* harbour/include/hbclass.ch
! removed:
MESSAGE <msgName> IS <mthName>
used as synonym of:
MESSAGE <msgName> METHOD <mthName>
If someone was using the removed version then please update the
code to MESSAGE ... METHOD ...
The removed command has special meaning in Class(y) and it allow
to define alternate names for existing messages. I'll add support
for them in the future.
* harbour/contrib/hbct/ctwin.c
* added disabled code which is a workaround for some possible
bad side effect caused by online shadow showing by CTWIN.
* harbour/source/rtl/errorint.c
! fixed displaying internal error message
* harbour/source/common/hbver.c
* added "Rev." prefix to shown revision number
* harbour/include/hbexprop.h
* harbour/include/hbexprb.c
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
+ added hb_compExprReduceNegate()
! fixed wrong negate optimizations for platforms where HB_LONG_MAX
is smaller then -HB_LONG_MIN, f.e. all x86 based CPUs.
! fixed setting the size in optimized negative numbers
! fixed some math optimizations to not use casting to double value
when it's not necessary - when double precision is smaller then HB_LONG
(f.e. on x86 it's 53 bits and HB_LONG has 64bit) such casting can damage
up to 11 less significant bits in big 64 bit numbers.
* harbour/source/rtl/hbinet.c
* replaced MAKEWORD() macro with HB_MKWORD() to pacify BCC58 warnings
* harbour/include/hbdefs.h
+ added #include <limits.h>
It should hide some warnings related to redefined integer size constants
Viktor if it will not help for BCC58 warnings then you will have to add
#include <stdint.h>
few lines below but please remember that older BCC version does not
have it so check for the exact compiler version.
! changed macros which setting default numeric item size for more strict
Clipper compatible mode. I'm not a fun of some Clipper behavior in
calculating number size and I left some notes about it in hbdefs.h
Anyhow this and some other modifications below should cover the
differences you've found recently. Some things are not addressed by
me intentionally, f.e. _itemPutNL() in Clipper always set size to 10
without checking the maximum size so it's too small for values less
then -999999999. Harbour compiler makes more compile time optimizations
then Clipper. The formatting rules used by compiler are a little bit
different then by VM so this can be source of some other differences
to Clipper. I can easy create some examples. Harbour supports 64bit
signed integers and Clipper doesn't. This is yet another situation
when we may have different results then Clipper. Most of them can
be hidden if we add new PCODE(s) for integer number with explicit
size but I do not think it's such important to increase PCODE list.
In few cases it will be necessary to disable some optimizations at
all and I do not like it. In the future when I will be adding some
new optimizations I also add compiler switch to disable/enable
optimizations which can have such side effects for people who need
strict formatting.
* harbour/include/hbvmpub.h
* harbour/source/common/hbstr.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* harbour/source/rtl/round.c
* updated for more Clipper compatible number formating using new macros
* source/rtl/tget.prg
+ TGet instance variable ordering in class definition
made CA-Cl*pper compatible, so that it's now possible to
access object vars as array elements the same way.
Read-only access is strongly recommended when using this
unofficial access method, and the practice is overall
discouraged.
NOTE: oGet[8] is not supported in Harbour.
NOTE: in oGet[11] (in C52 mode), oGet[17] (in C53 mode)
only the first char is compatible, which is the
type. The rest is 'trash' in CA-Cl*pper.
* tests/rto_get.prg
+ Extended tests with regards to array access of the
TGet object.
* source/rtl/tbcolumn.prg
* Formatting.
* source/common/hbstr.c
* source/compiler/ppcomp.c
* source/compiler/hbgenerr.c
* utils/hbpp/hbpp.c
! Fixed some BCC58 warnings.
; TOFIX: These remain:
Warning W8017 C:\devl\BCC58\Include\stdint.h 77: Redefinition of 'INT16_MIN' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 78: Redefinition of 'INT32_MIN' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 79: Redefinition of 'INT64_MIN' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 82: Redefinition of 'INT16_MAX' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 83: Redefinition of 'INT32_MAX' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 84: Redefinition of 'INT64_MAX' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 87: Redefinition of 'UINT16_MAX' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 88: Redefinition of 'UINT32_MAX' is not identical
Warning W8017 C:\devl\BCC58\Include\stdint.h 89: Redefinition of 'UINT64_MAX' is not identical
Warning W8084 source\rtl\hbinet.c 507: Suggest parentheses to clarify precedence in function HB_FUN_HB_INETINIT
* utils/hbtest/rt_main.h
! Typo.
* utils/hbtest/make_c5x.bat
+ Cleanups, fixes, enhancements.
* Changed invocation for C53. Now "53" (without quotes)
should be used as command line parameter.
+ Now automatically selects linker.
! Fixed MSC parameters for C53.
+ Copyright added.
* harbour/source/rtl/errorapi.c
* allow to pass NULL instead of PHB_ITEM pointer in argument list
of RT error functions:
hb_errRT_BASE()
hb_errRT_BASE_Ext1()
hb_errRT_BASE_Subst()
hb_errRT_BASE_SubstR()
to not force allocating dummy item in upper level code.
* harbour/source/rtl/mod.c
! small fix in substitued return value in code like:
proc main()
set fixed on
? transform(mod( 12345, 0 ),"")
return
* harbour/utils/hbmake/hbmlang.c
* harbour/utils/hbmake/hbmutils.prg
* harbour/utils/hbmake/hbmake.prg
! removed gtnul library - it does not longer exists
* minor formatting
* source/rtl/tbcolumn.prg
+ TBColumn() instance variable ordering in class definition
made CA-Cl*pper compatible, so that it's now possible to
access object vars as array elements the same way.
Read-only access is strongly recommended when using this
unofficial access method, and the practice is overall
discouraged.
* source/rtl/mod.c
! Fixed error object to be C5x compatible when wrong or too
few parameters were passed to MOD(). Now the previously
corrected MOD() regression tests pass. (I misinterpreted
the problem in the previous ChangeLog entry.)
* utils/hbtest/rt_math.prg
+ Added two new tests for MOD()
* common.mak
+ utils/hbtest/rt_main.h
+ utils/hbtest/rt_miscc.c
* utils/hbtest/rt_str.prg
* utils/hbtest/Makefile
* hbtest/make_c5x.bat
* hbtest/make_xpp.bat
+ Added light framework to implement C level regression tests.
+ Added regression tests for some incompatible Str() conversions.
TOFIX: The problem seems to be in hb_retnl() (and friends,
presumably) where in C5x the internal width gets
modified to 20 when certain value is reached (+/-1000000000),
while in Harbour the length stays 10.
I tried to do the same test using Item API, but I got
so strange results in C, that I finally dropped it.
+ Added optional C compilation using MSC for CA-Cl*pper
build batch file.
+ Added better support to compile the test suite under C5.3.
Caller will need to use "set HB_COMPAT_C53=1" for this mode.
* utils/hbtest/rt_array.prg
! Corrected some (ASize()) expected results when not in 5.3 mode.
* utils/hbtest/rt_str.prg
+ Added comments for some erroneous C5.3 'Str(Val())' results.
* utils/hbtest/rt_math.prg
! Corrected expected C5.2/5.3 result for 'MOD()'.
TOFIX: The Harbour result is different, and in contrary to
C5.x it won't allow to substitue values from the
error handler, when wrong types were passed initially,
which is IMO a bug.
* utils/hbtest/rt_misc.prg
! Some results synced with C5.x (where the result could be
"explained"), two marked as buggy/questionable.
! Two strange Harbour-synced results swapped for the somewhat
more meaningful C5.x ones.
+ Added some more strange date conversion tests.
; All these could be fixed in Harbour to give the exact same
C5.x values even for these strange inputs, but it's by no
means a priority.
* source/rtl/transfrm.c
! FoxPro/XPP feature guarded with HB_COMPAT_FOXPRO || HB_COMPAT_XPP,
meaning that it stays enabled by default because of HB_COMPAT_XPP.
* contrib/rddads/make_b32.bat
* contrib/rddads/make_vc.bat
! Fixed the dir precedence when looking for ace32.dll.
* harbour/ChangeLog
* harbour/harbour.spec
* reverted translation to UTF8 - Tomaz please check your editor
settings and disable automatic translation to UTF8. It's not
the first as such situation happens.
* harbour/include/hbclass.ch
+ added two missing PP directives
! protected against some repeated external definitions
* harbour/source/pp/Makefile
* harbour/source/pp/hbppgen.c
* harbour/source/pp/ppcore.c
* harbour/source/common/hbver.c
* harbour/source/common/hbverdsp.c
* harbour/source/main/harbour.c
* harbour/source/vm/cmdarg.c
* harbour/utils/hbpp/hbpp.c
* harbour/include/hbpp.h
* harbour/include/hbcomp.h
* harbour/include/hbver.h
* harbour/include/hbapi.h
* harbour/make_vcce.mak
* harbour/make_b32.mak
* harbour/make_vc.mak
* harbour/make_gcc.mak
+ added support for dynamically set during compilation ChangeLog entry
ChangeLog ID and SVN revision and compilation flags
Now hbppgen creates in include directory hbverbld.h file with
information extracted from ChangeLog. New hbppgen parameters:
Syntax: ./hbppgen <file>[.prg] [options]
Options: -i<path> add #include file search path
-c[<file>] look for ChangeLog file
-o<file> creates .c file with PP rules
-v<file> creates .h file with version information
-w write preprocessed (.ppo) input file
-q disable information messages
+ added new C functions:
int hb_verSvnID( void )
- retrieves ChangeLog SVN revision number
const char * hb_verSvnChangeLogID( void )
- retrieves a static buffer containing ChangeLog ID string
const char * hb_verSvnLastEntry( void )
- retrieves a static buffer containing ChangeLog last entry string
const char * hb_verFlagsC( void )
- retrieves a static buffer containing build time C compiler
flags in C_USR envvar
const char * hb_verFlagsL( void )
- retrieves a static buffer containing build time linker
flags in L_USR envvar
const char * hb_verFlagsPRG( void )
- retrieves a static buffer containing build time Harbour compiler
flags in PRG_USR envvar
+ added new default PP defines which can be used in .prg code compiled
by Harbour compiler: HB_VER_LENTRY, HB_VER_CHLID, HB_VER_SVNID
* harbour/source/rtl/gtxwc/gtxwc.c
* formatting
* harbour/source/rtl/gttrm/gttrm.c
! fixed redrawing GPM mouse pointer after screen updating
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtpca/gtpca.c
* updated for compilation even if some POSIX macros are not supported
f.e. problems with some DJGPP versions reported recently
* harbour/source/debug/dbgentry.c
* harbour/source/debug/dbgtobj.prg
* harbour/source/debug/dbgbrwsr.prg
* harbour/source/debug/dbgthsh.prg
* harbour/source/debug/tbrwtext.prg
* harbour/source/debug/dbgwa.prg
* harbour/source/debug/debugger.prg
* harbour/source/debug/dbghelp.prg
* harbour/source/debug/dbgtarr.prg
! Fixed object inspector in the debugger.
! Added HbDbBrowser:invalidate() message. Fixes work area browsing in debugger.
! Added an minimalistic TBrowse implementation that is just enough
for internal use by the debugger. Fixes miscellaneous problems e.g.
when debugging a piece of code with RELATIONs turned on.
Fixes by Phil Krylov borrowed from xHarbour.
* harbour/source/rtl/gtos2/gtos2.c
* small changes, removed some un-needed code
- by Maurilio Longo in xHarbour
! use screen buffer in BYTEs instead of USHORTs to avoid possible
problems on big endian machines. I do not know if such OS2 ports
exist but this code should be also endian independent like rest
of Harbour code
* harbour/source/rtl/hbgtcore.c
! Fixed screen buffer corruption on little-endian platforms in
hb_gt_def_ColdArea() - fixed by Phil Krylov in xHarbour - many thanks
* harbour/common.mak
* harbour/source/lang/Makefile
+ harbour/source/lang/msgskiso.c
+ harbour/source/lang/msgskwin.c
+ harbour/source/lang/msgskkam.c
+ harbour/source/lang/msgsk852.c
+ added Slovak national messages by Gyula Bartal - many thanks
* harbour/include/hbapi.h
* harbour/source/vm/arrays.c
! Guarded hb_arraySetNLL() declaration with #ifndef HB_LONG_LONG_OFF.
! Fixed trace in hb_arraySetNInt().
By Phil Krylov borrowed from xHarbour
* harbour/include/hbgtcore.h
! added missing HB_EXTERN_BEGIN / HB_EXTERN_END
By Ron Pinkas borrowed from xHarbour
* harbour/source/rtl/gtos2/gtos2.c
% updated for much faster screen updating in OS2 console - many
thanks for Maurilio Longo for tests and code.
* harbour/source/rtl/cdpapi.c
! fixed CP string translation for CPs with accented equal characters
+ added HB_UTF8CHR( <nUniVal> ) -> <cUtf8Char>
It's compatible with the function HB_UTF8CHR() by Phil Krylov in
xHarbour
* harbour/source/rtl/gtsln/gtsln.h
* removed repeated #include <unistd.h>
* harbour/contrib/hbct/files.c
! fixed FILESEEK() called with 3-rd parameter set to .T. (exact
attribute match)
* harbour/config/os2/global.cf
! added fixes by David Arturo Macias Corona
+ harbour/make_os2_gcc.cmd
+ added build file for GCC OS2 users with minimal environment settings
* harbour/include/hbapi.h
* harbour/source/common/hbver.c
* harbour/source/rtl/gttone.c
* added hb_iswince() and fixed TONE() for WinCE
* harbour/source/rtl/math.c
! added workaround for SIGFPE platforms which generate it instead of
setting errno during execution of math functions
* harbour/source/rtl/gtcrs/hb-charmap.def
! remap 0x9b (155) to '.' in Linux terminals - it's control code
* harbour/source/rdd/dbsql.c
* harbour/source/rdd/workarea.c
* harbour/source/rdd/dbf1.c
! always restore current workarea in WA EVAL() method
! always use EVAL() method for user codeblocks and macros
* harbour/source/rdd/dbcmd.c
! fixed DBRELATION() called without numeric parameters or with 0 to
return first relation expression (Clipper compatible)
* harbour/contrib/hbtip/thtml.prg
! fixed wrongly ported to Harbour xHarbour specific code
* harbour/source/common/hbstr.c
+ added missing const in one declaration
* formatting
* harbour/source/rtl/transfrm.c
! fixed casting for C++ compilers
* harbour/source/rtl/errorapi.c
* harbour/source/rdd/dbfntx/dbfntx1.c
! cleanup warnings
* harbour/source/common/hbtrace.c
* harbour/source/rdd/dbcmdx.c
* harbour/source/rdd/wafunc.c
* harbour/source/rdd/dbffpt/dbffpt1.c
* harbour/source/rdd/hbsix/sxcrypt.c
* formatting
* harbour/contrib/hbct/screen2.c
! fixed possible vary bad bug (memory buffer overflow) in SCREENSTR()
* harbour/source/rtl/hbffind.c
! fixed possible GPF in some *nixes
* harbour/source/vm/classes.c
! do not execute the same destructor inherited from different parent
classes more then once
* harbour/source/rtl/transfrm.c
! fixed bug with '9' used as stop condition of function pattern
this character cannot be stripped, f.e.:
? transform( "abc", "@_99*" )
! fixed bug with '*' or '$' used with @), f.e.:
? transform( -12345, "@) $999999" )
! fixed replacing '.' with ',' when @E is used without picture part, f.e.:
? transform( 123.45, "@E" )
! fixed ',' conversions
? transform( 12.34,"@E ab,cd.ef9,9.99,.--" )
! fixed bug with picture starting with ".", f.e.:
? transform( 0.3456, ".999" )
! fixed "@(" and "@)" conversions, f.e.:
? transform( -12345, "@) 1999*999" )
! fixed late oveflow detection in "@(" and "@)", f.e.:
? transtest( -12345, "@( 6798^999" )
! fixed "@E" conversion for dates to keep user delimiters set in
_SET_DATEFORMAT, f.e.:
set( _SET_DATEFORMAT, "mm:dd:yyyy" ); ? transform( date(), "@E" )
set( _SET_DATEFORMAT, "yyyy<mm>dd" ); ? transform( date(), "@E" )
Please note that Harbour is not strictly Clipper compatible here
because it respects _SET_DATEFORMAT set by user.
! fixed 64bit integer conversion by eliminating conversion to
'double' f.e.:
? transform( 1234567890123456789, "99999999999999999999" )
? transform( -1234567890123456789, "99999999999999999999" )
! some other fixes, see regression test transtst.prg
% speed improvement in numeric conversions
+ harbour/tests/transtst.prg
+ added regression test for transform function
* harbour/utils/hbtest/rt_trans.prg
* disabled transform() tests for "@E" and result smaller then 5 bytes
CA-Cl*pper do not check result size and always exchanges
bytes 1-2 with bytes 4-5 for @E conversion. It's buffer overflow
bug and I do not want to replicate it inside our transform
implementation. It also causes that the results for for strings
smaller then 5 bytes behaves randomly.
In fact precise tests can show that it's not random behavior
but CA-Cl*pper uses static buffer for result and when current one
is smaller then 5 bytes then first two bytes are replaced with
4-5 bytes from previous result which was length enough, f.e.:
? transform( "0123456789", "" )
? transform( "AB", "@E" )
? transform( "ab", "@E" )
Replicating exact CA-Cl*pper behavior it's trivial (it will be enough
to use static buffer two and not check the size of current result) but
IMHO it's bug.
* harbour/source/rtl/round.c
* added strictly Clipper compatible code covered by HB_C52_STRICT
and comment about possible difference in Harbour.
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtxwc/gtxwc.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gttrm/gttrm.c
* harbour/source/rtl/gtwvt/gtwvt.c
+ added HB_GTI_ISUNICODE - it returns logical value with information
about Unicode mode in active GT driver - it's necessary for proper
CP initialization in some GTDs which can work in both mode depending
on client side settings
* harbour/source/rtl/gttrm/gttrm.c
* improved UTF-8 detection
* added automatic PuTTY detection
* improved PuTTY and some xterm key handling
* added some missing RXVT keys
* harbour/source/rtl/cdpapi.c
! fixed unicode values for control codes in default CP437 unicode table
* harbour/source/rtl/gtchrmap.c
! added missing default translation of chr(155) - it's control code
on most of terminals and should not be shown in non UFT-8 mode
* harbour/source/rtl/gttrm/gttrm.c
! do not use alternate character set for box drawing in UTF-8 mode
New Linux consoles disable UTF-8 mode when alternate character set
is enabled
* harbour/contrib/hbct/ctwin.c
* harbour/contrib/hbct/ctwin.h
* harbour/contrib/hbct/ctwfunc.c
* overload ReadKey() method for future window moving when scroll lock
is set and for KEYREAD() implementation.
* store real last key value in CTWIN GT.
* harbour/source/rtl/direct.c
* fixed Clipper compatibility when last character of given path
is directory delimiter or drive delimiter
* harbour/source/rdd/dbf1.c
* added RT error when corrupted memo block address is detected
in DBF file.
* harbour/harbour.spec
* harbour/harbour-ce-spec
* harbour/harbour-w32-spec
* updated for new library names
* harbour/ChangeLog
* harbour/include/hbexprb.c
* formatting
* harbour/source/rtl/net.c
! fixed casting
* harbour/harbour.spec
* harbour/harbour-ce-spec
* harbour/harbour-w32-spec
* harbour/contrib/Makefile
* removed hbzlib - it cannot be longer part of default build
because Viktor removed zlib header files. Viktor sorry but
IMHO you should revert it and also restore ace.h - it creates
serious problems without any valuable addition. Now we will
have to rebuild Harbour on many different platforms and often
it will not be possible to install some libraries. We cannot
force installing additional libs by people who will create
binaries for incoming releases so it's important to revert
it. Please do it.
* harbour/config/bsd/install.cf
* harbour/config/darwin/install.cf
* harbour/config/hpux/install.cf
* harbour/config/linux/install.cf
* harbour/config/sunos/install.cf
* harbour/config/dos/install.cf
* harbour/config/os2/install.cf
* harbour/config/w32/install.cf
* redirected echo error messages to stderr when *sh shell is used
* harbour/config/lib.cf
* harbour/config/bin.cf
* harbour/config/global.cf
* harbour/config/hpux/gcc.cf
* harbour/config/hpux/global.cf
* harbour/config/darwin/gcc.cf
* harbour/config/darwin/global.cf
* harbour/config/dos/owatcom.cf
* harbour/config/dos/global.cf
* harbour/config/dos/rsx32.cf
* harbour/config/global.cf
* harbour/config/linux/owatcom.cf
* harbour/config/linux/global.cf
* harbour/config/os2/gcc.cf
* harbour/config/os2/global.cf
* harbour/config/sunos/gcc.cf
* harbour/config/sunos/global.cf
* harbour/config/bsd/global.cf
* harbour/config/w32/owatcom.cf
* harbour/config/w32/bcc32.cf
* harbour/config/w32/gcc.cf
* harbour/config/w32/rsxnt.cf
* harbour/config/w32/global.cf
! fixed build process. DOS and WINDOWS users should make tests for
different compilers. I tested only DOS-OpenWatcom, DOS-DJGPP,
W32-BCC32, W32-OpenWatcom, W32-POCC, W32-XCC and corss builds
W32-MinGW, W32-MinGW-CE. OS2 version not testes at all - I hope
it will work. LINUX-GCC, LINUX-G++, LINUX-OpenWatcom, BSD-GCC,
HPUX-GCC tested and they are working. I hope that SunOS version
also works though I do not have any solaris installation where
I can make real tests.
* bin/hb-func.sh
+ Updated for lib name change.
Please test & review.
* source/rtl/net.c
* include/hbapi.h
+ Added hb_netname() and hb_username() low level versions
of NETNAME() and hb_USERNAME().
* include/hbextern.ch
* source/rtl/net.c
* contrib/xhb/hbcompat.ch
! Removed non-compatible xhb extension from NetName().
+ hb_UserName() function added with the above functionality.
! Slight correction to the Win32 branch of hb_UserName().
+ Added compatibility translations to NetName(1) for
xhb lib users (enough to #include "hbcompat.ch").
* include/hbapierr.h
* source/rtl/errorapi.c
! Removed HB_ERR_SS_TOOLS non-core #define (formerly used by
/contrib/hbct from core header.
! Removed non-core related error API call hb_errRT_TOOLS()
(functionality was similar to hb_errRT_BASE())
* contrib/hbct/ctnet.c
! Fixed RTE calls to use unique IDs instead of 9999.
Subcode changed to 0 from 999.
* utils/hbpp/hbpplib.c
! Replaced RTE code 9999 with 1001.
* source/rtl/objfunc.prg
! Fixed ISNUMBER() -> hb_ISPOINTER() for pointers.
Thanks to Chen Kedem.
* utils/hbtest/rt_stra.prg
* utils/hbtest/rt_array.prg
! Fixed expected results to use the recently introduced new error codes.
Thanks to Chen Kedem.
* harbour-ce-spec
* harbour-w32-spec
* bin/bld.bat
* harbour.spec
* common.mak
* source/pp/Makefile
* source/lang/Makefile
* source/macro/Makefile
* source/rtl/Makefile
* source/vm/mainstd/Makefile
* source/vm/Makefile
* source/vm/mainwin/Makefile
* source/main/Makefile
* source/debug/Makefile
* source/codepage/Makefile
* source/common/Makefile
* source/rdd/nulsys/Makefile
* source/rdd/Makefile
* source/rdd/hsx/Makefile
* source/rdd/usrrdd/Makefile
* source/compiler/Makefile
* contrib/hbct/tests/Makefile
* contrib/hbodbc/tests/bld_b32.bat
* contrib/hbole/tests/bld_b32.bat
* contrib/hbapollo/tests/bld.bat
* contrib/hbfbird/tests/bld_b32.bat
* contrib/hbfbird/tests/Makefile
* contrib/hbpgsql/tests/Makefile
* contrib/hbfimage/tests/bld_b32.bat
* contrib/hbgd/tests/bldtest.bat
* contrib/hbmisc/tests/Makefile
* contrib/hbgf/tests/bld_b32.bat
* contrib/hbbtree/tests/Makefile
* contrib/examples/guestbk/Makefile
* contrib/examples/pe/Makefile
* contrib/examples/dbu/Makefile
* contrib/examples/misc/Makefile
* contrib/examples/hscript/Makefile
* utils/hbdoc/Makefile
* utils/hbextern/Makefile
* utils/hbdot/Makefile
* utils/hbmake/Makefile
* utils/hbmake/hbmutils.prg
* utils/hbmake/hbmake.prg
* utils/hbpp/Makefile
* utils/hbpptest/Makefile
* utils/hbtest/Makefile
* utils/hbrun/Makefile
* tests/Makefile
* Core libs renamed to be prefixed with hb, while
having the first significant 5 chars unique.
Old name New name
-------- --------
codepage -> hbcpage
common -> hbcommon
compiler -> hbcplr
debug -> hbdebug
hbsix -> hbsix
hsx -> hbhsx
lang -> hblang
macro -> hbmacro
pp -> hbpp
rtl -> hbrtl
vm -> hbvm
rdd -> hbrdd
dbfcdx -> rddcdx
dbffpt -> rddfpt
dbfntx -> rddntx
nulsys -> hbnulrdd
usrrdd -> hbusrrdd
mainwin -> hbmainwin
mainstd -> hbmainstd
NOTE/TODO: We're currently not in sync with contribs,
regarding hb prefixing, since in contrib
rdds and gts (rightly) also have hb prefixes.
The only reason not to add them in core this
time, is to keep compatibility with DJGPP.
Maybe we should remove those prefixes from
contrib.
NOTE/TODO: Do tests in as many platforms and as many contrib
tests as possible. Feedback from hbmake users is
also welcome.
!!! Please update your local make files !!!
* include/hbgtinfo.ch
+ Added HB_ prefixed versions for all GTI_ macros.
Unprefixed GTI_ macros are to be considered xhb
compatible (or legacy) ones, and they can be
excluded by #defining HB_GT_NO_XHB if they seem to
collide with user code.
TODO: Switch to use HB_GTI_* inside Harbour code.
* harbour/source/vm/estack.c
* added missing static to s_initSymbol declaration
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/scroll.c
* formatting
* harbour/common.mak
* added empty line necessary for some make systems (f.e. wmake)
* harbour/bin/hb-func.sh
* changed system libs order to avoid problems on some platforms
* harbour/bin/pack_src.sh
* collect information about repository files using 'svn status -v'
command instead of scanning .svn/entries files to avoid problems
with different formats used by SVN
* harbour/include/hbchksum.h
* harbour/include/hbset.h
! added missing extern in few function prototypes
* harbour/include/hbclass.ch
* use HB_CLS_PARAM_LIST macro instead of ... for strict C52 mode
* harbour/source/common/hbfsapi.c
+ added missing const to one declaration
* harbour/source/common/hbstr.c
* minor cleanup in hb_stricmp()
* harbour/source/rtl/inkey.c
! casting to avoid negative values during char to int translation
* harbour/source/rtl/mouse53.c
* added one internal definition
* harbour/source/rtl/philes.c
* removed unnecessary #include(s)
* added missing const to one declaration
* harbour/source/rtl/valtype.c
* harbour/source/vm/hashfunc.c
* cleanup RT error call to eliminate hb_paramError() function
* harbour/source/pp/pplib.c
* harbour/source/vm/runner.c
* harbour/source/vm/debug.c
* harbour/source/vm/arrayshb.c
* harbour/source/vm/classes.c
* harbour/source/vm/hvm.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtfunc.c
* harbour/source/rtl/hbinet.c
* harbour/source/rtl/hbregex.c
* harbour/source/rtl/idle.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/hbtoken.c
* harbour/source/rtl/direct.c
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/dbcmd53.c
* harbour/source/rdd/fieldhb.c
* harbour/source/rdd/hbsix/sxcompr.c
* harbour/source/rdd/hbsix/sxcrypt.c
* harbour/source/compiler/hbcmplib.c
* harbour/contrib/hbrddads/adsfunc.c
* harbour/contrib/hbrddads/adsmgmnt.c
- removed unnecessary calls to hb_ret()
% replaced hb_itemRelease( hb_itemReturn( pItem ) ) with
hb_itemReturnRelease( pItem )
% replaced hb_itemPut*( hb_arrayGetItemPtr( pArray, ... ), ... ) with
hb_arraySetNI( pArray, ... )
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/contrib/xhb/cstructc.c
* harbour/contrib/hbw32/w32_ole.c
* harbour/contrib/hbgtwvg/wvtcore.c
* cleaned typos with double ;;
* harbour/source/vm/extend.c
* harbour/source/rtl/math.c
* cleaned HB_EXPORT usage
* harbour/source/pp/ppcore.c
! fixed Harbour extension which allows to use match marker
at the beginning of rule definition
* harbour/source/main/harbour.c
! fixed hex conversion in FM log module - fix done by Phil Krylov
in xHarbour
* harbour/source/rdd/nulsys/nulsys.c
+ added dummy version of DBEVAL() and DBFILTER() - these functions
are used in RTL
* harbour/contrib/hbct/bitnum.c
+ added INTNEG(), INTPOS()
+ harbour/contrib/hbct/ctrand.prg
+ added RANDOM(), RAND() - borrowd from xHarbour by Pavel Tsarenko
+ harbour/contrib/hbct/setrc.c
+ added SETRC()
* harbour/contrib/hbct/getinput.prg
% minor optimization
* harbour/contrib/hbct/Makefile
* harbour/contrib/hbct/common.mak
* updated for new files
* harbour/contrib/hbnf/tempfile.prg
* use HB_FTempCreate() - modification borrowed from xHarbour
TOFIX this function uses hb_isbyref() which does not exist
in Harbour
* harbour/config/w32/msvc.cf
+ added -nologo flag for cl.exe (Phil Krylov's modification borrowed
from xHarbour
* harbour/config/w32/mingw32.cf
- removed repeated definitions
* harbour/config/w32/install.cf
! added alternative install rule for command.com with max line size limit
* include/hbclass.ch
! Enabling HB_CLS_NO_DECORATION if compiled with HB_C52_STRICT,
since in strict mode some PP extensions required by the
decoration feature are not available.
(Thanks Przemek for the tip)
* source/rtl/tpopup.prg
! Fixed typo in POPUPMENU():getAccel(), causing wrong
position being returned. Reported by Jose Miguel.
* source/rtl/ttopbar.prg
! Changed HB_C52_STRICT guards to HB_EXTENSION.
* harbour/bin/hb-mkslib.sh
+ added -fPIC to GCC parameters - it's necessary on some platforms
+ use .sl suffix for shared library in HP-UX
* harbour/bin/hb-func.sh
+ use .sl suffix for shared library in HP-UX
* harbour/bin/postinst.bat
* removed < > from email address
* harbour/include/hbgtcore.h
* harbour/source/rtl/gtkeycod.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtpca/gtpca.c
* fixed typo in function name - it should be hb_gt_dos_keyCodeTranslate()
not hb_gt_dos_keyCodeTanslate()
* harbour/make_tgz.sh
* updated for non GNU tar versions
* harbour/ChangeLog
* replaced TABs with SPACEs
* harbour/bin/pack_src.sh
* try to detect GNU tar
* harbour/make_xmingw.sh
* added new default location for MinGW cross-compiler in Gentoo
distribution
* added auto detection of MinGW cross-compiler installation which
should work in most cases when default location test fails
* harbour/make_tgz.sh
* try to detect GNU make and GNU tar
* harbour/source/rtl/gtwvt/gtwvt.c
* call hb_gt_wvt_InitWindow explicitly to eliminate problems
with ignored WM_CREATE message when new window handler is not
yet registered
* harbour/bin/hb-func.sh
* added system libraries necessary for linking some of harbour
contrib libs in WinCE
* minor cleanup
* harbour/source/rtl/gtxwc/gtxwc.c
* added missing 'const' in declaration
* harbour/include/hbmath.h
* harbour/source/rtl/math.c
* cleaned matherr API, now it works in the same way on all
platforms - this modification fixes also some strange
results when math functions were called with wrong arguments
on some platforms
* harbour/contrib/hbct/trig.c
* harbour/contrib/hbct/finan.c
* harbour/contrib/hbct/ctmath2.c
* updated for new matherr API and cleaned some minor problems
* harbour/contrib/hbct/files.c
! use DATE and TIME parameters formated like for DOS in OS2
version of SETFDATI() - David, if possible please repeat
the test from my previous commit, thank you.
* bin/bld.bat
! %HB_USER_LIBS% (for bcc32) moved to the beginning of the lib list.
* contrib/mtpl_b32.mak
! Fixed preprocessor error in line 190 when HB_INSTALL_PREFIX != HB_ROOT
* source/rtl/getsys53.prg
* source/rtl/getsys.prg
! Moved ReadStats() to getsys52.prg
* ChangeLog
! Removed UTF-8 signature from the beginning of the file.
Unfortunately accented chars got converted to UTF8, which
would need to fixed.
Pritpal, please turn off this feature on your editor for Harbour.
