* harbour/source/rtl/set.c
! fixed possible GPF after hb_setListenerRemove()
* removed default: clause in main SET() switch to enable C compiler
warning when not all HB_SET_* cases are defined.
* harbour/source/vm/hvm.c
! fixed bug#1533096 reported by Chen
* harbour/make_b32.bat
* harbour/make_vc.bat
! install call redirected to nul instead of make_b32.log to avoid
overwriting the build results with less important (no) information.
* harbour/include/hbundoc.api
+ Added _txopen() (not tested)
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
! BCC -w warnings fixed.
* harbour/source/rtl/filehb.c
+ Added TOFIX about a CA-Cl*pper incompatibility.
In CA-Cl*pper the argument of FILE() is RTrim()-ed
before doing the check.
* harbour/source/rtl/fstemp.c
! Fixed two BCC warnings.
* harbour/source/common/hbver.c
* extended C compiler information
* harbour/source/compiler/genc.c
* use hb_verHarbour() and hb_verCompiler() to for information
about Harbour build in generated .c files' headers
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
! fixed typo in my last commit - additional dummy evaluations of
EVAL block
* harbour/include/hbdefs.h
* use extern "C" as default for HB_FUNC() declaration in C++ mode.
I know that this modification will interact with binary compatibility
but current state is worser because we were not binary compatible
between C and C++ mode. Now the problem should gone with some
reasonable for me cost. If your compiler uses the same ABI for C and
C++ mode then the backward binary compatibility problem can be resolved
by small tools which can strip C++ decoration from binary libraries or
maybe even linker has necessary switches to ignore them.
* harbour/include/hbexprb.c
* cleaned BCC warning
* harbour/source/rdd/nulsys/nulsys.c
+ added missing hb_rddGetAliasNumber(), thanks to Ron.
* source/compiler/genc.c
* source/compiler/gencli.c
* source/compiler/harbour.c
* generate an empty .c file if there is no valid function
in prg code (when -n is used)
(this fixes error during compilation of browdbx.prg)
* fixed a warning in hb_compStaticGetName
* harbour/source/rtl/dbedit.prg
! Previous non-strict compatible part made fully compatible by
dropping an Eval() on the field value block. Strict branch
and NOTE removed.
* harbour/include/hbapi.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* changed support for XBASE++ extended syntax in expressions like:
v:="1,2,3"
x := a[ &v ]
a := { &v }
f( &v )
Now all data is stored on HV * stack without any external registers
which have to be saved/restored or updated in chosen operation.
This modification was necessary to make HV * reentrant safe and it
also eliminated some small overhead caused by old code.
I hope I haven't break anything in compiler - Ryszard please fix me
if I made sth wrong.
* harbour/source/vm/hvm.c
* harbour/source/compiler/harbour.y
* revert FOR/NEXT stop condition to be Clipper compatible
PCODE table has been updated and all .prg code which used modified PCODEs
has to be recompiled
* harbour/include/hbapirdd.h
* harbour/source/rdd/dbcmd.c
* harbour/source/vm/hvm.c
* do not generate RT errors "Alias does not exist" in constructions
like: ("NOT_EXISTING_ALIAS")->(...)
Clipper compatible modifications. I do not like it but current
previous behavior made problems for people who have code like:
if ("NOT_EXISTING_ALIAS")->(used())
...
else
? "Table not open..."
endif
! fixed some other RT errors to be Clipper compatible
* source/compiler/gencli.c
! .NET IL implementation for HB_P_POPLOCALNEAR and HB_P_PUSHLOCALNEAR
Notice: These opcodes are responsable for loading the values on the locals and
also for pushing the locals contents onto the virtual machine stack.
You can already run tests like this:
function Main()
local c := "Hello world from Harbour.NET !"
? c
return nil
Remember the process to build a .NET app:
Harbour.exe -gi -n hello.prg --> hello.il
ilasm.exe hello.il --> hello.elude/hbcomp.h
* harbour/include/hbstack.h
* harbour/include/hbxvm.h
* harbour/source/compiler/gencc.c
* harbour/source/compiler/hblbl.c
* harbour/source/vm/classes.c
* harbour/source/vm/estack.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* added automatic destructors for FOR EACH and WITH OBJECT statement
* s_lWithObjectBase changed to lWithObjectBase hb_stack membera
* added hb_stackWithObject*() functions/macros to manipulate
WITH OBJECT offset/item
* removed setting/restoring lForEach and lWithObject in functions
preamble/postamble
! fixed restoring s_lRecoverBase on HB_QUIT_REQUESTED
! fixed possible GPF on enumerators copping
* moved FOR EACH / WITH OBJECT massages suport from HVM to classy.c
! fixed access to first stack item in hb_vmIsLocalRef()
* harbour/TODO
- removed note about hb_objGetMethod() - it's already addressed
* harbour/contrib/rdd_ads/ads1.c
! make GOTOP() when new index is open and is set as control one
* harbour/include/hbcomp.h
* harbour/include/hbstack.h
* harbour/include/hbxvm.h
* harbour/source/compiler/gencc.c
* harbour/source/compiler/hblbl.c
* harbour/source/vm/classes.c
* harbour/source/vm/estack.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* added automatic destructors for FOR EACH and WITH OBJECT statement
* s_lWithObjectBase changed to lWithObjectBase hb_stack membera
* added hb_stackWithObject*() functions/macros to manipulate
WITH OBJECT offset/item
* removed setting/restoring lForEach and lWithObject in functions
preamble/postamble
! fixed restoring s_lRecoverBase on HB_QUIT_REQUESTED
! fixed possible GPF on enumerators copping
* moved FOR EACH / WITH OBJECT massages suport from HVM to classy.c
! fixed access to first stack item in hb_vmIsLocalRef()
* harbour/TODO
- removed note about hb_objGetMethod() - it's already addressed
* source/pp/ppcore.c
* source/pp/pptable.c
* utils/hbpptest/pp_test.prg
* fixed to be more Clipper compatible
* fixed access to unallocated memory
* added more test cases
* source/pp/ppcore.c
* source/pp/pptable.c
* utils/hbpptest/pp_test.prg
* fixed to be more Clipper compatible
* fixed access to unallocated memory
* added more test cases
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/dbf1.c
* harbour/source/rdd/delim1.c
* harbour/source/rdd/sdf1.c
* harbour/source/rdd/workarea.c
* code cleanup
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
! do not interrupt subindexing when new record is concurrently added by
other station
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtstd/gtstd.c
! redirect STDOUT() to console only when stdout is a tty device.
* source/pp/ppcore.c
* fixed bugs which I introduced
* utils/hbpptest/pretest.prg
* added more test cases
+ utils/hbpptest/pp_test.prg
* new file to test preprocessor Preprocess both with Clipper
and harbour and next use diff utility to compare outputs -
ignore the number of white spaces (use diff -w -u ...)
* harbour/source/vm/hvm.c
! fixed executing EXIT procedures after external to BEGIN SEQUENCE / END
BREAK - now by default we are taking the same action as after QUIT
what seems to be intention of Clipper authors. When HVM is compiled
with HB_C52_STRICT macro then we will try to emulate real Clipper
behavior.
* harbour/include/hbapi.h
* harbour/source/vm/itemapi.c
+ added single member to hb_struPointer structure for internal HVM use.
The reference counter for GC collectible HB_IT_POINTER items which have
'single' member set to TRUE is not updated in hb_itemCopy().
* harbour/source/rdd/workarea.c
* code cleanup
* harbour/source/vm/mainwin.c
! Fixed compilation in C mode under Msvc
* harbour/include/hbapi.h
* Added HB_EXPORT to hb_symbolNew()
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/make_b32.bat
* harbour/make_vc.bat
* harbour/Common.mak
! Fixed compilation of Harbour DLL
! Fixed compilation of HbPPTest.exe
% Improved building of customized Harbour DLL
% Some more minor fixes and improvements
* harbour/doc/en/hb_vm.txt
* harbour/doc/es/hb_vm.txt
* harbour/include/hbvm.h
* harbour/contrib/hgf/gtk/mainlgtk.c
* harbour/source/compiler/gencc.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/vm/maindll.c
* harbour/source/vm/mainpm.c
* harbour/source/vm/mainstd.c
* harbour/source/vm/mainwin.c
* harbour/source/vm/hvm.c
* changed hb_vmQuit() to not execute EXIT() but return s_nErrorLevel
! execute EXIT procedures in hb_vmRequestQuit() - Clipper compatible
behavior
* do not exit immediately in RT errors but return from all executed
functions - some internal parts of RDD code will have to be fixed.
* harbour/source/vm/proc.c
! fixed procname for codeblocks. Seems that we are not fully Clipper
compatible yet. I'll look at it closer soon.
* harbour/TODO
+ added new item: Clean RDD code to be safe for return from RT errors
assigned to me
* harbour/make_tgz.sh
* added hbpptest to list of tools rebuilt with shared library
* harbour/source/rdd/dbcmd.c
! fixed possible access to uninitialized variable in __dbApp()/__dbCopy()
* harbour/source/rtl/dbedit.prg
% Optimized codeblock creation.
+ Restores 100% compatible codeblock creation for STRICT mode.
- Removed a strange extension which looked like a mistake
(besides not being CA-Cl*pper compatible).
* Comments reviewed/changed/added.
; Review done, now 100% compatible.
* harbour/common.mak
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/utils/Makefile
+ Added hbpptest
* harbour/utils/hbpptest/pretest.prg
+ Output now goes to STDOUT.
* harbour/source/compiler/harbour.c
! Possible memory leak fixed.
* harbour/source/rtl/Makefile
! Fixed tabs (readded them).
- harbour/source/rtl/dbdelim.prg
+ harbour/source/rdd/dbdelim.prg
- harbour/source/rtl/dbjoin.prg
+ harbour/source/rdd/dbjoin.prg
- harbour/source/rtl/dbsdf.prg
+ harbour/source/rdd/dbsdf.prg
* harbour/source/rtl/Makefile
* harbour/source/rdd/Makefile
* harbour/common.mak
* Moved three RDD related internal function source files
to the RDD library. (They did depend on each other
anyway.)
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/dbfuncs.prg
* harbour/source/rdd/dblist.prg
* harbour/source/rdd/dbsort.prg
* harbour/source/rdd/dbstrux.prg
* harbour/source/rdd/dbtotal.prg
* harbour/source/rdd/dbupdat.prg
* harbour/source/rdd/rddord.prg
* harbour/source/rtl/dbdelim.prg
* harbour/source/rtl/dbedit.prg
* harbour/source/rtl/dbjoin.prg
% Cleanups, minor optimizations.
! __dbApp(), __dbCopy() to return LOGICAL.
! Problem where error condition was not detected if BREAK didn't
set the error object.
! __dbTotal() lRest handling fixed.
! __dbTotal() ErrorBlock overriding removed.
! __dbCreate() now generating default alias.
% __dbCreate() using dbCreate() undoc param to open the tables.
! __dbDelim() return value.
! __dbSDF() return value.
+ CA-Cl*pper undocumented call added: _dtxCondSet()
+ XBase++ compatible calls implemented:
dbJoin(), dbList(), dbSort(), dbTotal(), dbUpdate(), _dbExport()
dbCopyStruct(), dbCopyExtStruct()
+ Added some more 10 chars call stubs:
__dbCopySt(), __dbCopyXS(), __dbOpenSD(), __dbArrang()
+ Comments.
+ Formatting.
; All high-level db functions seems to be compatible now.
DBEDIT() is left TODO for review (refix).
* harbour/source/rtl/tbrowse.prg
* Minor cleanup.
* harbour/include/hbexpra.c
* harbour/source/vm/arrayshb.c
* harbour/source/rdd/dblist.prg
- Removed compiler+RTL __dbList() hack which
made it incompatible with CA-Cl*pper. The
hack targeted an XBase++ extension, but it's
compatible even without the hack. Tested with
XBase++ 1.82.294.
* harbour/source/rtl/typefile.prg
% FUNCTION -> PROCEDURE
+ _TypeFile() XBase++ internal function added.
* harbour/ChangeLog
! fixed typo in date
* harbour/doc/gtapi.txt
* harbour/include/hbgtcore.h
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtgui/gtdef.c
* changed HB_GT_DEFAULT_<name> to HB_GT_<name>_DEFAULT and added
REQUEST posibilities so now the GT drivers can be REQUESTed and
the default one set in similar way.
F.e.:
REQUEST HB_GT_WIN
REQUEST HB_GT_WVT_DEFAULT
REQUEST HB_GT_STD
I think that it will be much easier and also using _DEFAULT as suffix
does not resolve fully 10 character symbol but will work if GT name
is not longer then 3 characters
* harbour/source/compiler/harbour.c
! fixed typo in binary or - || was used instead of |
* reenabled frame optimization for compilation without -n switch
* harbour/source/compiler/genc.c
- removed debug message I left by mistake
* harbour/bin/hb-func.sh
* use by default -gc0 output when compiled as temporary workaround
for GPF in -gc2
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
! fixed .prg file name stored in generated .c files
* harbour/source/compiler/harbour.c
! update function counter when startup function is removed
It fixes compilation of empty .prg files in C++ mode
* harbour/source/rtl/dbjoin.prg
- removed unused variable
* include/hbcomp.h
* include/hberrors.h
* include/hbexpra.c
* include/hbexprb.c
* include/hbexprc.c
* include/hbmacro.h
* include/hbpcode.h
* include/hbpp.h
* include/hbxvm.h
* source/common/expropt1.c
* source/compiler/cmdcheck.c
* source/compiler/expropta.c
* source/compiler/exproptb.c
* source/compiler/exproptc.c
* source/compiler/genc.c
* source/compiler/gencc.c
* source/compiler/gencli.c
* source/compiler/genhrb.c
* source/compiler/genjava.c
* source/compiler/genobj32.c
* source/compiler/harbour.c
* source/compiler/harbour.l
* source/compiler/harbour.y
* source/compiler/hbdead.c
* source/compiler/hbfix.c
* source/compiler/hbfunchk.c
* source/compiler/hbgenerr.c
* source/compiler/hblbl.c
* source/compiler/hbpcode.c
* source/compiler/hbstripl.c
* source/macro/macroa.c
* source/macro/macrob.c
* source/macro/macroc.c
* source/vm/hvm.c
* source/vm/macro.c
* fixed compilation of code that uses '@' pass by
reference. The following syntax is no longer supported:
var := IIF( .T., @var, var )
however you can still use the following:
funcall( IIF( bPassbyRef, @someVar, someVar ) )
+added support for the following statement:
WITH OBJECT <objexpression>
...
END
inside this statement you can use simplified form of sending
messages to the object specified by <objexpression>
:message( ) instead objexpression:message()
:property instead objexpression:property
The runtime error will be generated at the time of message
sending (or property access/assign) if <objexpression>
is not a value of type object.
You can use the reserved property:
:__withobject
to access/assign the controlling object.
*fixed support for command line response file (@file.clp)
to be compatible with Clipper (Clipper genertes a single
obj file)
*fixed memory leaks when there is a fatal error in autoopened
module (using DO ... statement)
*implicit startup functions are removed from the list of
functions before generation of output code
* source/pp/ppcomp.c
* source/pp/pplib.c
* source/pp/ppcore.c
* redefinition of #define no longer causes a memory leak
* fixed repeatable optional clauses
#xcommand SET <var1> [, <varN>] WITH <val> =>
<var1>:=<val>[; <varN>:=<val>]
* fixed compilation of optional clauses (when used in different
order then declared) -this fixes the following long
waiting bug:
#command MYCOMMAND [<mylist,...>] [MYCLAUSE <myval>] => ;
MyFunction( {<mylist>} [, <myval>] )
MYCOMMAND MYCLAUSE 321 "HELLO"
* fixed restricted macro match marker <x:&>
* tests/Makefile
- tests/pretest.prg
+ utils/hbpptest
+ utils/hbpptest/Makefile
+ utils/hbpptest/pretest.prg
* moved file 'pretest.prg' from tests to separate directory
to make easier validation of the preprocessor
* TODO
* added note to fix hb_objGetMethod() so it will not generate
error if there is no method
* doc/en/clipper.txt
* added documentation for WITH OBJECT usage
* harbour/source/rdd/dbtotal.prg
% Unused variable removed, one other optimized out, other minor optimizations.
! Fixed not resetting the error block when used on a table containing
Memo fields only.
! Fixed error when passing xFor parameter as a string.
! Set(_SET_CANCEL...) calls removed.
+ Formatting, added few comments, CA-Cl*pper differences.
* harbour/common.mak
* harbour/source/rtl/Makefile
+ harbour/source/rtl/dbjoin.prg
+ added __dbJoin() - code by Pavel Tsarenko borrowed from xHarbour
* harbour/source/rdd/dbtotal.prg
+ added __dbTransRec() and updated to use it like in Clipper
Can someone tell me why we have Set( _SET_CANCEL, .f. ) in this
function?
* harbour/source/rtl/dummy.prg
- removed __dbJoin() and __dbTransRec()
Now only one function is defined here: __dbFList()
I have no idea what it does - if someone knows then please
implement it.
* harbour/include/hbvm.h
* harbour/source/vm/hvm.c
* formatting
* harbour/source/rdd/dbcmd.c
* keep strict Clipper compatibility in DBCREATE() parameters
* harbour/source/rdd/dbsort.prg
* harbour/source/rdd/dbstrux.prg
* harbour/source/rtl/dbdelim.prg
* updated for strict Clipper DBCREATE() parameters
