* contrib/hbnetio/hbnetio.hbx
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/readme.txt
+ added new client side function:
netio_TimeOut( <pConnection> [, <nTimeOut>] ) -> [<nTimeOut>]
Get/Set client side timeout for messages
+ inherit timeout used in socket connection and use it for farther
message processing.
Warning: incompatible, for slow connections or time consuming RPC
functions people should set timeout using netio_TimeOut()
function. In previous version timeout was set to -1 what
means wait forever without any time limits or until
connection is broken.
* contrib/hbnetio/netiosrv.c
* fully consume RPC messages even if RPC is disabled. It allows to
continue client connection in such case and process next messages.
* contrib/hbnetio/netiosrv.c
! fixed very bad bug in one of recent modifications which completely
broke all servers using early authentication by netio_VerifyClient()
* include/hbapifs.h
* src/rtl/filebuf.c
* src/rtl/filebufd.c
* contrib/hbcomio/comio.c
* contrib/hbmemio/memio.c
* contrib/hbnetio/netiocli.c
* contrib/hbtcpio/tcpio.c
* changed internal FILE IO API. Now all functions which do
not operate on PHB_FILE receive pointer to function table
(PHB_FILE_FUNCS) used by given redirector.
* src/rtl/vfile.c
* open wirtual files in READWRITE mode by default
* translate FO_* attributes to FXO_* ones
* src/vm/classes.c
! fixed typo in RTE message
* src/vm/garbage.c
* use different error code (1301/1302) for destructor RTE
* src/rtl/gtxwc/gtxwc.c
* src/rtl/gtxwc/gtxwc.h
+ added support for HB_GTI_FONTWEIGHT with HB_GTI_FONTW_* actions
* contrib/hbpgsql/rddcopy.c
! fixed memory leak
% encapsulate PQ calls in hb_vmUnlock()/hb_vmLock() to not stop
other threads when GC is activated
* src/vm/set.c
! fixed freed memory access exploited by interactions between
modifications in last few years.
! do not try to remove trailing ^Z char reading from the stream
if FS_END seek reports 0.
! if possible open printer/alternate/extra output in write only mode
to avoid problem on devices where read access is not available.
* src/rtl/langapi.c
* keep EN lang active after deinitialization
* src/rtl/filesys.c
! fixed condition for file time refresh in *nix builds
! fixed file time setting in *nix builds
* include/hbapifs.h
* src/rtl/Makefile
* src/rtl/filebuf.c
+ src/rtl/filebufd.c
* renamed hb_fileRegister2() to hb_fileRegisterFull()
+ added new function hb_fileRegisterPart() which simplifies writing
small FILE IO redirectors.
* contrib/hbmemio/memio.c
* contrib/hbnetio/netiocli.c
* use hb_fileRegisterFull()
* contrib/hbplist.txt
+ contrib/hbtcpio/hbtcpio.hbc
+ contrib/hbtcpio/hbtcpio.hbp
+ contrib/hbtcpio/hbtcpio.hbx
+ contrib/hbtcpio/tcpio.c
+ added new Harbour FILE IO redirector.
It recognizes and process names with "tcp:" prefix, in form like:
tcp:<host>:<port>[:<timeout>]
It can be used in different subsystems using Harbour FILE IO and
stream read/write operations, i.e.
REQUEST HB_TCPIO
SET PRINTER TO tcp:192.168.0.110:9100
can be used to connect to network printers using TCP direct printing.
* utils/hbmk2/po/hbmk2.pt_BR.po
! fixed typo in translation
* include/hbchksum.h
* src/rtl/hbmd5.c
* changed C function:
void hb_md5file( HB_FHANDLE hFile, char * digest )
to
HB_BOOL hb_md5file( const char * pszFileName, char * digest )
Warning: [INCOMPATIBLE]
* src/rtl/copyfile.c
* src/rtl/fscopy.c
* src/rtl/hbmd5.c
* src/rtl/isprint.c
* src/rtl/memofile.c
* changed hb_fs*() API to hb_file*() API
* contrib/hbnetio/netiocli.c
! fixed GPF when non attributes are passed to hb_fileDirectory()
redirected to NETIO - thanks to Rolf for the info about the problem.
* contrib/hbnetio/netiosrv.c
! allow to pass empty directory to hb_fileDirectory() redirected to NETIO
* ChangeLog.txt
* include/harbour.hbx
* src/rtl/Makefile
- src/rtl/xfile.c
+ src/rtl/vfile.c
* renamed PRG functions HB_X*() to HB_VF*()
* renamed PRG functions hb_vf[GS]etAttr() to hb_vfAttr[GS]et()
* renamed PRG functions hb_vf[GS]etDateTime() to hb_vfTime[GS]et()
* include/hbapifs.h
* src/rtl/filebuf.c
* src/rtl/fscopy.c
* contrib/hbmemio/memio.c
* contrib/hbnetio/netio.h
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/netiosrv.c
* renamed C functions hb_file[GS]etAttr() to hb_fileAttr[GS]et()
* renamed C functions hb_file[GS]etFileTime() to hb_fileTime[GS]et()
* contrib/hbnetio/netio.h
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/netiosrv.c
+ added support for redirecting hb_vfConfig() to the server.
NETIO does not use it anyhow NETIO works as full redirector
to server system and it may be used on the server side.
* contrib/hbhpdf/3rd/libhpdf/hpdffdfj.c
! removed executable attribute
* src/vm/thread.c
! fixed typo reported by Viktor - thanks.
* include/hbapifs.h
* src/rtl/hbproces.c
* src/rtl/spfiles.c
* src/rtl/filesys.c
* src/rtl/file.c
* synced parameter file and dir names used in declarations and
implementations
* include/hbrddcdx.h
+ added few fields used in ADI files
* src/codepage/cp_utf8.c
* src/rtl/cdpapi.c
! always return -1, 0 and 1 from hb_cdpcmp() function.
Workaround for problem exploited by optimized memcmp() function.
* src/rdd/dbfntx/dbfntx1.c
! fixed possible sort problem when optimized memcmp() is used
* added feew missing const declarations
* src/rdd/dbfntx/dbfntx1.c
* src/rdd/dbfnsx/dbfnsx1.c
* src/rdd/dbfntx/dbfntx1.c
! fixed OrdWildSeek() to work with optimized memcmp()
* include/hbapifs.h
* src/rtl/disksphb.c
+ added new C function:
double hb_fsDiskSpace( const char * pszPath, HB_USHORT uiType );
* include/hbapifs.h
* src/rtl/direct.c
+ added new C function:
PHB_ITEM hb_fsDirectory( const char * pszDirSpec,
const char * pszAttributes );
* src/rtl/filesys.c
! report EOF in hb_fsEof() also when file position is out of file size
* updated comment
* include/hbapifs.h
* src/rtl/filebuf.c
+ extended Harbour FILE IO API and added support for read/write filepos,
directory and link operations.
Read/write filepos support in some systems (i.e. *nixes) needs additional
emulation code. If it's not necessary then this functionality can be
disabled by FXO_NOSEEKPOS attribute. Now this attribute is used by our
RDD code.
* src/rtl/Makefile
+ src/rtl/xfile.c
+ added PRG interface to Harbour FILE IO API
The following PRG functions are available for Harbour programmers:
HB_XEXISTS( <cFileName>, [ @<cDestFileName> ] ) -> <lOK>
HB_XERASE( <cFileName> ) -> <nResult>
HB_XRENAME( <cFileSrc>, <cFileDst> ) -> <nResult>
HB_XCOPYFILE( <cFileSrc>, <cFileDst> ) -> <nResult>
HB_XDIREXISTS( <cDirName> ) -> <lExists>
HB_XDIRMAKE( <cDirName> ) -> <nSuccess>
HB_XDIRREMOVE( <cDirName> ) -> <nSuccess>
HB_XDIRECTORY( [ <cDirSpec> ], [ <cAttr> ] ) -> <aDirectory>
HB_XDIRSPACE( <cDirName>, [ <nInfoType> ] ) -> <nFreeSpace>
HB_XGETATTR( <cFileName>, @<nAttr> ) -> <lOK>
HB_XSETATTR( <cFileName>, <nAttr> ) -> <lOK>
HB_XGETDATETIME( <cFileName>, @<tsDateTime> ) -> <lOK>
HB_XSETDATETIME( <cFileName>, <tsDateTime> ) -> <lOK>
HB_XLINK( <cExistingFileName>, <cNewFileName> ) -> <nSuccess>
HB_XLINKSYM( <cTargetFileName>, <cNewFileName> ) -> <nSuccess>
HB_XLINKREAD( <cFileName> ) -> <cDestFileName> | ""
HB_XOPEN( <cFileName>, [ <nMode> ], [ <nAttr> ] ) -> <pHandle> | NIL
HB_XCLOSE( <pHandle> ) -> <lOK>
HB_XLOCK( <pHandle>, <nStart>, <nLen>, [ <nType> ] ) -> <lOK>
HB_XUNLOCK( <pHandle>, <nStart>, <nLen> ) -> <lOK>
HB_XLOCKTEST( <pHandle>, <nStart>, <nLen>, [ <nType> ] ) ;
-> <nPID> | 0 (nolock) | -1 (err)
HB_XREAD( <pHandle>, @<cBuff>, [ <nToRead> ], [ <nTimeOut> ] ) ;
-> <nRead>
HB_XWRITE( <pHandle>, <cBuff>, [ <nToWrite> ], [ <nTimeOut> ] ) ;
-> <nWritten>
HB_XREADAT( <pHandle>, @<cBuff>, [ <nToRead> ], [ <nAtOffset> ] ) ;
-> <nRead>
HB_XWRITEAT( <pHandle>, <cBuff>, [ <nToWrite> ], [ <nAtOffset> ] ) ;
-> <nWritten>
HB_XSEEK( <pHandle>, <nOffset>, [ <nWhence> ] ) -> <nOffset>
HB_XTRUNC( <pHandle>, [ <nAtOffset> ] ) -> <lOK>
HB_XSIZE( <pHandle> ) -> <nSize>
HB_XEOF( <pHandle> ) -> <lEOF>
HB_XFLUSH( <pHandle>, [ <lDirtyOnly> ] ) -> NIL
HB_XCOMMIT( <pHandle> ) -> NIL
HB_XCONFIG( <pHandle>, <nSet>, [ <nParam> ] ) -> <nResult>
HB_XHANDLE( <pHandle> ) -> <nOsHandle>
HB_XTEMPFILE( @<cFileName>, [ <cDir> ], [ <cPrefix> ], [ <cExt> ], ;
[ <nAttr> ] ) -> <pHandle> | NIL
Please remember that not all redirectors have to support all of them.
I.e. MEMIO allows to use directory names in files but does not allow to
create or remove directories. It also does not support file attributes
and times in current implementation though it can be easy added.
HB_XCONFIG() is general function which can be used by redirector
authors to make some special operations which are specific to given
device.
HB_XTEMPFILE() always creates temporary files on local system without
switching to FILE IO redirector. It's intentional behavior.
* src/rtl/fscopy.c
* used Harbour FILE IO API in hb_fsCopy()/HB_FCOPY()
Please remember that HB_FCOPY() always makes operation using current
system when HB_XCOPY() may optimize it moving the operation to low
level subsystem or even other computer i.e. NETIO can do that when
both files are located on the same server.
* src/rdd/delim1.c
* src/rdd/sdf1.c
* src/rdd/dbf1.c
* src/rdd/dbfcdx/dbfcdx1.c
* src/rdd/dbffpt/dbffpt1.c
* src/rdd/dbfnsx/dbfnsx1.c
* src/rdd/dbfntx/dbfntx1.c
* src/rdd/hsx/hsx.c
* open files with FXO_NOSEEKPOS attribute to inform low level API that
read/write filepos is not used (disables unnecessary filepos emulation).
* contrib/hbnetio/netio.h
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/netiosrv.c
+ added support for extended Harbour FILE IO API.
* contrib/hbnetio/utils/hbnetio/netiomgm.hb
! renamed "quit" command to "shutdown" as suggested by Rolf.
* contrib/hbnetio/utils/hbnetio/hbnetio.prg
* allow to interrupt server process using ESC when run in console window.
* contrib/hbmemio/memio.c
+ added support for extended Harbour FILE IO API.
I left two minor TODO notes - maybe someone will try to implement it.
* src/rtl/hbsocket.c
* removed not longer valid TODO note
* contrib/hbmisc/bbabble.c
! fixed buffer size calculation (it fixes buffer overflow for small
strings, i.e. 2 bytes and does not allocate more memory then necessary
for long ones)
* contrib/hbct/dattime2.c
! fixed CToMonth() and CToDoW() to respect case intensive search for
strings with national characters
* variable name synced with Viktor branch
* contrib/hbct/strswap.c
! fixed NULL reference when neither 1-st nor 2-nd parameter is passed
by reference
* contrib/hbct/fcopy.prg
! fixed source file positioning in case of partial write
! use hb_FGetDateTime() / hb_FSetDateTime() instead of
FileDate()+FileTime() / SetFDaTi()
It's faster and unlike FileDate() and FileTime() it does
not leave directory open.
! fixed typo (RTE)
% minor simplification
* src/rtl/disksphb.c
! use dynamic binding for GetDiskFreeSpaceEx() function
; modifications below comes from Viktor fork:
* contrib/hbct/ctwin.c
% removed unnecessary declaration
* contrib/hbct/envparam.c
! do not call FreeEnvironmentStrings() is it's not necessary
* contrib/hbodbc/odbc.c
! fixed potential buffer overflow in SQLERROR()/SQLGETDIAGREC()
* contrib/hbnetio/netiosrv.c
! fixed possible NULL reference
* contrib/hbct/ctnet.c
! added missing check for result of WinAPI function call
* contrib/hbct/cttime.prg
! SecToTime(): fixed regression from 2007-11-18 13:46 UTC+0100
* contrib/hbwin/hbolesrv.c
! fixed char -> TCHAR after recent unicodification
* include/hbapicdp.h
* include/hbapiitm.h
* src/rtl/itemseri.c
* changed 2-nd parameter in hb_itemSerialize() and hb_itemSerializeCP()
from HB_BOOL fNumSize parameter to int iFlags.
Previous fNumSize is replaced by HB_SERIALIZE_NUMSIZE flag.
Warning: declaration is not backward compatible though existing code
using these functions is binary compatible so it will work
without recompilation.
+ added support for optional compression of serialized values.
It can be enabled in C code by HB_SERIALIZE_COMPRESS flag.
+ added support for serialization flags passed in 2-nd parameter to
hb_Serialize() PRG function.
; Info: support for compression and decompression exists only in
programs which are linked with ZLIB library. Programmers
which want to use it and so far the haven't used ZLIB functions
should add to their code REQUEST HB_ZCOMPRESS
* include/Makefile
+ include/hbserial.ch
+ added header file with Harbour serialization flags.
Now the following flags are supported:
HB_SERIALIZE_NUMSIZE
HB_SERIALIZE_COMPRESS
I'll add support for HB_SERIALIZE_OBJECTSTRUCT soon.
* src/rtl/hbi18n1.c
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/netiosrv.c
* updated to use new Harbour serialization flags.
* .gitignore
! removed executable file permission
* package/mpkg_src.sh
! added executable file permission
* contrib/hbct/screen2.c
% use STR API for parameters instead of using local conversions
* contrib/hbct/token1.c
% small simplification
* contrib/hbnetio/netiosrv.c
+ respect timeout parameter also in send operation
* contrib/make.hb
! moved project name normalization and directory verification to
AddProject() function. It fixes HB_BUILD_ADDONS envvar functionality.
* doc/xhb-diff.txt
+ added new paragraph: DECLARATION AND INITIALIZATION OF VARIABLES
* src/rtl/hbcom.c
* added 3-rd parameter to TIOCEXCL and TIOCNXCL ioctl() codes
to pacify valgrind warnings
* include/hbexpra.c
! fixed compilation with HB_USE_ENUM_FUNCTIONS macro
* include/hbapicls.h
* include/hbcompdf.h
* include/hbexpra.c
* src/compiler/harbour.y
* src/vm/classes.c
+ added support for :__enumIsFirst() iterator message. It's opposite
to recently added :__enumIsLast()
+ added support for overloading :__enumIsFirst() and :__enumIsLast()
functionality in custom FOR EACH implementations
* include/hbcompdf.h
* include/hbexpra.c
* src/compiler/harbour.y
+ added support for reverting :__enumIsFirst() and :__enumIsLast()
messages in descendant FOR EACH loops. It's disabled now by 2 #if 0
but I think it should be discussed. Should we keep it enable it?
The answer is not trivial when FOR EACH is used to iterate some
objects. In general such names are confusing.
* src/compiler/harbour.yyc
* src/compiler/harbour.yyh
* regenerated using bison 2.5
* tests/foreach.prg
+ added :__enumIsFirst() to test code
* tests/foreach2.prg
! typo in comment
* bin/check.hb
! fixed --fixup-case when used with single file
+ deleted few more exceptions (contribs in particular)
* tests/clipper.ch
+ added few items
+ tests/bldtest/bldtext.hbp
+ added hbmk2 build file
* tests/hbpptest/compare.bat -> tests/hbpptest/compare.hb
* tests/hbpptest/pp_test.prg -> tests/hbpptest/_pp_test.prg
* converted batch file to Harbour script
* updated comments
- contrib/hbhpdf/tests/files/cp932.txt
- contrib/hbhpdf/tests/files/cp936.txt
- contrib/hbhpdf/tests/files/elic_jp.txt
- contrib/hbhpdf/tests/files/euc.txt
- contrib/hbhpdf/tests/files/sjis.txt
- turns out these were not used. deleted.
* contrib/hbnetio/tests/netiomt1.prg
* contrib/hbnetio/tests/netiot02.prg
* contrib/hbnetio/tests/netiot03.prg
* contrib/hbnetio/tests/netiotst.prg
* hbformat, fix case, manual corrections
(I like the former style better, because it's much
easier to type and looks much less antique than
std code format, but for now consistency won)
* contrib/xhb/thtm.prg
* code slightly altered to avoid embedded JS code to be
case fixed
* utils/hbmk2/hbmk2.es_PE.po
* utils/hbmk2/hbmk2.hu_HU.po
* utils/hbmk2/hbmk2.pt_BR.po
! added standard .po meta headers (manually for now)
* include/hbexpra.c
* src/compiler/harbour.y
* src/compiler/harbour.yyc
* src/vm/classes.c
* tests/foreach.prg
+ added :__enumIsLast() enum method. It returns .T. for
last relement, .F. else. It's useful to replace conditions
like: 'item:__enumIndex() < Len( item:__enumBase() )'
* tests/lang2po.hb
+ added standard .po meta header
; use __enumIsLast()
* contrib/hbnetio/utils/hbnetio/_console.prg
! fixed wrongly initialized management plugin
(missed to update it when adapted the plugin
for hbrun last year)
* contrib/hbnetio/utils/hbnetio/netiomgm.hb
! fixed to show proper error instead of RTE, if RPC calls
fail to return expect values
* contrib/hbnetio/utils/hbnetio/hbnetio.prg
* formatting
* (all files)
* stripped svn header
* minor cleanups
; use following command to find out the history of files:
git log
git log --follow
git blame
git annotate
