* harbour/include/hbapifs.h
* harbour/source/common/hbfsapi.c
+ added hb_fsMaxFilesError()
* harbour/source/pp/ppcore.c
* harbour/utils/hbpp/hbppcore.c
* use hb_fsMaxFilesError() to avoid direct accessing of errno
value - some compilers/platforms do not support errno
* harbour/include/hbdate.h
* harbour/source/rtl/seconds.c
+ added hb_dateMilliSeconds()
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/idle.c
* harbour/source/rtl/inkey.c
* use hb_dateMilliSeconds() to avoid using clock_t clock()
some compilers/platforms do not support it
* harbour/include/hbwince.h
* harbour/source/common/hbwince.c
* disabled clock_t clock() emulation - it's not longer used
+ added some declarations for ANSI functions emulated by us
for WinCE and some defines - code sent by Marek Paliwoda
* harbour/include/hbwmain.c
* harbour/source/vm/mainwin.c
* always use unicode translations with WinMain() parameters for compilers
which do not set UNICODE macro for WinCE
* harbour/source/rtl/fserror.c
* do not include errno.h for HB_WIN32_IO - it's not necessary
* harbour/utils/hbver/hbverfix.c
* do not include errno.h for _MSC_VER and HB_WINCE builds
* harbour/contrib/libmisc/dates2.c
- commented DATETIME() function - this was not standard DATETIME()
value but raw ctime() function output and some compilers/platforms
do not support ctime()
* harbour/contrib/libnf/getenvrn.c
+ added HB_OS_WIN_32_USED
* harbour/contrib/mtpl.mak
* harbour/contrib/pdflib/pdflib.h
* replaced TABs with SPACEs
* harbour/include/hbsetup.ch
! reenabled HB_EXTENSION in default builds - disabling it makes
a lot of RDD code unusable and breaks default builds due to
insufficient dependences
* harbour/include/hbwince.h
* put functions declarations inside HB_EXTERN_BEGIN / HB_EXTERN_END
+ harbour/include/hbwmain.c
+ added WinMain() to main() wrapper
* harbour/include/hbexprb.c
* harbour/source/common/expropt1.c
! fixed typo reported by Chen
* harbour/source/pp/hbppgen.c
* harbour/source/main/harbour.c
* harbour/utils/hbpp/hbpp.c
* use hbwmain.c when main() is not supported by C compiler/platform
* harbour/source/rtl/gtwin/gtwin.c
* include wincon.h in all builds except LCC
* harbour/source/rtl/fserror.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/filesys.c
* use HB_OS_WIN_32_USED as in other files (still on TOFIX list)
* harbour/source/rtl/seconds.c
+ added HB_OS_WIN_32_USED
* harbour/source/compiler/hbcomp.c
! fixed typo: stderr was used instead of stdout
* harbour/contrib/bmdbfcdx/bmdbfcdx1.c
* replaced all direct access to hb_set structure with functions
Now it's possible to link bmdbfcdx with harbour.dll but because
it still access hb_cdp_page then only if linker supports auto
import conversions
* harbour/source/common/hbfsapi.c
* harbour/source/main/harbour.c
* harbour/source/pp/hbppgen.c
* harbour/utils/hbpp/hbpp.c
* added filename conversion (hb_fsNameConv()) to hb_fsFileExists()
function
* harbour/include/hbapifs.h
+ harbour/source/common/hbfopen.c
* harbour/source/common/Makefile
* harbour/common.mak
+ added hb_fopen() function - it's a wrapper to fopen() function but
calls internally hb_fsNameConv()
* harbour/source/pp/hbppgen.c
* harbour/source/pp/ppcore.c
* harbour/source/common/hbtrace.c
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/genc.c
* harbour/source/rtl/gtchrmap.c
* harbour/source/vm/fm.c
* use hb_fopen() instead of fopen()
* include/hbsetup.h
- Removed HOST_OS_UNIX_COMPATIBLE which was a misleading
alias for OS_UNIX_COMPATIBLE.
* source/compiler/hbcomp.c
% HOST_OS_UNIX_COMPATIBLE -> OS_UNIX_COMPATIBLE
* common.mak
* harbour-ce-spec
* make_xmingw.sh
* make_xmingwce.sh
* makefile.bc
* makefile.gc
* makefile.vc
* source/pp/Makefile
- source/pp/ppgen.c
+ source/pp/hbppgen.c
! executable ppgen renamed to hbppgen.
* samples/pe/editorlo.c
* samples/pe/pe.prg
+ samples/pe/bld_b32.bat
+ Added BCC build batch file.
! Fixed to compile under current Harbour.
! Fixed filename casing.
! Fixed several warnings (quite some signedness problem still remain).
; This is a very nice editor written in C (Harbour callable),
I think it is the work of Ryszard.
* samples/hscript/bld_b32.bat
* samples/hscript/hscript.prg
* samples/hscript/dir.hs
* samples/hscript/multiply.hs
* samples/hscript/ugly.hs
* samples/hscript/hello.hs
! Fixed build batch file.
! Fixed to use NFLib file IO rather than libmisc, because
latter was broken (it is a clone of the NFLib file IO).
! Fixed scripts to use Start instead of Main as an entry
point otherwise __hrbRun() got confused and called the
app Main().
! Fixed some other problems to make it run.
* harbour/bin/hb-mkslib.sh
* harbour/bin/pack_src.sh
* updated for recent Viktor's modifications
* harbour/source/rtl/oemansix.c
! added missing #include "hbpai.h"
* harbour/include/Makefile
+ harbour/include/hbwince.h
* harbour/include/hbrdddbf.h
* harbour/include/hbrdddbt.h
* harbour/include/hbdefs.h
* harbour/include/hbsetup.h
* harbour/include/hbrddcdx.h
* harbour/include/hbrddfpt.h
* harbour/contrib/xhb/hboutdbg.c
* harbour/contrib/xhb/hbsyslog.c
* harbour/contrib/xhb/xhbfunc.c
* harbour/contrib/libct/ctnet.c
* harbour/contrib/libct/files.c
* harbour/contrib/libct/disk.c
* harbour/contrib/libnf/getenvrn.c
* harbour/contrib/win32/tprinter.c
* harbour/contrib/win32/w32_ole.c
* harbour/contrib/win32/w32_prn.c
* harbour/contrib/odbc/odbc.c
* harbour/source/pp/ppgen.c
* harbour/source/rtl/diskspac.c
* harbour/source/rtl/gtclip.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/gtchrmap.c
* harbour/source/rtl/oemansi.c
* harbour/source/rtl/disksphb.c
* harbour/source/rtl/fssize.c
* harbour/source/rtl/hbffind.c
* harbour/source/rtl/filesys.c
* harbour/source/rtl/net.c
* harbour/source/rtl/gtgui/gtdef.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/vm/Makefile
* harbour/source/vm/mainwin.c
* harbour/source/vm/dynlibhb.c
+ harbour/source/vm/mainwin/Makefile
* harbour/source/common/Makefile
* harbour/source/common/hbgete.c
* harbour/source/common/hbver.c
+ harbour/source/common/hbwince.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbdot/hbdot.prg
* harbour/utils/hbver/hbverfix.c
+ added support for WinCE and PocketPC
+ harbour/make_xcemgw.sh
+ harbour/config/w32/cemgw.cf
* harbour/bin/hb-mkslib.sh
* harbour/bin/hb-func.sh
* harbour/bin/postinst.sh
+ added support for CeGCC-MinGW32 port - those of you who want to
create applications for WinCE on PockePC with ARM processors on
Linux or MS-Windows can download from SF cegcc-mingw32ce port.
User using RPM based Linux distribution for x86 CPUs can simply
download cegcc-mingw32ce-0.50-1.i586.rpm and install it.
The hb* scripts created by ./make_xcemgw.sh [tgz|gnu] are
automatically updated to work with CeGCC-MinGW32 so later you
can simply crate WinCE-ARM binaries using them as for native port.
I'm waiting for users feedback. Please remember that I'm not Windows
user and even this port was created without any Pocket machine.
With Marek Paliwoda help I only tested that final applications are
working using PocketPC emulator.
* harbour/source/rtl/errorapi.c
+ added protection against possible GPF when some assign methods
were called without parameters
* harbour/source/rdd/workarea.c
* initialize uiFalgs also when DBS_FLAGS is not set
* harbour/contrib/bmdbfcdx/bmdbfcdx1.c
* fixed hb_cdxSkipFilter() declaration - it should be 'static' function
* harbour/source/pp/ppcore.c
* harbour/source/compiler/ppcomp.c
+ added support for changing all -k? switches by #pragma, f.e.;
#pragma -ks+
#pragma -kM-
#pragma -kx1
#pragma -kJ0
* harbour/source/compiler/hbusage.c
* changed -ks description
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* do not generate error message for negative indexes and
[] operators are used for simple types when -ks option
is used
* harbour/include/hbvmpub.h
* harbour/include/hbapi.h
* harbour/source/vm/hvm.c
* harbour/source/vm/extend.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/memvars.c
+ added HB_IT_DEFAULT flags - it allows to check if item was changed
* harbour/source/vm/memvars.c
* harbour/include/hbvm.h
! fixed HB_IT_MEMOFLAG updating to be Clipper compatible. Here we are
not Clipper compatible in one place: in clodeblock local parameters
with memo values are marked as MEMO but if you leave function where
codeblock were created then Clipper during detaching removes MEMO
flag. In Harbour memo flag is kept.
* harbour/include/hbvm.h
* harbour/source/vm/classes.c
* harbour/source/vm/hvm.c
% improved speed of extended references used for SETGET methods
and overloaded [] operators
* harbour/include/hbapi.h
* harbour/include/hbsetup.ch
* harbour/source/compiler/hbcomp.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* harbour/source/vm/cmdarg.c
* removed HB_COMPAT_XHB flags - only one HB_COMPAT_XHB still exist
in HVM in hashes.c - it will be removed soon.
* harbour/source/common/hbverdsp.c
* removed information about xHarbour compatibility mode - it's not
longer used. We are emulating xHarbour behavior using external
XHB library and standard compiler/HVM features
* harbour/contrib/xhb/xhb.ch
* harbour/contrib/xhb/xhbfunc.c
* harbour/source/vm/arrayshb.c
* moved XHB_AINS(), XHB_ADEL() from XHB lib to HVM as HB_AINS(), HB_ADEL()
* harbour/contrib/xhb/xhb.ch
+ added #pragma -ks+
+ added transaltion for hb_enumindex( <enumvar> )
+ harbour/contrib/xhb/xhbenum.c
+ added emulation for HB_EUMMINDEX()
* harbour/contrib/xhb/xhbfunc.c
* do not add INET*() function wrappers for DOS builds or when
HB_NO_DEFAULT_INET macro is set
* harbour/contrib/xhb/xhbmsgs.c
* added comment
* harbour/contrib/Makefile
+ added TIP and XHB
* harbour/make_rpm.sh
* harbour/harbour.spec
* removed HB_COMPAT_XHB, --with tip, --with xhb
they are not longer necessary
* harbour/include/hbpp.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/source/pp/ppcore.c
* harbour/source/rtl/gttrm/gttrm.c
* harbour/source/main/harbour.c
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbcmplib.c
* harbour/source/compiler/ppcomp.c
* added 'const' to some 'char *' declarations
+ added hb_pp_inBuffer()
+ extended hb_compMain() to accept source code passed as ASCIIZ
string
+ .prg function HB_COMPILEFROMBUF()
+ added support for -q2 compiler switch - it disables _ALL_ stdout/stderr
messages
* harbour/utils/Makefile
+ harbour/utils/hbdot
+ harbour/utils/hbdot/hbdot.prg
+ harbour/utils/hbdot/Makefile
+ added hbdot utility program.
It's a "DOt Prompt" Console for the Harbour Language
Syntax: hbdot [<hrbfile[.prg]> [<parameters,...>]]
It should look and work in similar way to pp/xBaseScript
by Ron Pinkas but unlike xBaseScript is does not have preprocessor
or simulated runtime environment but simply uses Harbour pp and
compiler libraries to preprocess and compile commands. It means
that it supports all language constructions also statements, f.e.:
"for i:=1 to 10; ? i; next"
Additionally it can also compile and execute .prg files given as
first parameter just like hbrun.
Please test it. If it will work as expected then we can remove
'pp' (contrib/dot) from standard packages
* harbour/contrib/libnf/at2.prg
* harbour/contrib/libnf/min2dhm.prg
* harbour/contrib/libnf/ontick.c
* harbour/contrib/libnf/sqzn.prg
* harbour/contrib/libnf/bytexor.prg
* harbour/contrib/libnf/asum.prg
* harbour/contrib/libnf/sleep.prg
* harbour/contrib/libnf/any2any.prg
* harbour/contrib/libnf/origin.c
* harbour/contrib/libnf/mouse.c
* harbour/contrib/libnf/stod.c
* harbour/contrib/libnf/vertmenu.prg
* harbour/contrib/libnf/aredit.prg
* harbour/contrib/libnf/n2color.c
* harbour/contrib/libnf/xbox.prg
* harbour/contrib/libnf/hex2dec.prg
* harbour/contrib/libnf/getver.c
* harbour/contrib/libnf/Makefile
* harbour/contrib/libnf/invclr.prg
* harbour/contrib/libnf/popadder.prg
* harbour/contrib/libnf/d2e.prg
* harbour/contrib/libnf/anomatch.prg
* harbour/contrib/libnf/color2n.c
* harbour/contrib/libnf/datecnfg.prg
* harbour/contrib/libnf/easter.prg
* harbour/contrib/libnf/ntow.prg
* harbour/contrib/libnf/floptst.prg
* harbour/contrib/libnf/pchr.prg
* harbour/contrib/libnf/tbwhile.prg
* harbour/contrib/libnf/e2d.prg
* harbour/contrib/libnf/sysmem.prg
* harbour/contrib/libnf/dfile.prg
* harbour/contrib/libnf/clrsel.prg
+ harbour/contrib/libnf/fttext.c
+ harbour/contrib/libnf/putkey.c
* basic cleanup and syncing with some of xHarbour fixes and extensions.
I'd like to ask Windows users to update non GNU make file
* harbour/source/pp/ppcore.c
+ added support for .T., .F., .Y., .N. in PP and #IF ... / #ELIF ...
expressions. It was reported by Nick Van Dyck on xHarbour devel list
that old PP supported it. I haven't known that old PP suported .T.
and .F. in #IF directive. Please not that there are other diferences
between new PP and the old one in expresions which can be used in
#IF ... / #ELIF directives. New PP supports C like expressions with
support for pseudo functions like defined(), operates on integer
numbers only to not damage 64bit values during conversion to double
and keep C compatible results (the old one used double values) and
is much more restrictive in checking for valid expression.
* harbour/include/hbcompdf.h
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.y
! fixed using LOOP inside SWITCH/CASE.../END statement
! fixed possible memory leeks when compile time error appear
with some unfinished LOOP statements
! do not push unnecessary NIL on HVM stack when SWITCH/CASE.../END
statement were used without OTHERWISE clause
* harbour/source/pp/ppcore.c
! do not calculate last line when it does not contain any character
* clear line number counter after preprocessing standard definitions/
rules - I hope it will make David happy ;-)
* harbour/include/hbgtinfo.ch
+ added GTI_ADDKEYMAP and GTI_DELKEYMAP
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added const to declarations of some function parameters
* harbour/include/hbgtcore.h
* harbour/source/rtl/Makefile
+ harbour/source/rtl/gtchrmap.c
* harbour/source/rtl/gtcrs/Makefile
- harbour/source/rtl/gtcrs/chrmap.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtcrs/gtcrs.h
* hb_gt_chrmapinit() common function now for different GT drivers
* minor cleanup in GTCRS code
* harbour/include/hbcompat.ch
+ added some new translation rules
* harbour/include/hbapi.h
* cleanup comment
* harbour/source/pp/ppcore.c
! fixed line numbering when errors are reported in different order
due to preprocessing extended code block
+ harbour/source/rtl/gttrm
+ harbour/source/rtl/gttrm/Makefile
+ harbour/source/rtl/gttrm/gttrm.c
+ added new GT driver - it's terminal driver like GTCRS and GTSLN
but it does not use any external library like [N]CURSES or SLANG
so it can be compiled in nearly all POSIX systems. It's not such
flexible like curses or slang base drivers because instead of
using termcap/terminfo databases to extract terminal capabilities
it uses some hard coded sequences for few terminals (now Linux, ANSI,
XTERM) but it should cover users requests in 95% of cases. Terminals
I tested are quite well supported (GTTRM works even better then GTCRS
or GTSLN and is much faster in full screen mode - 2-4 times).
I noticed that most terminal emulators works much better with GTTRM
then with GTCRS or GTSLN due to limited list of used escape sequences
so some minor differences in each terminal implementation are not
noticeable. GTTRM automatically detects ISO/UTF8 terminal mode and
chose valid output what should also help *nix users.
Now I would like to ask BSD and MacOSX users to test GTTRM in these
systems with pure text console and XWindow terminal emulators. I'm
interesting in any problems you may found.
* harbour/source/vm/hvm.c
+ added protection for possible GPF caused by wrong .prg code
* harbour/source/vm/maindllp.c
% store function addreses in static variables to improved execution
speed
+ added support for compilers which does not use "_" as function prefix
+ added support for using with harbour*.dll
* harbour/source/vm/memvars.c
+ added new method of detaching enumerators and array item references
covered by HB_COMPAT_XHB macro. xHarbour does not work in such way
but the final results are similar.
* harbour/source/vm/dynlibhb.c
+ added protection against passing wrong pointer items to HB_LIB*()
functions
* harbour/source/common/reserved.c
* cleaned warning
* harbour/bin/hb-func.sh
* harbour/config/hpux/global.cf
* harbour/config/darwin/global.cf
* harbour/config/linux/global.cf
* harbour/config/sunos/global.cf
* harbour/config/bsd/global.cf
+ added GTTRM to library list
* harbour/include/hbcompat.ch
+ added translation rules for extended code blocks
* harbour/source/compiler/gencc.c
* cleaned C compiler warnings in -gc3 output and SWITCH <exp>
statement
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* allow to use 0d0 and 0d00000000 as empty date value
* harbour/source/pp/Makefile
* workaround for problems with some GNU make versions,
f.e. 3.76.1 on OS2
* harbour/make_xmingw.sh
* harbour/source/pp/Makefile
* recent xHarbour fixes for MinGW Linux->W32 cross build by Phil Krylow
with small modifications
* harbour/config/rules.cf
+ added rules for C++ files
* harbour/include/hbapi.h
* harbour/source/vm/arrays.c
+ added hb_arraySetForward()
* harbour/include/hbapi.h
* harbour/source/rtl/strmatch.c
+ added hb_strMatchFile() - compare two strings using platform dependent
rules for file matching, respects platform dependent wildcards
+ added hb_strMatchCaseWildExact() - compare two strings using pattern
with wildcard (?*) ignoring the case of the characters - patern have
to cover whole string
* changed hb_strMatchRegExp() to use real reguar expresions, if build
does not support regex then redirected to hb_strMatchWildExact()
- removed not longer used hb_strMatchDOS() - in fact it was neither DOS
nor classic wildcards (?*) compatible
* harbour/source/common/hbstr.c
! casting to avoid possible problem on platforms where toupper does not
accept negative char value
* harbour/include/hbcomp.h
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbmain.c
* minor modifications in cleanup functions
* harbour/source/rtl/hbffind.c
* use hb_strMatchFile()
* harbour/source/vm/memvars.c
* use hb_strMatchCaseWildExact() instead of hb_strMatchRegExp()
I still keep the hack which translates any mask starting with '*'
to "*" but if you think that we should fully respect wildcards
patterns then we should remove it from function hb_memvarGetMask()
Opinions?
* harbour/source/pp/ppcore.c
! fixed bug reported by Lorenzo
* harbour/contrib/rdd_ads/ads1.c
* changed static variable name from iSetListenerHandle to
s_iSetListenerHandle to keep common naming convention
* harbour/include/hbapi.h
* harbour/source/vm/hashes.c
* harbour/source/vm/hashfunc.c
* harbour/source/vm/hvm.c
+ added new 3-rd parameter to hb_hashGetItemPtr() to control
independently hash autoadd behavior in access/assign operation
* harbour/include/hbrdddbf.h
* harbour/include/hbrddntx.h
* harbour/source/rdd/dbfntx/dbfntx1.c
* moved static variables holding RDDI_* settings to RDDNODE data so
they can be set separately for each RDD which inherits from DBFNTX
* harbour/source/vm/classes.c
+ added disabled code to access hash items using messages
* harbour/source/vm/garbage.c
* comment
* harbour/include/hbclass.ch
* formatting
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
+ added support for:
#pragma escapedstrings = on
cStr := "some value with internal \" character"
#pragma escapedstrings = off
+ added support for multiline strings in escaped strings
* harbour/source/compiler/gencobj.c
* minor simplification
* harbour/source/rtl/hbffind.c
* always set hb_fsError()
* harbour/source/rtl/mlcfunc.c
! fixed minor typo
* harbour/TODO
* removed some not longer necessary TODO/TOFIX
* harbour/common.mak
* harbour/source/rtl/Makefile
- harbour/source/rtl/memoline.c
- harbour/source/rtl/mlcount.c
- harbour/source/rtl/mlctopos.c
- harbour/source/rtl/mlpos.c
- harbour/source/rtl/mpostolc.c
+ harbour/source/rtl/mlcfunc.c
* new version of memo line functions:
MEMOLINE(), MLCOUNT(), MLPOS(), MLCTOPOS(), MPOSTOLC()
* harbour/include/hbexpra.c
! fixed in HB_COMPAT_XHB build hb_enumIndex() used inside internal
FOR/NEXT loop
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
! removed some not longer necessary hack
% added some speed optimizations - it's not done in the way I want to
have in the final version but with some very small modifications it
should make people using a lot of #[x]translate (Enrico ;-)) happy.
* harbour/source/rtl/set.c
* minor cleanup in HB_SET_EOL initialization
* harbour/source/vm/hvm.c
* clean MEMO flag in array and hash items created by { MEMOFILED, ... }
or { "KEY" => MEMOFILED, ... } and optimized results of PLUS operation
* harbour/utils/hbtest/rt_misc.prg
* SET EOL to CHR(13) + CHR( 10 ) before MLCTOPOS() tests to avoid false
alarm on platforms with differ default EOL
* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbpp.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbmain.c
* harbour/source/pp/ppcore.c
+ added support for extended multiline codeblocks:
{ |<params,...>| <EOL>
<statement1>
...
<statementN>
return <val>
}
Such codeblocks allow nested definitions. They can also have their
own variable declarations (local, static, field, memvar, parameters,
private, public) and visibility of declared variables is similar to
nested function in Pascal but please note that there is one limitation
which exists also for normal codeblocks (Clipper compatible behavior):
internal codeblock local parameters and local variables cannot be
used in nested codeblocks, f.e. such code:
eval( { |p| eval( {|| qout( p + 1 ) } ) } )
is illegal in Clipper and Harbour. This limitation also can be
eliminated but but it will be necessary to make deeper modifications
in code for local detaching changing the method of generating
codeblocks local variables in nested blocks so unlike the above
also some modifications in HVM will be necessary.
Please test.
* harbour/include/hbcompat.ch
* always translate hash H*() function to HB_H*() ones even if
HB_COMPAT_XHB is set. Code which uses HB_H*() functions can
be linked with any Harbour builds
* harbour/include/hbapi.h
* harbour/source/vm/hashes.c
+ added hb_hashId()
* harbour/source/pp/ppcore.c
+ added #ytranslate, #ycommand, #yuntranslate, #yuncommand
case sensitive version of corresponding #x* directives
* harbour/source/rtl/itemseri.c
+ added support for serialization arrays and/or hashes with cyclic
references
* harbour/include/hbpp.h
* harbour/include/hbcomp.h
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/pplib.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbppdef.h
* changed error and warning messages to const char *
* harbour/source/compiler/genhrb.c
* rewritten to work on memory buffers and with new compiler code
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/source/compiler/hbmain.c
* harbour/source/main/harbour.c
+ added LANG_PORT_OBJ_BUF which allow to generate .hrb files into
memory buffers
* harbour/source/compiler/hbcmplib.c
+ added HB_COMPILEBUF() functions which returns compiled .hrb file
as string item
* harbour/source/vm/runner.c
+ added support for executing compiled .hrb files stored in string
items in __HRBRUN() function - it works just like in __HRBLOAD()
* harbour/harbour.spec
* harbour/utils/hbrun/hbrun.prg
+ added default include directories to hbrun
* use HB_COMPILEBUF() instead of HB_COMPILE() to eliminate temporary
files
* harbour/include/Makefile
+ harbour/include/hbchksum.h
* harbour/source/rtl/Makefile
+ harbour/source/rtl/hbadler.c
+ harbour/source/rtl/hbcrc.c
+ harbour/source/rtl/hbmd5.c
+ added functions to calculate different checksums
HB_ADLER( <cValue> [, <nStart> ] ) -> <nCC>
HB_CRC32( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC16( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC ( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_CRCCT( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_MD5( <cString> ) -> <cMD5>
HB_MD5FILE( <cFileName> ) -> <cMD5>
HB_CRC() is general CRC function which can be used for any polynomial
given as second argument, f.e.: 0x104C11DB7 is CRC32 polynomial,
0x18005 -> CRC16, 0x11021 -> CRC16 X.26, 0x1393 -> CRC12, 0x101 -> LCR8
HB_CRCCT() makes exactly the same job but it uses broken algorithm.
Unfortunately it seems that this broken version is widely used by many
other projects, f.e. HB_CRCCT() gives exactly the same results as
COM_CRC() from CT3. Generated results are usually "good enough" but
if you do not need compatibility with some other tools which uses
broken CRC algorithm then I suggest to not use it.
HB_ADLER() is ADLER32 check sum - this function gives the same results
as HB_CHECKSUM in xHarbour.
HB_MD5*() functions are from Dmitry V. Korzhov code modified a
little bit by me for other then x86@32 machines files and buffers
longer then 2^32. I also fixed possible problems with wrong results
in some cases.
* harbour/source/compiler/hbmain.c
* increase number of optimization passes
* harbour/source/pp/ppcore.c
* cleaned C compiler warning
* harbour/source/pp/ppcore.c
+ added support for multiline string concatenated by ';'
f.e.:
cVar := "line 1;
line 2;
line 3"
To enable the above it's necessary to build PP with
HB_PP_MULTILINE_STRING macro.
It's not Clipper compatible extension and it's not enabled by default
anyhow old PP worked in such way so I'm leaving the decision to Harbour
community if the above should be enabled by default or not.
* harbour/common.mak
* updated for new files - please check
* harbour/harbour.spec
* added compiler library
* harbour/bin/pack_src.sh
* harbour/bin/hb-func.sh
* updated for new files and libraries
* harbour/config/w32/mingw32.cf
* harbour/config/w32/watcom.cf
* harbour/config/w32/xcc.cf
* added winsock libraries
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added hb_cdpicmp() - not case sensitive version of hb_cdpcmp()
* harbour/include/hbapiitm.h
* harbour/source/vm/itemapi.c
+ hb_itemStrICmp(), hb_itemCopyFromRef(), hb_itemMoveFromRef()
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbvmpub.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/macro/macrolex.c
* harbour/source/vm/Makefile
* harbour/source/vm/arrays.c
* harbour/source/vm/asort.c
* harbour/source/vm/classes.c
* harbour/source/vm/eval.c
* harbour/source/vm/garbage.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/macro.c
+ harbour/source/vm/hashes.c
+ harbour/source/vm/hashfunc.c
+ added hash items, f.e.:
local h1 := {=>}, h2 := { "a"=>1.234, "b"=>2.345 }
? h2[ "a" ], h2[ "b ]
+ added support for DYNAMIC function declaration - it allow to define
functions which are lately bound at runtime, f.e.:
/*** t01.prg ***/
dynamic func1
proc main()
local h:=__hrbload("t02.hrb")
? func1()
return
/*** t02.prg ***/
func func1
return "Hello!!!"
% use new FUNCALL structure to hold EXTERNAL and DYNAMIC functions,
it reduce memory usage, FUNCALL is much smaller then FUNCTION
% use symbol scope bits when possible instead of making some linear scan
+ added new enumarator message: __ENUMKEY - it allow to access
key value when hash item is base enumerator value, f.e.:
proc main()
local v, h:={"a"=>1.000,"b"=>2.000,"c"=>3.000}
heval( h, { |k,v,i| qout( k, v, i ) } ); ?
for each v in h
? v, "=>", v:__enumKey(), v:__enumValue(), v:__enumIndex(), ;
valtype(v:__enumBase())
v += 0.123
next
? ;heval( h, { |k,v,i| qout( k, v, i ) } )
return
+ added C level hb_hash*() functions
+ added support for full HASH item cloning and updated array cloning
to also clone nested hashes - please note that xHarbour does not do
that, in xHarbour ACLONE() clones _ONLY_ nested arrays and HCLONE()
_DOES_NOT_ clone _ANY_ nested items.
* harbour/include/hbextern.ch
+ added hash functions HB_H*()
* changed INET*() functions to HB_INET*()
+ added hash functions H*() and socket functions INET*() when
HB_COMPAT_XHB is set
* harbour/include/hbtypes.h
+ added missing HB_EXTERN_BEGIN / HB_EXTERN_END
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
! added protection against automatic word concatenation in some cases
! fixed preprocessing expressions when match marker matches ';' token
* harbour/source/rtl/Makefile
+ harbour/source/rtl/itemseri.c
+ added functions for item serialization: HB_SERIALIZE() and
HB_DESERIALIZE() - these function are not binary compatible
with xHarbour functions with the same names but make very
similar job with the exception to serialization of codeblock
and object variables - Harbour does not allow to serialize
codeblocks and serialize objects as arrays.
In most cases these functions can replace the xHarbour ones
+ added HB_DESERIALBEGIN() and HB_DESERIALIZE() functions covered
by HB_COMPAT_XHB macro - this functions are only for compatibility
with existing xHarbour code, In Harbour HB_DESERIALBEGIN() is
dummy function which returns first parameter and HB_DESERIALNEXT()
is a simple wrapper to HB_DESERIALIZE() so it's not necessary to
use them.
* harbour/source/rtl/hbinet.c
* changed INET*() functions to HB_INET*() and enable them for default
build
+ added INET*() functions wrappers covered by HB_COMPAT_XHB macro
* harbour/source/rtl/hbrandom.c
+ added HB_RANDOMINT() - xHarbour compatible
* harbour/source/rtl/len.c
+ added support for HASHes
* harbour/source/rtl/valtype.c
+ added support for HASHes
+ added set of HB_IS*() functions - they are a little bit faster then
calling VALTYPE( v ) == <cVal>
- removed HB_ISBYREF() - this function cannot longer work, it was using
a Clipper incompatible anomalies in passing variables by reference I
fixed so it has to stop to work. If it will be realy necessary to
implement HB_ISBYREF() function then please inform me - it will have
to be done at compiler level or with some much deeper HVM stack
checking.
* harbour/source/vm/extend.c
! fixed hb_extIsArray() and hb_extIsObject() to work well with
parameters passed by reference.
Please note that now hb_extIsArray() return TRUE only for pure arrays
not object values.
* harbour/contrib/Makefile
+ harbour/contrib/tip/Changelog
+ harbour/contrib/tip/Makefile
+ harbour/contrib/tip/atokens.c
+ harbour/contrib/tip/base64x.c
+ harbour/contrib/tip/cgi.prg
+ harbour/contrib/tip/client.prg
+ harbour/contrib/tip/credent.prg
+ harbour/contrib/tip/cstr.prg
+ harbour/contrib/tip/encb64.prg
+ harbour/contrib/tip/encmthd.c
+ harbour/contrib/tip/encoder.prg
+ harbour/contrib/tip/encqp.prg
+ harbour/contrib/tip/encurl.prg
+ harbour/contrib/tip/ftpcln.prg
+ harbour/contrib/tip/hbhex2n.c
+ harbour/contrib/tip/httpcln.prg
+ harbour/contrib/tip/mail.prg
+ harbour/contrib/tip/popcln.prg
+ harbour/contrib/tip/smtpcln.prg
+ harbour/contrib/tip/tip.ch
+ harbour/contrib/tip/url.prg
+ harbour/contrib/tip/utils.c
+ added TIP library - code borrowed from xHarbour
Please test - a lot of above code is not well tested, also some peaces
were written over year ago for different things (f.e. serialization for
NETRDD) and now I collected them and committed.
The TIP library was not tested at all. It can be compiled but I cannot
say if it works - I hope that people familiar with it can make necessary
test and fixes.
It's also not the final version of low level HASH item code. I'm working
on more efficient structure which uses binary tries but I cannot say when
I'll finish it (maybe in this weekend or maybe in next year) so I committed
working version now even if I'm not happy with overall performance (BTW
not worser then in xHarbour)
* harbour/include/hbapi.h
* harbour/include/hbapiitm.h
* harbour/source/vm/garbage.c
* harbour/source/vm/extend.c
* harbour/source/vm/itemapi.c
+ added hb_gcFunc(), hb_parptrGC(), hb_itemGetPtrGC()
hb_parptrGC() and hb_itemGetPtrGC() uses GC cleanup function address
to validate if pointer item points to expected memory block type
* harbour/source/common/hbhash.c
* harbour/source/compiler/hbident.c
* formatting and minor modifications
* harbour/source/pp/pplib.c
* harbour/source/pp/pplib2.c
* use hb_parptrGC() to be sure that given pointer item points
to PP structure
+ harbour/include/hbregex.h
+ harbour/source/rtl/hbregex.c
* harbour/source/rtl/Makefile
* harbour/common.mak
+ added support for regular expressions. Now it's enabled by default
only in *nixes (POSIX regex) and BCC 5.5 (PCRE regex). Setting
HB_PCRE_REGEX macro enables Perl-Compatible Regular Expressions
and HB_POSIX_REGEX - POSIX regular expressions. In xHarbour regex
support is enabled for all builds because PCRE source code is stored
in CVS. If you will want we can make the same.
+ the following C functions are available:
hb_regexCompile(), hb_regexGet(), hb_regexFree(), hb_regexMatch()
+ the following PGR functions are available:
HB_REGEXCOMP(), HB_ISREGEX(), HB_ATX(), HB_REGEX(), HB_REGEXMATCH(),
HB_REGEXSPLIT(), HB_REGEXATX(), HB_REGEXALL()
They are working in similar way to the ones in xHarbour with the
exception to some bug fixes and form of compiled regular expression.
In Harbour it's pointer item for which HB_ISREGEX() returns TRUE when
in xHarbour it's binary string.
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
* enabled code to seek in index using regular expressions
(DBOI_SKIPREGEX[BACK])
* harbour/source/pp/ppcore.c
* clear included file counter in hb_pp_reset()
* insert space after stream comment /* */ - it's not Clipper
compatible but it's necessary as long as we have automatic
identifier concatenation
* harbour/include/hbclass.ch
* cleaned scope error message
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
* added hack for accepting expressions which start with ':' character
as regular/list match markers
* harbour/include/hbpp.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/pp/ppcore.c
* updated lexer to recognize IF(<exp1>,<exp2>,<exp3>) in expressions like
IF(<exp,...>) - it allow to make some grammar rules much more simple.
* harbour/include/hbstdgen.ch
* added #undef HB_COMPAT_XHB
* harbour/source/common/hbstr.c
* indenting
* harbour/source/compiler/ppcomp.c
* updated line numbering in #pragma dump code and error messages
executed for disabled code
* harbour/source/pp/ppcore.c
* changed the precedence of #pragma BEGINDIUMP/ENDDUMP - now
it has higher precedence then conditional compilation with
#IF[DEF]/#ENDIF
* added support for defined() pseudo function in #IF / #ELIF
directives, f.e.:
#if defined( __HARBOUR__ ) .and. !defined( HB_COMPAT_XHB )
#stdout "Harbour compiler compiled without xHarbour extensions."
#endif
* harbour/include/hbgtinfo.ch
* harbour/contrib/libct/ctwin.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
+ added support for GTI_FULLSCREEN, GTI_KBDSUPPORT, GTI_ISCTWIN
* harbour/source/rtl/hbgtcore.c
! fixed line and box drawing when the coordinates are out of screen size
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbpcode.h
* harbour/include/hbstack.h
* harbour/include/hbvm.h
* harbour/include/hbxvm.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/classes.c
* harbour/source/vm/estack.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
! added protection against cyclic references in arrays
* eliminated action parameter from hb_vmRequestReenter() /
hb_vmRequestRestore()
* moved s_lRecoverBase and s_uiActionRequest to HB_STACK structure
for future MT HVM version
+ added internal item structure hb_struRecover - it's not real item
but this structure is used to keep information about BEGIN SEQUENCE
data - it reduce HB_STACK usage
+ added support for ALWAYS clause in BEGIN SEQUENCE
The syntax is:
BEGIN SEQUENCE
<code>
[ RECOVER [ USING oErr ] ]
<recoverCode>
[ ALWAYS ]
<alwaysCode>
END [ SEQUENCE ]
It's guaranteed that <alwaysCode> is _ALWAYS_ executed even if
inside <code> or <recoverCode> some new exceptions like RETURN,
BREAK or QUIT will appear.
Please note that when the following code is executed:
BEGIN SEQUENCE
<code>
ALWAYS
<alwaysCode>
END
(without RECOVER clause) then BREAK exception inside <code> is not
recovered, <alwaysCode> is executed and then BREAK exception is
passed to outer BEGIN SEQUENCE. This is the same semantic as
used in TRY / [ CATCH ] / FINALLY / END
Those of you who prefer to use TRY / CATCH / FINALLY / END instead
of BEGIN SEQUENCE / RECOVER / ALWAYS / END can simply add to your
source code:
#command TRY => BEGIN SEQUENCE
#command CATCH [ oErr ] => RECOVER [ USING <oErr> ]
and:
errorBlock( {|oErr| break( oErr ) } )
Though instead of 'break( oErr )' I suggest to use some small function
which will support some basic recovery/substitute operations like in
default errorsys() and LockErrHandler() to not break existing code
which may depends on the default behavior.
If you want I can add direct support for TRY / CATCH / FINALLY / END
but I'm not sure it's really necessary.
Please note also that in Harbour ALWAYS code is execute even for QUIT
excpetion.
When <alwaysCode> is executed current exception is stored and restored
when is finished. If new exception appears inside <alwaysCode> then
restored exception depends on the priority in the following order:
QUIT // highest priority
BREAK
RETURN
If both exceptions have the same priority and contain additional value
(error object in BREAK or return value in RETURN) then the recently set
one is restored. It's similar behavior to destructor code.
* harbour/source/common/hbstr.c
* moved one character length string table (hb_szAscii) from hvm.c
to use it also in compiler and preprocessor
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/pplib.c
* tuned error messages to be more Clipper compatible
% use static strings from hb_szAscii
* harbour/source/rtl/alert.prg
* use hb_gtInfo( GTI_FULLSCREEN ) to detect type of GT driver
! some minor fixes
TOFIX: we have to also use GTI_ISCTWIN or add window allocation
to standard GT drivers to be Clipper compatible when CTWIN
is used - In Clipper Tools ALERT() works in differ way then
the standard one. It creates separate window box to display
data, supports SETKEY(), etc. I'll think about adding some
extended support for ALERT() and similar operations (f.e.
separate debugger windows) to GT API so it will be also
possible to overload standard alert() command by GUI message
box in GTGUI and similar GT drivers.
* harbour/source/rtl/binnumx.c
! fixed U2BIN() - wrong casting
* harbour/config/bsd/gcc.cf
* harbour/config/darwin/gcc.cf
* harbour/config/dos/bcc16.cf
* harbour/config/dos/djgpp.cf
* harbour/config/dos/owatcom.cf
* harbour/config/dos/rsx32.cf
* harbour/config/hpux/gcc.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/owatcom.cf
* harbour/config/os2/gcc.cf
* harbour/config/os2/icc.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/bcc32.cf
* harbour/config/w32/gcc.cf
* harbour/config/w32/mingw32.cf
* harbour/config/w32/msvc.cf
* harbour/config/w32/rsxnt.cf
* harbour/config/w32/watcom.cf
* added respecting HB_GT_DEFAULT, though it's quite possible that I'll
remove it at all soon.
* some other cleanup
* harbour/source/compiler/complex.c
! fixed wrongly replicated from FLEX lexer condition used to DECLARE.
Now they should be the same as in FLEX lexer but IMHO they are not
Clipper compatible.
* harbour/source/compiler/gencli.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genjava.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
* harbour/source/rtl/hbffind.c
* harbour/source/pp/ppcore.c
* harbour/source/rdd/workarea.c
! fixed sizes of some C stack buffers and strncpy() parameters
* use hb_strn*() instead of strn*() in few places to be sure that 0
is always stored in destination buffer
* harbour/source/rtl/gtcgi/gtcgi.c
* change reported GT name from "Standard stream console" to
"Raw stream console" to make it differ then GTSTD one.
* harbour/bin/hb-func.sh
* harbour/bin/hb-mkslib.sh
* harbour/bin/postinst.sh
* harbour/config/bsd/gcc.cf
* harbour/config/darwin/gcc.cf
* harbour/config/dos/owatcom.cf
* harbour/config/hpux/gcc.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/owatcom.cf
* harbour/config/os2/gcc.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/watcom.cf
* harbour/contrib/rdd_ads/ads1.c
* harbour/contrib/rdd_ads/adsfunc.c
* harbour/include/hbapifs.h
* harbour/include/hbexprc.c
* harbour/include/hbsetup.h
* harbour/source/common/expropt2.c
* harbour/source/common/hbdate.c
* harbour/source/common/hbgete.c
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
* harbour/source/common/hbverdsp.c
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/fixflex.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbfunchk.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/ppgen.c
* harbour/source/pp/pplib.c
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/workarea.c
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* harbour/source/rdd/hsx/hsx.c
* harbour/source/rtl/accept.c
* harbour/source/rtl/ampm.c
* harbour/source/rtl/console.c
* harbour/source/rtl/defpath.c
* harbour/source/rtl/errorint.c
* harbour/source/rtl/filesys.c
* harbour/source/rtl/fkmax.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/hbffind.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/langapi.c
* harbour/source/rtl/seconds.c
* harbour/source/rtl/set.c
* harbour/source/rtl/tobject.prg
* harbour/source/rtl/transfrm.c
* harbour/source/rtl/gtcrs/chrmap.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtcrs/gtcrs.h
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
* harbour/source/vm/classes.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/debug.c
* harbour/source/vm/estack.c
* harbour/source/vm/fm.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* harbour/source/vm/proc.c
* harbour/source/vm/runner.c
* harbour/utils/hbmake/hbmlang.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/pragma.c
* harbour/utils/hbver/hbverfix.c
* general code cleanup: all strcpy() and strcat() replaced hb strn*()
and hb_strn*(), sprintf() by snprintf(), etc.
It fixed some possible buffer overflow but it's also possible that
it will exploit some some hidden so far problems but I strongly
prefer to know about them ASAP to fix them before final 1.0 release.
! fixed bug I introduce in codeblock falgs which disabled early macro
evaluation in codeblocks.
! added missing protection against execution by bison destructor for
used CBSTART token on syntax error.
% use PP stringify logik added for FLEX support to remove all redundant
spaces in stringified for early macro evaluation codeblocks and add
spaces between operators if after preprocessing they were removed.
Now we are supporting also some code which cannot be compiled by
Clipper.
% cleaned and improved the speed of printer redirecting in console code.
Chen please check if CG still reports problems and if not ubdate
TODO/TOFIX or inform me about them.
* some cleanups in building process for different *nixes: MacOSX, SunOS,
*BSD, etc.
* removed not longer necessary (I hope) compiler flag to force default
'char' type as signed. Now Harbour should work with signed and unsigned
char without any problems. To other developers: please remember that
when you are using 'char' as 8 bytes signed integer then it's a bug.
Always explicitly use: 'signed char' in such case. On some platforms
it's not possible to set default type for 'char' so if you hardcode
that 'char' is signed or unsigned somewhere then code will not be
portable. Chen if you will find a while to also rebuild Harbour with
BCC and -K switch to make some tests with CG then I'll be thankful.
* harbour/bin/pack_src.sh
+ added packing *.yy[ch] files
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbpp.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbgenerr.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/pp/ppcore.c
+ added hb_comp prefix to grammar/lexer compiler public functions to
reduce possible conflict with 3-rd party code which may use default
yy prefix.
! do not use bison destructors for expressions. Internal bison logic
cannot properly detect if expression was used or not in some of our
grammar rules and it's possible that some expressions will not be freed
and some other freed twice.
! added protection against multiple destructors execution for CBSTART
and LITERAL tokens
* added small garbage collector for deallocating expressions which were
not freed (such situation can happen in syntax errors)
% some optimizations in used structures to reduce their sizes
+ added protection against execution PCODE optimizations for functions
which were not cleanly compiled.
* harbour/source/rtl/idle.c
* use const in nanosec() timeout declaration
* harbour/config/bsd/gcc.cf
* harbour/config/darwin/gcc.cf
* harbour/config/dos/djgpp.cf
* harbour/config/dos/owatcom.cf
* harbour/config/hpux/gcc.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/owatcom.cf
* harbour/config/os2/gcc.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/bcc32.cf
* harbour/config/w32/gcc.cf
* harbour/config/w32/mingw32.cf
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbver.h
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genjava.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
- harbour/source/compiler/harbour.simple
- harbour/source/compiler/harbour.slx
- harbour/source/compiler/harbour.sly
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbgenerr.c
- harbour/source/compiler/hbslex.c
- harbour/source/compiler/hbstrong.c
* harbour/source/compiler/hbusage.c
- harbour/source/compiler/simplex.c
* harbour/source/macro/Makefile
- harbour/source/macro/macro.slx
- harbour/source/macro/macroslx.c
* harbour/source/pp/ppcore.c
* harbour/utils/hbpp/hbppcomp.c
- removed SIMPLEX references
! fixed memory leak in request _GET_
* use hb_compIdentifiersNew() in INLINE and AUTOOPEN structures
members
* eliminated all internal exit() calls. Now hb_compGenError() with
fatal errors does not interrupt application but only sets
HB_COMP_PARAM->fExit = TRUE;
What should cause silent clean application close.
Please keep it in mind making future modifications and do not
introduce and exit() function call.
+ added support for \x<hex> and \<oct> quoting in extended strings
(just like in C). Warning !!!. Embedded 0 bytes are supported by
PP, lexer and expression optimizer but not by bison. To make them
working it will be necessary to change Literal terminal symbol
holder and add length field in bison rules and also change the hash
table used to hold identifiers, literals and macros to store and use
real string length. If someone will try to use strings with embedded
0 now then they will be cut but nothing worser should happen.
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
+ harbour/include/hbcompdf.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbpp.h
* harbour/include/hbvm.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genjava.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbfunchk.c
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hbident.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/ppcomp.c
* harbour/source/macro/macro.y
* harbour/source/pp/ppcore.c
* harbour/source/pp/ppgen.c
* harbour/source/pp/pplib.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/estack.c
* harbour/source/vm/fm.c
* harbour/source/vm/macro.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbpp.h
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/pragma.c
* changed the internal compiler API to be MT safe.
All global and static non constant variables replaced by
HB_COMP structure which have all compiler context settings.
It's possible to allocate simultaneously many compiler contexts
and compile code. Only constant/read only variables are shared.
In macro compiler HB_COMP is replaced by HB_MACRO.
In source code I everywhere used to macros: HB_COMP_DECL and
HB_COMP_PARAM which are equivalents of old HB_MACRO_DECL and
HB_MACRO_PARAM definitions.
We will only have to change compiler FATAL errors support to
not execute exit() for non batch systems.
* make macro compiler fully MT safe
* removed not longer used definitions and variables
! add direct accessing to PP line number information - it fixes missing
line numbers reported recently
! added generating .ppo files when tokens are teken directly by compiler
- it fixes empty .ppo file problem
! clear hb_stack internall variables after removing hb_stack to avoid
possible GPF if application still works and try to access unexsiting
hb_stack
! do not allocate new memory block when final FM statistic report is
generated - it fixes problem with GPF when application compiled with
FM statistic exits and CLIPPER envvar is set.
! fixed memory leak hb_cmdargCheck()
! added to harbour.y symbol destructors - it should fixes memory leaks
in syntax errors but it uses quite new bison feature which is not
fully supported yet. Unfortunately it's also not MT safe and the
destructors implementation in 1.875c does not respect %parse-param.
Bison documentation says that it should so I hope it will be fixed
soon (or maybe even already is in the newest bison versions) before
I'll add multi context compilation support. If not then I will have
to add some workaround. I can pass compiler context pointer inside
YYSTYPE using hack in a lexer but it will force really huge number
modifications in existing bison rules so probably it will be much
easier to fix bison or write a small tool to update generated parser.
* other modifications - the total size of patch is nearly 1MB and
detail description will have to take me few days.
* harbour/common.mak
* harbour/source/compiler/Makefile
* harbour/include/hbcomp.h
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.slx
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hbident.c
* harbour/source/compiler/ppcomp.c
+ harbour/source/compiler/complex.c
+ added new PP based compiler lexer - it's smaller, MT safe and a
little bit faster then then the FLEX version.
+ added HB_COMP structure to hold compiler data in future MT version
+ added global variable HB_COMP_PTR hb_comp_data to make conversion
to MT easier - now it holds only PP and lexer data.
* update PP related code in compiler to be MT safe
+ added %pure-parser, %parse-param and %lex-param for bison to generate
MT safe grammar parser.
* updated FLEX to work with recent compiler modifications and pure-parser
bison API
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/source/macro/Makefile
* harbour/source/macro/macro.l
* harbour/source/macro/macro.y
* harbour/source/macro/macrolex.c
* use hb_macro prefix instead of hb_comp in bison/flex parser/lexer
used in macro compiler to avoid possible conflicts in the future
* separated lexer data
* harbour/include/hbapi.h
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
* harbour/source/pp/ppgen.c
* harbour/source/pp/pplib.c
* harbour/source/vm/macro.c
* removed not used members from HB_MACRO structure to make it
cleaner before creating common to compiler and macro compiler
structure
+ added new token HB_PP_TOKEN_EPSILON
+ added void * cargo parameters passed to executed user functions
+ hb_pp_tokenGet(), hb_pp_tokenToString(), hb_pp_tokenBlockString()
functions for new PP based compiler lexer
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbpp.h
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/pragma.c
* updated to compile with recent compiler header file modifications
PP, new lexer and most of grammar parser should be MT safe. Now we should
update all compiler functions to pass pointer to HB_COMP data structure
where we should all current global variables. This structure as first
member should have HB_CMPCOMMON structure which will hold common to
compiler and macro compiler data. Ryszard I think you are the best person
to define this structure.
We have new lexer which is MT safe but please note that it has to be
extensively tested so I would like to ask everybody to compile as much
as possible different code and check if the final programs work as
expected. Working on new code I removed some limitations existing in
FLEX though not all. At the beginning I tried to replicate the exact
FLEX behavior but I've found that in few places it does not work as
it should so I begin to encode rules in a way which remove some
limitations. In fact now it's much easier to control some things.
I kept the FLEX code working and made all necessary modifications
so it still can be used but keeping FLEX working cost us IMHO too
much. It's not possible to introduce some improvements to grammar
parser. All identifiers, keyword and macros returned by new lexer
are converted to upper letters, do not have to be freed by hb_xfree()
and is guarantied that will be always accessible. So from grammar file
we can remove all hb_compIdentifierNew( hb_strupr($1), TRUE ) what
should give noticeable speed improvement but will break the FLEX code.
Ryszard and other you will have to decide if we will support FLEX in
the future. We can also clean the code and remove most of other
redundant hb_strupr() and hb_strdup() used in many places. BTW only
one terminal symbol can be returned with lower letters: DOIDENT
and I make it intentionally so it's possible to use:
DO prog1 WITH "sth"
on case sensitive file systems so this symbol should be cloned in
upper cases as function symbol but used without modification as
file name. It's current behavior but I'm not sure you will want
to keep it. Maybe compiler switch to always convert file names
created from
DO <id> [WITH <params,...>]
to lower cases will be better. Please think about it.
* harbour/source/pp/ppcore.c
! fixed casting - it resolves problem reported by Alexander with
preprocessing chr(255) from static buffer (PP used by .prg code)
* harbour/source/macro/macro.y
+ added some comments
* harbour/source/macro/Makefile
* commented out compilation of FLEX based lexer for macro compiler and
added compilation of new small lexer written in pure .c
* harbour/common.mak
* replaced macrol.obj by macrolex.obj
+ harbour/source/macro/macrolex.c
+ new small lexer written in pure .c. The code is much smaller,
MT safe and more friendly for grammar parser. I think it should
be also faster but I haven't made any tests yet. When we update
grammar parser to not free string representation of terminal
symbols then we should expect some farther speed improvement,
it will also resolve some set of memory leaks like in:
type("user input")
and will allow to make some parts of grammar parser common to
compiler and macro compiler by removing #if[n]def HB_MACRO_SUPPORT
* harbour/source/common/hbstr.c
! fixed decoding strings without trailing ASCII NUL character in
hb_strRemEscSeq()
* harbour/source/pp/ppcore.c
+ added decoding C escaped strings (e"...") to PP so they can be
preprocessed like a normal strings, it's not enabled when
HB_C52_STRICT macro is set
* harbour/include/hbapi.h
* harbour/source/common/hbstr.c
* harbour/source/compiler/harbour.l
* harbour/source/macro/macro.l
* harbour/source/macro/macro.slx
* harbour/source/compiler/harbour.slx
* changed parameters in function: hb_compStrToNum() now the string
size is passed explicitly so it can work with strings which does
not have trailing ASCII NUL character.
* harbour/source/macro/macro.y
* indenting
* harbour/include/hbmacro.h
* harbour/source/common/hbstr.c
* harbour/source/macro/macro.l
* harbour/source/macro/macro.y
* added two new functions for macro compiler: hb_macroLexNew() and
hb_macroLexDelete() to clearly separate lexer from grammar parser.
* harbour/source/compiler/harbour.l
* harbour/source/common/hbstr.c
* harbour/source/pp/ppcore.c
* added error generation for wrong e"..." strings and fixed \" quoting
* removed \q quoting
* harbour/source/pp/ppcore.c
* harbour/source/pp/ppgen.c
* added small description in headers
* harbour/common.mak
* harbour/source/pp/Makefile
* harbour/source/pp/pplib.c
+ harbour/source/pp/pplib2.c
* harbour/include/hbextern.ch
+ added auto destructor for allocated PP context, it's not longer
necessary to execute __PP_FREE() so this function was moved from
the standard .prg API to file with backward compatible functions
* changed __PREPROCESS() to __PP_PROCESS()
* moved setting std rules to separate file so now if user uses PP
with only his own rules we are not forcing linking static tables
which are quite huge (over 100kb)
To include stdandard rules in static binaries user should add
to his code:
REQUEST __PP_STDRULES
+ harbour/source/pp/pplib3.c
* old PP functions for backward compatibility:
__PPADDRULE(), __PREPROCESS(), __PP_FREE()
Please note that using this function is not MT safe. They should
work like with old PP code. Using any of this function automatically
forces linking __PP_STDRULES
