbp
* contrib/hbhpdf/3rd/libhpdf/_hbhbpdf.c
* contrib/hbhpdf/3rd/libhpdf/libhpdf.hbc
* contrib/hbhpdf/3rd/libhpdf/libhpdf.hbp
* contrib/hblzf/3rd/liblzf/lzf.hbc
* contrib/hblzf/3rd/liblzf/lzf.hbp
* contrib/hbmlzo/3rd/minilzo/minilzo.hbc
* contrib/hbmlzo/3rd/minilzo/minilzo.hbp
* contrib/hbmxml/3rd/minixml/config.h
* contrib/hbmxml/3rd/minixml/minixml.dif
* contrib/hbmxml/3rd/minixml/mxml.hbc
* contrib/hbmxml/3rd/minixml/mxml.hbp
* contrib/hbmzip/3rd/minizip/minizip.hbc
* contrib/hbmzip/3rd/minizip/minizip.hbp
* contrib/hbxdiff/3rd/libxdiff/_hbconf.h
* contrib/hbxdiff/3rd/libxdiff/xdiff.hbc
* contrib/hbxdiff/3rd/libxdiff/xdiff.hbp
* lib/3rd/win/bcc/Makefile
* lib/3rd/win/mingw/Makefile
! deleted SVN IDs
* rediffed where required
