* harbour/contrib/gtwvg/gtwvg.c
* harbour/source/rtl/gtwvt/gtwvt.c
! fixed memory corruption caused by missing ASCII-0 terminator
when window title is retrieve
* harbour/contrib/hbct/screen2.c
! fixed possible vary bad bug (memory buffer overflow) in SCREENSTR()
* harbour/source/rtl/hbffind.c
! fixed possible GPF in some *nixes
* harbour/source/vm/classes.c
! do not execute the same destructor inherited from different parent
classes more then once
* harbour/source/rtl/transfrm.c
! fixed bug with '9' used as stop condition of function pattern
this character cannot be stripped, f.e.:
? transform( "abc", "@_99*" )
! fixed bug with '*' or '$' used with @), f.e.:
? transform( -12345, "@) $999999" )
! fixed replacing '.' with ',' when @E is used without picture part, f.e.:
? transform( 123.45, "@E" )
! fixed ',' conversions
? transform( 12.34,"@E ab,cd.ef9,9.99,.--" )
! fixed bug with picture starting with ".", f.e.:
? transform( 0.3456, ".999" )
! fixed "@(" and "@)" conversions, f.e.:
? transform( -12345, "@) 1999*999" )
! fixed late oveflow detection in "@(" and "@)", f.e.:
? transtest( -12345, "@( 6798^999" )
! fixed "@E" conversion for dates to keep user delimiters set in
_SET_DATEFORMAT, f.e.:
set( _SET_DATEFORMAT, "mm:dd:yyyy" ); ? transform( date(), "@E" )
set( _SET_DATEFORMAT, "yyyy<mm>dd" ); ? transform( date(), "@E" )
Please note that Harbour is not strictly Clipper compatible here
because it respects _SET_DATEFORMAT set by user.
! fixed 64bit integer conversion by eliminating conversion to
'double' f.e.:
? transform( 1234567890123456789, "99999999999999999999" )
? transform( -1234567890123456789, "99999999999999999999" )
! some other fixes, see regression test transtst.prg
% speed improvement in numeric conversions
+ harbour/tests/transtst.prg
+ added regression test for transform function
* harbour/utils/hbtest/rt_trans.prg
* disabled transform() tests for "@E" and result smaller then 5 bytes
CA-Cl*pper do not check result size and always exchanges
bytes 1-2 with bytes 4-5 for @E conversion. It's buffer overflow
bug and I do not want to replicate it inside our transform
implementation. It also causes that the results for for strings
smaller then 5 bytes behaves randomly.
In fact precise tests can show that it's not random behavior
but CA-Cl*pper uses static buffer for result and when current one
is smaller then 5 bytes then first two bytes are replaced with
4-5 bytes from previous result which was length enough, f.e.:
? transform( "0123456789", "" )
? transform( "AB", "@E" )
? transform( "ab", "@E" )
Replicating exact CA-Cl*pper behavior it's trivial (it will be enough
to use static buffer two and not check the size of current result) but
IMHO it's bug.
* harbour/source/rtl/round.c
* added strictly Clipper compatible code covered by HB_C52_STRICT
and comment about possible difference in Harbour.
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtxwc/gtxwc.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gttrm/gttrm.c
* harbour/source/rtl/gtwvt/gtwvt.c
+ added HB_GTI_ISUNICODE - it returns logical value with information
about Unicode mode in active GT driver - it's necessary for proper
CP initialization in some GTDs which can work in both mode depending
on client side settings
* harbour/source/rtl/gttrm/gttrm.c
* improved UTF-8 detection
* added automatic PuTTY detection
* improved PuTTY and some xterm key handling
* added some missing RXVT keys
* harbour/bin/pack_src.sh
* try to detect GNU tar
* harbour/make_xmingw.sh
* added new default location for MinGW cross-compiler in Gentoo
distribution
* added auto detection of MinGW cross-compiler installation which
should work in most cases when default location test fails
* harbour/make_tgz.sh
* try to detect GNU make and GNU tar
* harbour/source/rtl/gtwvt/gtwvt.c
* call hb_gt_wvt_InitWindow explicitly to eliminate problems
with ignored WM_CREATE message when new window handler is not
yet registered
* harbour/source/rtl/hbgtcore.c
* formatting
* harbour/source/vm/hvm.c
! fixed typo in HB_TRACE message
* harbour/source/rtl/gtwvt/gtwvt.h
* harbour/source/rtl/gtwvt/gtwvt.c
* updated for multi window usage
* harbour/source/vm/maindllp.c
* use MessageBox() instead of hb_errInternal() - thanks to Jon Jagger
for information about the problem
* harbour/source/rtl/gtwvt/gtwvt.h
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/contrib/hbgtwvg/gtwvt.h
* harbour/contrib/hbgtwvg/gtwvt.c
* moved RGB definition of used colors to terminal window structure,
now each window can use different palette
* harbour/include/hbgtcore.h
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtapi.c
* harbour/source/rtl/inkeyapi.c
* harbour/source/rtl/mouseapi.c
- removed hb_gt_*(), hb_inkey_*(), hb_mouse_*() functions
+ implemented HB_GTSELF_*() functions and changed HB_GTSUPER_*()
ones to operate on GT context passed ad 1-st parameter.
Now GT API allows to create many GTs working simultaneously
+ added hb_gt_Base() core function which returns GT context
it will be extended soon to allow using many GT contexts,
setting thread default one or switch between them using some
.prg function.
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtcgi/gtcgi.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gttrm/gttrm.c
* harbour/source/rtl/gtxwc/gtxwc.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtcrs/gtcrs.h
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtsln/gtsln.h
* harbour/source/rtl/gtsln/kbsln.c
* harbour/source/rtl/gtsln/mousesln.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/rtl/gtgui/gtgui.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.h
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/contrib/hbct/ctwin.c
* harbour/contrib/hbct/ctwin.h
* harbour/contrib/hbct/ctwfunc.c
* harbour/contrib/hbgtwvg/gtwvt.h
* harbour/contrib/hbgtwvg/gtwvt.c
* updated GT code for new GT API. I still haven't added GT cloning
to them and only GTTRM is ready to use in multi window MT programs
but now they can be systematically modified and it can be done
locally without core code modifications.
* harbour/contrib/hbgtwvg/wvtutils.c
! fixed some memory leaks in Unicode conversions
* harbour/include/hbgtcore.h
+ added some missing HB_GTSUPER_* functions
* harbour/contrib/hbgtwvg/wvtcore.c
* use hb_gt*() functions instead of hb_gt_*() ones
* harbour/contrib/hbgtwvg/wvtutils.c
* harbour/contrib/hbgtwvg/gtwvt.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtgui/gtgui.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gttone.c
* harbour/source/rtl/gtclip.c
* minor cleanup in hb_gt_w32_*() function names
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtclip.c
* use common for all GT internal Clipboard buffer - thanks to Pritpal
for a note
* harbour/include/hbwmain.c
* harbour/source/vm/mainwin.c
! fixed unnecessary conversion of WinMain() parameters on W32/W64
when UNICODE macro is set - thanks to Chen
* harbour/source/rdd/sdf1.c
* harbour/source/rdd/delim1.c
! fixed code wrongly synced with xHarbour - in Harbour HB_SET_EOL
is char* not PHB_ITEM - thanks to Andi
* harbour/source/compiler/genc.c
! fixed file name in generated for C inline code by escaping
special characters - thanks to Andi
* harbour/source/rtl/gtwvt/gtwvt.c
* minor code cleanup
* harbour/contrib/gtwvg/wvtcore.c
! fixed setting default foreground and background color when user
does not pass it's own one. Previous versions was using _s->background
and _s->foreground - it was wrong because this variables in all
GTWVT base GTs (also in xHarbour) contains not default color but
the color recently used to redraw some part of screen - f.e. after
exposing some region - it means that they can have any value.
Such bugs are hard to locate because the same program can be executed
many times without any problem and suddenly he will use wrong colors
drawing sth - if you observed such effect then it can be the results
of the above problem. Now default color is taken from core GT code.
Two functions make it: hb_wvt_FgColorParam() and hb_wvt_BgColorParam()
Both accept also colors passed as standard Clipper strings.
The same should be also fixed in xHarbour just like the problem with
executing registered user functions when HVM is closing fixed in
previous commit - even if now it does not cause GPF (due to race
condition it may be exploited only sometimes) then it does not mean
it works correctly.
* harbour/source/rtl/gtwvt/gtwvt.h
* harbour/source/rtl/gtwvt/gtwvt.c
* removed unused global hdc
* formatting and minor code cleanup
* harbour/source/vm/hvm.c
+ added to hb_vmRequestReenter() support for checking if HVM is
properly initialized and working for code which may want to execute
PCODE before HVM initialization or after HVM close - in such case
hb_vmRequestReenter() will return FALSE.
Please also remember that in the future hb_vmRequestReenter()
may return FALSE also in some other cases.
* harbour/source/vm/eval.c
* use hb_vmRequestReenter()/hb_vmRequestRestore() in hb_itemDo[C]()
instead of hb_vmPushState()/hb_vmPopState()
* harbour/contrib/gtwvg/gtwvt.c
! always use hb_vmRequestReenter()/hb_vmRequestRestore() before
executing .prg functions/codeblocks. It will resolve the problem
with executing .prg functions during HVM closing. Anyhow I suggest
to register C cleanup functions using hb_vmAtExit() for code which
needs some additional destructor/closing procedure.
* code formatting and indenting
* source/rtl/gtwin/gtwin.c
* source/rtl/gtcrs/gtcrs.h
* source/rtl/gtsln/gtsln.h
* source/rtl/gttrm/gttrm.c
* source/rtl/gtwvt/gtwvt.h
+ #defining xhb compatible K_SH_* keyboard codes only if
they were not already defined.
* utils/hbdoc/genasc.prg
! Fixed problem generating filenames for .txt output.
Also added LFN branch to get rid of the 8.3 limitation.
* harbour/source/rtl/gtwvt/gtwvt.h
* harbour/source/rtl/gtwvt/gtwvt.c
* removed foreground and background from GLOBAL_DATA
- they are not necessary
+ added support for gfxPrimitive() - fixed xHarbour code
* harbour/contrib/gtwvg/gtwvt.c
+ added support for gfxPrimitive() - fixed xHarbour code
* removed some methods which can be safely replaced by
default ones
* harbour/tests/gfx.prg
* harbour/tests/wcecon.prg
* harbour/tests/gtchars.prg
* updated the order of changed font parameters
* harbour/contrib/xhb/hbcompat.ch
! added missing closing square bracket
* harbour/source/rtl/gtwvt/gtwvt.c
* declared two functions
hb_gt_wvt_AddCharToInputQueue() and
hb_gt_wvt_AddCharToInputQueue()
as static - they were public by mistake
* harbour/contrib/gtwvg/wvtcore.c
* harbour/contrib/gtwvg/gtwvt.c
* moved hb_wvt_gtDlgProcMLess() and hb_wvt_gtDlgProcModal()
from gtwvt.c to wvtcore.c
These both functions are wrong and have to be fixed.
* farther cleanup:
- declared some internal functions as static
- synced some other with GTWVT
- removed some repeated declarations
* harbour/source/rtl/gtwvt/gtwvt.c
* formatting
* harbour/contrib/gtwvg/gtwvt.h
* harbour/contrib/gtwvg/gtwvt.c
* removed some unused code and redirect some methods to common
for all MS-Win GTs functions.
Pritpal this code needs cleanup. Now it's xHarbour GT hacked
to compile and link with Harbour API. It means that this code
also inherited some small incompatibilities to Clipper which
exists in xHarbour GTs. If you agree I'll try to systematically
clean it and as I can see IMO the final version will look like
GTWVT in core code plus some additional code so it can be quite
easy separated. Probably with some small modifications in GTWVT it
will be possible to remove these two files from GTWVG at all
changing GTWVG to inherit from core GTWVT. Such separation will
also show what is core GT code and what is GUI Windows extension
what should help in defining common multi platform API.
+ harbour/include/hbassert.h
* harbour/include/hb_io.h
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/fssize.c
* harbour/source/rtl/hbinet.c
* harbour/source/rtl/filesys.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbstripl.c
* harbour/utils/hbver/hbverfix.c
* harbour/utils/hbpp/hbppcore.c
* removed dependences to unsupported by new MSVC header files
most of this modifications can be enabled also for standard Win32
builds
* harbour/source/common/hbwince.c
* do not create dummy LocalLock() and LocalUnlock() function in MSVC
WinCE builds
* harbour/source/rtl/gtwin/gtwin.c
+ added HB_WINCE_USE_POCKET_CONSOLE macro which enable
console support in WINCE builds (macro suggested by Marek Paliwoda)
* harbour/source/rtl/gtwvt/gtwvt.h
* harbour/source/rtl/gtwvt/gtwvt.c
* changed default window and font size on WinCE to values suggested
by Marek Paliwoda
Marek if you have a while please make test with MSVC WinCE/PocketPC
builds and current SVN code.
* harbour/include/hbcomp.h
* harbour/include/hbmacro.h
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/harbour.y
* harbour/source/vm/macro.c
* harbour/source/vm/garbage.c
* harbour/source/vm/hvm.c
* harbour/source/vm/classes.c
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* harbour/source/rtl/binnum.c
* harbour/source/rtl/gtwvt/gtwvt.c
* added explicit casting or changed some declarations to avoid
warning about possible data lost in conversions
* harbour/source/rtl/direct.c
% optimized directory array creation and fixed one TOFIX note
I left few warnings intentionally to mark places which should be
updated in the future (f.e. HB_SYMBOLSCOPE translations).
Victor, if you can please make build test with MSVC builds and
send the list of warnings which still exist to harbour-devel.
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added hb_cdpGetChar()
+ harbour/tests/wcecon.prg
+ added demonstration console program for WinCE,
compile it using:
hbmk -n -w -es2 -gtwvt wcecon
* harbour/include/hbwince.h
* harbour/source/common/hbwince.c
* harbour/contrib/win32/w32_ole.c
* harbour/contrib/odbc/odbc.c
* use UNICODE macro instead of HB_WINCE to allow using Unicode
WINAPI also in other MS-Windows versions
* harbour/source/rtl/gtwvt/gtwvt.h
* harbour/source/rtl/gtwvt/gtwvt.c
+ added support for Unicode IO
* harbour/source/rtl/diskspac.c
* harbour/source/rtl/disksphb.c
! fixed wrongly set error code
! fixed possible access to uninitialized memory
* use GetDiskFreeSpaceEx() on WinCE instead of GetDiskFreeSpace()
for disk larger then 4GB - I do not know if PocketPC have such
large devices now or if WinCE can support it but for sure it will
somewhere in the future
* harbour/bin/hb-mkslib.sh
* harbour/bin/pack_src.sh
* updated for recent Viktor's modifications
* harbour/source/rtl/oemansix.c
! added missing #include "hbpai.h"
* harbour/include/Makefile
+ harbour/include/hbwince.h
* harbour/include/hbrdddbf.h
* harbour/include/hbrdddbt.h
* harbour/include/hbdefs.h
* harbour/include/hbsetup.h
* harbour/include/hbrddcdx.h
* harbour/include/hbrddfpt.h
* harbour/contrib/xhb/hboutdbg.c
* harbour/contrib/xhb/hbsyslog.c
* harbour/contrib/xhb/xhbfunc.c
* harbour/contrib/libct/ctnet.c
* harbour/contrib/libct/files.c
* harbour/contrib/libct/disk.c
* harbour/contrib/libnf/getenvrn.c
* harbour/contrib/win32/tprinter.c
* harbour/contrib/win32/w32_ole.c
* harbour/contrib/win32/w32_prn.c
* harbour/contrib/odbc/odbc.c
* harbour/source/pp/ppgen.c
* harbour/source/rtl/diskspac.c
* harbour/source/rtl/gtclip.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/gtchrmap.c
* harbour/source/rtl/oemansi.c
* harbour/source/rtl/disksphb.c
* harbour/source/rtl/fssize.c
* harbour/source/rtl/hbffind.c
* harbour/source/rtl/filesys.c
* harbour/source/rtl/net.c
* harbour/source/rtl/gtgui/gtdef.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/vm/Makefile
* harbour/source/vm/mainwin.c
* harbour/source/vm/dynlibhb.c
+ harbour/source/vm/mainwin/Makefile
* harbour/source/common/Makefile
* harbour/source/common/hbgete.c
* harbour/source/common/hbver.c
+ harbour/source/common/hbwince.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbdot/hbdot.prg
* harbour/utils/hbver/hbverfix.c
+ added support for WinCE and PocketPC
+ harbour/make_xcemgw.sh
+ harbour/config/w32/cemgw.cf
* harbour/bin/hb-mkslib.sh
* harbour/bin/hb-func.sh
* harbour/bin/postinst.sh
+ added support for CeGCC-MinGW32 port - those of you who want to
create applications for WinCE on PockePC with ARM processors on
Linux or MS-Windows can download from SF cegcc-mingw32ce port.
User using RPM based Linux distribution for x86 CPUs can simply
download cegcc-mingw32ce-0.50-1.i586.rpm and install it.
The hb* scripts created by ./make_xcemgw.sh [tgz|gnu] are
automatically updated to work with CeGCC-MinGW32 so later you
can simply crate WinCE-ARM binaries using them as for native port.
I'm waiting for users feedback. Please remember that I'm not Windows
user and even this port was created without any Pocket machine.
With Marek Paliwoda help I only tested that final applications are
working using PocketPC emulator.
* harbour/include/hbgtinfo.ch
* harbour/contrib/libct/ctwin.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
+ added support for GTI_FULLSCREEN, GTI_KBDSUPPORT, GTI_ISCTWIN
* harbour/source/rtl/hbgtcore.c
! fixed line and box drawing when the coordinates are out of screen size
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbpcode.h
* harbour/include/hbstack.h
* harbour/include/hbvm.h
* harbour/include/hbxvm.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/classes.c
* harbour/source/vm/estack.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
! added protection against cyclic references in arrays
* eliminated action parameter from hb_vmRequestReenter() /
hb_vmRequestRestore()
* moved s_lRecoverBase and s_uiActionRequest to HB_STACK structure
for future MT HVM version
+ added internal item structure hb_struRecover - it's not real item
but this structure is used to keep information about BEGIN SEQUENCE
data - it reduce HB_STACK usage
+ added support for ALWAYS clause in BEGIN SEQUENCE
The syntax is:
BEGIN SEQUENCE
<code>
[ RECOVER [ USING oErr ] ]
<recoverCode>
[ ALWAYS ]
<alwaysCode>
END [ SEQUENCE ]
It's guaranteed that <alwaysCode> is _ALWAYS_ executed even if
inside <code> or <recoverCode> some new exceptions like RETURN,
BREAK or QUIT will appear.
Please note that when the following code is executed:
BEGIN SEQUENCE
<code>
ALWAYS
<alwaysCode>
END
(without RECOVER clause) then BREAK exception inside <code> is not
recovered, <alwaysCode> is executed and then BREAK exception is
passed to outer BEGIN SEQUENCE. This is the same semantic as
used in TRY / [ CATCH ] / FINALLY / END
Those of you who prefer to use TRY / CATCH / FINALLY / END instead
of BEGIN SEQUENCE / RECOVER / ALWAYS / END can simply add to your
source code:
#command TRY => BEGIN SEQUENCE
#command CATCH [ oErr ] => RECOVER [ USING <oErr> ]
and:
errorBlock( {|oErr| break( oErr ) } )
Though instead of 'break( oErr )' I suggest to use some small function
which will support some basic recovery/substitute operations like in
default errorsys() and LockErrHandler() to not break existing code
which may depends on the default behavior.
If you want I can add direct support for TRY / CATCH / FINALLY / END
but I'm not sure it's really necessary.
Please note also that in Harbour ALWAYS code is execute even for QUIT
excpetion.
When <alwaysCode> is executed current exception is stored and restored
when is finished. If new exception appears inside <alwaysCode> then
restored exception depends on the priority in the following order:
QUIT // highest priority
BREAK
RETURN
If both exceptions have the same priority and contain additional value
(error object in BREAK or return value in RETURN) then the recently set
one is restored. It's similar behavior to destructor code.
* harbour/source/common/hbstr.c
* moved one character length string table (hb_szAscii) from hvm.c
to use it also in compiler and preprocessor
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/pplib.c
* tuned error messages to be more Clipper compatible
% use static strings from hb_szAscii
* harbour/source/rtl/alert.prg
* use hb_gtInfo( GTI_FULLSCREEN ) to detect type of GT driver
! some minor fixes
TOFIX: we have to also use GTI_ISCTWIN or add window allocation
to standard GT drivers to be Clipper compatible when CTWIN
is used - In Clipper Tools ALERT() works in differ way then
the standard one. It creates separate window box to display
data, supports SETKEY(), etc. I'll think about adding some
extended support for ALERT() and similar operations (f.e.
separate debugger windows) to GT API so it will be also
possible to overload standard alert() command by GUI message
box in GTGUI and similar GT drivers.
* harbour/source/rtl/binnumx.c
! fixed U2BIN() - wrong casting
* harbour/bin/hb-func.sh
* harbour/bin/hb-mkslib.sh
* harbour/bin/postinst.sh
* harbour/config/bsd/gcc.cf
* harbour/config/darwin/gcc.cf
* harbour/config/dos/owatcom.cf
* harbour/config/hpux/gcc.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/owatcom.cf
* harbour/config/os2/gcc.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/watcom.cf
* harbour/contrib/rdd_ads/ads1.c
* harbour/contrib/rdd_ads/adsfunc.c
* harbour/include/hbapifs.h
* harbour/include/hbexprc.c
* harbour/include/hbsetup.h
* harbour/source/common/expropt2.c
* harbour/source/common/hbdate.c
* harbour/source/common/hbgete.c
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
* harbour/source/common/hbverdsp.c
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/fixflex.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbfunchk.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/ppgen.c
* harbour/source/pp/pplib.c
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/workarea.c
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* harbour/source/rdd/hsx/hsx.c
* harbour/source/rtl/accept.c
* harbour/source/rtl/ampm.c
* harbour/source/rtl/console.c
* harbour/source/rtl/defpath.c
* harbour/source/rtl/errorint.c
* harbour/source/rtl/filesys.c
* harbour/source/rtl/fkmax.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/hbffind.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/langapi.c
* harbour/source/rtl/seconds.c
* harbour/source/rtl/set.c
* harbour/source/rtl/tobject.prg
* harbour/source/rtl/transfrm.c
* harbour/source/rtl/gtcrs/chrmap.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtcrs/gtcrs.h
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
* harbour/source/vm/classes.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/debug.c
* harbour/source/vm/estack.c
* harbour/source/vm/fm.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* harbour/source/vm/proc.c
* harbour/source/vm/runner.c
* harbour/utils/hbmake/hbmlang.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/pragma.c
* harbour/utils/hbver/hbverfix.c
* general code cleanup: all strcpy() and strcat() replaced hb strn*()
and hb_strn*(), sprintf() by snprintf(), etc.
It fixed some possible buffer overflow but it's also possible that
it will exploit some some hidden so far problems but I strongly
prefer to know about them ASAP to fix them before final 1.0 release.
! fixed bug I introduce in codeblock falgs which disabled early macro
evaluation in codeblocks.
! added missing protection against execution by bison destructor for
used CBSTART token on syntax error.
% use PP stringify logik added for FLEX support to remove all redundant
spaces in stringified for early macro evaluation codeblocks and add
spaces between operators if after preprocessing they were removed.
Now we are supporting also some code which cannot be compiled by
Clipper.
% cleaned and improved the speed of printer redirecting in console code.
Chen please check if CG still reports problems and if not ubdate
TODO/TOFIX or inform me about them.
* some cleanups in building process for different *nixes: MacOSX, SunOS,
*BSD, etc.
* removed not longer necessary (I hope) compiler flag to force default
'char' type as signed. Now Harbour should work with signed and unsigned
char without any problems. To other developers: please remember that
when you are using 'char' as 8 bytes signed integer then it's a bug.
Always explicitly use: 'signed char' in such case. On some platforms
it's not possible to set default type for 'char' so if you hardcode
that 'char' is signed or unsigned somewhere then code will not be
portable. Chen if you will find a while to also rebuild Harbour with
BCC and -K switch to make some tests with CG then I'll be thankful.
* harbour/source/rtl/Makefile
+ harbour/source/rtl/gtclip.c
+ harbour/source/rtl/gttone.c
* harbour/include/hbgtcore.h
* separated low level TONE and ClipBoard code for W32
new functions:
hb_gt_w32_Tone()
hb_gt_w32_SetClipboard()
hb_gt_w32_GetClipboard()
Please update non GNU make files
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.c
* use hb_gt_w32_*() for common GT code
* harbour/config/w32/global.cf
+ harbour/source/rtl/gtgui/Makefile
+ harbour/source/rtl/gtgui/gtgui.c
+ added GTGUI GT driver - it inherits from GTNUL and add support
for TONE and CLIPBOARD
* harbour/config/w32/dir.cf
+ added EOL at EOF
* harbour/config/w32/global.cf
* changed clean and dirbase commands to work cleanly with CMD.EXE
* harbour/source/rtl/gtwin/gtwin.c
* always try to allocate console
+ added workaround for MSYS console which does not support
WriteConsoleOutput()/ReadConsoleInput()
* harbour/source/rtl/gtwvt/gtwvt.c
* changed default codepage to OEM
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwxt/gtwxt.c
! Possible (double) fix to properly handle embedded zero bytes
when getting clipboard content.
* harbour/config/linux/dir.cf
* harbour/config/linux/gcc.cf
* formatting
* harbour/config/linux/global.cf
* harbour/config/linux/install.cf
* added -ldl to linked library list and RANLIB executing after library
creation
* harbour/contrib/ole/ole2.c
* added #include "hbapicls.h"
+ harbour/include/hbapicls.h
* harbour/include/hbapi.h
+ added HB_IT_ENUM item
+ added collect member to HB_IT_POINTER structure for POINTER items
inspected by GC
* changed the order of HB_CODEBLOCK members to safe few bytes on
alignment
* removed counters from HB_CODEBLOCK and HB_BASEARRAY structure
+ added hb_xRefInc(), hb_xRefDec(), hb_xRefFree(), hb_xRefCount(),
hb_xRefResize() functions. They are internal Harbour VM functions
and covered by internal API macro. Should not be used by 3-rd
party code because we may change them in the future or even remove.
+ added hb_gcRefInc(), hb_gcRefDec(), hb_gcRefFree(), hb_gcRefCount()
functions. These are also internal function which corresponds to the
above hb_x*() ones.
- removed hb_arrayRelease() function. This function is not longer
necessary and it should never be public function - it was implemented
in very dangerous way.
- removed hb_codeblockDelete() function.
- removed hb_memvarValueDecGarbageRef()
+ added USHORT usLen parameter to hb_codeblockMacroNew() - when sets
to non 0 value it informs that PCODE should be copied to dynamically
allocated buffer.
* moved all classes/object functions to separate file: hbapicls.h
+ added hb_retptrGC()
+ added internal function hb_memvarGetItem()
* harbour/include/hbapiitm.h
- removed hb_itemForwardValue() and added macro which translates
hb_itemForwardValue() to hb_itemMove()
+ added hb_itemUnShareString() and hb_itemReSizeString() functions
+ added hb_itemSetNil() macro
* harbour/include/hbdefs.h
* some cleanups in macro definitions
* harbour/include/hbexprb.c
* indenting
* harbour/include/hbvm.h
* harbour/include/hbinit.h
+ added hb_vmProcessSymbolsExt(), hb_vmRegisterSymbols(),
hb_vmFreeSymbols(), hb_vmBeginSymbolGroup(),
hb_vmInitSymbolGroup(), hb_vmExitSymbolGroup()
* changed hb_vmProcessSymbols() to return address of register symbol
table. For normal code it's the same address as given in parameter
so it does not break backward binary compatibility.
* changed symbol init macros to work correctly with modified address
of symbol table
* harbour/include/hbsetup.h
* added support for HB_USE_PROFILER macro. Now profiler code is
is disable in HVM by default
* commented out HB_ASORT_OPT_ITEMCOPY - it's not longer used - see note.
* harbour/include/hbstack.h
* added missing parenthesis in hb_stackItem() macro
* harbour/include/hbtypes.h
* updated VM_PROCESS_DLL_SYMBOLS definition
+ added VM_PROCESS_SYMBOLS_EXT
- removed HB_ARRAYRELEASE
* harbour/include/hbver.h
* changed revision number to 2
* harbour/include/hbvmpub.h
- remove pFunPtr from HB_DYNS and cover profiler member by
#ifndef HB_NO_PROFILER
+ added HB_PCODEFUNC structure
+ added HB_FS_PCODEFUNC, HB_FS_DYNCODE and HB_FS_LOCAL - the last one
is not used yet.
* harbour/include/hbxvm.h
* added some multipcode functions for some speed optimization in -gc3
output
* harbour/include/hbapicdp.h
* harbour/source/codepage/cpbg866.c
* harbour/source/codepage/cpbgiso.c
* harbour/source/codepage/cpbgwin.c
* harbour/source/codepage/cpeldos.c
* harbour/source/codepage/cpelwin.c
* harbour/source/codepage/cpesdos.c
* harbour/source/codepage/cpesmwi.c
* harbour/source/codepage/cpeswin.c
* harbour/source/codepage/cpgedos.c
* harbour/source/codepage/cpgewin.c
* harbour/source/codepage/cphu852.c
* harbour/source/codepage/cphuiso.c
* harbour/source/codepage/cphuwin.c
* harbour/source/codepage/cppl852.c
* harbour/source/codepage/cppliso.c
* harbour/source/codepage/cpplmaz.c
* harbour/source/codepage/cpplwin.c
* harbour/source/codepage/cppt850.c
* harbour/source/codepage/cpptiso.c
* harbour/source/codepage/cpru866.c
* harbour/source/codepage/cprukoi.c
* harbour/source/codepage/cpruwin.c
* harbour/source/codepage/cpsl437.c
* harbour/source/codepage/cpsl852.c
* harbour/source/codepage/cpsliso.c
* harbour/source/codepage/cpslwin.c
* harbour/source/codepage/cpsrwin.c
* harbour/source/common/hbfhnd.c
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
* harbour/source/compiler/gencli.c
* harbour/source/rtl/fstemp.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/langapi.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/rtl/gtalleg/ssf.h
* harbour/source/rtl/gtcgi/gtcgi.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
* cleaned the code to avoid warnings for some non ANSI C constructions
* harbour/source/compiler/cmdcheck.c
* formatting
* harbour/source/compiler/gencc.c
* added some multipcode optimizations
* harbour/source/compiler/genc.c
* keep function name set by compiler for static initstatics
* harbour/source/compiler/harbour.c
* extend init statics name with the number of used static variables
* formatting
* harbour/source/compiler/hbusage.c
+ added my name to developers list - I hope that there is enough
of my code in Harbour (BTW for quite long time) ;-)
* harbour/source/rdd/dbcmd.c
- removed DBF2TEXT() function
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* generate RT error when someone tries to create DBF with memo fields
without MEMO RDD linked.
* harbour/source/rtl/errorapi.c
* replace all hb_vmDo() with hb_vmSend()
* harbour/source/rtl/math.c
* use hb_errPutArgs() to pass parameters to error object
* harbour/source/rtl/philes.c
* harbour/source/rtl/space.c
* harbour/source/rtl/strpeek.c
* some minor optimizations
* harbour/source/vm/arrays.c
- removed hb_arrayRelease() function.
* changed hb_arrayReleaseGarbage() to be safe for recursive call
* updated to use GC counters
* harbour/source/vm/arrayshb.c
* use stack function/macros instead of direct accessing HB_STACK members
* harbour/source/vm/asort.c
* removed unused HB_ASORT_OPT_ITEMCOPY
* harbour/source/vm/classes.c
* added class code from HVM
% added fast overloaded operator detection and execution
+ added hb_objHasOperator(), hb_objOperatorCall()
+ added separated overloading of "=" and "==" operators
* operate on PHB_SYMB not PHB_FUNC - support for pure PCODE function
without any machine code
* use stack function/macros instead of direct accessing HB_STACK members
* separated profiler code
* some code cleaning
* harbour/source/vm/codebloc.c
+ added USHORT usLen parameter to hb_codeblockMacroNew() - when sets
to non 0 value it informs that PCODE should be copied to dynamically
allocated buffer.
* updated to use GC counters
- removed hb_codeblockDelete() function.
* changed hb_codeblockDeleteGarbage() to be safe for recursive call
- removed restoring statics base in hb_codeblockEvaluate()
* harbour/source/vm/debug.c
* cleaned and optimized some code
* harbour/source/vm/dynlibhb.c
+ added support for loading and unloading dynamic libraries with PCODE
+ added support for dynamic libraries in Linux (.so)
+ added HB_LIBERROR() - returns error string with last error in
HB_LIBLOAD() - now works only in Linux
* harbour/source/vm/dynsym.c
* separated profiler code
+ use pDynSym->pSymbol->value.pFunPtr instead of pDynSym->pFunPtr
* harbour/source/vm/estack.c
+ added #include "hbapicls.h"
+ added hb_stackPushReturn(), hb_stackPopReturn()
* harbour/source/vm/eval.c
* harbour/source/vm/extend.c
* use stack function/macros instead of direct accessing HB_STACK members
+ added hb_retptrGC()
* harbour/source/vm/fm.c
+ added hb_xRefInc(), hb_xRefDec(), hb_xRefFree(), hb_xRefCount(),
hb_xRefResize() functions. They are internal Harbour VM functions
and covered by internal API macro. Should not be used by 3-rd
party code because we may change them in the future or even remove.
* harbour/source/vm/garbage.c
+ added hb_gcRefInc(), hb_gcRefDec(), hb_gcRefFree(), hb_gcRefCount()
functions. These are also internal function which corresponds to the
above hb_x*() ones.
* changed Step 3 of GC pass and execution of clean-up function to be
safe for recursive calls and additional activity.
Ryszard see my note and s_pDeletedBlock
+ added GC inspected HB_IT_POINTER items.
* harbour/source/vm/hvm.c
* separated profiler code
* separated class code from HVM
+ added support for loading and unloading libraries with PCODE modules
+ added support for pure PCODE functions
+ added support for string item resizing and preallocating string buffer
+ added some new multipcode functions for -gc3 optimization
+ added hb_vmProcessSymbolsExt(), hb_vmRegisterSymbols(),
hb_vmFreeSymbols(), hb_vmBeginSymbolGroup(),
hb_vmInitSymbolGroup(), hb_vmExitSymbolGroup()
* changed hb_vmProcessSymbols() to return address of register symbol
table. For normal code it's the same address as given in parameter
so it does not break backward binary compatibility.
+ use new code for operator overloading
* changed FOR EACH to dynamically check iteration scope in
hb_vmEnumNext()/hb_vmEnumPrev() and remove max number of iteration
stored on HVM stack
* temporary use hb_itemUnRefOnce() instead of hb_itemUnRefRefer() as
workaround for possible GPF. I'd like Ryszard will chose the final
version
* harbour/source/vm/itemapi.c
+ added support for preallocating string buffer size
+ added hb_itemUnShareString() and hb_itemReSizeString()
* updated string items to use counters allocated with each
memory block by xh_xgrab()/hb_xalloc()
* updated codeblock and array items to use GC reference counters
+ added GC inspected HB_IT_POINTER items.
* generate RT error in hb_itemUnreOnce() for enumerator items
out of scope
+ added hb_itemPutPtrGC()
* harbour/source/vm/macro.c
* use pDynSym->pSymbol->value.pFunPtr instead of pDynSym->pFunPtr
* harbour/source/vm/maindllp.c
* updated usage of hb_vmProcessSymbols()
* added hb_vmProcessSymbolsExt()
* harbour/source/vm/memvars.c
+ added hb_memvarGetItem()
- removed hb_memvarValueDecGarbageRef()
* harbour/source/vm/proc.c
+ added #include "hbapicls.h"
* harbour/source/vm/pvalue.c
* do not access stack structure directly but use hb_stack*()
functions (macros)
* harbour/source/vm/runner.c
* synced with xHarbour
* harbour/utils/hbtest/rt_misc.prg
* added overloading "=" operator. Now "==" and "=" can be overloaded
with different methods
All names I used for new functions/macros can be changed. Please look at
it and if you will some better propositions then we can use it.
hb_vmProcessSymbolsExt() is added but not used yet.
* harbour/make_gnu.bat
* harbour/make_gnu.cmd
* harbour/make_gnu.sh
* added information about GTWVT to GT description for Windows
* harbour/contrib/rdd_ads/ads1.c
* harbour/contrib/rdd_ads/adsfunc.c
* harbour/source/rdd/dbf1.c
* synced with xHarbour
* harbour/source/rtl/console.c
! fixed PROW() updating to be Clipper compatible when row number
exceed 16bit integer value
* harbour/source/rtl/filesys.c
! fixed possible GPF when hb_fsCurDirBuff()
* harbour/source/rtl/str.c
* harbour/source/rtl/strzero.c
* minor optimizations
* harbour/source/rtl/strpeek.c
! fixed accessing the last character in STRPEEK() and STRPOKE()
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/gtwin/gtwin.c
+ synced with recent xHarbour modifications
* harbour/source/rtl/gtwvt/gtwvt.c
* cleaned BCC warning
* harbour/include/hbapi.h
* harbour/source/vm/codebloc.c
* declare BYTE * passed to hb_codeblockNew() as const
* harbour/include/hbpcode.h
! fixed the PCODE numbers in PCODE description, 122 was repeated for
two different PCODEs: HB_P_ONE and HB_P_MACROLIST
* harbour/source/compiler/genc.c
! fixed hb_p_functionshort pcode size returned by genc function
! fixed double value presented in verbose genc mode for HB_P_PUSHDOUBLE
! fixed number of cases presented in verbose genc mode for HB_P_SWITCH
* harbour/source/compiler/hbdead.c
+ added support for dead code elimination in functions which uses
SWITCH ...; CASE ...; ...; END syntax
* harbour/source/compiler/harbour.c
* harbour/source/compiler/hbfix.c
! fixed optimization for HB_P_PUSHLOCALNEAR and HB_P_POPLOCALNEAR.
It was a long existing bug not reported so far because 0, 1 and 2
PCODEs uses only one BYTE and bad PCODE tracing in hbfix.c didn't
caused bad side effects as long as number of locals in function
was smaller then 768. Now for functions HB_P_PUSHLOCAL and
HB_P_POPLOCAL is used and later changed to NEAR version in hbfix.c
if possible.
* harbour/source/compiler/hbfix.c
* join sequential jumps to optimize constructions like:
while ...
...
if ...
exit
endif
enddo
* harbour/source/compiler/hbdead.c
* remove HB_P_END PCODE also at the and of function if is repeated
just before, f.e. in code like (source/rtl/color53.prg):
Function RADGRDEFCO( cColor )
if isdefcolor()
Return applydefau( cColor, "W/N", "W/N", "W+/N")
Else
Return applydefau( cColor, 3, 1, 4)
endif
Return nil
Now such redundant constructions like above are fully stripped by
compiler anyhow if someone has time and think is important then can
clean also this .prg code.
* harbour/include/Makefile
* harbour/include/hbcomp.h
+ harbour/include/hbxvm.h
* harbour/source/compiler/Makefile
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/genc.c
+ harbour/source/compiler/gencc.c
+ harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/vm/hvm.c
+ added support for generating real C code not PCODE in .c files.
Now with -gc3 Harbour will generate .c files with real .c code
which is later compiled to real machine code.
I left PCODE only for code block definitions though it's also
possible to have even code block compiled to machine code but
we will have to add a flag to codeblock structure which will
be checked at runtime and proper method of execution in EVAL
will be chosen. If you think it's worth of afford then I can
add it too in some spare time.
The final binaries are noticable longer then the one which has
only PCODE but they are faster. The speed improvement depends
on type of operations. The pure Clipper code which does not
execute any external time consuming C functions compiled with
-gc3 is from 10% to 50% faster.
The side effect of generating pure machine code is also harder
recompilation but it does not mean that is impossible. If sth
can be executed by some machines (virtual or hardware) then it
can always be decompiled by definition.
This modification opens door for farther optimization, f.e. when
we will have fully working strong type support then we can add
using native .c types.
In fact this module is PCODE to .c translater not part of compiler
and can be used as separate module to translate generated PCODE,
f.e. .hrb files.
Maybe in the future we will change the compiler to generate meta
code not directly PCODE and it will be possible to make optimizations
on this meta code which will depend on selected output type:
VHM PCODE, C code, .NET code, etc. but at this moment adding support
for .c compilation directly into compiler will make the compiler code
too much complicated for me - IMHO it's better to invest time into
clear separation to FRONT_END->REAL_COMPILER->BACK_END
Please make test with your code. I rebuild whole Harbour code with
-gc3 set in HB_FLAGS in harbour/config/rules.cf and all seems to
work correctly. hbtest returns exactly the same results.
I also made tests with my programs and they work correctly but
I had to define actions for all PCODEs and it's possible that made
some typos in some of them which are very seldom used so your tests
will be very important.
* harbour/config/rules.cf
* harbour/config/bsd/gcc.cf
* harbour/config/darwin/gcc.cf
* harbour/config/dos/bcc16.cf
* harbour/config/dos/djgpp.cf
* harbour/config/dos/owatcom.cf
* harbour/config/dos/rsx32.cf
* harbour/config/dos/watcom.cf
* harbour/config/linux/gcc.cf
* harbour/config/os2/gcc.cf
* harbour/config/os2/icc.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/bcc32.cf
* harbour/config/w32/gcc.cf
* harbour/config/w32/global.cf
* harbour/config/w32/icc.cf
* harbour/config/w32/mingw32.cf
* harbour/config/w32/msvc.cf
* harbour/config/w32/rsxnt.cf
* harbour/config/w32/watcom.cf
* use F macro extension to extract file name from given macros.
It simplified some rules and allow to use vpath and differ file
locations in GNU Makefiles
* moved the BCC16 excpetion for C_RULE from global rules.cf to
DOS bcc16.cf file
* use mainstd library in MinGW build
* harbour/include/hbapi.h
+ added two new functions: hb_winmainArgInit() and hb_winmainArgGet()
to set/retrieve WinMain() parameters.
+ added hb_strMatchWildExact()
* harbour/source/pp/ppcore.c
* initialized variable to avoid compiler warning
* harbour/source/rtl/console.c
* cleaned comment
* harbour/source/rtl/hbffind.c
! Fixed invalid handle error in Windows when file() fails
(fix borrowed from xHarbour)
* harbour/source/rtl/strmatch.c
+ added hb_strMatchWildExact()
+ added 3-rd parameter <lExact> to WildMatch() - when it's TRUE
WildMatch() will check if given pattern cover the whole string.
Without it it check if pattern is valid prefix only.
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtcrs/gtcrs.h
* harbour/source/rtl/gtsln/mousesln.c
* do not call Gpm_GetSnapshot() to avoid stupid message on stderr
generated from GPM library - I lost the the hope that it will be
fixed ;-)
* harbour/source/rtl/gtpca/gtpca.c
* use select() in *nixes for cursor position terminal feedback.
* harbour/source/rtl/gtwin/gtwin.c
* try to always allocate console when compiled without
HB_NO_ALLOC_CONSOLE. It allow to use GTWIN also in real windows
programs.
+ harbour/source/rtl/gtwvt/Makefile
+ harbour/source/rtl/gtwvt/gtwvt.c
+ harbour/source/rtl/gtwvt/gtwvt.h
+ added new GT driver GTWVT - the core of this driver it's Peter Ress
work in xHarbour. In Harbour GTWVT contains only pure GT code without
local to GTWVT xHarbour extensions and GTWVT contrib libraries.
This extensions can be added but later but I want to keep them
separated from the core GTWVT code and add them as upper level GT
which can inherit from GTWVT. Just like I've implemented CTWIN.
Please update non GNU make files and test this GT in Windows.
The programs which want to use GTWVT should be compiled as standard
Windows GUI programs. GTWVT replaces window console code.
if you add to your code:
proc GTSYS()
request HB_GT_WIN
request HB_GT_WVT
return
then the final binaries will be linked with both GT drivers and you
can switch between them using //gt[:]<name> switch. F.e.:
./my_prog //gtwin
or
./my_prog //gtwvt
this feature works in all platforms.
People who works in shell environment (*nixes, MSYS, DJGPP) and use
hb* scripts does not have to use GTSYS() in source code but can simply
use -gt<name> switch in hblnk and hbmk.
* harbour/source/rtl/gtxwc/gtxwc.c
* some minor cleanups and code formatting
* harbour/source/vm/Makefile
+ harbour/source/vm/mainstd/Makefile
* moved mainstd.c to separate mainstd library for MinGW32 build.
Unfortunately MinGW always link main() function if it locate
it in libraries and ignores WinMain() what effectively makes
impossible to create Windows GUI programs if we have main() in
VM library. People who are using MinGW and wants to create only
pure console programs should now include mainstd library to linked
library list.
* harbour/source/vm/cmdarg.c
* harbour/source/vm/mainwin.c
+ added two new functions: hb_winmainArgInit() and hb_winmainArgGet()
to set/retrieve WinMain() parameters.
