* harbour/source/common/hbwince.c
! fixed typo in GetDriveTypeA()
* temporary disabled GetDriveTypeW() call because not all CRTLs for
WinCE support it
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* added full expression list stripping - it enables optimizations
in few additional places
! fixed code to always refresh expression address after direct or
indirect reduction - seems that we have some memory leaks and
possible GPFs not located so far
Please make tests with your code.
* harbour/include/hbexpra.c
+ added support for HB_ENUM*([@]<varname>) functions - disabled
by default can be enabled by HB_USE_ENUM_FUNCTIONS macro
* harbour/source/rtl/gttone.c
* use assembler code for tone emulation for POCC/XCC compiler only
for X86 platforms
* harbour/source/rtl/filesys.c
* do not include <share.h> for POCC/XCC
* harbour/source/compiler/gencli.c
* pacify warning
* harbour/config/w32/owatcom.cf
* harbour/config/w32/xcc.cf
* updated description in header files
+ harbour/config/w32/pocc.cf
+ added support for Pelles ISO C Compiler
* harbour/source/rtl/errorapi.c
+ added protection against possible GPF when some assign methods
were called without parameters
* harbour/source/rdd/workarea.c
* initialize uiFalgs also when DBS_FLAGS is not set
* harbour/contrib/bmdbfcdx/bmdbfcdx1.c
* fixed hb_cdxSkipFilter() declaration - it should be 'static' function
* harbour/source/pp/ppcore.c
* harbour/source/compiler/ppcomp.c
+ added support for changing all -k? switches by #pragma, f.e.;
#pragma -ks+
#pragma -kM-
#pragma -kx1
#pragma -kJ0
* harbour/source/compiler/hbusage.c
* changed -ks description
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* do not generate error message for negative indexes and
[] operators are used for simple types when -ks option
is used
* harbour/include/hbvmpub.h
* harbour/include/hbapi.h
* harbour/source/vm/hvm.c
* harbour/source/vm/extend.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/memvars.c
+ added HB_IT_DEFAULT flags - it allows to check if item was changed
* harbour/source/vm/memvars.c
* harbour/include/hbvm.h
! fixed HB_IT_MEMOFLAG updating to be Clipper compatible. Here we are
not Clipper compatible in one place: in clodeblock local parameters
with memo values are marked as MEMO but if you leave function where
codeblock were created then Clipper during detaching removes MEMO
flag. In Harbour memo flag is kept.
* harbour/include/hbvm.h
* harbour/source/vm/classes.c
* harbour/source/vm/hvm.c
% improved speed of extended references used for SETGET methods
and overloaded [] operators
* harbour/include/hbapi.h
* harbour/include/hbsetup.ch
* harbour/source/compiler/hbcomp.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* harbour/source/vm/cmdarg.c
* removed HB_COMPAT_XHB flags - only one HB_COMPAT_XHB still exist
in HVM in hashes.c - it will be removed soon.
* harbour/source/common/hbverdsp.c
* removed information about xHarbour compatibility mode - it's not
longer used. We are emulating xHarbour behavior using external
XHB library and standard compiler/HVM features
* harbour/contrib/xhb/xhb.ch
* harbour/contrib/xhb/xhbfunc.c
* harbour/source/vm/arrayshb.c
* moved XHB_AINS(), XHB_ADEL() from XHB lib to HVM as HB_AINS(), HB_ADEL()
* harbour/contrib/xhb/xhb.ch
+ added #pragma -ks+
+ added transaltion for hb_enumindex( <enumvar> )
+ harbour/contrib/xhb/xhbenum.c
+ added emulation for HB_EUMMINDEX()
* harbour/contrib/xhb/xhbfunc.c
* do not add INET*() function wrappers for DOS builds or when
HB_NO_DEFAULT_INET macro is set
* harbour/contrib/xhb/xhbmsgs.c
* added comment
* harbour/contrib/Makefile
+ added TIP and XHB
* harbour/make_rpm.sh
* harbour/harbour.spec
* removed HB_COMPAT_XHB, --with tip, --with xhb
they are not longer necessary
* harbour/include/hbapi.h
* harbour/include/hbexpra.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macrolex.c
* harbour/source/vm/macro.c
- removed hb_macroIsIdent()
+ added hb_macroTextSymbol()
! fixed old bug (it exists in all [x]Harbour versions) in macrocompiler
which caused HVM stack corruption
* generate from lexer symbols which are well formatted
(uppercase and size <= HB_SYMBOL_NAME_LEN)
% use hb_dynsymGetCase() instead of hb_dynsymGet()
% some minor speed improvement
* harbour/source/rtl/gtwin/gtwin.c
% use hb_dynsymFind() instead of hb_dynsymFindName()
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/wafunc.c
* reenabled by default strict clipper compatible behavior for
code select(), dbSelectArea() and alias allocating
* harbour/source/rdd/dbf1.c
+ added DBI_ISENCRYPTED for tables encrypted by SIX3
* harbour/source/rtl/hbinet.c
! added missing break (Ron fix from xHarbour)
* harbour/TODO
* removed some not longer necessary TODO/TOFIX
* harbour/common.mak
* harbour/source/rtl/Makefile
- harbour/source/rtl/memoline.c
- harbour/source/rtl/mlcount.c
- harbour/source/rtl/mlctopos.c
- harbour/source/rtl/mlpos.c
- harbour/source/rtl/mpostolc.c
+ harbour/source/rtl/mlcfunc.c
* new version of memo line functions:
MEMOLINE(), MLCOUNT(), MLPOS(), MLCTOPOS(), MPOSTOLC()
* harbour/include/hbexpra.c
! fixed in HB_COMPAT_XHB build hb_enumIndex() used inside internal
FOR/NEXT loop
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
! removed some not longer necessary hack
% added some speed optimizations - it's not done in the way I want to
have in the final version but with some very small modifications it
should make people using a lot of #[x]translate (Enrico ;-)) happy.
* harbour/source/rtl/set.c
* minor cleanup in HB_SET_EOL initialization
* harbour/source/vm/hvm.c
* clean MEMO flag in array and hash items created by { MEMOFILED, ... }
or { "KEY" => MEMOFILED, ... } and optimized results of PLUS operation
* harbour/utils/hbtest/rt_misc.prg
* SET EOL to CHR(13) + CHR( 10 ) before MLCTOPOS() tests to avoid false
alarm on platforms with differ default EOL
* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbpp.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbmain.c
* harbour/source/pp/ppcore.c
+ added support for extended multiline codeblocks:
{ |<params,...>| <EOL>
<statement1>
...
<statementN>
return <val>
}
Such codeblocks allow nested definitions. They can also have their
own variable declarations (local, static, field, memvar, parameters,
private, public) and visibility of declared variables is similar to
nested function in Pascal but please note that there is one limitation
which exists also for normal codeblocks (Clipper compatible behavior):
internal codeblock local parameters and local variables cannot be
used in nested codeblocks, f.e. such code:
eval( { |p| eval( {|| qout( p + 1 ) } ) } )
is illegal in Clipper and Harbour. This limitation also can be
eliminated but but it will be necessary to make deeper modifications
in code for local detaching changing the method of generating
codeblocks local variables in nested blocks so unlike the above
also some modifications in HVM will be necessary.
Please test.
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbmain.c
* changed code used for variable scoping - now it's much more
simple (only one function) and allows to use declarations in
nested functions/codeblocks with visibility similar to Pascal
! fixed parsing FILED <fields,...> IN <alias>
we were accepting code like:
FIELD f1, f2 IN db1, f3 IN db2 IN db3
and for all fields the last alias (db2 in this example) was used
! fixed calculating number of static variables with -b (debugger)
compilation (number of file wide statics were doubled)
! fixed generation of static variable names for debugger when declared
with array dimensions, f.e.:
static sVar[3]
* harbour/source/rtl/hbffind.c
* minor cleanup *nix version
* harbour/contrib/bmdbfcdx/bmdbfcdx1.c
! fixed casting for C++ compilation
* harbour/source/rdd/dbfdbt/dbfdbt1.c
* updated for some old API modifications (this library is not used now
but if we keep it in CVS then I think it should be updated)
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbopt.c
! reverted fix for unnecessary -W2 warning:
Function '...' does not end with RETURN statement
in code like:
func f(v)
if v
return "TRUE"
else
return "FALSE"
endif
Sorry but I had to make it because this fix was wrong and causes
that code like:
func f(v)
if v
? v
else
return "FALSE"
endif
was compiled without any warnings but wrong PCODE was generated.
In some spare time I'll try to implement valid RETURN detection,
now simply add RETURN NIL at the end of such functions - it will
be removed by dead code eliminator.
! fixed memory leak when more then one .prg file was given as compiler
parameter
+ cleaned some code for future modifications
* harbour/source/macro/macro.y
+ added small hack for two BCC/OW warnings
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* regenerated with modified Bison version which should give code
without BCC warnings - I cannot promise I'll keep it in the
future but I will try.
* harbour/source/rdd/dbcmd.c
! use default RDD instead of current one in COPY TO and APPEND FROM
* harbour/source/vm/classes.c
* added support for (@func()):eval(...)
* harbour/common.mak
* updated for new files - please check
* harbour/harbour.spec
* added compiler library
* harbour/bin/pack_src.sh
* harbour/bin/hb-func.sh
* updated for new files and libraries
* harbour/config/w32/mingw32.cf
* harbour/config/w32/watcom.cf
* harbour/config/w32/xcc.cf
* added winsock libraries
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added hb_cdpicmp() - not case sensitive version of hb_cdpcmp()
* harbour/include/hbapiitm.h
* harbour/source/vm/itemapi.c
+ hb_itemStrICmp(), hb_itemCopyFromRef(), hb_itemMoveFromRef()
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbvmpub.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/macro/macrolex.c
* harbour/source/vm/Makefile
* harbour/source/vm/arrays.c
* harbour/source/vm/asort.c
* harbour/source/vm/classes.c
* harbour/source/vm/eval.c
* harbour/source/vm/garbage.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/macro.c
+ harbour/source/vm/hashes.c
+ harbour/source/vm/hashfunc.c
+ added hash items, f.e.:
local h1 := {=>}, h2 := { "a"=>1.234, "b"=>2.345 }
? h2[ "a" ], h2[ "b ]
+ added support for DYNAMIC function declaration - it allow to define
functions which are lately bound at runtime, f.e.:
/*** t01.prg ***/
dynamic func1
proc main()
local h:=__hrbload("t02.hrb")
? func1()
return
/*** t02.prg ***/
func func1
return "Hello!!!"
% use new FUNCALL structure to hold EXTERNAL and DYNAMIC functions,
it reduce memory usage, FUNCALL is much smaller then FUNCTION
% use symbol scope bits when possible instead of making some linear scan
+ added new enumarator message: __ENUMKEY - it allow to access
key value when hash item is base enumerator value, f.e.:
proc main()
local v, h:={"a"=>1.000,"b"=>2.000,"c"=>3.000}
heval( h, { |k,v,i| qout( k, v, i ) } ); ?
for each v in h
? v, "=>", v:__enumKey(), v:__enumValue(), v:__enumIndex(), ;
valtype(v:__enumBase())
v += 0.123
next
? ;heval( h, { |k,v,i| qout( k, v, i ) } )
return
+ added C level hb_hash*() functions
+ added support for full HASH item cloning and updated array cloning
to also clone nested hashes - please note that xHarbour does not do
that, in xHarbour ACLONE() clones _ONLY_ nested arrays and HCLONE()
_DOES_NOT_ clone _ANY_ nested items.
* harbour/include/hbextern.ch
+ added hash functions HB_H*()
* changed INET*() functions to HB_INET*()
+ added hash functions H*() and socket functions INET*() when
HB_COMPAT_XHB is set
* harbour/include/hbtypes.h
+ added missing HB_EXTERN_BEGIN / HB_EXTERN_END
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
! added protection against automatic word concatenation in some cases
! fixed preprocessing expressions when match marker matches ';' token
* harbour/source/rtl/Makefile
+ harbour/source/rtl/itemseri.c
+ added functions for item serialization: HB_SERIALIZE() and
HB_DESERIALIZE() - these function are not binary compatible
with xHarbour functions with the same names but make very
similar job with the exception to serialization of codeblock
and object variables - Harbour does not allow to serialize
codeblocks and serialize objects as arrays.
In most cases these functions can replace the xHarbour ones
+ added HB_DESERIALBEGIN() and HB_DESERIALIZE() functions covered
by HB_COMPAT_XHB macro - this functions are only for compatibility
with existing xHarbour code, In Harbour HB_DESERIALBEGIN() is
dummy function which returns first parameter and HB_DESERIALNEXT()
is a simple wrapper to HB_DESERIALIZE() so it's not necessary to
use them.
* harbour/source/rtl/hbinet.c
* changed INET*() functions to HB_INET*() and enable them for default
build
+ added INET*() functions wrappers covered by HB_COMPAT_XHB macro
* harbour/source/rtl/hbrandom.c
+ added HB_RANDOMINT() - xHarbour compatible
* harbour/source/rtl/len.c
+ added support for HASHes
* harbour/source/rtl/valtype.c
+ added support for HASHes
+ added set of HB_IS*() functions - they are a little bit faster then
calling VALTYPE( v ) == <cVal>
- removed HB_ISBYREF() - this function cannot longer work, it was using
a Clipper incompatible anomalies in passing variables by reference I
fixed so it has to stop to work. If it will be realy necessary to
implement HB_ISBYREF() function then please inform me - it will have
to be done at compiler level or with some much deeper HVM stack
checking.
* harbour/source/vm/extend.c
! fixed hb_extIsArray() and hb_extIsObject() to work well with
parameters passed by reference.
Please note that now hb_extIsArray() return TRUE only for pure arrays
not object values.
* harbour/contrib/Makefile
+ harbour/contrib/tip/Changelog
+ harbour/contrib/tip/Makefile
+ harbour/contrib/tip/atokens.c
+ harbour/contrib/tip/base64x.c
+ harbour/contrib/tip/cgi.prg
+ harbour/contrib/tip/client.prg
+ harbour/contrib/tip/credent.prg
+ harbour/contrib/tip/cstr.prg
+ harbour/contrib/tip/encb64.prg
+ harbour/contrib/tip/encmthd.c
+ harbour/contrib/tip/encoder.prg
+ harbour/contrib/tip/encqp.prg
+ harbour/contrib/tip/encurl.prg
+ harbour/contrib/tip/ftpcln.prg
+ harbour/contrib/tip/hbhex2n.c
+ harbour/contrib/tip/httpcln.prg
+ harbour/contrib/tip/mail.prg
+ harbour/contrib/tip/popcln.prg
+ harbour/contrib/tip/smtpcln.prg
+ harbour/contrib/tip/tip.ch
+ harbour/contrib/tip/url.prg
+ harbour/contrib/tip/utils.c
+ added TIP library - code borrowed from xHarbour
Please test - a lot of above code is not well tested, also some peaces
were written over year ago for different things (f.e. serialization for
NETRDD) and now I collected them and committed.
The TIP library was not tested at all. It can be compiled but I cannot
say if it works - I hope that people familiar with it can make necessary
test and fixes.
It's also not the final version of low level HASH item code. I'm working
on more efficient structure which uses binary tries but I cannot say when
I'll finish it (maybe in this weekend or maybe in next year) so I committed
working version now even if I'm not happy with overall performance (BTW
not worser then in xHarbour)
* harbour/include/hbexpra.c
* emulate xHarbour HB_ENUMINDEX() inside FOR EACH loop when
HB_COMPAT_XHB macro is set
It's only for compatibility - I strongly suggest to use
<unumvar>:__enumIndex()
which is more flexible and allow to chose the enumerator
variable not only the one from last loop
* harbour/include/hbexprb.c
* added comment removed from hbexpra.c
* harbour/source/compiler/hbmain.c
! fixed GPF which can appear when -b option is used in line numbering
inside codeblocks
* harbour/common.mak
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/bin/hb-func.sh
* harbour/config/global.cf
* harbour/include/error.ch
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
- harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/source/Makefile
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
- harbour/source/compiler/exproptc.c
- harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbgenerr.c
+ harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbpcode.c
* harbour/source/macro/Makefile
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
- harbour/source/macro/macroc.c
+ harbour/source/main/Makefile
+ harbour/source/main/harbour.c
* harbour/source/vm/macro.c
* resolved name conflicts between compiler and macro compiler.
Now new compiler library is created.
There are some things which can be improved and cleaned yet
but it's enough to create single binaries with compiler+HVM+RTLs.
I updated non GNU make files but I cannot tested the modifications
- please check and fix me if necessary
* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/hbdate.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/rtl/abs.c
* harbour/source/rtl/at.c
* harbour/source/rtl/chrasc.c
* harbour/source/rtl/datec.c
* harbour/source/rtl/dateshb.c
* harbour/source/rtl/diskspac.c
* harbour/source/rtl/disksphb.c
* harbour/source/rtl/gtfunc.c
* harbour/source/rtl/left.c
* harbour/source/rtl/len.c
* harbour/source/rtl/math.c
* harbour/source/rtl/minmax.c
* harbour/source/rtl/mod.c
* harbour/source/rtl/philes.c
* harbour/source/rtl/philesx.c
* harbour/source/rtl/replic.c
* harbour/source/rtl/round.c
* harbour/source/rtl/set.c
* harbour/source/rtl/space.c
* harbour/source/rtl/strcase.c
* harbour/source/rtl/strpeek.c
* harbour/source/rtl/transfrm.c
* harbour/source/rtl/trim.c
* harbour/source/rtl/type.c
* harbour/source/rtl/val.c
* harbour/source/rtl/word.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* added some PCODEs to cover all possible combination of ++, --, <op>=
operations in the same way and keep Clipper compatible RT errors.
* added some other PCODEs to optimize some commonly used expressions/
statements
* use HB_ERR_ARGS_BASEPARAMS instead of hb_paramError()
* some other cleanups and minor optimizations
* harbour/utils/hbtest/rt_math.prg
* update expected result for MOD() - it was not Clipper compatible and
it will be hard to make it compatible without introducing some Clipper's
side effects
* harbour/contrib/libct/ctc.c
* harbour/contrib/libct/files.c
* harbour/contrib/libnf/ftattr.c
* harbour/contrib/libnf/n2color.c
* cleaned some BCC warnings
* harbour/include/hbapi.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbsetup.ch
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/common/hbver.c
* harbour/source/common/hbverdsp.c
* harbour/source/compiler/hbcomp.c
* harbour/source/vm/arrays.c
* harbour/source/vm/arrayshb.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/hvm.c
! fixed Harbour support for accessing string characters with array
index operators []
+ added support for #define HB_COMPAT_XHB - it's disabled by default.
When set it enables some of xHarbour features like negative array
indexes calculated from tail, accessing string characters with []
operators (warning it's not compatible with default Harbour version
enabled by -ks during compilation and //flags:s at runtime - in
xHarbour compatibility mode "ABC"[2] returns "B" when in Harbour 66)
and some other minor features.
* harbour/source/compiler/cmdcheck.c
* added support for optional setting C output type in -go switch
Now it accepts optional digit [0123] after -go in the same way
as -gc, f.e.: -go3
* harbour/source/compiler/harbour.c
* call hb_compExprLstDealloc() only when errors appeared during
compilation - it disable automatic freeing all allocated expressions
in clean compilation. I make it intentionally for easier detecting
problems one some expressions are not freed. So far the final cleanup
code always deallocated expressions what can hide some real bugs.
* harbour/source/vm/hvm.c
! fixed very serious bug in HVM closing. The s_uiActionRequest flag
was not cleared before hb_rddShutDown() so when RDD buffers were
hot and flushing required some PCODE evaluation (f.e. index KEY
or FOR expression) then they were not properly evaluated.
* harbour/source/vm/macro.c
* minor improvement
* harbour/utils/hbtest/rt_misc.prg
! fixed one of expected result, it was neither Harbour nor Clipper
result (I've just made some test with Clipper), I do not know why
it existed
* harbour/include/hbexpra.c
! fixed GPF which can appear on syntax error during compilation
one of enumerator message
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* accept the folowing syntax: (@var):msg
With this modification FOR EACH overloading is completed.
* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbusage.c
* harbour/source/compiler/ppcomp.c
* harbour/source/macro/Makefile
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/vm/macro.c
* harbour/source/vm/memvars.c
* harbour/source/vm/memvclip.c
* keep prefix definition for bison public symbols in *.y files instead
of passing them as bison arguments to avoid possible mistakes during
*.yy[hc] file generation
! fixed iif() reduction when used as single function parameter
+ add -kM compiler switch - turn off macrotext substitution
* updated <string> + <string> optimization and other macrotext usage
to keep more Clipper compatible behavior
! fixed typo in expression type checking in IIF() reduction - it was
working because wrongly used macros has the same values as the valid
ones
- removed compiler switches and macros for old HB_INLINE() syntax - it
was not supported after last months modifications. Only:
HB_INLINE([params,...]) { C code }
is supported.
! fixed passing parameters by reference in IIF() statement and macro
compiler. The following valid Clipper code:
&("myfunc(<exp>, @var1, @var2)")
was not supported
! do not allow to use references or empty expressions in expression list
AFAIK it's Clipper compatible. If I'm wrong then please fix me but
Clipper allows to use references only as function arguments, 2-nd and
3-rd IIF() argument and as directly created array items ( {...@var...} )
DO ... WITH ... is a special case of function call.
! Changed grammar rules to accept only Clipper compatible parameters.
! fixed typo in macro name in hb_memvarNewParameter() function.
* use HB_FUNC_EXEC(...) instead of HB_FUNCNAME(...)()
* harbour/include/hbcompdf.h
+ added comment
* harbour/include/hbexpra.c
* change expression type for <exp> = <exp> from HB_EO_EQUAL
to HB_EO_ASSIGN in hb_compExprGenStatement() function so
later we can safely make all optimization in hb_compExprUseEqual()
during reduce process - optimization only when PCODE is generated
is too late and causes that expressions like:
iif( 1 = 1, <exp>, <exp> )
are not reduces (Clipper reduce them)
* do not execute hb_compFunCallCheck() in hb_compExprNewFunCall()
to avoid repeating the same error message in hb_compExprUseFunCall()
* harbour/include/hbexprb.c
* enabled reduction for hb_compExprUseEqual() and generate errors
when it's used as statement
* harbour/source/common/expropt2.c
* added some missing reductions for expressions like: NIL == NIL
* harbour/source/common/reserved.c
% very basic optimization: use binary search instead of linear
scanning for reserved words and shortcuts - it gives noticeable
speed improvement in macro compiler
* harbour/source/compiler/complex.c
* changed the order of special keywords to keep alphabetic sorting
* harbour/source/compiler/harbour.c
% some minor optimizations in aliased expressions
! added protection in hb_compIsJump() to avoid possible problems
when this function is executed after replacing some code with
jumps by series of NOOPs in optimizations process
* harbour/source/compiler/hbfix.c
* better optimization of PCODE generated for logical expressions
* harbour/source/compiler/hbfunchk.c
% use binary search instead of linear scan
* harbour/source/rtl/minmax.c
! fixed GPF when MIN() or MAX() function is called with less then
two parameters
* harbour/source/vm/itemapi.c
* minor optimization and formatting
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/source/common/expropt1.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbgenerr.c
* harbour/source/macro/macro.l
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/macro/macrolex.c
* harbour/source/vm/macro.c
* final grammar cleanup: removed unused and/or unnecessary grammar
expressions in *.y files, fixed some differences between compiler
and macrocompiler, fixed some other bugs, typos, clipper
incompatibilities, etc.
It's end of year, it's late and sorry but I'd like to begin making
something absolutely differ then creating detail description ;-)
If you will have any questions then I'll answer in new year.
* harbour/source/rdd/dbffpt/Makefile
* small hack for XCC compilation
best regards and happy new year,
Przemek
* harbour/include/hbcompdf.h
* removed not longer used pFunCall from asMacro expression.
This item was used only in a very old s:="1,2";f(&s) implementation.
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* a little bit more simple implementation of passing optional arguments
and simplified some code. Now they can be used in any place in argument
list (also repeated). It's also possible to create arrays using "..."
as array element(s), f.e.: func f(...); return { "{", ..., "}" }
If you think it will be usable then I can also add support for accessing
array items with optional parameters, f.e.: ? a[ ... ]
so it can be used in the same context as xbase++ like macro lists
but for this I will need new PCODE so I'd like to hear your opinion
ASAP - I'm closing any extensions today.
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/hvm.c
+ added support for passing optional parameters to called function, f.e.:
proc p( a, b, ... )
qout( a, b, "X", ... )
* forbid creating function pointer when function is used with parameters,
f.e.: x:=@f1(1,2,3)
* harbour/source/compiler/complex.c
* cleaned all restrictions on reserved words I've found - if I missed
sth then please inform me. The previous behavior and some error
messages are used with -kc compiler switch
* harbour/source/rtl/symbol.prg
* harbour/source/rtl/tobject.prg
! eliminated limitations in number of constructor parameters
(new syntax with passing optional parameters used)
* harbour/include/hbexprop.h
* harbour/source/common/expropt1.c
+ added hb_compExprParamListLen()
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* use hb_compExprParamListLen()
* harbour/include/hbexprc.c
* generate error message for syntax like:
o:var()++ or o:var()+=10
only:
o:var++ and o:var+=10
is supported, just like for @o:var
* harbour/include/hbapi.h
* harbour/source/common/hbstr.c
+ hb_numDecConv() used to convert double value to/from binary integer
fields with fixed number of decimal places
* harbour/common.mak
* harbour/include/hbapicdp.h
* harbour/source/codepage/Makefile
+ harbour/source/codepage/cptrdos.c
+ harbour/source/codepage/cptrwin.c
* harbour/source/lang/Makefile
+ harbour/source/lang/msgtrdos.c
+ harbour/source/lang/msgtrwin.c
+ added Turkish CPs and MSGs created by Bicahi Esgici
+ harbour/source/codepage/uc1254.c
+ harbour/source/codepage/uc857.c
+ added unicode tables for Turkish CPs
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/workarea.c
+ added support for decimal places in binary integer fields ("I")
! fixed currency field decoding ("Y") - it's integer binary value
not IEEE758 double. Warning: on write the value is rounded not
truncated like in VFP.
* harbour/config/w32/bcc32.cf
* cleanup
+ harbour/config/w32/xcc.cf
+ added XCC support
* harbour/contrib/btree/hb_btree.c
* use hb_vmAtInit()/hb_vmAtExit() instead of INIT/EXIT functions defined
from C code
* harbour/contrib/libct/tab.c
* casting
* harbour/contrib/odbc/odbc.c
! removed #include <malloc.h> - it should not be used with new C
compilers
I think that we should replace this library with hbodbc from xHarbour.
* harbour/contrib/ole/ole2.c
* updated for XCC
* harbour/include/hbdefs.h
* include stdint.h if available
* harbour/source/compiler/complex.c
! fixed yet another stupid mistake in WITHOBJECT token
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/hvm.c
+ added HB_P_SWAP <n> PCODE
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
! fixed GPF during compilation of @:var, @:&var, @o:&var
+ added support for @o:&var and @:var, @:&var inside WITH OBJECT
statement
* changed PCODE generated of ++,--,+=,-=,...
Now left side expression is evaluated _ONLY_ once and when object
messages are used it's guarantied that exactly the same object
variable will be used. It also fixes some problems which exists
in Clipper. This optimization is enabled by -kh flag (by default)
and can be disabled with -kc.
% optimize ald macros in ++,--,+=,-=,... operations
* add automatically "_" prefix when macro message is used in assignment
context, f.e.:
s:="osCode"
o:=errorNew()
? o:&s
o:&s := 100
? ++o:&s
? o:&s *= 5
* harbour/include/hblang.ch
- removed #xtranslate - this file is included by C code and some C
compiler do not like unknown directives
* harbour/utils/hbtest/rt_math.prg
+ added test code for <op>assign and (pre/post)(inc/dec)rementation,
macro messages and WITH OBJECT
* harbour/source/compiler/harbour.c
* harbour/source/rdd/dbf1.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* casting and warning cleanup
* harbour/utils/Makefile
+ added $(HB_UTILS)
- harbour/utils/hbpp/hbpp.h
+ harbour/utils/hbpp/hbppdef.h
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/hbpptbl.c
* harbour/utils/hbpp/pragma.c
* renamed hbpp.h to hbppdef.h to avoid possible conflict with hbpp.h
in include directory
* casting and warning cleanup
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbdefs.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/common/hbstr.c
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/rtl/console.c
* harbour/source/rtl/isprint.c
* harbour/source/rtl/left.c
* harbour/source/rtl/right.c
* harbour/source/rtl/strtran.c
* harbour/source/vm/codebloc.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* general PCODE cleanup and address most of TODO/TOFIX notes in
source code:
! fixed GPF traps when too long string or codeblock is generatd
+ added support for 16MB codeblocks and strings
! removed macrocompiler limitation for jumps range
! fixed GPF when more then 255 local variables is used and added
support for 2^15 locals
! removed all strtok() functions
% added optimization for all +=, -=, *=, %=, ^=, **= operations
when left side of expression is variable or array item
% added optimization for all +=, -=, *=, %=, ^=, **= operations
when left side of expression is object method and updated ++, --
for new code. It's still disabled until we will not add support
for late evaluated reference items to HVM
! fixed a[++i]++ and similar operations (a[++i]*=2, ...). Now ++i is
executed only once. It's not Clipper compatible but it was in
TODO note in source code. It can be disabled by -kc option
* finished support to xHarbour like #pragma TEXTHIDDEN(1)
! fixed local add int optimization when PARAMETERS used after
optimization changed local variable number over 255
! fixed GPF trap when in HB_P_<op>EQ PCODEs when executed for
direct values
* others
! fixed problems reported by Chen
* optimized strtran(), left(), right() to not create new string copy
when the same value is returned
* harbour/bin/pack_src.sh
+ added packing *.yy[ch] files
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbpp.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbgenerr.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/pp/ppcore.c
+ added hb_comp prefix to grammar/lexer compiler public functions to
reduce possible conflict with 3-rd party code which may use default
yy prefix.
! do not use bison destructors for expressions. Internal bison logic
cannot properly detect if expression was used or not in some of our
grammar rules and it's possible that some expressions will not be freed
and some other freed twice.
! added protection against multiple destructors execution for CBSTART
and LITERAL tokens
* added small garbage collector for deallocating expressions which were
not freed (such situation can happen in syntax errors)
% some optimizations in used structures to reduce their sizes
+ added protection against execution PCODE optimizations for functions
which were not cleanly compiled.
* harbour/source/rtl/idle.c
* use const in nanosec() timeout declaration
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/macro/macro.y
+ added support for strings with with ASCII NUL character
Strings with ASCII NUL character are not stored with hash table
but dynamically allocated/deallocated
! fixed compilation of strings with ASCII NUL character which
can appear in escaped strings e"..." or after compiler chr(0)
optimization
% removed some not longer necessary memory allocations
* harbour/source/vm/macro.c
! fixed GPF caused by HB_MACRO structure double freeing
- removed some code which was added as workaround for the old
behavior of HVM QUIT and false FM stat memory leak reports.
It's not longer necessary in current HVM.
* harbour/source/common/hbstr.c
! fixed final string size calculation in extended strings
* harbour/source/compiler/gencli.c
* cleaned BCC warning
* harbour/config/bsd/gcc.cf
* harbour/config/darwin/gcc.cf
* harbour/config/dos/djgpp.cf
* harbour/config/dos/owatcom.cf
* harbour/config/hpux/gcc.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/owatcom.cf
* harbour/config/os2/gcc.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/bcc32.cf
* harbour/config/w32/gcc.cf
* harbour/config/w32/mingw32.cf
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbver.h
* harbour/source/common/hbstr.c
* harbour/source/common/hbver.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genjava.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
- harbour/source/compiler/harbour.simple
- harbour/source/compiler/harbour.slx
- harbour/source/compiler/harbour.sly
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbgenerr.c
- harbour/source/compiler/hbslex.c
- harbour/source/compiler/hbstrong.c
* harbour/source/compiler/hbusage.c
- harbour/source/compiler/simplex.c
* harbour/source/macro/Makefile
- harbour/source/macro/macro.slx
- harbour/source/macro/macroslx.c
* harbour/source/pp/ppcore.c
* harbour/utils/hbpp/hbppcomp.c
- removed SIMPLEX references
! fixed memory leak in request _GET_
* use hb_compIdentifiersNew() in INLINE and AUTOOPEN structures
members
* eliminated all internal exit() calls. Now hb_compGenError() with
fatal errors does not interrupt application but only sets
HB_COMP_PARAM->fExit = TRUE;
What should cause silent clean application close.
Please keep it in mind making future modifications and do not
introduce and exit() function call.
+ added support for \x<hex> and \<oct> quoting in extended strings
(just like in C). Warning !!!. Embedded 0 bytes are supported by
PP, lexer and expression optimizer but not by bison. To make them
working it will be necessary to change Literal terminal symbol
holder and add length field in bison rules and also change the hash
table used to hold identifiers, literals and macros to store and use
real string length. If someone will try to use strings with embedded
0 now then they will be cut but nothing worser should happen.
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
+ harbour/include/hbcompdf.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbpp.h
* harbour/include/hbvm.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genjava.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.l
* harbour/source/compiler/harbour.y
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbfunchk.c
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hbident.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/ppcomp.c
* harbour/source/macro/macro.y
* harbour/source/pp/ppcore.c
* harbour/source/pp/ppgen.c
* harbour/source/pp/pplib.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/estack.c
* harbour/source/vm/fm.c
* harbour/source/vm/macro.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbpp.h
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/pragma.c
* changed the internal compiler API to be MT safe.
All global and static non constant variables replaced by
HB_COMP structure which have all compiler context settings.
It's possible to allocate simultaneously many compiler contexts
and compile code. Only constant/read only variables are shared.
In macro compiler HB_COMP is replaced by HB_MACRO.
In source code I everywhere used to macros: HB_COMP_DECL and
HB_COMP_PARAM which are equivalents of old HB_MACRO_DECL and
HB_MACRO_PARAM definitions.
We will only have to change compiler FATAL errors support to
not execute exit() for non batch systems.
* make macro compiler fully MT safe
* removed not longer used definitions and variables
! add direct accessing to PP line number information - it fixes missing
line numbers reported recently
! added generating .ppo files when tokens are teken directly by compiler
- it fixes empty .ppo file problem
! clear hb_stack internall variables after removing hb_stack to avoid
possible GPF if application still works and try to access unexsiting
hb_stack
! do not allocate new memory block when final FM statistic report is
generated - it fixes problem with GPF when application compiled with
FM statistic exits and CLIPPER envvar is set.
! fixed memory leak hb_cmdargCheck()
! added to harbour.y symbol destructors - it should fixes memory leaks
in syntax errors but it uses quite new bison feature which is not
fully supported yet. Unfortunately it's also not MT safe and the
destructors implementation in 1.875c does not respect %parse-param.
Bison documentation says that it should so I hope it will be fixed
soon (or maybe even already is in the newest bison versions) before
I'll add multi context compilation support. If not then I will have
to add some workaround. I can pass compiler context pointer inside
YYSTYPE using hack in a lexer but it will force really huge number
modifications in existing bison rules so probably it will be much
easier to fix bison or write a small tool to update generated parser.
* other modifications - the total size of patch is nearly 1MB and
detail description will have to take me few days.
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/source/macro/macro.y
* harbour/source/macro/macrolex.c
* do not allocate separate memory in macro compiler for terminal
symbols which needs string representation - it fixes some set
of memory leaks and increase a little bit macro compilation
! fixed accessing freed memory in:
private cMacro := "cEarly", cEarly := {"Early"}
@ 12,10 GET &cMacro[1]
! fixed GPF in:
p:=@left()
and similar expressions
* harbour/source/common/expropt2.c
% minor modification
* harbour/source/compiler/harbour.c
! fixed HB_TRACE message
eg:
o:&send()
o:&send.end()
o:&(expr)()
o:&var++
o:&var := 0
o:&(expr)++
WITH OBJECT obj
++:&var
:&var += :&(var2+"oo")
END
NOTICE:
For simple assigments (=,:=), compound assignments (+=,-=,*=,/=)
and for pre/post increment operators( ++,--) the macro should
evaluate to a symbol that starts with underscore '_'.
To access a variable the macro should evaluate to a symbol
with no '_' char.
* harbour/include/hbapi.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* changed support for XBASE++ extended syntax in expressions like:
v:="1,2,3"
x := a[ &v ]
a := { &v }
f( &v )
Now all data is stored on HV * stack without any external registers
which have to be saved/restored or updated in chosen operation.
This modification was necessary to make HV * reentrant safe and it
also eliminated some small overhead caused by old code.
I hope I haven't break anything in compiler - Ryszard please fix me
if I made sth wrong.
* harbour/source/vm/hvm.c
* harbour/source/compiler/harbour.y
* revert FOR/NEXT stop condition to be Clipper compatible
PCODE table has been updated and all .prg code which used modified PCODEs
has to be recompiled
* harbour/common.mak
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/utils/Makefile
+ Added hbpptest
* harbour/utils/hbpptest/pretest.prg
+ Output now goes to STDOUT.
* harbour/source/compiler/harbour.c
! Possible memory leak fixed.
* harbour/source/rtl/Makefile
! Fixed tabs (readded them).
- harbour/source/rtl/dbdelim.prg
+ harbour/source/rdd/dbdelim.prg
- harbour/source/rtl/dbjoin.prg
+ harbour/source/rdd/dbjoin.prg
- harbour/source/rtl/dbsdf.prg
+ harbour/source/rdd/dbsdf.prg
* harbour/source/rtl/Makefile
* harbour/source/rdd/Makefile
* harbour/common.mak
* Moved three RDD related internal function source files
to the RDD library. (They did depend on each other
anyway.)
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/dbfuncs.prg
* harbour/source/rdd/dblist.prg
* harbour/source/rdd/dbsort.prg
* harbour/source/rdd/dbstrux.prg
* harbour/source/rdd/dbtotal.prg
* harbour/source/rdd/dbupdat.prg
* harbour/source/rdd/rddord.prg
* harbour/source/rtl/dbdelim.prg
* harbour/source/rtl/dbedit.prg
* harbour/source/rtl/dbjoin.prg
% Cleanups, minor optimizations.
! __dbApp(), __dbCopy() to return LOGICAL.
! Problem where error condition was not detected if BREAK didn't
set the error object.
! __dbTotal() lRest handling fixed.
! __dbTotal() ErrorBlock overriding removed.
! __dbCreate() now generating default alias.
% __dbCreate() using dbCreate() undoc param to open the tables.
! __dbDelim() return value.
! __dbSDF() return value.
+ CA-Cl*pper undocumented call added: _dtxCondSet()
+ XBase++ compatible calls implemented:
dbJoin(), dbList(), dbSort(), dbTotal(), dbUpdate(), _dbExport()
dbCopyStruct(), dbCopyExtStruct()
+ Added some more 10 chars call stubs:
__dbCopySt(), __dbCopyXS(), __dbOpenSD(), __dbArrang()
+ Comments.
+ Formatting.
; All high-level db functions seems to be compatible now.
DBEDIT() is left TODO for review (refix).
* harbour/source/rtl/tbrowse.prg
* Minor cleanup.
* harbour/include/hbexpra.c
* harbour/source/vm/arrayshb.c
* harbour/source/rdd/dblist.prg
- Removed compiler+RTL __dbList() hack which
made it incompatible with CA-Cl*pper. The
hack targeted an XBase++ extension, but it's
compatible even without the hack. Tested with
XBase++ 1.82.294.
* harbour/source/rtl/typefile.prg
% FUNCTION -> PROCEDURE
+ _TypeFile() XBase++ internal function added.
* include/hbcomp.h
* include/hberrors.h
* include/hbexpra.c
* include/hbexprb.c
* include/hbexprc.c
* include/hbmacro.h
* include/hbpcode.h
* include/hbpp.h
* include/hbxvm.h
* source/common/expropt1.c
* source/compiler/cmdcheck.c
* source/compiler/expropta.c
* source/compiler/exproptb.c
* source/compiler/exproptc.c
* source/compiler/genc.c
* source/compiler/gencc.c
* source/compiler/gencli.c
* source/compiler/genhrb.c
* source/compiler/genjava.c
* source/compiler/genobj32.c
* source/compiler/harbour.c
* source/compiler/harbour.l
* source/compiler/harbour.y
* source/compiler/hbdead.c
* source/compiler/hbfix.c
* source/compiler/hbfunchk.c
* source/compiler/hbgenerr.c
* source/compiler/hblbl.c
* source/compiler/hbpcode.c
* source/compiler/hbstripl.c
* source/macro/macroa.c
* source/macro/macrob.c
* source/macro/macroc.c
* source/vm/hvm.c
* source/vm/macro.c
* fixed compilation of code that uses '@' pass by
reference. The following syntax is no longer supported:
var := IIF( .T., @var, var )
however you can still use the following:
funcall( IIF( bPassbyRef, @someVar, someVar ) )
+added support for the following statement:
WITH OBJECT <objexpression>
...
END
inside this statement you can use simplified form of sending
messages to the object specified by <objexpression>
:message( ) instead objexpression:message()
:property instead objexpression:property
The runtime error will be generated at the time of message
sending (or property access/assign) if <objexpression>
is not a value of type object.
You can use the reserved property:
:__withobject
to access/assign the controlling object.
*fixed support for command line response file (@file.clp)
to be compatible with Clipper (Clipper genertes a single
obj file)
*fixed memory leaks when there is a fatal error in autoopened
module (using DO ... statement)
*implicit startup functions are removed from the list of
functions before generation of output code
* source/pp/ppcomp.c
* source/pp/pplib.c
* source/pp/ppcore.c
* redefinition of #define no longer causes a memory leak
* fixed repeatable optional clauses
#xcommand SET <var1> [, <varN>] WITH <val> =>
<var1>:=<val>[; <varN>:=<val>]
* fixed compilation of optional clauses (when used in different
order then declared) -this fixes the following long
waiting bug:
#command MYCOMMAND [<mylist,...>] [MYCLAUSE <myval>] => ;
MyFunction( {<mylist>} [, <myval>] )
MYCOMMAND MYCLAUSE 321 "HELLO"
* fixed restricted macro match marker <x:&>
* tests/Makefile
- tests/pretest.prg
+ utils/hbpptest
+ utils/hbpptest/Makefile
+ utils/hbpptest/pretest.prg
* moved file 'pretest.prg' from tests to separate directory
to make easier validation of the preprocessor
* TODO
* added note to fix hb_objGetMethod() so it will not generate
error if there is no method
* doc/en/clipper.txt
* added documentation for WITH OBJECT usage
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* indenting
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
! fixed HB_P_MACROPUSHINDEX
- removed hb_vm_iExtraIndex
- fixed GPF in direct uninitialized HB_ITEM usage
- make it safe for HVM reentrant and pending RT errors
There is a set of global hb_vm*Extra* variables which
tries to extend HVM by adding some additional registers
to it. This code does not work as it should even know
and it's absolutely not reentrant safe. It will have to
be fixed before we will have .prg destructor and MT support.
As I can see the same problems has xHarbour.
* include/hbcomp.h
* include/hberrors.h
* include/hbexpra.c
* include/hbexprb.c
* include/hbexprop.h
* include/hbhash.h
* include/hbmacro.h
* include/hbpcode.h
* source/common/Makefile
* source/common/expropt1.c
* source/common/expropt2.c
* source/common/hbhash.c
* source/compiler/expropta.c
* source/compiler/exproptb.c
* source/compiler/genc.c
* source/compiler/harbour.c
* source/compiler/harbour.l
* source/compiler/harbour.y
* source/compiler/hbfix.c
* source/compiler/hbgenerr.c
* source/compiler/hbident.c
* source/compiler/hbpcode.c
* source/macro/macro.l
* source/macro/macro.y
* source/macro/macroa.c
* source/macro/macrob.c
* source/rtl/dates.c
* source/vm/hvm.c
* source/vm/macro.c
+ source/common/hbdate.c
+ tests/ddate.prg
+ tests/switch.prg
+added support for DATE type constants in the following format:
0dYYYYMMDD
for example (see tests/ddate.prg for more):
IF( dDate > 0d20051112 )
+added support for SWITCH command (see tests/switch.prg)
SWITCH <expr>
CASE <integer_expression>
...
[EXIT]
CASE <string_expression>
...
[EXIT]
[OTHERWISE]
...
END
Notice:
- Integer and string expressions can be mixed in a single
SWITCH command with no runtime errors;
- CASE expression have to be resolved at compile time and
the result has to be either an integer or string constant
- if there is no EXIT statement then next CASE is executed
(or OTHERWISE for the last CASE)
For example:
CASE 1+32+2*4
CASE CHR(64)
CASE ASC('A')
CASE "A"+CHR(13)
Notice:
The above changes apply only to FLEX version!
* include/hbapi.h
* include/hbapiitm.h
* include/hbcomp.h
* include/hberrors.h
* include/hbexpra.c
* include/hbpcode.h
* include/hbsetup.h
* source/common/expropt1.c
* source/compiler/expropta.c
* source/compiler/genc.c
* source/compiler/gencli.c
* source/compiler/harbour.c
* source/compiler/harbour.l
* source/compiler/harbour.y
* source/compiler/hbfix.c
* source/compiler/hbgenerr.c
* source/compiler/hbpcode.c
* source/macro/macroa.c
* source/vm/hvm.c
* source/vm/itemapi.c
+ tests/foreach.prg
+ added support for FOR EACH loop
FOR EACH var1 [,var255] IN expr1 [,expr255] [DESCEND]
NEXT
Note:
-expr can be a string or an array
if it is a string then assigments to the control
variable does not change the string
-after the loop the controlling variable(s) store the
value which they had before entering the loop
-the controlling variable supports the following properties
:__enumindex - the loop counter for variable
:__enumbase - the value that is being traversed
:__enumvalue - the value of variable
-see tests/foreach.prg for examples
+ added warnings in cases of duplicated loop variables
eg. FOR i:=1 TO 5
FOR i:=i TO i+5
-removed strong typing in the compiler (xHarbour too)
(reactivate it by compiling with -DHB_COMP_STRONG_TYPES)
NOTE:
The new pcodes were added - rebuild everything
* include/hbexpra.c
* source/compiler/expropta.c
* source/compiler/harbour.c
* source/macro/macroa.c
* source/rtl/tget.prg
* source/rtl/tgetint.prg
* fixed to be more Clipper compatible
* source/rtl/persist.prg
* fixed to not use xBase extensions
* include/hbexpra.c
* source/compiler/expropta.c
* source/macro/macroa.c
* source/vm/macro.c
* fixed bug cousing that some memory was deallocated
more then once
* source/debug/debugger.prg
* fixed support for .T./.F. in command window
* fixed issues when the application was using
SET EXACT ON
+ source/rtl/altd.prg
+new file with ALTD() procedure code
* hrbdll.bc
* hrbdll.vc
* makefile.bc
* makefile.nt
* makefile.vc
* source/rtl/Makefile
*added a reference to rtl/altd.prg
* source/common/hbffind.c
*fixed to compile correctly with HB_OS_UNIX
* include/hbcomp.h
* include/hbexpra.c
* include/hbexprb.c
* include/hbexprop.h
* include/hbpcode.h
* source/common/expropt1.c
* source/compiler/expropta.c
* source/compiler/exproptb.c
* source/compiler/genc.c
* source/compiler/harbour.c
* source/compiler/harbour.y
* source/compiler/hbfix.c
* source/compiler/hbgenerr.c
* source/compiler/hbpcode.c
* source/macro/macro.y
* source/macro/macroa.c
* source/macro/macrob.c
* source/vm/hvm.c
+added missing support for @¯o and @M->memvar
+added new pcode HB_MACROPUSHREF (all sources have to be
recompiled)
* source/debug/dbgtwin.prg
* source/debug/debugger.prg
*fixed procedures callstack when modules with/without debug info
are linked together
*fixed the debugger activation when ALTD() is used in
a module with no debug info (the debugger shows up
on the first line with debug info after the ALTD()
is called)
NOTICE:
Some compilers may require that the debug library has to
be specified as an object file in order to get the
debugger linked in.
