* src/compiler/hbmain.c
* src/compiler/cmdcheck.c
* src/compiler/hbcomp.c
* src/compiler/hbusage.c
* include/hbcompdf.h
+ Added support for -i- and -i+ options. They will disable/enable
handling of INCLUDE envvar.
* config/rules.mk
+ Added -i- Harbour compiler switch to avoid any interference
with user set INCLUDE envvars.
* harbour/include/hbapilng.h
+ harbour/include/hbmsgreg.h
+ added common for all Harbour lang modules (msg*.c) header file
with initialization code
* harbour/src/lang/msgbe866.c
* harbour/src/lang/msgbewin.c
* harbour/src/lang/msgbg866.c
* harbour/src/lang/msgbgiso.c
* harbour/src/lang/msgbgmik.c
* harbour/src/lang/msgbgwin.c
* harbour/src/lang/msgca.c
* harbour/src/lang/msgcs852.c
* harbour/src/lang/msgcsiso.c
* harbour/src/lang/msgcskam.c
* harbour/src/lang/msgcswin.c
* harbour/src/lang/msgde.c
* harbour/src/lang/msgdewin.c
* harbour/src/lang/msgel.c
* harbour/src/lang/msgelwin.c
* harbour/src/lang/msgeo.c
* harbour/src/lang/msges.c
* harbour/src/lang/msgeswin.c
* harbour/src/lang/msgeu.c
* harbour/src/lang/msgfr.c
* harbour/src/lang/msggl.c
* harbour/src/lang/msghe862.c
* harbour/src/lang/msghewin.c
* harbour/src/lang/msghr437.c
* harbour/src/lang/msghr852.c
* harbour/src/lang/msghriso.c
* harbour/src/lang/msghrwin.c
* harbour/src/lang/msghu852.c
* harbour/src/lang/msghucwi.c
* harbour/src/lang/msghuiso.c
* harbour/src/lang/msghuwin.c
* harbour/src/lang/msgid.c
* harbour/src/lang/msgis850.c
* harbour/src/lang/msgit.c
* harbour/src/lang/msgko.c
* harbour/src/lang/msgltwin.c
* harbour/src/lang/msgnl.c
* harbour/src/lang/msgpl852.c
* harbour/src/lang/msgpliso.c
* harbour/src/lang/msgplmaz.c
* harbour/src/lang/msgplwin.c
* harbour/src/lang/msgpt.c
* harbour/src/lang/msgptiso.c
* harbour/src/lang/msgro.c
* harbour/src/lang/msgru866.c
* harbour/src/lang/msgrukoi.c
* harbour/src/lang/msgruwin.c
* harbour/src/lang/msgsk852.c
* harbour/src/lang/msgskiso.c
* harbour/src/lang/msgskkam.c
* harbour/src/lang/msgskwin.c
* harbour/src/lang/msgsl437.c
* harbour/src/lang/msgsl852.c
* harbour/src/lang/msgsliso.c
* harbour/src/lang/msgslwin.c
* harbour/src/lang/msgsr852.c
* harbour/src/lang/msgsriso.c
* harbour/src/lang/msgsrwin.c
* harbour/src/lang/msg_tpl.c
* harbour/src/lang/msgtr857.c
* harbour/src/lang/msgtrwin.c
* harbour/src/lang/msgua866.c
* harbour/src/lang/msguados.c
* harbour/src/lang/msguakoi.c
* harbour/src/lang/msguawin.c
* harbour/src/lang/msgzhb5.c
* harbour/src/lang/msgzhgb.c
* modified to use initialization code defined in common for all
lang modules header file.
* harbour/contrib/gtwvg/wvggui.c
* harbour/contrib/hbqt/qtgui/QApplication.cpp
* harbour/contrib/hbqt/qth/QApplication.qth
* use default GT startup cvode (#include "hbgtreg.h")
* harbour/include/hbinit.h
+ harbour/include/hbiniseg.h
* replaced HB_MSC_STARTUP code with more universal HB_DATASEG_STARTUP
* moved HB_DATASEG_STARTUP code to separate header file to reduce
modifications in other files when this code has to be changed or
extended
+ added support for startup code in OpenWatcom C builds. Now we can
create OpenWatcom Harbour binaries without forcing C++ mode.
I've tested Linux and Win32 builds and they works correctly.
Probably similar solution can be used also for other C compilers
which do not have native interface to define starup code.
* harbour/src/compiler/genc.c
* harbour/utils/hbmk2/hbmk2.prg
* harbour/include/hbcdpreg.h
* harbour/include/hbgtreg.h
* harbour/src/rtl/hbregex.c
* harbour/src/rdd/dbf1.c
* harbour/src/rdd/dbfcdx/dbfcdx1.c
* harbour/src/rdd/dbffpt/dbffpt1.c
* harbour/src/rdd/dbfnsx/dbfnsx1.c
* harbour/src/rdd/dbfntx/dbfntx1.c
* harbour/src/rdd/delim1.c
* harbour/src/rdd/sdf1.c
* harbour/src/pp/pplib3.c
* harbour/contrib/rddads/ads1.c
* harbour/contrib/rddads/adsx.c
* harbour/contrib/rddsql/sddfb/fbirddd.c
* harbour/contrib/rddsql/sddmy/mysqldd.c
* harbour/contrib/rddsql/sddodbc/odbcdd.c
* harbour/contrib/rddsql/sddpg/pgsqldd.c
* harbour/contrib/rddsql/sqlbase.c
* harbour/contrib/rddsql/sqlmix.c
* harbour/contrib/hbbmcdx/bmdbfcdx.c
* harbour/contrib/hbmemio/memio.c
* harbour/contrib/hbnetio/netiocli.c
* harbour/contrib/hbbtree/hb_btree.c
* harbour/contrib/hbwin/olecore.c
* harbour/contrib/hbwin/win_com.c
* modified to use HB_DATASEG_STARTUP instead of HB_MSC_STARTUP
Now HB_MSC_STARTUP is local macro used only in hbinit.h.
Please make MSVC build tests.
* harbour/contrib/hbmemio/memio.c
! declare s_fileFuncs structure as static
* removed unnecessary code to directly register HB_MEMIO symbol.
Mindaugas if you need it for some reasons then I can reactivate it
but I would like to know why it's necessary for you.
* harbour/src/vm/task.c
! added missing {}
* harbour/src/vm/fm.c
* locally disabled "unreachable code" warnings for dlmalloc.c
compilation by OpenWatcom in pure C mode
* harbour/src/rtl/hbzlibgz.c
* minor code cleanup
* harbour/src/rtl/filesys.c
* pacified OS/2 warnings
* harbour/contrib/hbcairo/core.c
! fixed casting for C++ builds
* harbour/contrib/hbwin/wapi_winbase.c
! fixed casting
* harbour/src/Makefile
* changed the order of compiled libraries to improve little bit
the speed in concurrent (-j<N>) builds
* src/macro/Makefile
- src/macro/macro.l
* src/compiler/Makefile
- src/compiler/harbour.l
- src/compiler/fixflex.c
* INSTALL
* config/c.mk
* config/rules.mk
* Deleted references to Flex and related files.
Flex is not used since long. It couldn't generate MT safe lexer code.
* utils/hbmk2/hbmk2.prg
+ Added -hbmake=<hbmake file> option which will attempt to
read hbmake project file and save it as .hbp file.
This is experimental and I'd like to ask hbmake users to
update/extend this converter code as I'm not hbmake user.
This feature is to aid users to migrate from hbmake to hbmk2.
Notice that along the same line converter could be written
for .xbp and xMate project files too.
* src/compiler/Makefile
- src/compiler/gencobj.c
* src/compiler/hbmain.c
* src/compiler/cmdcheck.c
* src/compiler/hbusage.c
* include/hbcompdf.h
* debian/rules
* mpkg_src.sh
* mpkg_tgz.sh
* harbour.spec
- Deleted support for harbour.cfg / compiler -go mode.
This was scheduled to be done after release, but since
hbmk2 seems to be a very solid tool now with visible
acceptance from users, it seems safe to make the move
now. This will mean that one less Harbour file will
"pollute" system locations, which is always a good
thing. Plus this part had a few bugs, which are now
also a thing of the past.
- examples/hbmake
- Deleted hbmake tool. This wasn't really working anyway,
and require -go mode, which was deleted.
Use hbmk2 instead.
* mpkg_src.sh
* mpkg_tgz.sh
! Fixed indentation to be consistent 4 chars.
* harbour/src/compiler/genc.c
* harbour/src/compiler/compi18n.c
* use "w' instead of "wb" in hb_fopen flags. It causes that in some
systems like DOS or Windows if CRTL supports it then all \n in
generated files will be automatically translated to native EOLs
(\r\n).
This modification should make .pot and .c files generated by
Harbour compiler more readable for DOS and Windows users.
* harbour/src/compiler/gencobj.c
! fixed wrong hb_fopen() flags 't' is not documented fopen() flag
so some systems may refuse to open files when it's used.
* harbour/src/rdd/dbfcdx/dbfcdx1.c
* removed old unused macros
* harbour/include/hbcompdf.h
* harbour/src/compiler/hbmain.c
* harbour/src/compiler/cmdcheck.c
* harbour/src/compiler/complex.c
* harbour/src/compiler/hbcomp.c
* harbour/src/compiler/gencobj.c
* harbour/src/compiler/hbusage.c
+ added support for -gd[.<destExt>] switch.
When used Harbour compiler generates also .d file with dependencies
list in the form like for make systems:
<destFile>: <sourceFiles,...>
optional .<destExt> parameter value can be used to replace default
extension in <destFile>.
Now users can generate .d files without additional overhead in the
same pass as normal compilation by simple adding -gd[.<destExt>]
switch to compilation command instead of executing harbour compiler
second time with -sm switch.
* harbour/doc/man/harbour.1
* updated man page
* harbour/utils/hbmk2/hbmk2.prg
* removed -kj switch - it's not longer necessary to improve -sm
* minor formatting
* harbour/src/compiler/cmdcheck.c
* minor formatting
* harbour/src/compiler/complex.c
% disabled lexer when -sm is used with -m switch.
In Harbour compiler lexer is only simple translator between PP and
grammar parser tokens so the overhead is rather small anyhow it
eliminates executing some unnecessary code.
If -sm switch is used then we need lexer to detect files included by
statements like:
DO <file> [WITH ... ]
_procReq_( <file> )
_procReq_( <file> + <ext> )
-m switch disable including such files so we can fully eliminate
lexer and preprocess PP tokens directly in a loop.
Now the cost of -sm switch is reduced to the PP cost plus some
minor static overhead.
* harbour/include/hbpp.h
* harbour/include/hbcompdf.h
* harbour/src/pp/ppcore.c
* harbour/src/compiler/hbmain.c
* harbour/src/compiler/cmdcheck.c
* harbour/src/compiler/ppcomp.c
* harbour/src/compiler/hbusage.c
* harbour/doc/man/harbour.1
+ added support for new compiler switch -sm which can be used to
generate dependencies list.
* modified HB_COMPILEBUF() function to return dependencies list
instead of .HRB file body when -sm switch is used. Files in
single module are separated by spaces and modules are separated
by TABs (chr(9))
To reduce overhead I suggest to use in programs like hbmk2
together with -sm also -kj switch - it disables some time
consuming optimizations in compiler code.
- source
+ src
* src/Makefile
* src/dynlib/mt/Makefile
* src/dynlib/Makefile
* INSTALL
* Makefile
* ChangeLog
* harbour.spec
* mpkg_tgz.sh
* Renamed 'source' dir to 'src' to move closer to other FOSS
projects. It's also easier to type, plus it has the side
effect that some cmdlines will be shorter in the
build process.
