* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/hbdate.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/rtl/abs.c
* harbour/source/rtl/at.c
* harbour/source/rtl/chrasc.c
* harbour/source/rtl/datec.c
* harbour/source/rtl/dateshb.c
* harbour/source/rtl/diskspac.c
* harbour/source/rtl/disksphb.c
* harbour/source/rtl/gtfunc.c
* harbour/source/rtl/left.c
* harbour/source/rtl/len.c
* harbour/source/rtl/math.c
* harbour/source/rtl/minmax.c
* harbour/source/rtl/mod.c
* harbour/source/rtl/philes.c
* harbour/source/rtl/philesx.c
* harbour/source/rtl/replic.c
* harbour/source/rtl/round.c
* harbour/source/rtl/set.c
* harbour/source/rtl/space.c
* harbour/source/rtl/strcase.c
* harbour/source/rtl/strpeek.c
* harbour/source/rtl/transfrm.c
* harbour/source/rtl/trim.c
* harbour/source/rtl/type.c
* harbour/source/rtl/val.c
* harbour/source/rtl/word.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* added some PCODEs to cover all possible combination of ++, --, <op>=
operations in the same way and keep Clipper compatible RT errors.
* added some other PCODEs to optimize some commonly used expressions/
statements
* use HB_ERR_ARGS_BASEPARAMS instead of hb_paramError()
* some other cleanups and minor optimizations
* harbour/utils/hbtest/rt_math.prg
* update expected result for MOD() - it was not Clipper compatible and
it will be hard to make it compatible without introducing some Clipper's
side effects
* harbour/contrib/libct/ctc.c
* harbour/contrib/libct/files.c
* harbour/contrib/libnf/ftattr.c
* harbour/contrib/libnf/n2color.c
* cleaned some BCC warnings
* harbour/include/hbapi.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbsetup.ch
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/common/hbver.c
* harbour/source/common/hbverdsp.c
* harbour/source/compiler/hbcomp.c
* harbour/source/vm/arrays.c
* harbour/source/vm/arrayshb.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/hvm.c
! fixed Harbour support for accessing string characters with array
index operators []
+ added support for #define HB_COMPAT_XHB - it's disabled by default.
When set it enables some of xHarbour features like negative array
indexes calculated from tail, accessing string characters with []
operators (warning it's not compatible with default Harbour version
enabled by -ks during compilation and //flags:s at runtime - in
xHarbour compatibility mode "ABC"[2] returns "B" when in Harbour 66)
and some other minor features.
* harbour/source/compiler/cmdcheck.c
* added support for optional setting C output type in -go switch
Now it accepts optional digit [0123] after -go in the same way
as -gc, f.e.: -go3
* harbour/source/compiler/harbour.c
* call hb_compExprLstDealloc() only when errors appeared during
compilation - it disable automatic freeing all allocated expressions
in clean compilation. I make it intentionally for easier detecting
problems one some expressions are not freed. So far the final cleanup
code always deallocated expressions what can hide some real bugs.
* harbour/source/vm/hvm.c
! fixed very serious bug in HVM closing. The s_uiActionRequest flag
was not cleared before hb_rddShutDown() so when RDD buffers were
hot and flushing required some PCODE evaluation (f.e. index KEY
or FOR expression) then they were not properly evaluated.
* harbour/source/vm/macro.c
* minor improvement
* harbour/utils/hbtest/rt_misc.prg
! fixed one of expected result, it was neither Harbour nor Clipper
result (I've just made some test with Clipper), I do not know why
it existed
* harbour/config/w32/bcc32.cf
* cleanup
+ harbour/config/w32/xcc.cf
+ added XCC support
* harbour/contrib/btree/hb_btree.c
* use hb_vmAtInit()/hb_vmAtExit() instead of INIT/EXIT functions defined
from C code
* harbour/contrib/libct/tab.c
* casting
* harbour/contrib/odbc/odbc.c
! removed #include <malloc.h> - it should not be used with new C
compilers
I think that we should replace this library with hbodbc from xHarbour.
* harbour/contrib/ole/ole2.c
* updated for XCC
* harbour/include/hbdefs.h
* include stdint.h if available
* harbour/source/compiler/complex.c
! fixed yet another stupid mistake in WITHOBJECT token
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/hvm.c
+ added HB_P_SWAP <n> PCODE
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
! fixed GPF during compilation of @:var, @:&var, @o:&var
+ added support for @o:&var and @:var, @:&var inside WITH OBJECT
statement
* changed PCODE generated of ++,--,+=,-=,...
Now left side expression is evaluated _ONLY_ once and when object
messages are used it's guarantied that exactly the same object
variable will be used. It also fixes some problems which exists
in Clipper. This optimization is enabled by -kh flag (by default)
and can be disabled with -kc.
% optimize ald macros in ++,--,+=,-=,... operations
* add automatically "_" prefix when macro message is used in assignment
context, f.e.:
s:="osCode"
o:=errorNew()
? o:&s
o:&s := 100
? ++o:&s
? o:&s *= 5
* harbour/include/hblang.ch
- removed #xtranslate - this file is included by C code and some C
compiler do not like unknown directives
* harbour/utils/hbtest/rt_math.prg
+ added test code for <op>assign and (pre/post)(inc/dec)rementation,
macro messages and WITH OBJECT
* harbour/source/compiler/harbour.c
* harbour/source/rdd/dbf1.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* casting and warning cleanup
* harbour/utils/Makefile
+ added $(HB_UTILS)
- harbour/utils/hbpp/hbpp.h
+ harbour/utils/hbpp/hbppdef.h
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/hbpptbl.c
* harbour/utils/hbpp/pragma.c
* renamed hbpp.h to hbppdef.h to avoid possible conflict with hbpp.h
in include directory
* casting and warning cleanup
* harbour/include/hbapi.h
+ added
void * pLex;
member to HB_MACRO structure - it will be necessary for MT safe
macro parser
* harbour/include/set.ch
* harbour/include/hbexprb.c
* harbour/source/macro/macro.l
* harbour/source/macro/macro.y
* indenting, formatting and converting tabs to spaces
* harbour/include/hbpp.h
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/ppgen.c
* harbour/source/pp/pplib.c
* make HB_PP_TOKEN structure public for other code and changed
public PP API to not force including static rules by programs
which does not need them.
+ added basic API for using PP as lexer
* divided HB_PP_TOKEN_MACRO to HB_PP_TOKEN_MACROVAR and
HB_PP_TOKEN_MACROTEXT and mark
[<keyword>][&<keyword>[.[<nextidchars>]]]+
as HB_PP_TOKEN_MACROTEXT not pair HB_PP_TOKEN_KEYWORD and
HB_PP_TOKEN_MACRO
It allows easier integration PP as (macro)compiler lexer and
fixes preprocessing [<keyword>][&<keyword>[.[<nextidchars>]]]+
in some patterns.
* harbour/utils/hbtest/Makefile
+ added PP library to linked library list
* harbour/source/macro/macro.y
+ added seaport to use PP as lexer. It's disabled by default and
can be enabled using by defining HB_PP_MACROLEX. It eliminates
using FLEX or SIMPLEX lexer in macro compiler. Now it emulates
the behavior of FLEX lexer because I wanted to minimize the
modification but in fact because parsed token are freed when
macro compiler finish its job then we can resolve RT memory
leaks which apear during parsing wrong expressions. It will be
enough to drop allocating memory for new terminal symbols and
using them as is like in compiler. It will also quite nice
simplify include/hbexpr*.c code and will allow to move some
functions to COMMON library. I want to make also pure compiler
code MT safe so I will have to add passing pointer to a structure
with compiler context just like in macro compiler. It means that
if we define a structure which will be common to compiler and macro
compiler with local (not common) data stored in other structure for
which will will keep only a pointer then we will be able to move most
of include/hbexpr*.c code to common library. But I do not want to
make farther modification without consultation without Ryszard.
Also to make PP default lexer some farther modifications should
be done in core PP code and include/hbexpr*.c files to not reduce
the speed. Now using HB_PP_MACROLEX for sure will have to cause
speed reduction in macro compiler. But if we make necessary
modifications then we should keep at least the same speed or
probably reach noticeable better results.
* harbour/include/hbclass.ch
* most of the rules rewritten
! fixed some wrong rules and general cleanup
+ added additional code validation
! fixed compilation of more then one class in single file.
Now it's even possible to declare all classes at beginning of
single file and then implementing their methods in any order
! fixed using static classes and classes
! fixed compilation without <ClassName>_ prefix in method names
+ added support for HB_CLS_NO_DECORATION macro which disable
adding <ClassName>_ prefix to method names - this macro is
set by default when HB_SHORTNAMES is set.
+ added support for declared parameters validation - it can be
disabled with HB_CLS_NO_PARAMS_ERR and I had to disable it
by default due to problems with our preprocessor.
Ryszard seems that our PP has serious problems with decoding
directives when there is no space between symbol and some other
non symbol character. I had to add some workarounds and even
introduce buggy rules to make it working. Please look at it.
You can remove #define HB_CLS_NO_PARAMS_ERR from hbclass.ch
and try to rebuild Harbour core code to see the problem.
* harbour/include/hboo.ch
* harbour/source/vm/classes.c
+ added support for new primitive message: HB_OO_MSG_PERFORM
* harbour/source/rtl/tclass.prg
- removed <lPersistent> parameter from HBClass messages and
internals data. Persistent is supported as scope bit and
separate variable was redundant.
- removed stripping of () from message names. Here is not a place
to fix wrong preprocessor rules.
* harbour/utils/hbtest/rt_class.prg
* use: METHOD PROCEDURE ... CALSS ...
instead of: PROCEDURE ... CALSS ...
The first version is preferable syntax.
* harbour/source/debug/dbgtmenu.prg
* harbour/source/rtl/checkbox.prg
! fixed some parameters in method declaration - global cleanup
will have to wait for preprocessor fixes
Hi all,
Please make test with current hbclass.ch code.
I hope that I haven't broken too much things ;-) but I rewrite
from scratch most rules and it's possible that I missed sth or
made some stupid typos. Current version is much shorter and should
be easier to updated. For sure I've intentionally changed one thing.
CLASSDATA was ignoring SHARED attribute and always created shared
class variables. Seems that it was long existing typo but the fix
may interact with already existing code which needs SHARED class
variables but does not use SHARED clause in CLASSDATA declaration.
In such case please update it and add missing SHARED.
Also in the end of CLASS declaration we have:
[ ; #translate Super( <SuperClassN> ): => ::<SuperClassN>: ] ;
[ ; #translate Super( <SuperClass1> ): => ::<SuperClass1>: ] ;
[ ; #translate Super(): => ::<SuperClass1>: ] ;
[ ; #translate Super: => ::<SuperClass1>: ] ;
[ ; #translate ::Super : => ::<SuperClass1>: ]
These rules introduce very serious bug - they are breaking supercasting
in code which makes sth like:
::super:super:super:msg
or in any other code which sends SUPER message to some other class
objects. I will have to remove them. At least the last three ones.
There were some other things I wanted to write about but it's too late
and I'm to tired - sorry. If you will have any question please ask. if
you will notice some problems with current rules please inform me.
* harbour/source/vm/classes.c
+ added hb_clsRealMethodName() function which I'm using in some
test code
* harbour/tests/clsscast.prg
* updated to use __CLS_CNTSHRDATA() instead of __CLS_CNTCLSDATA()
* harbour/utils/hbtest/rt_class.prg
+ added tests for class and shared class variables/allocating
* xharbour/include/hbvm.h
* xharbour/source/vm/hvm.c
+ added hb_vmPushDynSym( PHB_DYNS )
It should allow most applications to not use [P]HB_SYMB at all.
Removing PHB_SYMB from 3-rd party .c code may allow us to add
freeing unused symbol tables from HVM in the future.
* harbour/source/vm/classes.c
* temporary restored hb_objGetpMethod()
+ added __ClsCntClasses()
! allocated real methods for OnError and Destructor to keep
the same behavior in these methods as in any others, f.e.
scoping checking or debugging.
* harbour/common.mak
* harbour/utils/hbtest/Makefile
* harbour/utils/hbtest/hbtest.prg
+ harbour/utils/hbtest/rt_class.prg
+ added tests for our classy code. Now destructors and instance
area allocating/casting. Some other in the future.
* harbour/source/rtl/errorsys.prg
! Fixed to use OutErr() instead of QOut() for CA-Cl*pper
compatibility. (Thanks Chen)
! Fixed to set ErrorLevel to 1 in case of a RT error.
(this was once removed by me as a fix about 7 years ago,
but I can't remember what was the reason. It looks to be
a wrong fix back then.)
* harbour/utils/hbtest/rt_array.prg
* Removed one codeblock unused var warning.
* harbour/include/common.ch
* harbour/source/debug/dbghelp.prg
* harbour/source/debug/dbgmenu.prg
* harbour/source/debug/dbgtarr.prg
* harbour/source/debug/dbgtobj.prg
* harbour/source/debug/dbgwa.prg
* harbour/source/debug/debugger.prg
* harbour/source/rdd/dbupdat.prg
* harbour/source/rtl/achoice.prg
* harbour/source/rtl/checkbox.prg
* harbour/source/rtl/dbedit.prg
* harbour/source/rtl/getsys.prg
* harbour/source/rtl/listbox.prg
* harbour/source/rtl/persist.prg
* harbour/source/rtl/pushbtn.prg
* harbour/source/rtl/radiobtn.prg
* harbour/source/rtl/tbcolumn.prg
* harbour/source/rtl/tbrowse.prg
* harbour/source/rtl/tclass.prg
* harbour/source/rtl/teditor.prg
* harbour/source/rtl/tget.prg
* harbour/source/rtl/tgetlist.prg
* harbour/source/rtl/tlabel.prg
* harbour/source/rtl/treport.prg
* harbour/utils/hbdoc/genchm.prg
* harbour/utils/hbdoc/genhtm.prg
* harbour/utils/hbdoc/genng.prg
* harbour/utils/hbdoc/genos2.prg
* harbour/utils/hbdoc/genrtf.prg
* harbour/utils/hbdoc/gentrf.prg
* harbour/utils/hbdoc/html.prg
* harbour/utils/hbdoc/ng.prg
* harbour/utils/hbdoc/os2.prg
* harbour/utils/hbdoc/rtf.prg
* harbour/utils/hbmake/checks.prg
* harbour/utils/hbmake/hbmake.prg
* harbour/utils/hbmake/hbmutils.prg
* harbour/utils/hbmake/radios.prg
* harbour/utils/hbtest/rt_hvm.prg
+ HB_SYMBOL_UNUSED() added for .prg code. It can suppress unused
var warnings where applicable. The code won't generate any final
pcodes, so it won't cause overhead. The only current downside
is that it cannot be used inside codeblocks.
! Fixed a number (>200) of declared but unused variable /w2 error.
All parts were scanned and fixed (except contrib).
Note that there are several false "unreachable code" warnings,
and there are still quite a few unused var warnings inside
codeblocks. After fixing these /w2 switch could be added to
the standard build process to maintain code quality.
* harbour/config/linux/dir.cf
* harbour/config/linux/gcc.cf
* formatting
* harbour/config/linux/global.cf
* harbour/config/linux/install.cf
* added -ldl to linked library list and RANLIB executing after library
creation
* harbour/contrib/ole/ole2.c
* added #include "hbapicls.h"
+ harbour/include/hbapicls.h
* harbour/include/hbapi.h
+ added HB_IT_ENUM item
+ added collect member to HB_IT_POINTER structure for POINTER items
inspected by GC
* changed the order of HB_CODEBLOCK members to safe few bytes on
alignment
* removed counters from HB_CODEBLOCK and HB_BASEARRAY structure
+ added hb_xRefInc(), hb_xRefDec(), hb_xRefFree(), hb_xRefCount(),
hb_xRefResize() functions. They are internal Harbour VM functions
and covered by internal API macro. Should not be used by 3-rd
party code because we may change them in the future or even remove.
+ added hb_gcRefInc(), hb_gcRefDec(), hb_gcRefFree(), hb_gcRefCount()
functions. These are also internal function which corresponds to the
above hb_x*() ones.
- removed hb_arrayRelease() function. This function is not longer
necessary and it should never be public function - it was implemented
in very dangerous way.
- removed hb_codeblockDelete() function.
- removed hb_memvarValueDecGarbageRef()
+ added USHORT usLen parameter to hb_codeblockMacroNew() - when sets
to non 0 value it informs that PCODE should be copied to dynamically
allocated buffer.
* moved all classes/object functions to separate file: hbapicls.h
+ added hb_retptrGC()
+ added internal function hb_memvarGetItem()
* harbour/include/hbapiitm.h
- removed hb_itemForwardValue() and added macro which translates
hb_itemForwardValue() to hb_itemMove()
+ added hb_itemUnShareString() and hb_itemReSizeString() functions
+ added hb_itemSetNil() macro
* harbour/include/hbdefs.h
* some cleanups in macro definitions
* harbour/include/hbexprb.c
* indenting
* harbour/include/hbvm.h
* harbour/include/hbinit.h
+ added hb_vmProcessSymbolsExt(), hb_vmRegisterSymbols(),
hb_vmFreeSymbols(), hb_vmBeginSymbolGroup(),
hb_vmInitSymbolGroup(), hb_vmExitSymbolGroup()
* changed hb_vmProcessSymbols() to return address of register symbol
table. For normal code it's the same address as given in parameter
so it does not break backward binary compatibility.
* changed symbol init macros to work correctly with modified address
of symbol table
* harbour/include/hbsetup.h
* added support for HB_USE_PROFILER macro. Now profiler code is
is disable in HVM by default
* commented out HB_ASORT_OPT_ITEMCOPY - it's not longer used - see note.
* harbour/include/hbstack.h
* added missing parenthesis in hb_stackItem() macro
* harbour/include/hbtypes.h
* updated VM_PROCESS_DLL_SYMBOLS definition
+ added VM_PROCESS_SYMBOLS_EXT
- removed HB_ARRAYRELEASE
* harbour/include/hbver.h
* changed revision number to 2
* harbour/include/hbvmpub.h
- remove pFunPtr from HB_DYNS and cover profiler member by
#ifndef HB_NO_PROFILER
+ added HB_PCODEFUNC structure
+ added HB_FS_PCODEFUNC, HB_FS_DYNCODE and HB_FS_LOCAL - the last one
is not used yet.
* harbour/include/hbxvm.h
* added some multipcode functions for some speed optimization in -gc3
output
* harbour/include/hbapicdp.h
* harbour/source/codepage/cpbg866.c
* harbour/source/codepage/cpbgiso.c
* harbour/source/codepage/cpbgwin.c
* harbour/source/codepage/cpeldos.c
* harbour/source/codepage/cpelwin.c
* harbour/source/codepage/cpesdos.c
* harbour/source/codepage/cpesmwi.c
* harbour/source/codepage/cpeswin.c
* harbour/source/codepage/cpgedos.c
* harbour/source/codepage/cpgewin.c
* harbour/source/codepage/cphu852.c
* harbour/source/codepage/cphuiso.c
* harbour/source/codepage/cphuwin.c
* harbour/source/codepage/cppl852.c
* harbour/source/codepage/cppliso.c
* harbour/source/codepage/cpplmaz.c
* harbour/source/codepage/cpplwin.c
* harbour/source/codepage/cppt850.c
* harbour/source/codepage/cpptiso.c
* harbour/source/codepage/cpru866.c
* harbour/source/codepage/cprukoi.c
* harbour/source/codepage/cpruwin.c
* harbour/source/codepage/cpsl437.c
* harbour/source/codepage/cpsl852.c
* harbour/source/codepage/cpsliso.c
* harbour/source/codepage/cpslwin.c
* harbour/source/codepage/cpsrwin.c
* harbour/source/common/hbfhnd.c
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
* harbour/source/compiler/gencli.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/langapi.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/rtl/gtalleg/ssf.h
* harbour/source/rtl/gtcgi/gtcgi.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
* cleaned the code to avoid warnings for some non ANSI C constructions
* harbour/source/compiler/cmdcheck.c
* formatting
* harbour/source/compiler/gencc.c
* added some multipcode optimizations
* harbour/source/compiler/genc.c
* keep function name set by compiler for static initstatics
* harbour/source/compiler/harbour.c
* extend init statics name with the number of used static variables
* formatting
* harbour/source/compiler/hbusage.c
+ added my name to developers list - I hope that there is enough
of my code in Harbour (BTW for quite long time) ;-)
* harbour/source/rdd/dbcmd.c
- removed DBF2TEXT() function
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* generate RT error when someone tries to create DBF with memo fields
without MEMO RDD linked.
* harbour/source/rtl/errorapi.c
* replace all hb_vmDo() with hb_vmSend()
* harbour/source/rtl/math.c
* use hb_errPutArgs() to pass parameters to error object
* harbour/source/rtl/philes.c
* harbour/source/rtl/space.c
* harbour/source/rtl/strpeek.c
* some minor optimizations
* harbour/source/vm/arrays.c
- removed hb_arrayRelease() function.
* changed hb_arrayReleaseGarbage() to be safe for recursive call
* updated to use GC counters
* harbour/source/vm/arrayshb.c
* use stack function/macros instead of direct accessing HB_STACK members
* harbour/source/vm/asort.c
* removed unused HB_ASORT_OPT_ITEMCOPY
* harbour/source/vm/classes.c
* added class code from HVM
% added fast overloaded operator detection and execution
+ added hb_objHasOperator(), hb_objOperatorCall()
+ added separated overloading of "=" and "==" operators
* operate on PHB_SYMB not PHB_FUNC - support for pure PCODE function
without any machine code
* use stack function/macros instead of direct accessing HB_STACK members
* separated profiler code
* some code cleaning
* harbour/source/vm/codebloc.c
+ added USHORT usLen parameter to hb_codeblockMacroNew() - when sets
to non 0 value it informs that PCODE should be copied to dynamically
allocated buffer.
* updated to use GC counters
- removed hb_codeblockDelete() function.
* changed hb_codeblockDeleteGarbage() to be safe for recursive call
- removed restoring statics base in hb_codeblockEvaluate()
* harbour/source/vm/debug.c
* cleaned and optimized some code
* harbour/source/vm/dynlibhb.c
+ added support for loading and unloading dynamic libraries with PCODE
+ added support for dynamic libraries in Linux (.so)
+ added HB_LIBERROR() - returns error string with last error in
HB_LIBLOAD() - now works only in Linux
* harbour/source/vm/dynsym.c
* separated profiler code
+ use pDynSym->pSymbol->value.pFunPtr instead of pDynSym->pFunPtr
* harbour/source/vm/estack.c
+ added #include "hbapicls.h"
+ added hb_stackPushReturn(), hb_stackPopReturn()
* harbour/source/vm/eval.c
* harbour/source/vm/extend.c
* use stack function/macros instead of direct accessing HB_STACK members
+ added hb_retptrGC()
* harbour/source/vm/fm.c
+ added hb_xRefInc(), hb_xRefDec(), hb_xRefFree(), hb_xRefCount(),
hb_xRefResize() functions. They are internal Harbour VM functions
and covered by internal API macro. Should not be used by 3-rd
party code because we may change them in the future or even remove.
* harbour/source/vm/garbage.c
+ added hb_gcRefInc(), hb_gcRefDec(), hb_gcRefFree(), hb_gcRefCount()
functions. These are also internal function which corresponds to the
above hb_x*() ones.
* changed Step 3 of GC pass and execution of clean-up function to be
safe for recursive calls and additional activity.
Ryszard see my note and s_pDeletedBlock
+ added GC inspected HB_IT_POINTER items.
* harbour/source/vm/hvm.c
* separated profiler code
* separated class code from HVM
+ added support for loading and unloading libraries with PCODE modules
+ added support for pure PCODE functions
+ added support for string item resizing and preallocating string buffer
+ added some new multipcode functions for -gc3 optimization
+ added hb_vmProcessSymbolsExt(), hb_vmRegisterSymbols(),
hb_vmFreeSymbols(), hb_vmBeginSymbolGroup(),
hb_vmInitSymbolGroup(), hb_vmExitSymbolGroup()
* changed hb_vmProcessSymbols() to return address of register symbol
table. For normal code it's the same address as given in parameter
so it does not break backward binary compatibility.
+ use new code for operator overloading
* changed FOR EACH to dynamically check iteration scope in
hb_vmEnumNext()/hb_vmEnumPrev() and remove max number of iteration
stored on HVM stack
* temporary use hb_itemUnRefOnce() instead of hb_itemUnRefRefer() as
workaround for possible GPF. I'd like Ryszard will chose the final
version
* harbour/source/vm/itemapi.c
+ added support for preallocating string buffer size
+ added hb_itemUnShareString() and hb_itemReSizeString()
* updated string items to use counters allocated with each
memory block by xh_xgrab()/hb_xalloc()
* updated codeblock and array items to use GC reference counters
+ added GC inspected HB_IT_POINTER items.
* generate RT error in hb_itemUnreOnce() for enumerator items
out of scope
+ added hb_itemPutPtrGC()
* harbour/source/vm/macro.c
* use pDynSym->pSymbol->value.pFunPtr instead of pDynSym->pFunPtr
* harbour/source/vm/maindllp.c
* updated usage of hb_vmProcessSymbols()
* added hb_vmProcessSymbolsExt()
* harbour/source/vm/memvars.c
+ added hb_memvarGetItem()
- removed hb_memvarValueDecGarbageRef()
* harbour/source/vm/proc.c
+ added #include "hbapicls.h"
* harbour/source/vm/pvalue.c
* do not access stack structure directly but use hb_stack*()
functions (macros)
* harbour/source/vm/runner.c
* synced with xHarbour
* harbour/utils/hbtest/rt_misc.prg
* added overloading "=" operator. Now "==" and "=" can be overloaded
with different methods
All names I used for new functions/macros can be changed. Please look at
it and if you will some better propositions then we can use it.
hb_vmProcessSymbolsExt() is added but not used yet.
* harbour/harbour.spec
* harbour/make_bsd.sh
* harbour/make_drw.sh
* harbour/make_gnu.sh
* harbour/make_rpm.sh
* harbour/make_tgz.sh
* harbour/bin/hb-func.sh
* harbour/bin/pack_src.sh
* harbour/config/c.cf
* harbour/config/global.cf
* harbour/config/rules.cf
* harbour/config/darwin/gcc.cf
* harbour/config/darwin/global.cf
* harbour/config/dos/djgpp.cf
* harbour/config/dos/global.cf
* harbour/config/dos/install.cf
* harbour/config/dos/owatcom.cf
* harbour/config/hpux/gcc.cf
* harbour/config/hpux/global.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/global.cf
* harbour/config/linux/owatcom.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/watcom.cf
* include ADSRDD by default in RPMs
* updated for new RPM which does not accept some old tags
* set -fPIC on 64bit platforms
+ added /etc/harbour/hb-charmap.def
* updated for new GT system and drivers
* harbour/contrib/dot/pp.prg
* harbour/contrib/dot/pp_harb.ch
* use _APMAIN as startup function
* cleaned direct access to item internals
* harbour/contrib/libct/Makefile
+ harbour/contrib/libct/ctwfunc.c
+ harbour/contrib/libct/ctwin.c
+ harbour/contrib/libct/ctwin.h
* added CT3 like Window System - it's a GT driver which inherits
from the existing one and adds CTW functionality
* harbour/contrib/libct/screen1.c
* updated for GTAPI modifications
* harbour/contrib/libnf/Makefile
* harbour/contrib/libnf/chdir.c
* harbour/contrib/libnf/mkdir.c
* harbour/contrib/libnf/rmdir.c
* use hb_fs*() API functions instead of calling DOS interrupts
Now NF dir functions works on all platforms - it will be nice
to update other functions too.
* harbour/contrib/libnf/dispc.c
* harbour/contrib/libnf/ftattr.c
* updated for GT API modifications, some of this code still depends
on EGA/VGA video buffer so will work only if user will force in GT
using it - it will be nice to rewrite them
* harbour/contrib/odbc/odbc.c
* harbour/contrib/ole/ole2.c
* casting and cleaning direct access to item internals
* harbour/contrib/rdd_ads/ads1.c
* harbour/contrib/rdd_ads/adsfunc.c
* harbour/contrib/rdd_ads/adsmgmnt.c
* synced with xHarbour
* harbour/include/Makefile
* added new header files
+ harbour/include/hbgtinfo.ch
+ added GTI_* defintions for hb_gtInfo() function.
This function works in similar way to dbInfo() in RDD.
The GTI_* definitions are taken from xHarbour "as is" and
they should be cleaned - not all functionality are supported
in Harbour and some others should be implemented in differ
way then in xHarbour.
+ harbour/include/hbgtcore.h
* harbour/include/hbapigt.h
* new GTAPI
hbgtcore.h file should not be included by user code
it's only for internal use in GT drivers
* HB_inkey_enum changed to int - this is bit field not enumerated type.
Many of C/C++ compilers forbid bit operations on enum types and
forcing it by casting which finally exceeds the enum range is defined
as bug because it may badly interacts with some compiler optimizations
* harbour/include/hbapi.h
* harbour/include/hbapicdp.h
* harbour/include/hbapierr.h
* harbour/include/hbapifs.h
* harbour/include/hbapiitm.h
* harbour/include/hbapilng.h
* harbour/include/hbapirdd.h
* harbour/include/hbdate.h
* harbour/include/hbdefs.h
* harbour/include/hbinit.h
* harbour/include/hbpcode.h
* harbour/include/hbrdddbf.h
* harbour/include/hbset.h
* harbour/include/hbstack.h
* harbour/include/hbvm.h
* harbour/include/hbvmopt.h
* harbour/include/hbvmpub.h
* separated internal and external API. Now the definitions for
internal HVM structures and functions are excluded by default
they could be enabled if user include hbvmopt.h before other
header files. Such operation should be done _ONLY_ by core
code - if 3-rd party developers make sth like that then it's
for their own risk and such code may stop to work with next
Harbour versions. Without hbvmopt.h the internal structures
like HB_ITEM, HB_DYNS, ... are mapped to 'void' so there is
no way to access their members so we can modify them in the
future without afford for 3-rd party code.
There is one small exception 'type' should be the first member
for HB_ITEM structure because I used a small ugly hack in
HB_IS_*() macros with castin PHB_ITEM to HB_TYPE* - it works
without speed overhead but if you think that it will be
better/cleaner to not use such tricks then it's enough to
change HB_ITEM_TYPE() definitions in hbvmpub.h - see note.
* cleared the usage of HB_EXPORT - to avoid problems with some C/C++
compilers we agreed that the only one common way of using HB_EXPORT
is adding it ad begining of declaration - please keep this convention
in the future.
+ added new functions:
hb_extIsObject(), hb_codeblockId(), hb_idleSleep(),
hb_fsGetOsHandle(),
hb_dynsymFindSymbol(), hb_dynsymGetSymbol(),
hb_dynsymSymbol(), hb_dynsymName(),
hb_dynsymMemvarHandle(), hb_dynsymAreaHandle(), hb_dynsymSetAreaHandle()
* changed hb_arrayClone() declaration to:
PHB_ITEM hb_arrayClone( PHB_ITEM pArray )
* changed hb_arrayFromParams() declaration to:
PHB_ITEM hb_arrayFromParams( int iLevel )
The previous version needed a pointer to stack relocatable area
so any stack resizing could cause GPF.
* harbour/include/inkey.ch
* added definitions for extended mouse keys/events and some key
combinations
* harbour/source/codepage/uc1250.c
* harbour/source/codepage/uc1251.c
* harbour/source/codepage/uc1253.c
* harbour/source/codepage/uc1257.c
* harbour/source/codepage/uc737.c
* harbour/source/codepage/uc850.c
* harbour/source/codepage/uc852.c
* harbour/source/codepage/uc866.c
* harbour/source/codepage/uc88591b.c
* harbour/source/codepage/uc8859_1.c
* harbour/source/codepage/uc8859_2.c
* harbour/source/codepage/uc8859_5.c
* harbour/source/codepage/uckoi8.c
* harbour/source/codepage/uckoi8u.c
* harbour/source/codepage/ucmaz.c
* updated unicode values for characters in rabge 1-31 to keep
DOS compatibility
* harbour/source/common/expropt1.c
* harbour/source/common/hbarch.c
* harbour/source/common/hbdate.c
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
* keep HB_EXPORT at the beginning of function declaration
* harbour/include/hbpcode.h
* harbour/include/hbcomp.h
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbfix.c
+ harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbpcode.c
+ harbour/source/compiler/hbstripl.c
% rewritten jump optimization
! fixed some minor problems
* do not optimize jumps and local variable access by shorter
PCODE version and HB_P_NOOP when jump optimization is
disabled, this is a note I left in source code in few places:
/*
* optimizing jumps here by shorting them and setting HB_P_NOOPs
* only slow down the compilation process for three reasons:
* 1. When it's dummy jump to next instruction we need two passes
* in hb_compOptimizeJumps() to fully remove it
* 2. hb_compOptimizeJumps() also make jump shortcutting in each pass
* 3. When Jump Optimization is disabled (-kJ) then it cause slowness
* at runtime because we will have more HVM loops: first for the
* shorter jump and next for the HB_P_NOOP PCODE(s)
* [druzuz]
*/
+ added support for multi passes in jump/dead code elimination
(hb_compOptimizeJumps())
By default is set upto three passes.
Now hb_compOptimizeJumps() keeps all compiler internal data clean
on exist and can be called any times and does not change other
compiler's functions behaviors
+ added dummy jumps elimination
+ added optimization for:
IF .T.
IF .F.
WHILE .T.
WHILE .F.
etc.
* restored empty BEGIN/RECOVER sequence block elimination
if Jump Optimization is enabled then it marks the block
with HB_P_NOOPS else it cut the generated PCODE
+ added dead code eliminator (new functions hb_compCodeTraceMarkDead()/
hb_compPCodeTrace() - it works only when Jump Optimization is
not disabled)
As a result of the above we have smaller and faster PCODE.
I do not think that we will have meta code support in the reasonable
time and because I need some valid compiler data/structures like
updated table of all jumps for real C code (not PCODE in .c files)
generation then I decide to make some modifications and the above
is in practice a side effect of this work.
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/rddord.prg
* harbour/source/rdd/workarea.c
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
* harbour/source/rdd/nulsys/nulsys.c
* synced with my modifications in xHarbour
* updated for API modifications
* harbour/source/rtl/Makefile
+ added gtsys.c, gtfunc.c, hbgtcore.c
* harbour/source/rtl/accept.c
* harbour/source/rtl/alert.prg
* harbour/source/rtl/cdpapi.c
* harbour/source/rtl/console.c
* harbour/source/rtl/dates.c
* harbour/source/rtl/do.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/errorsys.prg
* harbour/source/rtl/file.c
* harbour/source/rtl/fserror.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/hbffind.c
* harbour/source/rtl/idle.c
* harbour/source/rtl/math.c
* harbour/source/rtl/oldclear.c
* harbour/source/rtl/strmatch.c
* harbour/source/rtl/strpeek.c
* harbour/source/rtl/valtype.c
* harbour/source/rtl/xsavescr.c
* updated for API modifications
* cleaned some compiler warnings
* harbour/source/rtl/filesys.c
+ added hb_fsGetOsHandle()
* updated for API modifications
* harbour/source/rtl/gt.c
* harbour/source/rtl/gtapi.c
* harbour/source/rtl/gtapiu.c
+ harbour/source/rtl/gtfunc.c
+ harbour/source/rtl/gtsys.c
+ harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/inkey.c
* harbour/source/rtl/maxrow.c
* harbour/source/rtl/mouseapi.c
* harbour/source/rtl/setcolor.c
* harbour/source/rtl/setposbs.c
* harbour/source/rtl/shadow.c
* new GT API code
* harbour/source/rtl/saverest.c
* changed default behavior in SEVESCREEN/RESTSCREEN with parameters
out of screen range to be Clipper compatible. Added last logical
parameter to keep previous behavior for programs which begins to
use it.
* harbour/source/rtl/seconds.c
* include missing header file to fix C++ compilation
* make hb_secondsCPU global function
* harbour/source/rtl/set.c
* make HB_SET_TYPEAHEAD Clipper compatible
* harbour/source/rtl/gtcgi/Makefile
* harbour/source/rtl/gtcgi/gtcgi.c
- harbour/source/rtl/gtcgi/mousecgi.c
* rewritten for new GT API
some detail behaviors has been changed but I think the current
implementation is better for CGI programs output - please check
and fix me if necessary
* harbour/source/rtl/gtcrs/Makefile
- harbour/source/rtl/gtcrs/charmap.prg
+ harbour/source/rtl/gtcrs/chrmap.c
- harbour/source/rtl/gtcrs/debug.map
- harbour/source/rtl/gtcrs/eterm.map
* harbour/source/rtl/gtcrs/gtcrs.c
+ harbour/source/rtl/gtcrs/gtcrs.h
+ harbour/source/rtl/gtcrs/hb-charmap.def
- harbour/source/rtl/gtcrs/kbdcrs.c
- harbour/source/rtl/gtcrs/keymap.prg
- harbour/source/rtl/gtcrs/linux.map
- harbour/source/rtl/gtcrs/mousecrs.c
* new GTCRS based on my xHarbour and Flagship curses code
Please not that at runtime it looks for a file
/etc/harbour/hb-charmap.def where user can fully tune output
for his terminal. This file is included with proper path in
binaries created by make_rpm.sh and make_tgz.sh
Ryszard I've removed some of your extensions which are no longer
necessary and some other (keyboard sequence redefinition) should
be done in a little bit differ way. I would like to talk about it
when you test current code.
Added support for extended mouse keys (middle button and wheel).
* harbour/source/rtl/gtdos/Makefile
* harbour/source/rtl/gtdos/gtdos.c
- harbour/source/rtl/gtdos/mousedos.c
* rewritten for new GT API
Fixed some small problems, finished mouse code which for DJGPP
is fully Clipper compatible with real mouse SAVE/RESTORE code.
For other compilers it should be updated depending on memory
model and used DPMI driver (if any).
* harbour/source/rtl/gtos2/Makefile
* harbour/source/rtl/gtos2/gtos2.c
- harbour/source/rtl/gtos2/mouseos2.c
* rewritten for new GT API
Fixed some problems and finished the mouse code.
Please test it - I made all modifications without OS2 and
I was not able to make any test. I'm interesting in information
if it works and the speed difference - f.e. results from
tests/vidtest.prg run with previous and current version.
* harbour/source/rtl/gtpca/Makefile
* harbour/source/rtl/gtpca/gtpca.c
- harbour/source/rtl/gtpca/kbdos2.gcc
- harbour/source/rtl/gtpca/mousepca.c
* rewritten for new GT API
and finished so now it's full functional GT driver
I'm interesting in keyboard sequences used by PC-ANSI drivers
in DOS so it will be possible to implement also support for
extended keys input.
* harbour/source/rtl/gtsln/Makefile
* harbour/source/rtl/gtsln/gtsln.c
+ harbour/source/rtl/gtsln/gtsln.h
* harbour/source/rtl/gtsln/kbsln.c
* harbour/source/rtl/gtsln/keytrans.c
* harbour/source/rtl/gtsln/mousesln.c
* rewritten for new GT API basing on current xHarbour code
added support for slang 1.4x patched for UNICODE (Debian
patches used by most of current Linux distributions) and
slang 2.x - It's unicode ready, tries to detect terminal mode
(utf-8/iso) at startup and switch the internal logic to
iso/unicode mode. When compiled with slang 1.4x or 2.x
and terminal is in UTF-8 it can display all characters like
in DOS if only used font have them or good fall-back table is
loaded (f.e. the one created by QRCZAK)
Added support for extended mouse keys (middle button and wheel).
* harbour/source/rtl/gtstd/Makefile
* harbour/source/rtl/gtstd/gtstd.c
- harbour/source/rtl/gtstd/mousestd.c
* rewritten for new GT API
Now it can work as full screen GT driver redrawing the previous
screen contents from internal GT core buffers. I run with this
GT some of my programs and they work quite well ;-) of course
without colors.
* harbour/source/rtl/gtwin/Makefile
* harbour/source/rtl/gtwin/gtwin.c
- harbour/source/rtl/gtwin/mousewin.c
* updated for new GT API
+ harbour/source/rtl/gtxwc/Makefile
+ harbour/source/rtl/gtxwc/gtxwc.c
+ harbour/source/rtl/gtxwc/gtxwc.h
* new XWindow Console GT driver based on my and Giancarlo Niccolai
code form xHarbour - this GT can work in XWindow environment only
and create its own window for console output. It delays the
initialization to the moment when user try to display anything on
the screen so even without X Window system programs which uses this
GT can work as long as use only outstd/outerr output.
* harbour/source/vm/arrays.c
* updated for API modifications
+ added hb_arrayId(),
* changed hb_arrayClone() declaration to:
HB_EXPORT PHB_ITEM hb_arrayClone( PHB_ITEM pSrcArray )
* changed hb_arrayFromParams() declaration to:
PHB_ITEM hb_arrayFromParams( int iLevel )
* harbour/source/vm/arrayshb.c
* updated for API modifications
+ added new parameter iLevel to function HB_APARAMS()
* harbour/source/vm/classes.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/dynlibhb.c
* harbour/source/vm/estack.c
* harbour/source/vm/fm.c
* harbour/source/vm/garbage.c
* harbour/source/vm/maindll.c
* harbour/source/vm/maindllh.c
* harbour/source/vm/maindllp.c
* harbour/source/vm/mainstd.c
* harbour/source/vm/mainwin.c
* harbour/source/vm/memvars.c
* harbour/source/vm/pcount.c
* harbour/source/vm/proc.c
* updated for API modifications
* harbour/source/vm/codebloc.c
* updated for API modifications
+ added hb_codeblockId()
* harbour/source/vm/dynsym.c
* updated for API modifications
+ added new functions:
hb_dynsymFindSymbol(), hb_dynsymGetSymbol(),
hb_dynsymSymbol(), hb_dynsymName(),
hb_dynsymMemvarHandle(), hb_dynsymAreaHandle(), hb_dynsymSetAreaHandle()
* harbour/source/vm/eval.c
* updated for API modifications
* call hb_vmPushState()/hb_vmPopState() in hb_itemDo()/hb_itemDoC()
functions - it's necessary to make HVM reentrant safe.
* harbour/source/vm/extend.c
* updated for API modifications
+ added hb_extIsObject() similar to existing hb_extIsArray()
* harbour/source/vm/hvm.c
* updated for API modifications
+ added new functions: hb_vmPushState(), hb_vmPopState()
which save/restore HVM state (the top stack value which can be
processed and return item and maybe sth else in the future) making
HVM ready for reentrant.
* harbour/source/vm/itemapi.c
* updated for API modifications
+ added new function:
HB_EXPORT PHB_SYMB hb_itemGetSymbol( PHB_ITEM pItem );
! fixed bug in hb_itemPutNInt()
* harbour/tests/Makefile
* harbour/utils/hbdoc/Makefile
* harbour/utils/hbextern/Makefile
* harbour/utils/hbmake/Makefile
* harbour/utils/hbrun/Makefile
* harbour/utils/hbtest/Makefile
- removed badly added: dbfntx, dbfcdx, dbffpt, hbsix libraries.
what broke GNU make compilation for some compilers
This libraries should be included automatically when RDD lib
is included by *.cf files
Summary:
The whole patch (cvs diff -uN) is ~1.5MB length and I cannot describe
everything in details - sorry but it was too much modifications in
one commit so now just some of general notes.
The header files included as is does not have any information about
internal HVM structures and some functions. In practice only HB_SYMB
is public and it has to be public for .c files generated from .prg
so I force the fixed size of this structure (alignment independent)
by redefining some members to union with void * - it's a little bit
ugly trick but it effectively eliminates the problem of linking
binaries compiled with differ alignment C compiler switches.
The structures like HB_ITEM, HB_CODEBLOCK, HB_STACK, HB_DYNS are not
longer defined and pointers to the defined as void * - like in Clipper
the ITEM structure. It caused that I had to add some new functions
to make some operation still possible to implement. If I missed sth
and any of you will have a problem with your code then please inform
me about it and after a small discussion on Harbour developers list
we can decide if other functions should be added.
The internal API is still accessible. It's enough to include "hbvmopt.h"
file before other header files to enable it. Now only files in
source/vm directory include it.
The 3-rd party code which does not include hbvmopt.h (or tries to
set some internals macros) should be safe for future HVM modifications
and will work also with new binaries so 3-rd party library developers
should remember about it. If they won't then it's only their and
their clients problem not Harbour developers.
With this modifications I also create new GT model which is similar
to the one used by RDD with multi inheritance. It can be quite easy
extended to simultaneously load more then one GT subsystem (sth like
work areas in RDD) but I left it for the future when someone may
need it. hbapigt.h file now contains only information about public
functions and does not have any code which depends on current
internal implementation - it should be backword compatible as long
as somone did not try to use internal GT functions.
The internal GT system use hbgtcore.h file which should not be
included by 3-rd party code as long as someone will not make new
GT driver. The internal GT code is new so I expect that it will
be changed yet in the nearest future (I'm waiting for other developers
feedback) and in such case any 3-rd party GTs will have to be updated.
How it works:
The base GT driver (GTNUL) is fully functional GT driver which
makes all operations on memory buffer. After each screen write
Flush() method is called which check for dispcount() and if
it's 0 then call Refresh() method to update modified area by
Redraw() method. This method is dummy in GTNUL and external
output with this GT can be reached by outstd()/outerr() which
are now redirected to GT methods. A simple GT driver may overload
only Refresh() method to give full screen output.
Application can use only this GT driver and it seems to be very
good choice for GUI and background daemon/service programs.
This GT is loaded at startup then all other GTs can be loaded
later and inherit from the previously loaded GT drivers.
The new GT driver can overload as much method as wants/needs.
Now all GT operations are implemented as GT method so GT driver
can easy change their default behavior, f.e. it may fully overload
color parsing methods and use differ or extended to Clipper color
definitions.
I rewrote all existing GTs to work with new GT model.
OS2 users - please test GTOS2 which I was not able to test and
see the note in Redraw() method. If possible please make some
speed tests.
In fact now there is much more internal operations then it was
before but because they are done on memory only then current
code is much faster in this GT drivers which so far makes all
operations on real video area. I made some tests with GTNUL
and tests/vidtest.prg and the total overhead is minimal. Now
dipbegin()/dispend() in practice does not cost anything so it
gives additional speed improvement in application which extensively
use it.
More then one GT driver can be linked with final binaries and
chose on application startup by //GT<NAME> switch and/or environment
variable HB_GT=<name>
In the RTL is new GT function GTSYS() which works in similar way
to RDDSYS() in RDD subsystem and for linking default GT driver
for given platform. When RTL is compiled the default GT driver
is set to HB_GT_DEFAULT envvar and if not exist to HB_GT_LIB
envvar and if it also does not exist to hard coded platfom GTs
(see source/rtl/gtsys.c and source/rtl/Makefile for rules)
Adding to source code:
ANNOUNCE GTSYS
disable linking the default GT driver and:
REQUEST HB_GT_<name>
for linking given (<name>) GT driver, f.e.: REQUEST HB_GT_WIN
If you are working in SH environment (Linux and other *nixes users,
DJGPP bash, MinGW shell then it's possible to use -gt<name> switch
in hblnk / hbmk scripts to force linking GT drivers (it could be
repeated with different <name>) and the first one becomes the default
one. F.e.:
xhbmk -m -n -w -es2 -gtcrs -gtsln -gtstd -gtpca vidtest.prg
Usually the GT driver are loaded at HVM startup but it's possible
to load it later. I created new GT driver CTW which gives full
CT3 like Window system. The CT3 extended driver change the behavior
of some function in Clipper extended driver, f.e WRITECON() or
SETPOS() with parameters out of screen range. So I implemented it
CTW as RT GTs which is loaded when some of CTWIN function is used
(f.e. WOPEN()/WBOARD()) and inherits from any existing GT driver.
This is full CT3 WIN implementation with all detail behaviors I
found (with some CT3 bug fixes). It does not have any CT3 limitations
and can be used for any virtual screen/window size though I hardcoded
CT3 limitation for backword compatibility. If somone will want to
remove it then it will be enough to delete few lines from ctwin.c
file. I'm not CTWIN Clipper user so maybe I missed some side effects
in this driver and was not able to well test it so if you will find
any incompatibilities then please inform me.
THe default GT buffer uses 32bit character cell internally but
in savescreen/restscreen it uses VGA compatible two bytes character
cell. Some GT drivers may want to use differ character cell.
Now GTCRS and GTSLN use 32bit character cell by default. They
need additional information about character set (box/normal) to
properly display box characters. It is possible to force in this
GT drivers using Clipper compatible character cell by calling:
hb_gtInfo( GTI_COMPATBUFFER, <lCompat> ) -> <lPreviousSeting>
but in may cause that box drawing characters will be lost in
some countries after RESTSCREEN(). It will depend on used code
page.
HB_GTINFO() is new function which works in similar way to DBINFO()
in RDD. It allows to retrieve/change some of GT driver settings.
GTI_* actions are defined in hbgtinfo.ch - it has all GTI_*
definitions used in xHarbour. Now in Harbour only few of them
are implemented.
The new three .prg functions:
HB_SETKEYCP( <cTermCP> [,<cHostCP>] )
HB_SETDISPCP( <cTermCP> [,<cHostCP>] [,<lBoxChar>] )
HB_SETTERMCP( <cTermCP> [,<cHostCP>] [,<lBoxChar>] )
have been added. They set automatic input (HB_SETKEYCP)
and output (HB_SETDISPCP) (or both: HB_SETTERMCP) character
translation. They are also important for some GTs which
informing them about used internal code page for unicode
translation (GTXWC, GTSLN) and/or chosing proper character
set (standard/alternate) for letters and other (f.e. box
drawing characters) (GTCRS, GTSLN),
<cTermCP> is encoding used on external (terminal) side
<cHostCP> is encoding used internally, if not given then
current code page set HB_SETCODEPAGE() is used.
some of GTs which uses unicode output may
ignore <cTermCP>
<lBoxChar> is optional parameter which interacts with dispbox()
output disabling switching to alternate character
set in some GTs. It effectively causes that if internal
(host) code page contains some letters on the box char
positions then they will be shown also by box drawing
functions like dispbox() instead of CP437 characters.
In some cases it could be useful. By default lBoxChar
is not set and GTs which can switch between standard
and alternate character set (GTCRS, GTSLN) will try to
use alternate character set for box drawing functions.
Victor: I removed some of your functions. They can be very easy
implemented with hb_gt_GetChar()/hb_gt_PutChar() but I do not want to
make them part of documented external API because some GT drivers may
want to use absolutely differ color definitions and they will stop to
work so I do not want to make this functions documented external API.
Ryszard: Setting alternative debug keys does not longer work.
I like such possibilities but it should be implemented in differ
way to f.e. using HB_GTINFO interface to allow low level GT driver
extensions, f.e. in *nixes using CTRL+[A-Z] and SIGINT, SIGQUIT,
SIGTSTP signals for real asynchronous setting of debug/cancel flag
without keyboard polling from main HVM loop. I would like to discus
about such more general solution.
*** Please updated non GNU make files ***
+ harbour/config/hpux/dir.cf
+ harbour/config/hpux/gcc.cf
+ harbour/config/hpux/global.cf
+ harbour/config/hpux/install.cf
* Marcelo's files build files for HPUX borrowed from xHarbour
* harbour/bin/hb-func.sh
* harbour/bin/hb-mkslib.sh
* harbour/bin/postinst.sh
* recent Phil's changes for Darwin and some of mine modifications and
cleanups
* harbour/include/Makefile
+ added some missing header files
* harbour/include/hbapi.h
+ added HB_ITEM_{GET|PUT}_NUMINTRAW() macros
+ added hb_objGetClass()
* harbour/include/hbdefs.h
* redefined multi commands macros to use do {...} while(0) for safe
use in any of C statement
+ added HB_OS_HPUX
* harbour/include/hbsetup.h
+ added HB_OS_HPUX
* harbour/include/hbstack.h
* hb_stackDec(), hb_stackPop(), hb_stackPush() redefined also as macros
when HB_STACK_MACROS is set
+ added function hb_stackIncrease()
* harbour/source/common/hbstr.c
* fixed possible buffer overflow
* harbour/include/hbrdddbf.h
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/workarea.c
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfdbt/dbfdbt1.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* my recent fixes in xHarbour
* harbour/source/rtl/copyfile.c
* small fix to error message
* harbour/source/rtl/idle.c
+ added HB_IDLESLEEP() and
void hb_idleSleep( double dSeconds )
* harbour/source/rtl/isprint.c
* use hb_xgrab()/hb_xfree() instead of malloc()/free()
* harbour/source/rtl/run.c
* added __WATCOMC__ to C compilers supporting system()
* harbour/source/vm/arrays.c
* cleaned hb_arrayFromStack(), hb_arrayFromParams()
* harbour/source/vm/arrayshb.c
* small fixes to error messages
! improved Clipper compatibility in AFILL()
* harbour/source/vm/asort.c
* separate entry for integer items - conversion to double may
damage big 64bit numbers
* harbour/source/vm/classes.c
+ added USHORT hb_objGetClass( PHB_ITEM pItem )
* harbour/source/vm/dynsym.c
! fixed accessing to uninitialized memory
* harbour/source/vm/estack.c
+ added hb_stackIncrease() and modification for new stack macros
* harbour/source/vm/hvm.c
* fixed some error messages
* some speed improvements
* harbour/source/vm/itemapi.c
* some small optimizations
* harbour/utils/hbtest/rt_misc.prg
* modified file name conversions test results for __PLATFORM__UNIX
* harbour/bin/hb-func.sh
* changed 'sed' and 'tr' expresions to be compatible with SunOS
+ added Darwin dynlib support borrowed from xHarbour thanks
to Phil Krylov
* harbour/bin/hb-mkslib.sh
* minor modification
* harbour/bin/postinst.sh
* harbour/config/darwin/gcc.cf
+ Phil's modification for Darwin
* removed HB_OS_BSD and HB_BIG_ENDIAN - the first macro is set in
hbsetup.h when HB_OS_DARWIN is set, the second one should be
automatically detected inside hbdefs.h using C header files.
* harbour/config/sunos/gcc.cf
* removed HB_BIG_ENDIAN macro - the same as above
* harbour/include/hbapi.h
* harbour/source/vm/fm.c
* changed 16/32 bit hack #if UINT_MAX == ULONG_MAX for hb_xmem*()
functions to still not perfect but working on current platforms
#if UINT_MAX > USHRT_MAX
* harbour/include/hbdefs.h
+ added HB_DBL_LIM_INT24(d) and HB_LIM_INT24(l) macros
+ try to autodect byte order using information form system C header
files - it whoud work for Linux, BSD/Darwin, SunOS - maybe also
for some other *nixes
* removed some dangerous casting. [x]Harbour code still depnds on
8bytes double - in CDX for binary compatibility IEEE754 double is
necessary - if some architectures uses differ type of double value
for binary compatibility we will have to create proper conversion
functions for HB_{PUT|GET}_{LE|BE}_DOUBLE and HB_ORD2DBL/HB_DBL2ORD
macros
* harbour/include/hbsetup.h
* define HB_OS_UNIX when HB_OS_SUNOS set
* harbour/source/common/hbstr.c
* harbour/source/pp/ppcore.c
* casting
* harbour/source/compiler/harbour.c
* use HB_LIM_INT*() macros instead of hard coded values
* removed some unnecessary if () statement - always true
* harbour/source/compiler/harbour.l
* harbour/source/compiler/hbfix.c
* harbour/source/vm/macro.c
* use HB_LIM_INT*() macros instead of hard coded values
* harbour/source/rdd/dbfcdx/dbfcdx1.c
! minor fix
* harbour/source/rdd/dbfntx/dbfntx1.c
! small fix - the temporary index file was not removed
* do not force any name for temporary index files - important
in some cases (like DOS and short file names)
* harbour/source/rtl/diskspac.c
! fixed type in SunOS version
* harbour/source/rtl/gtsln/Makefile
* minor cleanups
* harbour/utils/hbtest/rt_math.prg
* changed to number results to be Clipper compatible.
* harbour/Makefile
+ harbour/make_bsd.sh
+ harbour/make_drw.sh
* harbour/make_tgz.sh
+ harbour/bin/hb-func.sh
* harbour/bin/pack_src.sh
+ harbour/bin/postinst.bat
+ harbour/bin/postinst.sh
* harbour/config/dir.cf
* harbour/config/bsd/gcc.cf
* harbour/config/bsd/global.cf
+ harbour/config/darwin/dir.cf
+ harbour/config/darwin/gcc.cf
+ harbour/config/darwin/global.cf
+ harbour/config/darwin/install.cf
* harbour/config/dos/dir.cf
* harbour/config/dos/global.cf
* harbour/config/dos/install.cf
* harbour/config/dos/owatcom.cf
* harbour/config/dos/watcom.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/global.cf
* harbour/contrib/Makefile
* harbour/contrib/dot/pp_harb.ch
* harbour/contrib/libct/Makefile
* harbour/contrib/libct/bit1.c
* harbour/contrib/libct/bit2.c
* harbour/contrib/libct/bit3.c
* harbour/contrib/libct/files.c
* harbour/contrib/libct/ftoc.c
- harbour/contrib/libct/invertwin.prg
+ harbour/contrib/libct/invrtwin.prg
* harbour/contrib/libct/keyset.c
* harbour/contrib/libct/makefile.bc
* harbour/contrib/libmisc/dates2.c
* harbour/contrib/rdd_ads/ads1.c
* harbour/contrib/rdd_ads/adsfunc.c
* harbour/contrib/samples/date.c
* harbour/include/dbinfo.ch
* harbour/include/hbapi.h
* harbour/include/hbapicdp.h
* harbour/include/hbapifs.h
* harbour/include/hbapigt.h
* harbour/include/hbapiitm.h
* harbour/include/hbcomp.h
* harbour/include/hbdate.h
* harbour/include/hbdbf.h
* harbour/include/hbdbferr.h
* harbour/include/hbdefs.h
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbmath.h
* harbour/include/hbpcode.h
* harbour/include/hbrddcdx.h
* harbour/include/hbrdddbf.h
* harbour/include/hbrdddbt.h
* harbour/include/hbrddfpt.h
* harbour/include/hbrddntx.h
* harbour/include/hbset.h
* harbour/include/hbsetup.h
* harbour/include/set.ch
* harbour/source/common/Makefile
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
- harbour/source/common/hbffind.c
* harbour/source/common/hbfsapi.c
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
+ harbour/source/common/hbverdsp.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.slx
* harbour/source/compiler/harbour.sly
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbusage.c
* harbour/source/compiler/simplex.c
* harbour/source/macro/macro.l
* harbour/source/macro/macro.slx
* harbour/source/macro/macro.y
* harbour/source/pp/ppcore.c
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/dbfcdx/dbfcdx1.c
- harbour/source/rdd/dbfcdx/dbfcdx1.h
* harbour/source/rdd/dbffpt/dbffpt1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
* harbour/source/rtl/Makefile
* harbour/source/rtl/abs.c
* harbour/source/rtl/at.c
* harbour/source/rtl/datec.c
* harbour/source/rtl/dates.c
* harbour/source/rtl/dateshb.c
* harbour/source/rtl/datesx.c
* harbour/source/rtl/empty.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/errorint.c
* harbour/source/rtl/filesys.c
* harbour/source/rtl/fstemp.c
+ harbour/source/rtl/hbffind.c
* harbour/source/rtl/hbrandom.c
* harbour/source/rtl/idle.c
* harbour/source/rtl/inkey.c
* harbour/source/rtl/math.c
* harbour/source/rtl/minmax.c
* harbour/source/rtl/pad.c
* harbour/source/rtl/padc.c
* harbour/source/rtl/padl.c
* harbour/source/rtl/padr.c
* harbour/source/rtl/philes.c
* harbour/source/rtl/round.c
* harbour/source/rtl/soundex.c
* harbour/source/rtl/str.c
* harbour/source/rtl/strcase.c
* harbour/source/rtl/strmatch.c
* harbour/source/rtl/strtran.c
* harbour/source/rtl/strzero.c
* harbour/source/rtl/substr.c
* harbour/source/rtl/val.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtcrs/kbdcrs.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtsln/kbsln.c
* harbour/source/rtl/gtsln/keytrans.c
* harbour/source/vm/arrays.c
* harbour/source/vm/codebloc.c
* harbour/source/vm/estack.c
* harbour/source/vm/eval.c
* harbour/source/vm/extend.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/macro.c
* harbour/source/vm/memvars.c
* harbour/source/vm/runner.c
* harbour/tests/bldtest/bldtest.c
* harbour/utils/hbtest/hbtest.prg
* harbour/utils/hbtest/rt_misc.prg
* harbour/utils/hbtest/rt_str.prg
* Sorry but it's too much modification for full description
cvs diff gives file 785982 bytes length. So I only count the
main things:
! cleand the code (no more warning messages under Linux and GCC and
DOS OpenWatcom) - some of them were real bugs
! cleaned all endian dependend code I've found - now Harbour can be
compiled on LITLE and BIG endian machines - for some other like
PDP ENDIAN it's enough to define proper macros in hbdefs.h
+ added macros for to get/put values in chosen byte order:
HB_GET_LE_[U]INT{16,24,32,64}( pPtr )
HB_GET_BE_[U]INT{16,24,32,64}( pPtr )
HB_PUT_LE_[U]INT{16,24,32,64}( pPtr, nVal )
HB_PUT_BE_[U]INT{16,24,32,64}( pPtr, nVal )
+ added macro HB_CAST_BYTE_NUMBERS_OFF which disables casting in
HB_{GET|PUT}_{LE|BE}_* macros - it's necessary for some platforms
like ALPHA DEC.
! cleaned the code for 64bit machines
* changed all parameters in hb_date* functions (day, month, year, week)
from LONG to int - it doesn't change binary compatibility for 32bit
machines but can cause troubles with compiling the old source
+ changed HB_IT_LONG type to HB_LONG which is mapped to long long
by default for 32 bit machines.
+ change HB_IT_INTEGER to be real 'int' C type not 'short int'
+ added HB_IS_NUMINT() macro
+ added hb_parnll, hb_stornll, hb_retnll, hbretnlllen, hb_itemPutNLL,
hb_itemPutNLLLen, hb_itemGetNLL which operates on LONGLONG
+ added hb_parnint, hb_stornint, hb_retnint, hb_retnintlen,
hb_itemPutNInt, hb_itemPutNIntLen, hb_itemGetNInt which operates on
HB_LONG
+ added HB_PUSHLONGLONG pcode
+ changed compiler and optimizer to use HB_LONG numbers and reduce
conversion from to double which may damage the 64bit number.
+ common functions for string to number conversions for compiler, RTL
and RDD to reduce problems with differ FL values for the same number:
hb_compStrToNum(), hb_valStrnToNum(), hb_strToNum(), hb_strnToNum()
+ common function hb_numRoun() which uses exactly the same algorithms
as string to number conversion for the same reason - please keep
this functions together.
+ hack inside hb_numRound() similar to the one used by CL5.3
+ hb_numInt() which uses uses the same hack as hb_numRound()
+ rewritten number to string conversion
+ some new string manipulation functions hb_strncpy(), hb_strncat(), ...
They works differ the the C one - always set 0 at the end, the buffer
has to be n+1 bytes length, the n is total size of buffer not the
left free space.
! cleaned some code which operates on ASCIIZ string to avoid potential
buffer overflow
+ updated RDD code - it's the first part - in few days I plan to change
workarea structure in both projects - it will break any 3rd party RDDs
so they have to be updated. I want to add SUPERTABLE into workarea
to allow creating new RDD on-line.
! cleaned the bugs with negating integers - on most machines (like x86)
the integers are not 0 symmetric - it means that x = -x does not work
for {INT,LONG,LONGLONG}_MIN (hb_vmNegate, ABS())
+ cleaned error messages to be Clipper compatible.
+ updated build process for .DEB packages - now hb* scripts and shared
libs are created by standard make install
* added new .prg #defines: __PLATFORM__<cPlatfrom>,
__ARCH{16|32|64}BIT__, __LITTLE_ENDIAN__|__BIG_ENDIAN__|__PDP_ENDIAN__
!!! cPlatfrom can have lower letters (for xHarbour compatibility)
If you do not like it please change it.
* others ...
* make_gnu.bat
! Fixed maker to make -r
* Added %HARBOURDIR% and removed trailing slash from HB_BIN_INSTALL, HB_LIB_INSTALL and HB_INC_INSTALL
* contrib/dot/pp.prg
* Minor corrections to stringifys
* utils/hbtest/hbtest.prg
* Commented out RddSetDefault( "DBFCDX" )
* hb_slex.bc
* Synchronized with makefile.bc
* include/hbclass.ch
+ Added: [AS <type>] optional clause to all Methods/Messages syntax.
+ Added directives to generate class declaration from same class creation code.
* include/hbcomp.h
* source/compiler/harbour.c
+ Added: char hb_comp_cDataListType;
* source/compiler/harbour.l
+ Added support for new _HB_CLASS and _HB_MEMBER alternate class declaration syntax.
* source/macro/macro.slx
! Moved .T., .Y., .F., and, .N. from self contained words to words.
* source/compiler/harbour.slx
! Moved .T., .Y., .F., and, .N. from self contained words to words.
+ Added support for new _HB_CLASS and _HB_MEMBER alternate class declaration syntax.
* source/compiler/harbour.y
! Improved definition of formal and optional paramter lists.
+ Added support for alternate class declaration syntax:
_HB_CLASS ClassName
_HB_MEMBER { [AS ...] Var1, VarN }
_HB_MEMBER MethodName( [ [OPTIONAL] [@]FormalParam [AS ...] | @FunPointer() ] ) [ AS ... ]
/* This syntax allows the class declaration to be on multiple seperated lines (needed to allow utilization of class creation code.)
Tokens _HB_CLASS & _HB_MEMBER are not final, until some discussion with Ryszard. */
* source/compiler/hbpcode.c
* Completed classes strong type support for adaptive type variable.
* source/rtl/tlabel.prg
* source/rtl/treport.prg
! Corrected typos: AS {} -> INIT {} AS ARRAY, AS .T. -> INIT .T. AS LOGICAL etc..
* tests/testdecl.prg
* Changed to demonstrate class creation used as declaration.
* utils/hbtest/hbtest.prg
* Changed DBFNTX -> DBFCDX (was not working because DBFNTX is disabled.
