harbour-core

Author	SHA1	Message	Date
Przemyslaw Czerpak	86333ba271	2008-09-18 07:21 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbthread.h * use assembler version of atomic inc/dec operation in all x86 based GCC builds - it should noticeable improve OS2 MT build speed, please test. * harbour/include/hbcomp.h * harbour/include/hbapicdp.h * harbour/include/hbcompdf.h * harbour/include/hbgtcore.h * harbour/include/hbapifs.h * harbour/include/hbwince.h * harbour/include/hbexpra.c * harbour/include/hbexprop.h * harbour/include/hbmacro.h * harbour/include/hbapigt.h * harbour/include/hbapi.h * harbour/include/hbapiitm.h * harbour/include/hbexprb.c * harbour/source/pp/ppcore.c * harbour/source/pp/hbpp.c * harbour/source/vm/macro.c * harbour/source/vm/cmdarg.c * harbour/source/vm/arrays.c * harbour/source/vm/extrap.c * harbour/source/vm/memvars.c * harbour/source/vm/eval.c * harbour/source/vm/extend.c * harbour/source/vm/set.c * harbour/source/main/harbour.c * harbour/source/common/hbfsapi.c * harbour/source/common/reserved.c * harbour/source/common/expropt1.c * harbour/source/macro/macro.yyc * harbour/source/macro/macro.y * harbour/source/macro/macro.yyh * harbour/source/macro/macrolex.c * harbour/source/rtl/gtdos/gtdos.c * harbour/source/rtl/gtwin/gtwin.c * harbour/source/rtl/gtxwc/gtxwc.c * harbour/source/rtl/gtos2/gtos2.c * harbour/source/rtl/hbgtcore.c * harbour/source/rtl/cdpapi.c * harbour/source/rtl/gtcrs/gtcrs.c * harbour/source/rtl/hbtoken.c * harbour/source/rtl/gtchrmap.c * harbour/source/rtl/gtstd/gtstd.c * harbour/source/rtl/gtsln/mousesln.c * harbour/source/rtl/gtsln/gtsln.c * harbour/source/rtl/gtsln/kbsln.c * harbour/source/rtl/gttrm/gttrm.c * harbour/source/rtl/gtpca/gtpca.c * harbour/source/rtl/hbhex.c * harbour/source/rtl/gtgui/gtgui.c * harbour/source/rtl/gt_tpl/gt_tpl.c * harbour/source/rtl/gtcgi/gtcgi.c * harbour/source/rtl/gtwvt/gtwvt.c * harbour/source/rtl/strtran.c * harbour/source/rtl/hbinet.c * harbour/source/rtl/gtapi.c * harbour/source/rtl/filesys.c * harbour/source/rdd/dbfntx/dbfntx1.c * harbour/source/rdd/dbsql.c * harbour/source/rdd/dbfcdx/dbfcdx1.c * harbour/source/rdd/dbffpt/dbffpt1.c * harbour/source/rdd/hbsix/sxfname.c * harbour/source/compiler/ppcomp.c * harbour/source/compiler/hbmain.c * harbour/source/compiler/cmdcheck.c * harbour/source/compiler/hbdbginf.c * harbour/source/compiler/genc.c * harbour/source/compiler/hbident.c * harbour/source/compiler/hbusage.c * harbour/source/compiler/gencc.c * harbour/source/compiler/harbour.yyc * harbour/source/compiler/harbour.y * harbour/contrib/gtalleg/gtalleg.c * harbour/contrib/hbct/charlist.c * harbour/contrib/hbct/charmix.c * harbour/contrib/hbct/screen1.c * harbour/contrib/hbct/atrepl.c * harbour/contrib/xhb/hboutdbg.c * harbour/contrib/xhb/hbxml.c * harbour/contrib/xhb/hbxml.h * harbour/contrib/hbgt/strexpan.c * harbour/contrib/hbsqlit3/sqlite3/sqlite3.c * harbour/contrib/gtwvg/gtwvg.c * harbour/contrib/hbclipsm/status.c * harbour/contrib/hbclipsm/gauge.c * harbour/contrib/hbmisc/stringsx.c * harbour/contrib/hbtip/utils.c * harbour/contrib/hbgf/hbgfgtk/msginfo.c * harbour/contrib/hbgf/hbgfgtk/harbgtk.h * harbour/contrib/hbbmcdx/bmdbfcdx.c * harbour/utils/hbmake/hbmgauge.c * use const char * instead of char * in places which should be marked as const	2008-09-18 05:23:49 +00:00
Przemyslaw Czerpak	26623b9f34	2008-09-15 04:33 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/pack_src.sh * added file list to archive so it's possible to recreate it later without SVN data * harbour/common.mak * harbour/make_b32.mak * harbour/make_gcc.mak + added HBVMMT library for default builds BCC version not tested - please test. * harbour/source/vm/hvm.c * moved language and code page setting before class and error initialization * harbour/source/rtl/fserror.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/fssize.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/filesys.c ! fixed overloading FS error codes by other operations, f.e. accessing TLS data by OS API function call	2008-09-15 02:34:44 +00:00
Przemyslaw Czerpak	64f97582d9	2008-09-13 18:49 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbpp.h * harbour/include/hbvm.h * harbour/include/hbcomp.h * harbour/include/hbcompdf.h * harbour/include/hbtrace.h * harbour/include/hbapilng.h * harbour/include/hbinit.h * harbour/source/rtl/langapi.c * harbour/source/pp/ppcore.c * harbour/source/pp/hbpp.c * harbour/source/vm/itemapi.c * harbour/source/vm/hvm.c * harbour/source/common/hbver.c * harbour/source/common/hbtrace.c * harbour/source/common/expropt2.c * harbour/source/compiler/complex.c * harbour/source/compiler/hbident.c * harbour/source/compiler/hbfunchk.c * changed some declarations from 'char ' to 'const char ' and fixed casting for some more pedantic compilers * harbour/source/pp/ppcore.c ! fixed one typo which could cause memory leak and even GPF * harbour/common.mak * harbour/source/vm/Makefile * harbour/source/rtl/Makefile - harbour/source/rtl/set.c + harbour/source/vm/set.c * harbour/include/hbstack.h * harbour/source/vm/estack.c * moved from RTL to HVM * eliminated hb_set global structure * moved set structure to HVM stack + added internal function hb_setClone() which is used to create copy of SET structure for child threads * hidden HB_SET_STRUCT declaration - 3-rd part code must not access it directly. Dedicated hb_set() functions should be used instead. + added new function: BOOL hb_setSetItem( HB_set_enum set_specifier, PHB_ITEM pItem ) which allow to change some set by 3-rd party code. TODO: not all SETs can be changed yet - if someone have a while then please add code for missing ones. harbour/include/set.ch * harbour/include/hbset.h + added _SET_CODEPAGE which works like _SET_LANGUAGE giving common interface * harbour/include/hbsetup.h + added HB_CODEPAGE_DEFAULT which works like HB_LANG_DEFAULT * harbour/source/vm/hvm.c ! fixed builds which uses non EN lang or code page modules by forcing linking the chosen ones * harbour/include/hbstack.h * harbour/source/vm/estack.c * harbour/include/hbapicdp.h * harbour/source/rtl/cdpapi.c - removed global code page variable: hb_cdp_page and moved code page settings to HVM stack + added new function hb_cdpID() which returns current code page character ID + added new functions hb_vmCDP() and hb_vmSetCDP() to get/set active for given thread code page structure * harbour/include/hbstack.h * harbour/source/vm/estack.c * harbour/include/hbapilng.h * harbour/source/rtl/langapi.c + moved lang setting to HVM stack + added new functions hb_vmLang() and hb_vmSetLang() to get/set active for given thread language module * harbour/include/hbvmpub.h * harbour/include/hbstack.h * harbour/include/hbapi.h * harbour/source/vm/estack.c * harbour/source/vm/dynsym.c * harbour/source/vm/itemapi.c * harbour/source/vm/memvars.c * changed memvar handles for HB_HANDLE to void * which is directly casted to PHB_ITEM - new memvar references * changed HB_DYNS declarations for MT mode. In MT mode HB_DYNS does not contain area and memvar handles which are moved to thread local HVM stack + added array for thread local memvar and area handles to HVM stack % eliminated global continues array with all memvars and detached locals % changed HB_IT_MEMVAR to use pointers to HB_ITEM directly - it resolve synchronization problems in MT mode and should also improve the speed and reduce memory usage. It should be well visible in applications which uses lot of detached locals. - removed hb_memvarsInit() and hb_memvarsFree() - they are not necessary now because we do not longer use array with all allocated memvars and detached local and private stack initialization is made automatically + added internal functions hb_dynsymGetMemvar()/hb_dynsymSetMemvar() + added hb_memvarGetValueBySym() for debugger * moved PRIVATE variable stack to HVM stack * eliminated all static variables in memvars module * harbour/include/hbstack.h * harbour/source/vm/estack.c * harbour/source/rtl/fserror.c * moved IO errors to HVM stack + added special IO error handling which works without HVM stack It allows to use hb_fs() functions without allocated stack by 3-rd party threads. harbour/source/rtl/filesys.c * moved hb_fsCurDir() to HVM stack with special handling to work with HVM stack like IO errors * harbour/source/rdd/workarea.c * allocated RDD node array in bigger peaces to reduce later RT reallocations in MT mode. If user want to add dynamically more then 64 RDDs then it should synchronize this operation himself. * harbour/source/rdd/wacore.c * moved WA list, current WA, default RDD and neteer() flag to HVM stack * harbour/include/hbdefs.h - removed HB_HANDLE declaration * harbour/include/hbapi.h - removed HB_VALUE structure - it's not longer used due to different memvar handling * updated hb_struMemvar to new memvar handling * replaced hb_vmIsLocalRef() and hb_memvarsIsMemvarRef() with hb_vmIsStackRef() which respect multiple stack and new memvar and static structures and location in GC mark pass. * harbour/include/hbstack.h * harbour/source/vm/estack.c * harbour/source/vm/hvm.c + added support for thread specific data located on HVM stack Now it's possible to allocate static variables which are local to thread. Such variables are allocated on HVM stack and automatically destroyed. To declare new TSD variable use: HB_TSD_NEW( <name>, <size>, <init>, <destruct> ) <name> - name of variable which holds TSD handler <size> - size of TSD are which has to be allocated <init> - init function, executed when new TSD is allocated by thread (thread access given TSD 1-st time). This function receives void * pointer to allocated area. <destruct> - destructor function executed when HVM stack is destroyed f.e.: static HB_TSD_NEW( s_scrData, sizeof( HB_SCRDATA ), NULL, hb_xSaveRestRelease ); To initialize dynamically allocated TSD variable use: HB_TSD_INIT( <name>, <size>, <init>, <destruct> ) Pointer to TSD can be accessed using hb_stackGetTSD( &<name> ) where <name> is name of variable which holds TSD handler, f.e.: PHB_SCRDATA pScrData = ( PHB_SCRDATA ) hb_stackGetTSD( &s_scrData ); See source/rtl/xsavescr.c as an example It's also possible to test if data has been already allocated for current thread by: hb_stackTestTSD( &<name> ) => pData it works like hb_stackGetTSD() but return NULL if current thread data has not been allocated yet. * harbour/include/hbstack.h * harbour/source/vm/estack.c * changed hb_stack location to thread local storage in MT mode + added functions and macros to access/assign new HVM stack members + changed garbage collection mark functions to work with multiple stacks, thread local static and memvar variables * harbour/source/rtl/xsavescr.c * use TSD data for screen buffer to make __XSAVESCREEN()/__XRESTSCREEN() thread independent * harbour/source/rtl/idle.c * use TSD data for idle task settings and codeblocks - removed hb_idleShutDown() - it's not longer necessary * harbour/source/rtl/setkey.c * use TSD data for allocated keys to make SETKEY() thread independent * harbour/source/rtl/math.c * moved math error handler, math error block, math error mode and math error structure to TSD * harbour/source/rtl/errorapi.c * moved error handler, error block, error launch counter and DOS error value to TSD * harbour/source/rtl/inkey.c * moved inkey "before" and "after" blocks to TSD * harbour/source/rdd/hsx/hsx.c * moved HSX handles array to TSD * harbour/include/hbapigt.h * harbour/source/rtl/console.c - removed hb_setkeyInit() and hb_setkeyExit() - they are not longer necessary, allocated resources will be freed by TSD destructor function * harbour/include/hbapi.h * harbour/source/rtl/console.c * removed hb_conXSaveRestRelease() - it's not longer necessary, allocated resources will be freed by TSD destructor function * harbour/source/vm/macro.c * moved s_macroFlags to TSD * harbour/source/rtl/accept.c * moved accept buffer to TSD * harbour/include/hbcomp.h * harbour/include/hbcompdf.h * harbour/include/hbxvm.h * harbour/source/compiler/hbmain.c * harbour/source/compiler/hbfix.c * harbour/source/compiler/hbpcode.c * harbour/source/compiler/hbdead.c * harbour/source/compiler/complex.c * harbour/source/compiler/genc.c * harbour/source/compiler/gencc.c * harbour/source/compiler/hbopt.c * harbour/source/compiler/hblbl.c * harbour/source/compiler/hbstripl.c * harbour/source/compiler/harbour.y * harbour/source/compiler/harbour.yyc * harbour/source/compiler/harbour.yyh * harbour/source/vm/hvm.c + added new PCODE HB_P_THREADSTATICS + added support for static variables which are local to thread: THREAD STATIC <varname [:= <exp>], ...> They work like normal static variables but each thread operates on its own copy. * added protection against possible double call to hb_xfree() It can happen due to wrong marking expressions as used by bison and executing destructors after our free code when syntax error appear. * harbour/source/rtl/perfuncs.prg * harbour/source/rtl/menuto.prg * harbour/source/rtl/getlist.prg * harbour/source/rtl/readvar.prg * harbour/source/rtl/text.prg * use THREAD STATIC variables to make above code MT safe * harbour/include/hbgtcore.h * harbour/source/rtl/hbgtcore.c + added hb_gt_BaseFree() which will release current GT pointer locked by hb_gt_Base() function. This function will be used to optional automatic GT access synchronization when threads share the same GT. * harbour/source/rtl/gtapi.c * harbour/source/rtl/inkeyapi.c * harbour/source/rtl/mouseapi.c * harbour/contrib/hbct/ctwin.c * free GT pointer by hb_gt_BaseFree() TODO: CTWIN is not MT safe yet - it will be updated together with core GT when we add multi window interface for thread with own console window. * harbour/bin/hb-func.sh * harbour/config/linux/gcc.cf + added rt lib to Linux builds * harbour/bin/postinst.sh * create MT safe version of FM stat library: fmmt * harbour/bin/pack_src.sh + added support for ZIP packing * harbour/include/hbapi.h * harbour/include/hbvm.h * harbour/source/vm/hvm.c + added hb_vmThreadInit()/hb_vmThreadQuit() functions - they initialize HVM for calling thread so it can execute .prg code and call HVM functions. They can be used by 3-rd party code threads. + added hb_vmUnlock()/hb_vmLock() functions which informs that thread will not operate on HVM structures for some time allowing to execute single thread only processes like GC. + added hb_vmThreadQuitRequest() which sends stop request to given thread + added hb_vmWaitForThreads() which stops main thread execution waiting for other threads + added hb_vmSuspendThreads() and hb_vmResumeThreads() used be GC to stop all HVM threads before mark/swap scan + added linked list of HVM stacks + added hb_vmTerminateThreads() used by main HVM thread in QUIT state * moved EXIT procedures execution from QUIT request to HVM QUIT state in MT mode. It may effects some non structural code which tries to access private variables in EXIT functions but it's much cleaner and understandable for user. Please remember that we guaranties that ALWAYS code in BEGIN SEQUENCE is _always_ executed even after HVM QUIT request just like destructs. Personally I think that we should move EXIT procedures execution also in ST mode. * changed startup and cleanup code for new internal structures * changes startup and cleanup code for MT mode % removed some redundant HB_ITEM type settings ! eliminated non MT safe code which was using reference counters without protection * harbour/common.mak * harbour/source/vm/Makefile + harbour/include/hbthread.h + harbour/source/vm/thread.c + added C level functions to manage threads and synchronization objects See hbthread.h for detail description. They are based on PTHREAD API and PTHREAD documentation can be used as reference. I intentionally keep this list small for easier multiplatform porting. Now they have been implemented for PTHREADS (POSIX threads supported by many different OSes), MS-Win32/64 and OS2. The OS2 version is not tested at all. I do not even know if it can be compiled so please make tests. I used Internet resources and some part of xHarbour code as documentation for OS2 MT API. It should be quite easy to add other platforms if necessary. Harbour core code needs non recursive mutexes, conditional variables and TLS for one pointer. If platforms does not support conditional variables (f.e. MS-Win or OS2) then they can be emulated using multistate semaphores. + added .prg functions to manage threads and synchronization objects: hb_threadStart( <@sStart()> \| <bStart> [, <params,...> ] ) -> <pThID> hb_threadJoin( <pThID> [, @<xRetCode> ] ) -> <lOK> hb_threadDetach( <pThID> ) -> <lOK> hb_threadQuitRequest( <pThID> ) -> <lOK> hb_threadWaitForAll() -> NIL hb_mutexCreate() -> <pMtx> hb_mutexLock( <pMtx> [, <nTimeOut> ] ) -> <lLocked> hb_mutexUnlock( <pMtx> ) -> <lOK> hb_mutexNotify( <pMtx> [, <xVal>] ) -> NIL hb_mutexNotifyAll( <pMtx> [, <xVal>] ) -> NIL hb_mutexSubscribe( <pMtx>, [ <nTimeOut> ] [, @<xSubscribed> ] ) -> <lSubscribed> hb_mutexSubscribeNow( <pMtx>, [ <nTimeOut> ] [, @<xSubscribed> ] ) -> <lSubscribed> The function list should give similar to xHarbour API but they are not exactly the same and except of hb_mutex() functions which should replicate xHarbour behavior. + harbour/source/vm/vmmt + harbour/source/vm/vmmt/Makefile + added hbvmmt library to GNU make builds. Non GNU make builds should be updated. harbour/contrib/hbct/pos1.c * harbour/contrib/gtwvg/gtwvg.c * harbour/contrib/rddads/ads1.c * harbour/contrib/hbmisc/spd.c * harbour/contrib/hbbmcdx/bmdbfcdx.c * harbour/contrib/examples/rdddbt/dbfdbt1.c * harbour/source/vm/runner.c * harbour/source/vm/itemapi.c * harbour/source/vm/hvm.c * harbour/source/rtl/console.c * harbour/source/rtl/strcase.c * harbour/source/rtl/spfiles.c * harbour/source/rtl/defpath.c * harbour/source/rtl/hbgtcore.c * harbour/source/rtl/dateshb.c * harbour/source/rtl/mlcfunc.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/is.c * harbour/source/rtl/setcolor.c * harbour/source/rtl/errorint.c * harbour/source/rtl/transfrm.c * harbour/source/rtl/dates.c * harbour/source/rtl/filesys.c * harbour/source/rtl/gtdos/gtdos.c * harbour/source/rtl/gtwin/gtwin.c * harbour/source/rtl/gtwvt/gtwvt.c * harbour/source/rtl/gtxwc/gtxwc.c * harbour/source/rtl/gttrm/gttrm.c * harbour/source/rtl/gtpca/gtpca.c * harbour/source/rtl/gtcgi/gtcgi.c * harbour/source/rtl/gtcrs/gtcrs.c * harbour/source/rtl/gtstd/gtstd.c * harbour/source/rtl/gtsln/gtsln.c * harbour/source/rtl/gtsln/gtsln.h * harbour/source/rdd/dbf1.c * harbour/source/rdd/sdf1.c * harbour/source/rdd/delim1.c * harbour/source/rdd/dbcmd.c * harbour/source/rdd/hbdbsort.c * harbour/source/rdd/workarea.c * harbour/source/rdd/dbffpt/dbffpt1.c * harbour/source/rdd/dbfcdx/dbfcdx1.c * harbour/source/rdd/dbfntx/dbfntx1.c * harbour/source/rdd/hsx/hsx.c * harbour/source/rdd/hbsix/sxfname.c * use API functions instead of direct accessing to hb_cdp_page or hb_set * harbour/source/rtl/fstemp.c * harbour/source/rtl/fssize.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/filesys.c * encapsulate potentially slow IO operation inside hb_vmUnlock()/hb_vmLock() calls to allow other thread GC activation * harbour/contrib/hbnf/fttext.c ! fixed casting * harbour/contrib/gtwvg/gtwvg.h - removed #include <comctl32.h> - my MinGW and MinGW/CE instalations do not have them. If it exists in some newer ones then it has to be covered by #if version checking. * harbour/source/vm/dynsym.c - removed hb_dynsymLog() and hb_dynsymMemvarHandle() * modified code to be MT safe and improved speed of some operations * added MUEXT protection for global dynamic table access * harbour/include/hbapi.h * harbour/source/vm/garbage.c * changed to work with MT HVM * changed to work with new memvar structures and thread local static and memvar variables * added MUEXT protection for linked block lists + added parameter to hb_gcCollectAll() which will force GC activation in MT mode by temporary suspending all executed threads. + added logical parameter to HB_GCALL() functions which is passed to hb_gcCollectAll() * harbour/source/vm/fm.c * added MUEXT protection for FM statistic module * added MT protection for reference counters. For platforms which supports atomic incrmenetation/decrementation (f.e. Interlocked() functions in MS-Win) such operations are used. For other it's MUTEX protection. It gives MT safe readonly access for HVM complex variables without user synchronization. The MUTEX protection can cause some speed overhead so it's good to define MT safe version of HB_ATOM_INC()/HB_ATOM_DEC() in hbthread.h if given platform has them. Now they are defined only for Windows. For other platforms We can define can define them in assembler for some most popular CPUs in the future. harbour/source/vm/classes.c * changed class definition array. Now it keeps pointers to class structures. * In MT mode allocated at HVM startup big enough array for class definitions to avoid later RT reallocations. It effectively eliminates MUTEX synchronization for class structure access. * protect by MUTEX code for new class creation * harbour/source/debug/dbgentry.c * eliminated hbvmopt.h and direct accessing to HVM structures * harbour/source/rtl/gtclip.c * protect with MUTEX access to internal clipboard data * harbour/source/rdd/nulsys/nulsys.c + added hb_rddCloseAll() + harbour/tests/mt + harbour/tests/mt/mttest01.prg + harbour/tests/mt/mttest02.prg + harbour/tests/mt/mttest03.prg + harbour/tests/mt/mttest04.prg + harbour/tests/mt/mttest05.prg + harbour/tests/mt/mttest06.prg + harbour/tests/mt/mttest07.prg + added some demonstration/test small MT programs written using Harbour language. Some of them can be also compiled by xHarbour but xHarbour does not pass any of my tests in real multi-CPU machine so do not expect they will work correctly. Harbour threads needs OS threads support. Each Harbour thread is directly mapped to OS thread. It's not very efficient on some older system where cost of thread creation and/or task switching is very expensive but it should not be bigger problem for modern OS-es which can support threads in practice nearly in user space only. I haven't touched Harbour function calling convention which comes from Clipper. It means that we do not pass pointer to VM to each functions like CLIP or xBase++. To resolve the problem I have to use thread local storage (TLS) where such pointer is kept. If platform does not support TLS then it can be emulated by us. Anyhow the speed of accessing TLS data and extracting HB_STACK poitner is critical for performance. Some compilers depending on used hardware and OS give native support for TLS (f.e. __thread keyword in GCC/BCC or __declspec( thread ) in MSVC). This should give optimal performance. On other Harbour uses TLS functions like TlsGetValue() (MS-WIN) or pthread_getspecific() (PTHREAD) are used. OS2 gives quite interesting TLS functionality which seems to be quite fast though it will be interesting to know how it is iplemented internally for real multi CPU machines (if it depends on CPU exception then the performance will be bad). We need TLS only for one pointer to HB_STACK structure. I haven't added any tricks like HB_THREAD_STUB in xHarbour to reduce the cost of TLS access. If it will be necessary for some platform the we can add it. Except TLS Harbour threads needs OS support for non recursive mutexes or critical sections and conditional variables. If platforms does not support conditional variables (f.e. MS-Win or OS2) then they can be emulated using multistate semaphores. I intentionally didn't create code which may need recursive mutexes. The non recursive ones are often faster and some platforms may not support recursive mutexes so they will have to be emulated by us. Harbour uses reference counters for complex variables. It means that even readonly access to complex item causes internal write operations necessary to increment/decrement its reference counter. To make such readonly access MT safe we have to make incrementation and decrementation with result checking atomic. By default it's done by mutex inside vm/fm.c but some platforms have native support for atomic inc/dec operations, f.e. Interlocked() functions in MS-Win. If they are available then such functions should be used to not reduce the performance by mutex call very often used functions. For many CPUs it should be quite easy to implement such atomic inc/dec functionality in assembler. F.e. for GCC and x86@32 it may looks like: static __inline__ void hb_atomic_inc32( volatile int p ) { __asm__ __volatile__( "lock incl %0" :"=m" (p) :"m" (p) ); } static __inline__ int hb_atomic_dec32( volatile int * p ) { unsigned char c; __asm__ __volatile__( "lock decl %0" "sete %1" :"=m" (p), "=qm" (c) :"m" (p) : "memory" ); return c == 0; } and then it's enough to define in hbthreads.h: #define HB_ATOM_INC( p ) hb_atomic_inc32( ( volatile int * ) p ) #define HB_ATOM_DEC( p ) hb_atomic_dec32( ( volatile int * ) p ) Probably I'll make it for some most popular CPUs in the future. In Harbour each thread which wants to call HVM functions have to allocate it's own HVM stack. It's done hb_vmThreadInit(). The HVM stack is freed by calling hb_vmThreadQuit(). This functions can be called also by 3-rd party threads if they want to call HVM functions or execute .prg code. Calling HVM functions without allocated stack will cause GPF. I moved most of static variables to HVM stack to make them thread local. But some of them like FS errors have their own alternative copy which is used when thread does not allocate HVM stack. It allows to use hb_fs() functions without HVM stack but programmer have to know that error codes return by hb_fsError() functions can be overwritten by other threads which also didn't allocated HVM stack. To execute garbage collector scan and mark pass it's necessary to stop other HVM threads. Otherwise the scan may give false results. It's also possible to not stop threads but protect with mutex all operations on GC items but it will probably cause performance reduction and will force some other modifications. Maybe I'll implement it in the future. I didn't use any OS level thread KILL or CANCEL calls. All HVM threads have to be cleanly removed without any resource leaks. QUIT command terminate only calling thread. If main (startup) HVM thread call QUIT then it sends QUIT request to all existing threads. In QUIT state ALWAYS statements and destructors are executed. New thread is created by: hb_threadStart( <@sStart()> \| <bStart> [, <params,...> ] ) -> <pThID> The returned value is a pointer to internal thread structure which can be used in JOIN or DETACH operations. Each thread should be Joined or DETACHED to avoid resource leaks. If programmer does not store <pThID> or all instances of <pThID> are destroyed then thread is automatically detached. I do not know clear method of thread detaching in OS2. If some OS2 users knows it then plase update vm/hbthread.c. When thread terminates then all locked by this thread mutexes are released. Each thread uses its own memvars (PRIVATEs and PUBLICs) and work areas. When new thread is created then it inherits from parent thread: - code page - language - SETs - default RDD error block is initialized to default value by calling ERRORSYS() and PUBLIC variable GetList := {} is created. The following objects are initialized to default value: - error block - math error handler and math error block - macro compiler features setting (hb_setMacro()) or move them to SETs. We can think about inheriting them. It's also possible to add inheriting of all visible memvars but I do not know it's good idea. Compilation and linking: For MT mode HVM library should be compiled with HB_MT_VM macro. GNU make automatically creates hbvmmt library which should be linked with Harbour MT programs instead of hbvm. Non GNU make files should be updated. If given compiler support TLS then you can try to set HB_USE_TLS to force using native compiler TLS support. Now it's enabled by default only for BCC. For Linux and GCC builds it may depend also on used GLIBC version. In older system there is no TLS support at all or TLS works only for shared binaries so I haven't enabled it. If you will test some other compiler then please add default native TLS support for them in hbthread.h Users using hb* scripts can simply use -mt switch when they want to create MT program, f.e.: hbmk -n -w3 -es2 -mt mttest01.prg There are still some minor things which should be done but I'll do them later. Current state seems to be fully functional. The most important and still missing is our own file lock server for RDD synchronization in POSIX systems. Kernel internally recognize POSIX locks by PID and file i-node - not PID and file handle. It means that the same file open more then once by one process shares locks. Because POSIX locks can be overwritten then we do not have any synchronization between aliased workareas or threads using the same table in *nixes. We have to make synchronization ourselves. I'll create such lock server ASAP. Please test and enjoy using Harbour threads.	2008-09-13 16:53:45 +00:00
Viktor Szakats	3f1adf0012	2008-09-06 11:07 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * make_vc.bat * contrib/mtpl_vc.bat + Added -nologo to nmake.exe command line. * source/vm/memvars.c * source/rtl/scroll.c * source/rtl/diskspac.c * source/rtl/console.c * source/rtl/philes.c * source/rtl/oldclear.c * source/rtl/oldbox.c * source/rtl/cdpapi.c * source/rtl/setpos.c * source/rtl/errorapi.c * source/rtl/setcolor.c * source/rtl/philes53.c * source/rtl/setkey.c * source/rtl/disksphb.c * source/rtl/shadow.c * source/rtl/hbhex.c * source/rtl/setcurs.c * source/rtl/dates.c * source/rtl/gtwvt/gtwvt.c * source/rtl/hbinet.c * source/rtl/hbffind.c * source/rtl/filesys.c * contrib/hbct/screen2.c * contrib/hbct/screen1.c * contrib/hbnf/fttext.c ! Fixed more MSVS 2008 -W4 warnings (about 100 of them). * contrib/hbnf/fttext.c ! Fixed C++ compile error after recently switching to Harbour API from Clipper one.	2008-09-06 09:11:45 +00:00
Viktor Szakats	e433d7ff4b	2008-08-27 02:47 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * source/rtl/filesys.c ! Disabled hb_fsPOpen() body for __CYGWIN__. This way __CYGWIN__ compiles cleanly. (although I'm not sure how important Cygwin support is)	2008-08-27 00:48:03 +00:00
Viktor Szakats	fae2a5f489	2008-08-26 02:43 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * contrib/xhb/hbcrypt.c * contrib/hbw32/tprinter.c * contrib/hbw32/w32_ole.c * contrib/hbw32/w32_prn.c * contrib/hbfbird/tests/testapi.c * contrib/hbziparch/hbziparc.c * contrib/hbziparch/hbzipnew.cpp * contrib/hbhpdf/harupdf.c * contrib/hbfimage/fi_winfu.c * contrib/hbfimage/fi_wrp.c * contrib/hbgf/hbgfw32/win32.c * contrib/hbgf/hbgfos2/os2pm.c * source/rtl/filesys.c * utils/hbtest/rt_miscc.c * // -> ANSI comments. ; NOTE: hbwhat32 and gtwvg remain with //.	2008-08-26 00:45:47 +00:00
Viktor Szakats	4c4120985a	2008-08-21 10:28 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * include/dbinfo.ch * include/dbstruct.ch * include/hbgtinfo.ch * include/hblang.ch * include/setcurs.ch ! Added "also used from C code" comments. * utils/hbmake/ffile1.prg ! Minor cleanup. * include/hbgfxdef.ch * include/hbgtinfo.ch * Marked old GTI_, GFX_ macros with HB_LEGACY_LEVEL. (Old macro HB_GT_NO_XHB no longer works) * include/hbsetup.ch + Added HB_LEGACY_LEVEL macro. Currently turned on. Will be turned off later, and completely removed as a final step. Times are not defined for these yet. Please prepare to modify your code to not use old legacy stuff. NOTE: C code using legacy Clipper (.api) headers are unaffected. * include/hbapirdd.h * Marked HARBOUR_* macros with HB_LEGACY_LEVEL * include/hbsetup.h * Marked OS_UNIX_COMPATIBLE, OS_PATH_DELIMITER macros with HB_LEGACY_LEVEL. * include/hbapifs.h * source/rtl/filesys.c * Marked hb_fileNameConv() as HB_LEGACY_LEVEL. ; 3rd party and app developers should switch to hb_fsNameConv(). * source/rtl/box.c * source/rtl/console.c * source/rtl/filesys.c * source/rtl/gtapi.c * source/rtl/hbgtcore.c * contrib/hbclipsm/gauge.c * contrib/hbclipsm/status.c * contrib/hbct/ctwin.c * source/rtl/set.c * utils/hbmake/hbmlang.c * Updated core/contrib sources to use non-legacy names: HB_CLRSTR_LEN, HB_EVALINFO, PHB_EVALINFO, HB_FHANDLE ; TODO: FHANDLE -> HB_FHANDLE is incomplete yet. * include/hbdefs.h * Minor formatting. * include/hbmath.h ! #include <hbmath.ch> -> #include "hbmath.ch" * contrib/hbmysql/mysql.c + function SQLFETCHR() updated to allow fetching binary (BLOB) fields. [Thanks to Mitja Podgornik] * include/hbapifs.h * include/hbapigt.h * include/hbapiitm.h * include/hbdefs.h * include/item.api * include/filesys.api * include/gt.api * FHANDLE -> HB_FHANDLE * EVALINFO -> HB_EVALINFO * PEVALINFO -> PHB_EVALINFO * EVALINFO_PTR -> marked as legacy * CLR_STRLEN -> HB_CLRSTR_LEN ; Old names are still working if HB_LEGACY_LEVEL is #defined, and by default now it is. ; It's highly recommended to change all 3rd party and app C code to use the new #defines/types/functions. ; NOTE1: There are some more names which are still in the legacy "namespace", and gradually I'd like to clean some of these as well. The most important would be the type names, as these are currently colliding with multiple external packages, like windows.h, and it also makes it impossible to compile hbfimage on certain systems. ; NOTE2: I'd also like to move the _PTR (like HB_ITEM_PTR) names to legacy status as we don't really use them except in a few VM files, and we have PHB_ as a wide-spread (and shorter) replacement. ; NOTE3: We may also use HB_LEGACY_LEVEL to obolete other legacy or unsafe functions, with better new alternatives. ; NOTE4: Here's a more or less complete list of names that _may_ cause such problems: ; Type related stuff - TRUE, FALSE - BOOL, BYTE, SCHAR, UINT, USHORT - INT_MAX, INT_MIN - INT16, INT16_MAX, INT16_MIN - INT24_MAX, INT24_MIN - INT32, INT32_MAX, INT32_MIN - INT64, INT64_MAX, INT64_MIN - LONG, LONG_MAX, LONG_MIN - LONGLONG, LONGLONG_MAX, LONGLONG_MIN - SHORT, SHRT_MAX, SHRT_MIN - UCHAR, UCHAR_MAX - UINT16, UINT16_MAX - UINT24_MAX - UINT32, UINT32_MAX - UINT64, UINT64_MAX - ULONG, ULONG_MAX - ULONGLONG, ULONGLONG_MAX - assert() ; Some hacks currently used: - HB_DONT_DEFINE_BASIC_TYPES - HB_DONT_DEFINE_BOOL - HB_OS_WIN_32_USED -> (include <windows.h> locally where needed) ; Compiler related stuff: - VS_, VU_, VT_, FUN_ - COMDECLARED, COMCLASS, COMSYMBOL - VAR, PVAR - _FUNC, PFUNCTION - _INLINE, PINLINE - _FUNCALL, PFUNCALL - _EXTERN, PEXTERN - AUTOOPEN, PAUTOOPEN - FUNCTIONS - INLINES - FUNCALLS - SYMBOLS ; Clipper compatibility #defines, better be moved behind a compatibility layer: - F_ERROR, FS_ERROR - IS() - E_, EF_ - FL_, FLX_, FO_, FXO_ - _B_* - FC_, FS_, FD_* - INKEY_, K_ - ES_, EG_ - SC_* - DBS_* ; + All RDD related stuff, including "dbinfo.ch" constants.	2008-08-21 09:12:17 +00:00
Viktor Szakats	56e978010a	2008-08-17 17:30 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * include/hbstack.h * include/hbsetup.h * include/hbapi.h * source/rtl/filesys.c * contrib/gtwvg/tests/demowvg.prg * contrib/hbct/tests/ctwtest.prg * contrib/hbgd/ChangeLog * contrib/hbodbc/sql.ch * contrib/rddads/ads.ch * contrib/rddads/ads1.c ! Some more filename casing related cleanups.	2008-08-17 15:48:25 +00:00
Viktor Szakats	3a41ed1d2b	2008-08-17 08:59 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * doc/dirstruc.txt * Updated to reflect current state. [Chen Kedem] * contrib/examples/pp/hbppcore.c * contrib/examples/pp/pp.c * contrib/hbct/disk.c * contrib/hbct/files.c * contrib/hbnf/getenvrn.c * contrib/hbw32/tprinter.c * contrib/hbziparch/hbxdirec.c * contrib/hbziparch/hbziparc.c * contrib/rddads/ads1.c * contrib/rddads/adsfunc.c * doc/en/terminal.txt * include/hb_io.h * include/hbapifs.h * include/hbapirdd.h * include/hbdefs.h * include/hbsetup.h * include/hbwince.h * source/common/hbfsapi.c * source/compiler/gencobj.c * source/compiler/hbcomp.c * source/compiler/hbusage.c * source/debug/dbgentry.c * source/main/harbour.c * source/pp/hbpp.c * source/pp/ppcore.c * source/rdd/dbcmd.c * source/rdd/dbf1.c * source/rdd/delim1.c * source/rdd/sdf1.c * source/rdd/usrrdd/usrrdd.c * source/rdd/wacore.c * source/rdd/wafunc.c * source/rdd/workarea.c * source/rtl/console.c * source/rtl/copyfile.c * source/rtl/defpath.c * source/rtl/direct.c * source/rtl/disksphb.c * source/rtl/file.c * source/rtl/filesys.c * source/rtl/fssize.c * source/rtl/fstemp.c * source/rtl/gtos2/gtos2.c * source/rtl/gtpca/gtpca.c * source/rtl/gtstd/gtstd.c * source/rtl/gttrm/gttrm.c * source/rtl/hbffind.c * source/rtl/hbinet.c * source/rtl/memofile.c * source/rtl/philes.c * source/rtl/seconds.c * source/rtl/set.c * source/vm/hvm.c * source/vm/main.c * Changed some macros to be in the HB_ namespace, to be possibly shorter, more unified and clearer. OS_UNIX_COMPATIBLE -> HB_OS_UNIX_COMPATIBLE OS_PATH_LIST_SEPARATOR -> HB_OS_PATH_LIST_SEP_CHR OS_PATH_DELIMITER -> HB_OS_PATH_DELIM_CHR OS_PATH_DELIMITER_STRING -> HB_OS_PATH_DELIM_STR OS_PATH_DELIMITER_LIST -> HB_OS_PATH_DELIM_LIST OS_FILE_MASK -> HB_OS_ALLFILE_MASK OS_DRIVE_DELIMITER -> HB_OS_DRIVE_DELIM_CHR OS_HAS_DRIVE_LETTER -> HB_OS_HAS_DRIVE_LETTER OS_OPT_DELIMITER_LIST -> HB_OS_OPT_DELIM_LIST OS_EOL_LEN -> HB_OS_EOL_LEN HARBOUR_GCC_OS2 -> HB_OS_OS2_GCC HARBOUR_START_PROCEDURE -> HB_START_PROCEDURE HARBOUR_MAIN_STD -> HB_MAIN_STD HARBOUR_MAIN_WIN -> HB_MAIN_WIN HARBOUR_MAX_RDD_DRIVERNAME_LENGTH -> HB_RDD_MAX_DRIVERNAME_LEN HARBOUR_MAX_RDD_ALIAS_LENGTH -> HB_RDD_MAX_ALIAS_LEN HARBOUR_MAX_RDD_AREA_NUM -> HB_RDD_MAX_AREA_NUM ; INCOMPATIBLE change, please update your sources, a simple case-sensitive search and replace on .c/.cpp/.h/.hpp files will be enough for most sources.	2008-08-17 07:39:25 +00:00
Viktor Szakats	dc44a8e991	2008-08-04 22:16 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * source/rtl/filesys.c * Minor formatting. [ Thanks for the patches, they got merged with prev commit. ]	2008-08-04 20:20:17 +00:00
Przemyslaw Czerpak	4e00128f64	2008-08-04 22:13 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/contrib/rddads/adsfunc.c ! fixed possibly unclosed AdsCloseSQLStatement() * harbour/contrib/rddads/ads1.c * minor cleanup and protection against possible strange results caused by indexes without tags * harbour/source/rtl/hbinet.c ! added protection against using wrong handles ! fixed possible resource leak (unclosed handle) when open handle is passed to HB_INETCONNECT[IP]() * harbour/source/rtl/filesys.c * cleaned warnings	2008-08-04 20:14:55 +00:00
Przemyslaw Czerpak	ae38cda440	2008-08-04 13:27 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/console.c * harbour/source/rtl/box.c * harbour/source/rtl/errorapi.c * harbour/source/rtl/do.c * harbour/source/rtl/filesys.c * cleaned warnings * harbour/source/vm/runner.c * respect references in parameters passed to init and startup functions	2008-08-04 11:27:57 +00:00
Przemyslaw Czerpak	43b414e9f7	2008-07-29 04:58 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/filesys.c ! fixed casting in DOS builds	2008-07-29 02:58:48 +00:00
Przemyslaw Czerpak	a7728fc38f	2008-07-28 16:22 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/filesys.c + use utime() to set file date and time in all dos builds not only in DJGPP.	2008-07-28 14:23:02 +00:00
Przemyslaw Czerpak	5472af3b11	2008-07-22 17:18 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/contrib/hbmzip/hbmzip.c ! fixed storing/setting file date, time and attributes in nixes harbour/include/hbapifs.h * harbour/source/rtl/hbffind.c * harbour/source/rtl/filesys.c ! replaced hack with direct bit conversion in *nixes attributes by bit testing	2008-07-22 15:19:06 +00:00
Przemyslaw Czerpak	fb434be153	2008-07-22 12:55 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/filesys.c * casting for DOS OpenWatcom builds and added missing header file	2008-07-22 10:55:58 +00:00
Przemyslaw Czerpak	6058ac88f0	2008-07-22 12:30 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/gtwvt/gtwvt.c * disabled SetWindowLongPtr() in 32bit MSVC WinCE builds * harbour/source/rtl/hbffind.c * minor cleanup. * harbour/source/rtl/filesys.c + implemented hb_fsGetAttr() and hb_fsGetFileTime() for DOS, MS-Win, OS2 and *nixes. Please test it on different platforms.	2008-07-22 10:30:50 +00:00
Viktor Szakats	3609cf9c0b	2008-07-22 09:50 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * include/hbapifs.h * source/rtl/filesys.c + Added skeletons for hb_fsGetAttr() and hb_fsGetFileTime() TODO: Implementation. * contrib/hbclipsm/common.mak * contrib/hbclipsm/Makefile - contrib/hbclipsm/dbf.c ! Removed duplicate implementation of DBF() from hbclipsm.lib ; TOFIX: I'm getting these new warnings under BCC55: Warning W8080 source\rtl\filesys.c 2718: '_fstat(int,_stat )' is declared but never used Warning W8080 source\rtl\filesys.c 2718: '_disable()' is declared but never used Warning W8080 source\rtl\filesys.c 2718: '_enable()' is declared but never used Warning W8080 source\rtl\fssize.c 142: '_fstat(int,_stat )' is declared but never used	2008-07-22 08:01:32 +00:00
Przemyslaw Czerpak	7162b6555f	2008-07-09 18:30 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/filesys.c ! casting	2008-07-09 16:30:45 +00:00
Przemyslaw Czerpak	d5ecd90c31	2008-07-09 18:24 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbwince.h * harbour/source/common/hbwince.c + added SetFileAttributesA() for WinCE builds * harbour/source/rtl/filesys.c * replaced UNICODE translations for SetFileAttributes() with direct call to SetFileAttributesA() * harbour/include/hbapifs.h * harbour/source/rtl/spfiles.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/direct.c * harbour/source/rtl/filesys.c * changed internal representation for file attributes from USHORT to ULONG + added support for POSIX permission attributes in .c code ; added some comments about used attribute translations which should be cleand	2008-07-09 16:25:00 +00:00
Przemyslaw Czerpak	218d714555	2008-07-09 13:57 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/contrib/hbmzip/hbmzip.c ! added missing DJGPP header files * harbour/source/rtl/filesys.c * finished hb_fsSetAttr() * harbour/source/rtl/set.c % optimized for loop	2008-07-09 11:58:01 +00:00
Przemyslaw Czerpak	130d897627	2008-07-09 11:57 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbdate.h * harbour/source/common/hbdate.c + added hb_timeStampEncode() * harbour/include/hbapifs.h * harbour/source/rtl/filesys.c + added hb_fsSetFileTime() + added POSIX file attributes with some macros to convert Harbour definitions into OS ones. + added initial version of hb_fsSetAttr() - work in progress, I should finish it in the evening. * harbour/contrib/hbmzip/hbmzip.c * added setting file attribute in DJGPP builds ! fixed some small typos in OS2 builds reported by David * harbour/source/vm/fm.c * changed hb_xrealloc() to be ANSI-C realloc() compatible	2008-07-09 09:57:33 +00:00
Przemyslaw Czerpak	e5fb6b8de5	2008-07-08 00:35 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbapifs.h * harbour/include/hbdefs.h * harbour/source/rtl/console.c * harbour/source/rtl/philes.c * harbour/source/rtl/hbgtcore.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/philes53.c * harbour/source/rtl/gtapi.c * harbour/source/rtl/filesys.c * harbour/source/rdd/dbfntx/dbfntx1.c * harbour/source/rdd/dbsql.c * harbour/source/rdd/sdf1.c * harbour/source/rdd/dbfcdx/dbfcdx1.c * harbour/source/rdd/delim1.c * harbour/contrib/hbbmcdx/bmdbfcdx.c + added HB_NHANDLE + added hb_numToHandle() macro ! fixed WIN32 HANDLE to integer number conversions in Harbour file API ! fixed F_ERROR and FS_ERROR usage * added support for optional FHANDLE mapped to pointer instead of integer number - disable by default in hbdefs.h Now Harbour can be compiled with internal pointer and integer file handles (FHANDLE)	2008-07-07 22:35:39 +00:00
Viktor Szakats	5de97668a9	2008-06-11 23:59 UTC+0200 Viktor Szakats (harbour.01 syenar hu) * contrib/hbmisc/spd.c + Added support for index & indirect arguments ANSI C99. ; Update contributed by original author: Xavi <jarabal@gmail.com>. Thanks! * Function renamed from _SPD() to C_SPRINTF(). Name tentative. * source/rtl/filesys.c ! hb_fsIsDrv() restored to generic version fo WinCE, because it's API doesn't have GetDriveTypeA().	2008-06-11 22:02:16 +00:00
Viktor Szakats	7d952c4d8e	2008-06-08 15:18 UTC+0100 Viktor Szakats (harbour.01 syenar hu) * include/hbgtinfo.ch + Added comment to compatibility #defines, to not use them, since they deprecated. [TOMERGE RC1] * HB_GTI_CB_* -> HB_GTE_* (stands for GT Event). Removed plain GTI_ versions, GTI_* range is frozen, pls don't and new codes to them and especially don't use them in core code. * include/hbgfx.ch * include/hbgfxdef.ch * contrib/gtwvg/gtwvg.c * source/rtl/gtxwc/gtxwc.c * source/rtl/gtwvt/gtwvt.c * GFX_* constants renamed to HB_GFX_. The old ones are still working but it's recommended to update to use HB_GFX_. #define HB_GT_NO_XHB to disable the compatibility #defines, if it collides with your code or you want to test after transition. ; [TOMERGE RC1] * source/rtl/dirdrive.c ! Guarded C53 undoc functions with HB_C52_UNDOC, which is enabled so it won't make a difference in default builds. ; [TOMERGE RC1] * source/rtl/filesys.c ! Fixed hb_fsIsDrv() to use GetDriveTypeA() API, to avoid some win32 system MessageBox() to be shown when certain types of drives (f.e. USB reader devices) are queried. ; Please test. ; TOFIX: hb_fsChDrv() suffers from the same problem. ; [TOMERGE RC1 - after testing] * contrib/hbcurl/hbcurl.c * contrib/rddads/adsfunc.c * contrib/rddads/ads1.c % Optimized out explicit function name strings in RTE calls. ! The above is actually a fix (I hope) for the one in hb_adsCheckLock(). Error text also made more consistent. ; [TOMERGE RC1 - after testing] * contrib/hbw32/w32_prn.c % Minor optimizations, cleanups.	2008-06-08 13:30:28 +00:00
Viktor Szakats	24ec421a42	2008-05-21 17:45 UTC+0100 Viktor Szakats (harbour.01 syenar hu) * harbour.spec + Added HU translation (cpwin). * source/rtl/gtfunc.c % Minor opt. * source/rtl/console.c * source/rtl/fserror.c * source/rtl/strmatch.c * source/rtl/padr.c * source/rtl/hbhex.c * source/rtl/at.c * source/rtl/abs.c * source/rtl/dates.c * source/rtl/padc.c * source/rtl/mod.c * source/rtl/hbrandom.c * source/rtl/filesys.c * source/rtl/padl.c * source/rtl/val.c * source/rtl/hbregex.c * source/vm/runner.c * source/vm/hashes.c * source/vm/itemapi.c * source/vm/hvm.c * source/vm/maindllp.c * source/vm/fm.c * source/vm/arrayshb.c * source/vm/classes.c * source/common/hbtrace.c * Formatting (whitespace only)	2008-05-21 15:50:34 +00:00
Viktor Szakats	53030631bf	2008-05-07 11:21 UTC+0100 Viktor Szakats (harbour.01 syenar hu) * contrib/rddads/make_b32.bat * contrib/rddads/make_vc.bat * contrib/rddads/ads.ch * contrib/rddads/rddads.h * contrib/rddads/ads1.c * contrib/rddads/adsfunc.c * contrib/rddads/adsmgmnt.c + Added ACE version autodetection. You can override with: -DADS_LIB_VERSION=700 (and similar) (ADS_REQUIRE_VERSION still accepted for compatibility) ! Fixed a few lib version related problems. ! hMgmtHandle global renamed to ads_g_hMgmtHandle. * Formatting. * contrib/rddads/rddads.h + QUESTION: added about ADS_MAX_KEY_LENGTH redefinition. Is it needed? * source/compiler/hbmain.c * Changed output device (hb_compOutStd() -> hb_compOutErr()) for following texts: "Compiling..." "No code generated" "Lines x, Functions/Procedures x" This is to replicate CA-Clpper behaviour a bit more. include/hbextern.ch * common.mak * source/rtl/Makefile * source/rtl/maxrow.c + source/rtl/scrrow.c * contrib/xhb/hbcompat.ch + Added hb_ScrMaxRow(), hb_ScrMaxCol() These will return the screen dimensions regardless of the size of an active window (when using CT windows for example). Functionality is the same as MaxRow(.T.) and MaxCol(.T.) previously. ! MaxRow()/MaxCol() extended parameters removed. + Added MaxRow(.T.)/MaxCol(.T.) conversions for xhb lib (hbcompat.ch) in both directions. ; XBase++ doesn't have any extended parameters for Max() function. Flagship has two of them, both of them doing something different. CAVO doesn't have these functions at all. contrib/xhb/hbcompat.ch ! GTI_* macros updated to HB_GTI_. source/vm/memvclip.c % Minor opt in __QQPUB(). * source/vm/extend.c * 0 -> NULL * source/vm/estack.c - QUESTION removed. * source/lang/msgbgmik.c * source/rtl/console.c * source/rtl/philes.c * source/rtl/adir.prg * source/rtl/getsys53.prg * source/rtl/getsys.prg * source/rtl/tget.prg * source/rtl/ttopbar.prg * source/rtl/pushbtn.prg * source/rtl/mod.c * source/rtl/memofile.c * source/rtl/radiobtn.prg * source/rtl/filesys.c * source/rtl/tbrowse.prg * source/vm/estack.c * source/vm/itemapi.c * source/vm/hvm.c * source/vm/cmdarg.c * source/vm/fm.c * source/vm/eval.c * source/common/hbver.c * source/common/expropt2.c * utils/hbtest/hbtest.prg * utils/hbtest/rt_misc.prg * utils/hbtest/rt_str.prg ! Comment fixes and minor formatting.	2008-05-07 10:26:41 +00:00
Przemyslaw Czerpak	6b02648ff2	2007-11-22 01:44 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/fssize.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/filesys.c * set _LARGEFILE64_SOURCE in all builds and use HB_USE_LARGEFILE64 macro (set automatically when __USE_LARGEFILE64 is defined too or HB_OS_HPUX && O_LARGEFILE) to enable large file support in 32 bit POSIX systems. It should help to enable large file support in other then Linux different 32 bit nixes. I hope it will resolve Sandro problems with HPUX. harbour/source/vm/itemapi.c * do not return DATE item value in hb_itemGetNDDec() It was old and unused xHarbour only code - now hb_itemGetNDDec() is compatible with hb_itemGetND() * harbour/source/rtl/seconds.c ! fixed typo in BSD builds BTW can someone test current SVN code with Solaris? I will not be able to make such test myself in the nearest few weeks.	2007-11-22 00:44:50 +00:00
Przemyslaw Czerpak	4ac8eb313f	2007-11-12 20:53 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/filesys.c * do not redefine LongToHandle() for __XCC__ and __POCC__ WinCE builds * harbour/utils/hbver/hbverfix.c ! fixed typos in previous commit	2007-11-12 19:53:59 +00:00
Przemyslaw Czerpak	c8bc7d5225	2007-11-12 19:22 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) + harbour/include/hbassert.h * harbour/include/hb_io.h * harbour/source/rtl/gtstd/gtstd.c * harbour/source/rtl/gtpca/gtpca.c * harbour/source/rtl/fssize.c * harbour/source/rtl/hbinet.c * harbour/source/rtl/filesys.c * harbour/source/compiler/hbfix.c * harbour/source/compiler/hbpcode.c * harbour/source/compiler/hbdead.c * harbour/source/compiler/genc.c * harbour/source/compiler/hbopt.c * harbour/source/compiler/gencc.c * harbour/source/compiler/hblbl.c * harbour/source/compiler/hbstripl.c * harbour/utils/hbver/hbverfix.c * harbour/utils/hbpp/hbppcore.c * removed dependences to unsupported by new MSVC header files most of this modifications can be enabled also for standard Win32 builds * harbour/source/common/hbwince.c * do not create dummy LocalLock() and LocalUnlock() function in MSVC WinCE builds * harbour/source/rtl/gtwin/gtwin.c + added HB_WINCE_USE_POCKET_CONSOLE macro which enable console support in WINCE builds (macro suggested by Marek Paliwoda) * harbour/source/rtl/gtwvt/gtwvt.h * harbour/source/rtl/gtwvt/gtwvt.c * changed default window and font size on WinCE to values suggested by Marek Paliwoda Marek if you have a while please make test with MSVC WinCE/PocketPC builds and current SVN code.	2007-11-12 18:22:51 +00:00
Przemyslaw Czerpak	8acd47d80c	2007-11-07 01:47 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/filesys.c * updated hb_fsTell() and hb_fsEof() to respect platform dependent API calls used in hb_fsSeek[Large]()	2007-11-07 00:47:52 +00:00
Przemyslaw Czerpak	07c9e15d8d	2007-11-06 12:58 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbwince.h * put functions declarations inside HB_EXTERN_BEGIN / HB_EXTERN_END + harbour/include/hbwmain.c + added WinMain() to main() wrapper * harbour/include/hbexprb.c * harbour/source/common/expropt1.c ! fixed typo reported by Chen * harbour/source/pp/hbppgen.c * harbour/source/main/harbour.c * harbour/utils/hbpp/hbpp.c * use hbwmain.c when main() is not supported by C compiler/platform * harbour/source/rtl/gtwin/gtwin.c * include wincon.h in all builds except LCC * harbour/source/rtl/fserror.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/filesys.c * use HB_OS_WIN_32_USED as in other files (still on TOFIX list) * harbour/source/rtl/seconds.c + added HB_OS_WIN_32_USED * harbour/source/compiler/hbcomp.c ! fixed typo: stderr was used instead of stdout	2007-11-06 11:59:02 +00:00
Przemyslaw Czerpak	7bad05f1b6	2007-11-04 02:34 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbapi.h * harbour/source/common/hbstr.c + added hb_strlow() * harbour/source/rtl/fstemp.c * harbour/source/rtl/filesys.c ! fixed _SET_DIRSEPARATOR behavior - now it's always set to default OS directory separator what means no translations. If you want to enable some translations then it should be set to other value, f.e. in nixes: set( _SET_DIRSEPARATOR, "\" ) enables translations of "\" in paths to "/" harbour/source/main/harbour.c + added support for new compiler switches: - Filename casing: -fn:l (lower) -fn:u (upper) -fn- (disable - default) -fn (disable - default) - Directory casing -fd:l (lower) -fd:u (upper) -fd- (disable - default) -fd (disable - default) - Path separator: -fp:<char> -fp (default: OS defined) - Filename space trimming: -fs (enable) -fs- (disable - default) These switches works only in standalone compiler. When compiler is linked with HVM and RTL then corresponding _SET_* switches are used instead.	2007-11-04 01:34:59 +00:00
Viktor Szakats	082820305e	2007-10-26 20:46 UTC+0100 Viktor Szakats (harbour.01 syenar.hu) * contrib/win32/w32_prn.c + Using hb_retptrGC()/hb_parptrGC(). * source/rtl/filesys.c ! DosToWinHandle() made static. ; Minor formatting.	2007-10-26 18:46:27 +00:00
Przemyslaw Czerpak	c99ac3d297	2007-10-18 23:54 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/hb-mkslib.sh * harbour/bin/pack_src.sh * updated for recent Viktor's modifications * harbour/source/rtl/oemansix.c ! added missing #include "hbpai.h" * harbour/include/Makefile + harbour/include/hbwince.h * harbour/include/hbrdddbf.h * harbour/include/hbrdddbt.h * harbour/include/hbdefs.h * harbour/include/hbsetup.h * harbour/include/hbrddcdx.h * harbour/include/hbrddfpt.h * harbour/contrib/xhb/hboutdbg.c * harbour/contrib/xhb/hbsyslog.c * harbour/contrib/xhb/xhbfunc.c * harbour/contrib/libct/ctnet.c * harbour/contrib/libct/files.c * harbour/contrib/libct/disk.c * harbour/contrib/libnf/getenvrn.c * harbour/contrib/win32/tprinter.c * harbour/contrib/win32/w32_ole.c * harbour/contrib/win32/w32_prn.c * harbour/contrib/odbc/odbc.c * harbour/source/pp/ppgen.c * harbour/source/rtl/diskspac.c * harbour/source/rtl/gtclip.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/gtchrmap.c * harbour/source/rtl/oemansi.c * harbour/source/rtl/disksphb.c * harbour/source/rtl/fssize.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/filesys.c * harbour/source/rtl/net.c * harbour/source/rtl/gtgui/gtdef.c * harbour/source/rtl/gtwvt/gtwvt.c * harbour/source/rtl/gtpca/gtpca.c * harbour/source/rtl/gtstd/gtstd.c * harbour/source/rtl/gtwin/gtwin.c * harbour/source/vm/Makefile * harbour/source/vm/mainwin.c * harbour/source/vm/dynlibhb.c + harbour/source/vm/mainwin/Makefile * harbour/source/common/Makefile * harbour/source/common/hbgete.c * harbour/source/common/hbver.c + harbour/source/common/hbwince.c * harbour/utils/hbpp/hbpp.c * harbour/utils/hbdot/hbdot.prg * harbour/utils/hbver/hbverfix.c + added support for WinCE and PocketPC + harbour/make_xcemgw.sh + harbour/config/w32/cemgw.cf * harbour/bin/hb-mkslib.sh * harbour/bin/hb-func.sh * harbour/bin/postinst.sh + added support for CeGCC-MinGW32 port - those of you who want to create applications for WinCE on PockePC with ARM processors on Linux or MS-Windows can download from SF cegcc-mingw32ce port. User using RPM based Linux distribution for x86 CPUs can simply download cegcc-mingw32ce-0.50-1.i586.rpm and install it. The hb* scripts created by ./make_xcemgw.sh [tgz\|gnu] are automatically updated to work with CeGCC-MinGW32 so later you can simply crate WinCE-ARM binaries using them as for native port. I'm waiting for users feedback. Please remember that I'm not Windows user and even this port was created without any Pocket machine. With Marek Paliwoda help I only tested that final applications are working using PocketPC emulator.	2007-10-18 21:55:39 +00:00
Przemyslaw Czerpak	01c5248dde	2007-10-15 17:39 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbpp.h * harbour/include/hbmath.h * harbour/source/pp/ppcore.c * harbour/source/pp/ppgen.c * harbour/source/pp/Makefile * harbour/source/rtl/diskspac.c * harbour/source/rtl/fserror.c * harbour/source/rtl/gtchrmap.c * harbour/source/rtl/disksphb.c * harbour/source/rtl/gttone.c * harbour/source/rtl/gtwvt/gtwvt.c * harbour/source/rtl/fssize.c * harbour/source/rtl/hbinet.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/filesys.c * harbour/source/vm/mainwin.c * harbour/source/common/hbver.c * harbour/source/common/hbtrace.c * harbour/source/compiler/cmdcheck.c * harbour/source/compiler/ppcomp.c * harbour/utils/hbver/hbverfix.c * harbour/utils/hbpp/hbppcore.c * harbour/config/w32/pocc.cf * code cleanup: - eliminated unnecessary errno access - use WinAPI functions instead of some standard C library functions in Windows builds	2007-10-15 15:40:17 +00:00
Przemyslaw Czerpak	053e67ddeb	2007-10-06 12:45 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbsetup.h * harbour/source/rtl/hbffind.c * harbour/source/rtl/filesys.c * cleanup * harbour/source/vm/hvm.c % use extended reference for enumerator destructor - it eliminates 3 hb_itemNew() calls reducing the cost of creating FOR EACH envelope about 40%	2007-10-06 10:45:13 +00:00
Przemyslaw Czerpak	822c550662	2007-09-28 15:25 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbexpra.c + added support for HB_ENUM([@]<varname>) functions - disabled by default can be enabled by HB_USE_ENUM_FUNCTIONS macro harbour/source/rtl/gttone.c * use assembler code for tone emulation for POCC/XCC compiler only for X86 platforms * harbour/source/rtl/filesys.c * do not include <share.h> for POCC/XCC * harbour/source/compiler/gencli.c * pacify warning * harbour/config/w32/owatcom.cf * harbour/config/w32/xcc.cf * updated description in header files + harbour/config/w32/pocc.cf + added support for Pelles ISO C Compiler	2007-10-02 08:52:28 +00:00
Przemyslaw Czerpak	168680f0c6	2007-09-06 00:45 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/gttrm/gttrm.c * use for teraterm Linux controle codes * harbour/source/rtl/filesys.c * harbour/source/rtl/file.c ! fixed GPF trap which appeared after my last modifications	2007-09-05 22:45:02 +00:00
Przemyslaw Czerpak	2428951d68	2007-09-05 16:50 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/hbgtmk.sh * replaced CVS checkout commands by SVN checkout # This script checks you have all tools to build Harbour binaries # installed then takes current Harbour sources from SourceForge SVN # repository and build binary RPMs at your local host If possible I think it will be good to put this script on Harbour home page so Linux users using RPM based distributions can simply download it and execute. It should greatly help them and it will reduce some repeated questions. * harbour/include/hbapifs.h * harbour/source/rtl/filesys.c + added hb_fsNameConv() function, hb_fileNameConv() kept only for backward compatibility - it should not be used * use hb_fsNameConv() instead of hb_fileNameConv() * updated conversion code to use hb_fsFNameSplit()/hb_fsFNameMerge() and respect some other DOS like conditions * harbour/include/hbdate.h * harbour/source/common/hbdate.c * harbour/source/rtl/seconds.c * use MT safe localtime_r() instead of localtime() in Linux + hb_dateTimeStamp(), hb_timeStampStr(), hb_timeStampDecode(), hb_dateTimeStampStr(), hb_dateTimeStampStrGet() * harbour/contrib/libct/files.c * harbour/contrib/libct/disk.c * harbour/contrib/hbzlib/hbcomprs.c * harbour/source/rtl/diskspac.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/disksphb.c * harbour/source/rtl/file.c * use hb_fsNameConv() instead of hb_fileNameConv() * harbour/source/debug/dbgentry.c + added modifications by Phil Krylow borowed from xHarbour for supporting :: in command line expressions * harbour/source/rdd/dbfntx/dbfntx1.c * harbour/source/rdd/dbfdbt/dbfdbt1.c * harbour/source/rdd/dbfcdx/dbfcdx1.c * harbour/source/rdd/delim1.c * harbour/source/rdd/dbf1.c * harbour/source/rdd/dbffpt/dbffpt1.c * harbour/source/rdd/sdf1.c * minor clenup: use hb_parptr(n) instead of hb_itemGetPtr(hb_param(n,HB_IT_POINTER))	2007-09-05 14:50:23 +00:00
Przemyslaw Czerpak	feda39d689	2007-08-30 03:55 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbapi.h * harbour/source/rtl/console.c * changed hb_conOutAlt() from static to global function. * harbour/include/hbapi.h * harbour/source/common/hbver.c + added hb_verBuildDate() * harbour/source/rtl/accept.c ! Fixed ACCEPT to respect SET CONSOLE and similar sets. * harbour/source/rtl/hbgtcore.c * harbour/contrib/libct/ctwin.c ! fixed chr(8) console output - it should erase character on the screen * harbour/include/set.ch * harbour/include/hbset.h * harbour/source/rtl/set.c * harbour/source/rtl/filesys.c + added _SET_TRIMFILENAME - when enabled low level hb_fs() functions strip trailing and leading spaces from file names to emulate DOS like behavior - switch compatible with xHarbour harbour/source/rtl/run.c * remove compiler type checking - if system() is not supported by some platform/compiler then I'd prefer to exclude it explicitly. * harbour/source/rtl/dircmd.prg + added support for extended DBF types and replaced some of Bin2W() by ASC() * harbour/source/rtl/defpath.c * use OS_HAS_DRIVE_LETTER macro to detect if platform supports drive letters * harbour/source/rtl/philes.c + added HB_FCOMMIT(), HB_OSERROR(), HB_OSDRIVESEPARATOR() Question: why we have HB_F_EOF() instead HB_FEOF() * harbour/source/rtl/oldbox.c * harbour/source/rtl/box.c ! fixed __BOX() to be Clipper compatible * harbour/source/rtl/math.c * harbour/source/rtl/dateshb.c * formatting and some minor improvements * harbour/source/rtl/isprint.c * harbour/source/vm/itemapi.c * harbour/source/rtl/ampm.c * harbour/source/rtl/inkey.c * harbour/source/rtl/gete.c * harbour/source/rtl/fkmax.c * harbour/source/rtl/langapi.c * harbour/source/rtl/colorind.c * harbour/source/rtl/mouseapi.c * harbour/source/rtl/readvar.prg * harbour/source/rtl/devoutp.prg * harbour/source/rtl/readkey.prg * code checking and formatting ! some minor fixes % some speed improvements * harbour/source/rtl/menuto.prg * harbour/source/rtl/radiogrp.prg * harbour/source/rtl/listbox.prg * harbour/source/rtl/checkbox.prg * harbour/source/rtl/pushbtn.prg * harbour/source/rtl/radiobtn.prg * code checking and formatting ! added fixes borrowed from xHarbour ! some other fixes % some speed improvements * harbour/source/rtl/filehb.c + added commment * harbour/source/rtl/transfrm.c ! fixed integer numbers transformation when _SET_FIXED is on to be Clipper compatible * harbour/source/rtl/version.c + added HB_PCODEVER() and HB_BUILDDATE() * harbour/source/rtl/copyfile.c ! fixed __COPYFILE() - source and destination files should respect _SET_DEFAULT	2007-08-30 01:56:03 +00:00
Przemyslaw Czerpak	d1f8cc8478	2007-05-04 15:35 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/contrib/Makefile * harbour/contrib/bmdbfcdx/Makefile * harbour/source/rdd/Makefile ! fixed GNU make compilation * harbour/include/hbapifs.h * harbour/source/rtl/filesys.c + added support for DOS/Windows DENY_* flag emulation in POSIX systems using BSD locks. So far such emulatin was done with standard POSIX locks. The new emulation can be enabled by setting HB_USE_BSDLOCKS and disabled by HB_USE_BSDLOCKS_OFF. By default it's enabled in Linux and BSD* based systems. Please not that it BSD locks work in differ way then POSIX ones. They are bound with file handle and process ID not i-node and PID. It will allow to synchronize even single process but it will not work in NFS and some old BSD and Linux kernels. This synchronization cannot be used also between different platforms. If someone needs such synchronization then he should build Harbour on all platforms with HB_USE_BSDLOCKS_OFF and HB_USE_SHARELOCKS with valid multi platform lock offset * harbour/source/rdd/dbcmd.c * removed all explicit NETERR setting - now it can be set only by NETERR() function (executed by default errorsys) * changed ordListAdd()/dbSetIndex() - now they return logical value with information about success * harbour/source/rdd/wafunc.c * changed hb_rddOpenTable()/hb_rddCreateTable() to make dbUseArea()/ dbCreate() more Clipper compatible - it's not exact Clipper behavior but I intentionally do not want to replicate some strange for me things, f.e. I do not know why Clipper ignores RDDNAME when it has only one character + harbour/tests/tstuse.prg + test code for dbUseArea()	2007-05-04 13:36:02 +00:00
Przemyslaw Czerpak	b86b5a8fe7	2006-12-08 05:55 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/hb-func.sh * harbour/bin/hb-mkslib.sh * harbour/bin/postinst.sh * harbour/config/bsd/gcc.cf * harbour/config/darwin/gcc.cf * harbour/config/dos/owatcom.cf * harbour/config/hpux/gcc.cf * harbour/config/linux/gcc.cf * harbour/config/linux/owatcom.cf * harbour/config/os2/gcc.cf * harbour/config/sunos/gcc.cf * harbour/config/w32/watcom.cf * harbour/contrib/rdd_ads/ads1.c * harbour/contrib/rdd_ads/adsfunc.c * harbour/include/hbapifs.h * harbour/include/hbexprc.c * harbour/include/hbsetup.h * harbour/source/common/expropt2.c * harbour/source/common/hbdate.c * harbour/source/common/hbgete.c * harbour/source/common/hbstr.c * harbour/source/common/hbver.c * harbour/source/common/hbverdsp.c * harbour/source/compiler/cmdcheck.c * harbour/source/compiler/fixflex.c * harbour/source/compiler/gencobj.c * harbour/source/compiler/genobj32.c * harbour/source/compiler/harbour.c * harbour/source/compiler/harbour.l * harbour/source/compiler/harbour.y * harbour/source/compiler/harbour.yyc * harbour/source/compiler/hbfix.c * harbour/source/compiler/hbfunchk.c * harbour/source/pp/ppcore.c * harbour/source/pp/ppgen.c * harbour/source/pp/pplib.c * harbour/source/rdd/dbcmd.c * harbour/source/rdd/workarea.c * harbour/source/rdd/dbfcdx/dbfcdx1.c * harbour/source/rdd/dbffpt/dbffpt1.c * harbour/source/rdd/hsx/hsx.c * harbour/source/rtl/accept.c * harbour/source/rtl/ampm.c * harbour/source/rtl/console.c * harbour/source/rtl/defpath.c * harbour/source/rtl/errorint.c * harbour/source/rtl/filesys.c * harbour/source/rtl/fkmax.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/hbgtcore.c * harbour/source/rtl/langapi.c * harbour/source/rtl/seconds.c * harbour/source/rtl/set.c * harbour/source/rtl/tobject.prg * harbour/source/rtl/transfrm.c * harbour/source/rtl/gtcrs/chrmap.c * harbour/source/rtl/gtcrs/gtcrs.c * harbour/source/rtl/gtcrs/gtcrs.h * harbour/source/rtl/gtpca/gtpca.c * harbour/source/rtl/gtwvt/gtwvt.c * harbour/source/rtl/gtxwc/gtxwc.c * harbour/source/vm/classes.c * harbour/source/vm/cmdarg.c * harbour/source/vm/debug.c * harbour/source/vm/estack.c * harbour/source/vm/fm.c * harbour/source/vm/hvm.c * harbour/source/vm/macro.c * harbour/source/vm/proc.c * harbour/source/vm/runner.c * harbour/utils/hbmake/hbmlang.c * harbour/utils/hbpp/hbpp.c * harbour/utils/hbpp/hbppcomp.c * harbour/utils/hbpp/hbppcore.c * harbour/utils/hbpp/hbpplib.c * harbour/utils/hbpp/pragma.c * harbour/utils/hbver/hbverfix.c * general code cleanup: all strcpy() and strcat() replaced hb strn() and hb_strn(), sprintf() by snprintf(), etc. It fixed some possible buffer overflow but it's also possible that it will exploit some some hidden so far problems but I strongly prefer to know about them ASAP to fix them before final 1.0 release. ! fixed bug I introduce in codeblock falgs which disabled early macro evaluation in codeblocks. ! added missing protection against execution by bison destructor for used CBSTART token on syntax error. % use PP stringify logik added for FLEX support to remove all redundant spaces in stringified for early macro evaluation codeblocks and add spaces between operators if after preprocessing they were removed. Now we are supporting also some code which cannot be compiled by Clipper. % cleaned and improved the speed of printer redirecting in console code. Chen please check if CG still reports problems and if not ubdate TODO/TOFIX or inform me about them. * some cleanups in building process for different nixes: MacOSX, SunOS, BSD, etc. * removed not longer necessary (I hope) compiler flag to force default 'char' type as signed. Now Harbour should work with signed and unsigned char without any problems. To other developers: please remember that when you are using 'char' as 8 bytes signed integer then it's a bug. Always explicitly use: 'signed char' in such case. On some platforms it's not possible to set default type for 'char' so if you hardcode that 'char' is signed or unsigned somewhere then code will not be portable. Chen if you will find a while to also rebuild Harbour with BCC and -K switch to make some tests with CG then I'll be thankful.	2006-12-08 05:03:58 +00:00
Przemyslaw Czerpak	24f045e4e4	2006-08-10 14:00 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbapifs.h * changed order of members in HB_FNAME structure to avoid possible problems with alignment * harbour/include/hbexprb.c ! cleaned usGroups usage to avoid BCC warnings * harbour/source/rtl/filesys.c * harbour/source/rtl/fstemp.c * code formatting and casting * harbour/include/hbset.h * harbour/source/rtl/set.c * some minor updates for future incoming hb_set structure modifications * harbour/source/vm/hvm.c * use HB_MACRO2STRING() macro for default lang setting * harbour/include/hbrdddel.h * harbour/source/rdd/delim1.c * harbour/source/rdd/dbcmd.c + extended COPY TO ... DELIMITED ... / APPEND FROM ... DELIMITED ... to support some other common formats. COPY TO ... DELIMITED WITH TAB APPEND FROM ... DELIMITED WITH TAB uses chr(9) as field separator and without string delimiters COPY TO ... DELIMITED WITH PIPE APPEND FROM ... DELIMITED WITH PIPE uses '\|' as field separator and without string delimiters COPY TO ... DELIMITED WITH ( { cStrDelim, cFldSeparator } ) APPEND FROM ... DELIMITED WITH ( { cStrDelim, cFldSeparator } ) allows users to set and any character field delimiters and fields separators	2006-08-10 12:09:14 +00:00
Jacek Kubica	3498a9c55b	* empty log message *	2006-04-13 17:10:36 +00:00
Przemyslaw Czerpak	4ee1406dd5	2006-03-21 02:25 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/make_gnu.bat * harbour/make_gnu.cmd * harbour/make_gnu.sh * added information about GTWVT to GT description for Windows * harbour/contrib/rdd_ads/ads1.c * harbour/contrib/rdd_ads/adsfunc.c * harbour/source/rdd/dbf1.c * synced with xHarbour * harbour/source/rtl/console.c ! fixed PROW() updating to be Clipper compatible when row number exceed 16bit integer value * harbour/source/rtl/filesys.c ! fixed possible GPF when hb_fsCurDirBuff() * harbour/source/rtl/str.c * harbour/source/rtl/strzero.c * minor optimizations * harbour/source/rtl/strpeek.c ! fixed accessing the last character in STRPEEK() and STRPOKE() * harbour/include/hbgtinfo.ch * harbour/source/rtl/gtwin/gtwin.c + synced with recent xHarbour modifications * harbour/source/rtl/gtwvt/gtwvt.c * cleaned BCC warning * harbour/include/hbapi.h * harbour/source/vm/codebloc.c * declare BYTE * passed to hb_codeblockNew() as const * harbour/include/hbpcode.h ! fixed the PCODE numbers in PCODE description, 122 was repeated for two different PCODEs: HB_P_ONE and HB_P_MACROLIST * harbour/source/compiler/genc.c ! fixed hb_p_functionshort pcode size returned by genc function ! fixed double value presented in verbose genc mode for HB_P_PUSHDOUBLE ! fixed number of cases presented in verbose genc mode for HB_P_SWITCH * harbour/source/compiler/hbdead.c + added support for dead code elimination in functions which uses SWITCH ...; CASE ...; ...; END syntax * harbour/source/compiler/harbour.c * harbour/source/compiler/hbfix.c ! fixed optimization for HB_P_PUSHLOCALNEAR and HB_P_POPLOCALNEAR. It was a long existing bug not reported so far because 0, 1 and 2 PCODEs uses only one BYTE and bad PCODE tracing in hbfix.c didn't caused bad side effects as long as number of locals in function was smaller then 768. Now for functions HB_P_PUSHLOCAL and HB_P_POPLOCAL is used and later changed to NEAR version in hbfix.c if possible. * harbour/source/compiler/hbfix.c * join sequential jumps to optimize constructions like: while ... ... if ... exit endif enddo * harbour/source/compiler/hbdead.c * remove HB_P_END PCODE also at the and of function if is repeated just before, f.e. in code like (source/rtl/color53.prg): Function RADGRDEFCO( cColor ) if isdefcolor() Return applydefau( cColor, "W/N", "W/N", "W+/N") Else Return applydefau( cColor, 3, 1, 4) endif Return nil Now such redundant constructions like above are fully stripped by compiler anyhow if someone has time and think is important then can clean also this .prg code. * harbour/include/Makefile * harbour/include/hbcomp.h + harbour/include/hbxvm.h * harbour/source/compiler/Makefile * harbour/source/compiler/cmdcheck.c * harbour/source/compiler/genc.c + harbour/source/compiler/gencc.c + harbour/source/compiler/hblbl.c * harbour/source/compiler/hbpcode.c * harbour/source/vm/hvm.c + added support for generating real C code not PCODE in .c files. Now with -gc3 Harbour will generate .c files with real .c code which is later compiled to real machine code. I left PCODE only for code block definitions though it's also possible to have even code block compiled to machine code but we will have to add a flag to codeblock structure which will be checked at runtime and proper method of execution in EVAL will be chosen. If you think it's worth of afford then I can add it too in some spare time. The final binaries are noticable longer then the one which has only PCODE but they are faster. The speed improvement depends on type of operations. The pure Clipper code which does not execute any external time consuming C functions compiled with -gc3 is from 10% to 50% faster. The side effect of generating pure machine code is also harder recompilation but it does not mean that is impossible. If sth can be executed by some machines (virtual or hardware) then it can always be decompiled by definition. This modification opens door for farther optimization, f.e. when we will have fully working strong type support then we can add using native .c types. In fact this module is PCODE to .c translater not part of compiler and can be used as separate module to translate generated PCODE, f.e. .hrb files. Maybe in the future we will change the compiler to generate meta code not directly PCODE and it will be possible to make optimizations on this meta code which will depend on selected output type: VHM PCODE, C code, .NET code, etc. but at this moment adding support for .c compilation directly into compiler will make the compiler code too much complicated for me - IMHO it's better to invest time into clear separation to FRONT_END->REAL_COMPILER->BACK_END Please make test with your code. I rebuild whole Harbour code with -gc3 set in HB_FLAGS in harbour/config/rules.cf and all seems to work correctly. hbtest returns exactly the same results. I also made tests with my programs and they work correctly but I had to define actions for all PCODEs and it's possible that made some typos in some of them which are very seldom used so your tests will be very important.	2006-03-21 01:25:32 +00:00
Przemyslaw Czerpak	d27d272156	2006-02-15 11:15 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/compiler/harbour.c * do not line striping optimization when -l compiler switch (suppress line number information) is set - in such case it's only waste of time * harbour/include/hbapifs.h * harbour/source/common/hbfsapi.c * harbour/source/compiler/cmdcheck.c * harbour/source/pp/pplib.c * harbour/source/rtl/filesys.c * harbour/source/rtl/set.c * cleaned the usage of hb_fsAddSearchPath()/hb_fsFreeSearchPath() It fixes few possible memory leaks and GPF traps.	2006-02-15 10:16:46 +00:00
Przemyslaw Czerpak	a290c984e7	2006-02-04 17:05 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/harbour.spec * harbour/make_bsd.sh * harbour/make_drw.sh * harbour/make_gnu.sh * harbour/make_rpm.sh * harbour/make_tgz.sh * harbour/bin/hb-func.sh * harbour/bin/pack_src.sh * harbour/config/c.cf * harbour/config/global.cf * harbour/config/rules.cf * harbour/config/darwin/gcc.cf * harbour/config/darwin/global.cf * harbour/config/dos/djgpp.cf * harbour/config/dos/global.cf * harbour/config/dos/install.cf * harbour/config/dos/owatcom.cf * harbour/config/hpux/gcc.cf * harbour/config/hpux/global.cf * harbour/config/linux/gcc.cf * harbour/config/linux/global.cf * harbour/config/linux/owatcom.cf * harbour/config/sunos/gcc.cf * harbour/config/w32/watcom.cf * include ADSRDD by default in RPMs * updated for new RPM which does not accept some old tags * set -fPIC on 64bit platforms + added /etc/harbour/hb-charmap.def * updated for new GT system and drivers * harbour/contrib/dot/pp.prg * harbour/contrib/dot/pp_harb.ch * use _APMAIN as startup function * cleaned direct access to item internals * harbour/contrib/libct/Makefile + harbour/contrib/libct/ctwfunc.c + harbour/contrib/libct/ctwin.c + harbour/contrib/libct/ctwin.h * added CT3 like Window System - it's a GT driver which inherits from the existing one and adds CTW functionality * harbour/contrib/libct/screen1.c * updated for GTAPI modifications * harbour/contrib/libnf/Makefile * harbour/contrib/libnf/chdir.c * harbour/contrib/libnf/mkdir.c * harbour/contrib/libnf/rmdir.c * use hb_fs() API functions instead of calling DOS interrupts Now NF dir functions works on all platforms - it will be nice to update other functions too. harbour/contrib/libnf/dispc.c * harbour/contrib/libnf/ftattr.c * updated for GT API modifications, some of this code still depends on EGA/VGA video buffer so will work only if user will force in GT using it - it will be nice to rewrite them * harbour/contrib/odbc/odbc.c * harbour/contrib/ole/ole2.c * casting and cleaning direct access to item internals * harbour/contrib/rdd_ads/ads1.c * harbour/contrib/rdd_ads/adsfunc.c * harbour/contrib/rdd_ads/adsmgmnt.c * synced with xHarbour * harbour/include/Makefile * added new header files + harbour/include/hbgtinfo.ch + added GTI_* defintions for hb_gtInfo() function. This function works in similar way to dbInfo() in RDD. The GTI_* definitions are taken from xHarbour "as is" and they should be cleaned - not all functionality are supported in Harbour and some others should be implemented in differ way then in xHarbour. + harbour/include/hbgtcore.h * harbour/include/hbapigt.h * new GTAPI hbgtcore.h file should not be included by user code it's only for internal use in GT drivers * HB_inkey_enum changed to int - this is bit field not enumerated type. Many of C/C++ compilers forbid bit operations on enum types and forcing it by casting which finally exceeds the enum range is defined as bug because it may badly interacts with some compiler optimizations * harbour/include/hbapi.h * harbour/include/hbapicdp.h * harbour/include/hbapierr.h * harbour/include/hbapifs.h * harbour/include/hbapiitm.h * harbour/include/hbapilng.h * harbour/include/hbapirdd.h * harbour/include/hbdate.h * harbour/include/hbdefs.h * harbour/include/hbinit.h * harbour/include/hbpcode.h * harbour/include/hbrdddbf.h * harbour/include/hbset.h * harbour/include/hbstack.h * harbour/include/hbvm.h * harbour/include/hbvmopt.h * harbour/include/hbvmpub.h * separated internal and external API. Now the definitions for internal HVM structures and functions are excluded by default they could be enabled if user include hbvmopt.h before other header files. Such operation should be done _ONLY_ by core code - if 3-rd party developers make sth like that then it's for their own risk and such code may stop to work with next Harbour versions. Without hbvmopt.h the internal structures like HB_ITEM, HB_DYNS, ... are mapped to 'void' so there is no way to access their members so we can modify them in the future without afford for 3-rd party code. There is one small exception 'type' should be the first member for HB_ITEM structure because I used a small ugly hack in HB_IS_() macros with castin PHB_ITEM to HB_TYPE - it works without speed overhead but if you think that it will be better/cleaner to not use such tricks then it's enough to change HB_ITEM_TYPE() definitions in hbvmpub.h - see note. * cleared the usage of HB_EXPORT - to avoid problems with some C/C++ compilers we agreed that the only one common way of using HB_EXPORT is adding it ad begining of declaration - please keep this convention in the future. + added new functions: hb_extIsObject(), hb_codeblockId(), hb_idleSleep(), hb_fsGetOsHandle(), hb_dynsymFindSymbol(), hb_dynsymGetSymbol(), hb_dynsymSymbol(), hb_dynsymName(), hb_dynsymMemvarHandle(), hb_dynsymAreaHandle(), hb_dynsymSetAreaHandle() * changed hb_arrayClone() declaration to: PHB_ITEM hb_arrayClone( PHB_ITEM pArray ) * changed hb_arrayFromParams() declaration to: PHB_ITEM hb_arrayFromParams( int iLevel ) The previous version needed a pointer to stack relocatable area so any stack resizing could cause GPF. * harbour/include/inkey.ch * added definitions for extended mouse keys/events and some key combinations * harbour/source/codepage/uc1250.c * harbour/source/codepage/uc1251.c * harbour/source/codepage/uc1253.c * harbour/source/codepage/uc1257.c * harbour/source/codepage/uc737.c * harbour/source/codepage/uc850.c * harbour/source/codepage/uc852.c * harbour/source/codepage/uc866.c * harbour/source/codepage/uc88591b.c * harbour/source/codepage/uc8859_1.c * harbour/source/codepage/uc8859_2.c * harbour/source/codepage/uc8859_5.c * harbour/source/codepage/uckoi8.c * harbour/source/codepage/uckoi8u.c * harbour/source/codepage/ucmaz.c * updated unicode values for characters in rabge 1-31 to keep DOS compatibility * harbour/source/common/expropt1.c * harbour/source/common/hbarch.c * harbour/source/common/hbdate.c * harbour/source/common/hbstr.c * harbour/source/common/hbver.c * keep HB_EXPORT at the beginning of function declaration * harbour/include/hbpcode.h * harbour/include/hbcomp.h * harbour/source/compiler/harbour.c * harbour/source/compiler/harbour.y * harbour/source/compiler/hbfix.c + harbour/source/compiler/hbdead.c * harbour/source/compiler/hbpcode.c + harbour/source/compiler/hbstripl.c % rewritten jump optimization ! fixed some minor problems * do not optimize jumps and local variable access by shorter PCODE version and HB_P_NOOP when jump optimization is disabled, this is a note I left in source code in few places: /* * optimizing jumps here by shorting them and setting HB_P_NOOPs * only slow down the compilation process for three reasons: * 1. When it's dummy jump to next instruction we need two passes * in hb_compOptimizeJumps() to fully remove it * 2. hb_compOptimizeJumps() also make jump shortcutting in each pass * 3. When Jump Optimization is disabled (-kJ) then it cause slowness * at runtime because we will have more HVM loops: first for the * shorter jump and next for the HB_P_NOOP PCODE(s) * [druzuz] / + added support for multi passes in jump/dead code elimination (hb_compOptimizeJumps()) By default is set upto three passes. Now hb_compOptimizeJumps() keeps all compiler internal data clean on exist and can be called any times and does not change other compiler's functions behaviors + added dummy jumps elimination + added optimization for: IF .T. IF .F. WHILE .T. WHILE .F. etc. restored empty BEGIN/RECOVER sequence block elimination if Jump Optimization is enabled then it marks the block with HB_P_NOOPS else it cut the generated PCODE + added dead code eliminator (new functions hb_compCodeTraceMarkDead()/ hb_compPCodeTrace() - it works only when Jump Optimization is not disabled) As a result of the above we have smaller and faster PCODE. I do not think that we will have meta code support in the reasonable time and because I need some valid compiler data/structures like updated table of all jumps for real C code (not PCODE in .c files) generation then I decide to make some modifications and the above is in practice a side effect of this work. * harbour/source/rdd/dbcmd.c * harbour/source/rdd/dbf1.c * harbour/source/rdd/rddord.prg * harbour/source/rdd/workarea.c * harbour/source/rdd/dbfcdx/dbfcdx1.c * harbour/source/rdd/dbffpt/dbffpt1.c * harbour/source/rdd/dbfntx/dbfntx1.c * harbour/source/rdd/nulsys/nulsys.c * synced with my modifications in xHarbour * updated for API modifications * harbour/source/rtl/Makefile + added gtsys.c, gtfunc.c, hbgtcore.c * harbour/source/rtl/accept.c * harbour/source/rtl/alert.prg * harbour/source/rtl/cdpapi.c * harbour/source/rtl/console.c * harbour/source/rtl/dates.c * harbour/source/rtl/do.c * harbour/source/rtl/errorapi.c * harbour/source/rtl/errorsys.prg * harbour/source/rtl/file.c * harbour/source/rtl/fserror.c * harbour/source/rtl/fstemp.c * harbour/source/rtl/hbffind.c * harbour/source/rtl/idle.c * harbour/source/rtl/math.c * harbour/source/rtl/oldclear.c * harbour/source/rtl/strmatch.c * harbour/source/rtl/strpeek.c * harbour/source/rtl/valtype.c * harbour/source/rtl/xsavescr.c * updated for API modifications * cleaned some compiler warnings * harbour/source/rtl/filesys.c + added hb_fsGetOsHandle() * updated for API modifications * harbour/source/rtl/gt.c * harbour/source/rtl/gtapi.c * harbour/source/rtl/gtapiu.c + harbour/source/rtl/gtfunc.c + harbour/source/rtl/gtsys.c + harbour/source/rtl/hbgtcore.c * harbour/source/rtl/inkey.c * harbour/source/rtl/maxrow.c * harbour/source/rtl/mouseapi.c * harbour/source/rtl/setcolor.c * harbour/source/rtl/setposbs.c * harbour/source/rtl/shadow.c * new GT API code * harbour/source/rtl/saverest.c * changed default behavior in SEVESCREEN/RESTSCREEN with parameters out of screen range to be Clipper compatible. Added last logical parameter to keep previous behavior for programs which begins to use it. * harbour/source/rtl/seconds.c * include missing header file to fix C++ compilation * make hb_secondsCPU global function * harbour/source/rtl/set.c * make HB_SET_TYPEAHEAD Clipper compatible * harbour/source/rtl/gtcgi/Makefile * harbour/source/rtl/gtcgi/gtcgi.c - harbour/source/rtl/gtcgi/mousecgi.c * rewritten for new GT API some detail behaviors has been changed but I think the current implementation is better for CGI programs output - please check and fix me if necessary * harbour/source/rtl/gtcrs/Makefile - harbour/source/rtl/gtcrs/charmap.prg + harbour/source/rtl/gtcrs/chrmap.c - harbour/source/rtl/gtcrs/debug.map - harbour/source/rtl/gtcrs/eterm.map * harbour/source/rtl/gtcrs/gtcrs.c + harbour/source/rtl/gtcrs/gtcrs.h + harbour/source/rtl/gtcrs/hb-charmap.def - harbour/source/rtl/gtcrs/kbdcrs.c - harbour/source/rtl/gtcrs/keymap.prg - harbour/source/rtl/gtcrs/linux.map - harbour/source/rtl/gtcrs/mousecrs.c * new GTCRS based on my xHarbour and Flagship curses code Please not that at runtime it looks for a file /etc/harbour/hb-charmap.def where user can fully tune output for his terminal. This file is included with proper path in binaries created by make_rpm.sh and make_tgz.sh Ryszard I've removed some of your extensions which are no longer necessary and some other (keyboard sequence redefinition) should be done in a little bit differ way. I would like to talk about it when you test current code. Added support for extended mouse keys (middle button and wheel). * harbour/source/rtl/gtdos/Makefile * harbour/source/rtl/gtdos/gtdos.c - harbour/source/rtl/gtdos/mousedos.c * rewritten for new GT API Fixed some small problems, finished mouse code which for DJGPP is fully Clipper compatible with real mouse SAVE/RESTORE code. For other compilers it should be updated depending on memory model and used DPMI driver (if any). * harbour/source/rtl/gtos2/Makefile * harbour/source/rtl/gtos2/gtos2.c - harbour/source/rtl/gtos2/mouseos2.c * rewritten for new GT API Fixed some problems and finished the mouse code. Please test it - I made all modifications without OS2 and I was not able to make any test. I'm interesting in information if it works and the speed difference - f.e. results from tests/vidtest.prg run with previous and current version. * harbour/source/rtl/gtpca/Makefile * harbour/source/rtl/gtpca/gtpca.c - harbour/source/rtl/gtpca/kbdos2.gcc - harbour/source/rtl/gtpca/mousepca.c * rewritten for new GT API and finished so now it's full functional GT driver I'm interesting in keyboard sequences used by PC-ANSI drivers in DOS so it will be possible to implement also support for extended keys input. * harbour/source/rtl/gtsln/Makefile * harbour/source/rtl/gtsln/gtsln.c + harbour/source/rtl/gtsln/gtsln.h * harbour/source/rtl/gtsln/kbsln.c * harbour/source/rtl/gtsln/keytrans.c * harbour/source/rtl/gtsln/mousesln.c * rewritten for new GT API basing on current xHarbour code added support for slang 1.4x patched for UNICODE (Debian patches used by most of current Linux distributions) and slang 2.x - It's unicode ready, tries to detect terminal mode (utf-8/iso) at startup and switch the internal logic to iso/unicode mode. When compiled with slang 1.4x or 2.x and terminal is in UTF-8 it can display all characters like in DOS if only used font have them or good fall-back table is loaded (f.e. the one created by QRCZAK) Added support for extended mouse keys (middle button and wheel). * harbour/source/rtl/gtstd/Makefile * harbour/source/rtl/gtstd/gtstd.c - harbour/source/rtl/gtstd/mousestd.c * rewritten for new GT API Now it can work as full screen GT driver redrawing the previous screen contents from internal GT core buffers. I run with this GT some of my programs and they work quite well ;-) of course without colors. * harbour/source/rtl/gtwin/Makefile * harbour/source/rtl/gtwin/gtwin.c - harbour/source/rtl/gtwin/mousewin.c * updated for new GT API + harbour/source/rtl/gtxwc/Makefile + harbour/source/rtl/gtxwc/gtxwc.c + harbour/source/rtl/gtxwc/gtxwc.h * new XWindow Console GT driver based on my and Giancarlo Niccolai code form xHarbour - this GT can work in XWindow environment only and create its own window for console output. It delays the initialization to the moment when user try to display anything on the screen so even without X Window system programs which uses this GT can work as long as use only outstd/outerr output. * harbour/source/vm/arrays.c * updated for API modifications + added hb_arrayId(), * changed hb_arrayClone() declaration to: HB_EXPORT PHB_ITEM hb_arrayClone( PHB_ITEM pSrcArray ) * changed hb_arrayFromParams() declaration to: PHB_ITEM hb_arrayFromParams( int iLevel ) * harbour/source/vm/arrayshb.c * updated for API modifications + added new parameter iLevel to function HB_APARAMS() * harbour/source/vm/classes.c * harbour/source/vm/cmdarg.c * harbour/source/vm/dynlibhb.c * harbour/source/vm/estack.c * harbour/source/vm/fm.c * harbour/source/vm/garbage.c * harbour/source/vm/maindll.c * harbour/source/vm/maindllh.c * harbour/source/vm/maindllp.c * harbour/source/vm/mainstd.c * harbour/source/vm/mainwin.c * harbour/source/vm/memvars.c * harbour/source/vm/pcount.c * harbour/source/vm/proc.c * updated for API modifications * harbour/source/vm/codebloc.c * updated for API modifications + added hb_codeblockId() * harbour/source/vm/dynsym.c * updated for API modifications + added new functions: hb_dynsymFindSymbol(), hb_dynsymGetSymbol(), hb_dynsymSymbol(), hb_dynsymName(), hb_dynsymMemvarHandle(), hb_dynsymAreaHandle(), hb_dynsymSetAreaHandle() * harbour/source/vm/eval.c * updated for API modifications * call hb_vmPushState()/hb_vmPopState() in hb_itemDo()/hb_itemDoC() functions - it's necessary to make HVM reentrant safe. * harbour/source/vm/extend.c * updated for API modifications + added hb_extIsObject() similar to existing hb_extIsArray() * harbour/source/vm/hvm.c * updated for API modifications + added new functions: hb_vmPushState(), hb_vmPopState() which save/restore HVM state (the top stack value which can be processed and return item and maybe sth else in the future) making HVM ready for reentrant. * harbour/source/vm/itemapi.c * updated for API modifications + added new function: HB_EXPORT PHB_SYMB hb_itemGetSymbol( PHB_ITEM pItem ); ! fixed bug in hb_itemPutNInt() * harbour/tests/Makefile * harbour/utils/hbdoc/Makefile * harbour/utils/hbextern/Makefile * harbour/utils/hbmake/Makefile * harbour/utils/hbrun/Makefile * harbour/utils/hbtest/Makefile - removed badly added: dbfntx, dbfcdx, dbffpt, hbsix libraries. what broke GNU make compilation for some compilers This libraries should be included automatically when RDD lib is included by .cf files Summary: The whole patch (cvs diff -uN) is ~1.5MB length and I cannot describe everything in details - sorry but it was too much modifications in one commit so now just some of general notes. The header files included as is does not have any information about internal HVM structures and some functions. In practice only HB_SYMB is public and it has to be public for .c files generated from .prg so I force the fixed size of this structure (alignment independent) by redefining some members to union with void - it's a little bit ugly trick but it effectively eliminates the problem of linking binaries compiled with differ alignment C compiler switches. The structures like HB_ITEM, HB_CODEBLOCK, HB_STACK, HB_DYNS are not longer defined and pointers to the defined as void * - like in Clipper the ITEM structure. It caused that I had to add some new functions to make some operation still possible to implement. If I missed sth and any of you will have a problem with your code then please inform me about it and after a small discussion on Harbour developers list we can decide if other functions should be added. The internal API is still accessible. It's enough to include "hbvmopt.h" file before other header files to enable it. Now only files in source/vm directory include it. The 3-rd party code which does not include hbvmopt.h (or tries to set some internals macros) should be safe for future HVM modifications and will work also with new binaries so 3-rd party library developers should remember about it. If they won't then it's only their and their clients problem not Harbour developers. With this modifications I also create new GT model which is similar to the one used by RDD with multi inheritance. It can be quite easy extended to simultaneously load more then one GT subsystem (sth like work areas in RDD) but I left it for the future when someone may need it. hbapigt.h file now contains only information about public functions and does not have any code which depends on current internal implementation - it should be backword compatible as long as somone did not try to use internal GT functions. The internal GT system use hbgtcore.h file which should not be included by 3-rd party code as long as someone will not make new GT driver. The internal GT code is new so I expect that it will be changed yet in the nearest future (I'm waiting for other developers feedback) and in such case any 3-rd party GTs will have to be updated. How it works: The base GT driver (GTNUL) is fully functional GT driver which makes all operations on memory buffer. After each screen write Flush() method is called which check for dispcount() and if it's 0 then call Refresh() method to update modified area by Redraw() method. This method is dummy in GTNUL and external output with this GT can be reached by outstd()/outerr() which are now redirected to GT methods. A simple GT driver may overload only Refresh() method to give full screen output. Application can use only this GT driver and it seems to be very good choice for GUI and background daemon/service programs. This GT is loaded at startup then all other GTs can be loaded later and inherit from the previously loaded GT drivers. The new GT driver can overload as much method as wants/needs. Now all GT operations are implemented as GT method so GT driver can easy change their default behavior, f.e. it may fully overload color parsing methods and use differ or extended to Clipper color definitions. I rewrote all existing GTs to work with new GT model. OS2 users - please test GTOS2 which I was not able to test and see the note in Redraw() method. If possible please make some speed tests. In fact now there is much more internal operations then it was before but because they are done on memory only then current code is much faster in this GT drivers which so far makes all operations on real video area. I made some tests with GTNUL and tests/vidtest.prg and the total overhead is minimal. Now dipbegin()/dispend() in practice does not cost anything so it gives additional speed improvement in application which extensively use it. More then one GT driver can be linked with final binaries and chose on application startup by //GT<NAME> switch and/or environment variable HB_GT=<name> In the RTL is new GT function GTSYS() which works in similar way to RDDSYS() in RDD subsystem and for linking default GT driver for given platform. When RTL is compiled the default GT driver is set to HB_GT_DEFAULT envvar and if not exist to HB_GT_LIB envvar and if it also does not exist to hard coded platfom GTs (see source/rtl/gtsys.c and source/rtl/Makefile for rules) Adding to source code: ANNOUNCE GTSYS disable linking the default GT driver and: REQUEST HB_GT_<name> for linking given (<name>) GT driver, f.e.: REQUEST HB_GT_WIN If you are working in SH environment (Linux and other nixes users, DJGPP bash, MinGW shell then it's possible to use -gt<name> switch in hblnk / hbmk scripts to force linking GT drivers (it could be repeated with different <name>) and the first one becomes the default one. F.e.: xhbmk -m -n -w -es2 -gtcrs -gtsln -gtstd -gtpca vidtest.prg Usually the GT driver are loaded at HVM startup but it's possible to load it later. I created new GT driver CTW which gives full CT3 like Window system. The CT3 extended driver change the behavior of some function in Clipper extended driver, f.e WRITECON() or SETPOS() with parameters out of screen range. So I implemented it CTW as RT GTs which is loaded when some of CTWIN function is used (f.e. WOPEN()/WBOARD()) and inherits from any existing GT driver. This is full CT3 WIN implementation with all detail behaviors I found (with some CT3 bug fixes). It does not have any CT3 limitations and can be used for any virtual screen/window size though I hardcoded CT3 limitation for backword compatibility. If somone will want to remove it then it will be enough to delete few lines from ctwin.c file. I'm not CTWIN Clipper user so maybe I missed some side effects in this driver and was not able to well test it so if you will find any incompatibilities then please inform me. THe default GT buffer uses 32bit character cell internally but in savescreen/restscreen it uses VGA compatible two bytes character cell. Some GT drivers may want to use differ character cell. Now GTCRS and GTSLN use 32bit character cell by default. They need additional information about character set (box/normal) to properly display box characters. It is possible to force in this GT drivers using Clipper compatible character cell by calling: hb_gtInfo( GTI_COMPATBUFFER, <lCompat> ) -> <lPreviousSeting> but in may cause that box drawing characters will be lost in some countries after RESTSCREEN(). It will depend on used code page. HB_GTINFO() is new function which works in similar way to DBINFO() in RDD. It allows to retrieve/change some of GT driver settings. GTI_ actions are defined in hbgtinfo.ch - it has all GTI_* definitions used in xHarbour. Now in Harbour only few of them are implemented. The new three .prg functions: HB_SETKEYCP( <cTermCP> [,<cHostCP>] ) HB_SETDISPCP( <cTermCP> [,<cHostCP>] [,<lBoxChar>] ) HB_SETTERMCP( <cTermCP> [,<cHostCP>] [,<lBoxChar>] ) have been added. They set automatic input (HB_SETKEYCP) and output (HB_SETDISPCP) (or both: HB_SETTERMCP) character translation. They are also important for some GTs which informing them about used internal code page for unicode translation (GTXWC, GTSLN) and/or chosing proper character set (standard/alternate) for letters and other (f.e. box drawing characters) (GTCRS, GTSLN), <cTermCP> is encoding used on external (terminal) side <cHostCP> is encoding used internally, if not given then current code page set HB_SETCODEPAGE() is used. some of GTs which uses unicode output may ignore <cTermCP> <lBoxChar> is optional parameter which interacts with dispbox() output disabling switching to alternate character set in some GTs. It effectively causes that if internal (host) code page contains some letters on the box char positions then they will be shown also by box drawing functions like dispbox() instead of CP437 characters. In some cases it could be useful. By default lBoxChar is not set and GTs which can switch between standard and alternate character set (GTCRS, GTSLN) will try to use alternate character set for box drawing functions. Victor: I removed some of your functions. They can be very easy implemented with hb_gt_GetChar()/hb_gt_PutChar() but I do not want to make them part of documented external API because some GT drivers may want to use absolutely differ color definitions and they will stop to work so I do not want to make this functions documented external API. Ryszard: Setting alternative debug keys does not longer work. I like such possibilities but it should be implemented in differ way to f.e. using HB_GTINFO interface to allow low level GT driver extensions, f.e. in nixes using CTRL+[A-Z] and SIGINT, SIGQUIT, SIGTSTP signals for real asynchronous setting of debug/cancel flag without keyboard polling from main HVM loop. I would like to discus about such more general solution. Please updated non GNU make files *	2006-02-04 16:16:48 +00:00
Antonio Linares	eec485a660	Harbour 64 bits required fix	2006-02-03 14:29:59 +00:00
Ryszard Glab	a46e6aff0f	2006-01-09 14:50 UTC+0100 Ryszard Glab <rglab@imid.med.pl> * include/hbexprb.c * source/compiler/exproptb.c * source/macro/macrob.c * fixed to release the memory if macro compiled code contains a variable or a function reference * source/rtl/filesys.c * added missing '(' to copile correctly on UNIX'es	2006-01-09 13:41:27 +00:00

1 2 3 4 5 ...

261 Commits