* include/hbsocket.h
* src/rtl/hbsockhb.c
+ added socket filters to standard socket API.
At C level hb_sockex*() function with PHB_SOCKEX handler can be
used to operate on socket filters. At PRG level standard hb_socket*()
functions can be used.
The following things has been changed in PRG hb_socket*() functions:
hb_socketErorrString() can accept <pSocket> as 1-st or 2-nd parameter
and redirect call to socket filter errorStr() method.
hb_socketClose() executes automatically shutdown() for connected
sockets - it is important in windows only where without explicit
call to shutdown() before close transmitted data can be lost.
hb_socketSend() and hb_socketRecv() can be redirected to filter
streams if filter set such redirection. If filter does not redirect
them then they operate on raw sockets. If hb_socketSend() is
redirected then sent data is flushed automatically.
The following new PRG functions has been added:
Add/replace socket filter:
hb_socketSetFilter( <pSocket>, [<cFilterName>], [<hParams>] )
-> <pSocket> | NIL
<cFilterName> is filter name, It's possible to set many filters
in single hb_socketSetFilter() call separating filter names
with "|" character, i.e.:
pSock := hb_socketSetFilter( pSock, "ZSOCK|BFSOCK", hParams )
<hParams> is hash array with initialization parameters used by
given socket filter. The core implementation recognize the
following settings:
"readahead" - numeric value with size of read ahead buffer
"flush" - numeric value with auto flush parameter (for more
information look at hb_socketAutoFlush() below)
"redir" - logical value which can be use to enable/disable
hb_socketSend() and hb_socketRecv() redirection
to filter stream.
Return filter name used by socket:
hb_socketGetFilter( <pSocket> ) -> <cFilterName>
Read from socket stream:
hb_socketRead( <pSocket>, @<cData>, [<nLen> = Len( cData )],
[<nTimeout> = FOREVER] ) -> <nRead>
this function is similar to hb_socketRecv() but is always
redirected to socket stream filters.
Write to socket stream:
hb_socketWrite( <pSocket>, <cData>, [<nLen> = Len( cData )],
[<nTimeout> = FOREVER] ) -> <nWritten>
this function is similar to hb_socketSend() but it is always
redirected to socket stream filters. Written data is not flushed
by default and it should be flushed explicitly by hb_socketFlush().
Automatic flushing can be enabled by hb_socketAutoFlush() function.
Flush data written to socket:
hb_socketFlush( <pSocket>, [<nTimeout> = FOREVER], [<lSync>] )
-> <nNotFlushed>
<lSync> parameter is logical value which can be used to force
special synchronization method in some filters. Usually users
do not have to use it in normal code.
Enable/disable automatic flushing of written data.
hb_socketAutoFlush( <pSocket>, [ <nTimeout> ] ) -> <nTimeout>
<nTimeout> is timeout for automatic flush operation on written
data in milliseconds. <nTimeout> = -1 means wait forever and
<nTimeout> = 0 disables auto flush.
automatic flushing can help in adopting existing code anyhow it
may strongly reduce the performance in some filters, i.e.
compression filters like ZSOCK have to add special data to the
stream after each flush operation so it's suggested to call
flush explicitly when we want to force delivering written data
to the peer.
* include/hbznet.h
* src/rtl/hbznet.c
+ added ZNET socket filter - compressed and encrypted streams are
compatible with hb_znet*() streams. The old hb_znet*() interface
is obsolete for pure socket communication and if not used as
hb_inet*() filter then should be replaced by hb_sockex*() in
user programs.
ZNET socket filter can be created by new PRG functions:
hb_socketNewZNet( <pSocket>, [<cPass>], [<nCompressionLevel>], ;
[<nStrategy>] ) -> <pSocket> | NIL
or by standard socket API with "ZNET" as filter name.
ZNET filter recognize the following settings in initialization
hash array:
"key" or "pass" - string with encryption password
"zlib" - numeric compression level (HB_ZLIB_COMPRESSION_*)
"zs" - numeric ZLIB compression strategy (HB_ZLIB_STRATEGY_*)
ZNET filter always disables any other filters and operates on raw
socket.
Please remember that it's optional module. If programmer does not
use hb_socketNewZNet() explicitly and prefers using hb_socketNew()
then he should force linking this module by REQUEST hb_socketNewZNet
+ added fSync parameter to hb_znetFlush()
[INCOMPATIBLE]
* src/rtl/hbinet.c
* call flush filter function before socket is closed
* src/rtl/Makefile
+ src/rtl/hbzsock.c
+ added ZSOCK socket filter - ZLIB and GZIP compression for socket
streams.
ZSOCK socket filter can be created by new PRG functions:
hb_socketNewZSock( <pSocket>, [<hParams>] ) -> <pSocket> | NIL
or by standard socket API with "ZSOCK" as filter name.
Programmers using hb_socketNew() can force linking this module by
REQUEST hb_socketNewZSock
ZSOCK filter can be used with other filters.
ZSOCK filter recognize the following settings in initialization
hash array:
"zlib" - numeric compression level (HB_ZLIB_COMPRESSION_*)
"zs" - numeric ZLIB compression strategy (HB_ZLIB_STRATEGY_*)
"zin" - logical value which allow to enable/disable ZLIB
decompression on input stream (default)
"gzin" - logical value which allow to enable/disable GZIP
decompression on input stream - it's possible to
enable both ZLIB and GZIP decompression together
so both streams can be decompress
"zout" - logical value which allow to enable/disable ZLIB
compression on output stream (default)
"gzout" - logical value which allow to enable/disable GZIP
compression on output stream - if both "zout" and
"gzout" are enabled GZIP compression is used.
* src/rtl/Makefile
+ src/rtl/hbbfsock.c
+ added BFSOCK socket filter - BlowFish input and output stream
encryption in CTR mode.
BFSOCK socket filter can be created by new PRG functions:
hb_socketNewBFSock( <pSocket>, [<hParams>] ) -> <pSocket> | NIL
or by standard socket API with "BFSOCK" as filter name.
Programmers using hb_socketNew() can force linking this module by
REQUEST hb_socketNewBFSock
BFSOCK filter can be used with other filters, i.e. with ZSOCK.
Please only remember that good encryption algorithms have to
generate data which cannot be compressed so using "BFSOCK|ZSOCK"
only wastes resources and correct filter order is "ZSOCK|BFSOCK".
BFSOCK filter recognize the following settings in initialization
hash array:
"key" or "pass" - string with encryption password
"iv" - string with initialization vector for CTR mode
* contrib/hbssl/hbssl.ch
* contrib/hbssl/hbssl.h
* contrib/hbssl/hbssl.hbm
* contrib/hbssl/hbssl.hbx
* contrib/hbssl/ssl.c
* contrib/hbssl/ssl_inet.c
+ contrib/hbssl/ssl_sock.c
+ added SSL socket filter
SSL socket filter can be created by new PRG functions:
hb_socketNewSSL_connect( <pSocket>, <pSSL> [, <nTimeout> ] )
-> <pSocketSSL> | NIL
hb_socketNewSSL_accept( <pSocket>, <pSSL> [, <nTimeout> ] )
-> <pSocketSSL> | NIL
or by standard socket API with "SSL" as filter name.
Programmers using hb_socketNew() can force linking this module by
REQUEST hb_socketNewSSL_connect
or
REQUEST hb_socketNewSSL_accept
SSL filter always disables any other filters and operates on raw
socket.
SSL filter recognize the following settings in initialization hash
array:
"ctx" or "key" - pointer SSL item <pSSL>
"timeout" - timeout (numeric)
"client" - logical value indicating client mode (SSL_connect())
"server" - logical value indicating server mode (SSL_accept())
* contrib/hbssl/tests/inetssl.prg
! cleaned typo in local function name
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/netiosrv.c
* use new Harbour extended socket API (hb_sockex*()) instead of
raw sockets and hb_znet*()
* contrib/hbtcpio/tcpio.c
* use new Harbour extended socket API (hb_sockex*()) instead of
raw sockets
+ implemented hb_fileFlush()
* contrib/hbtcpio/tcpio.c
* contrib/hbtcpio/hbtcpio.hbx
+ added new PRG function
hb_vfFromSocket( <pSocket> ) -> <pFile>
It converts socket created by socket open into TCPIP virtual file
which works just like files created by hb_vfOpen( "tcp:...", ... )
* include/hbapifs.h
* src/rtl/filesys.c
+ added new C function
HB_SIZE hb_fsPipeWrite( HB_FHANDLE hPipe, const void * buffer,
HB_SIZE nSize, HB_MAXINT nTimeOut );
+ implemented hb_fsPipeUnblock() in OS2 builds
+ set IO error in hb_fsPipeCreate(), hb_fsIsPipeOrSock() and
hb_fsPipeUnblock()
* return ( HB_SIZE ) -1 from hb_fsPipeRead() if end of stream is
reached or read error appears on non empty buffer. This modification
also change the behavior of PRG hb_PRead() function so now result -1
can be used to detect end of stream.
* src/rtl/philes.c
* include/harbour.hbx
+ added new PRG function:
hb_PWrite( <nPipeHandle>, <cBuffer>, [<nBytes>], [<nTimeOut>] )
-> <nBytesWritten>
% removed unnecessary assignment
* include/hbapiitm.h
+ added HVM internal macro hb_itemRawSwap()
* src/vm/asort.c
% use hb_itemRawSwap()
* in old code use comparison which prefers < and > operators
instead of <= and >=
* src/rtl/gtxwc/gtxwc.c
* src/rtl/mlcfunc.c
* pacified new GCC C++ warnings
* src/rtl/hbsocket.c
* do not execute select() if HVM exception was generated when
socket handlers are extracted but return an error immediately
2015-07-31 14:04 UTC+0200 Viktor Szakats (vszakats users.noreply.github.com)
* include/hbapifs.h
* src/rtl/filebuf.c
* src/rtl/vfile.c
+ add C-level hb_fileSizeGet() function
* update HB_VFSIZE() to use hb_fileSizeGet() when passed a filename
It means now HB_VFSIZE() works for non-virtual filenames
just like HB_FSIZE() did.
* src/rtl/teditor.prg
! fixed hb_ULen() wrongly used instead of Len() for arrays
% use byte oriented functions (hb_B*()) instead of character
ones (hb_U*()) to update color strings
* src/rtl/chruni.c
* added new functions hb_BStuff() and hb_UStuff()
* src/rtl/Makefile
- src/rtl/padc.c
- src/rtl/padl.c
- src/rtl/padr.c
+ src/rtl/padx.c
* added new functions hb_BPadL(), hb_BPadR(), hb_BPadC(),
hb_UPadL(), hb_UPadR() and hb_UPadC()
* include/harbour.hbx
* updated
* src/rtl/memoedit.prg
* src/rtl/teditor.prg
* use hb_U*() functions for string manipulation - now it works
correctly with mulitbyte encodings even if HVM CP does enabled
character indexing, i.e. "UTF8"
* src/rtl/vfile.c
* pacified BCC warnin
* src/rtl/filesys.c
* src/rtl/fssize.c
* use GetFileAttributesEx() if available in given windows version
to get file size and time
* include/hbapifs.h
* src/rtl/filebuf.c
* src/rtl/filebufd.c
* src/rtl/filesys.c
* src/rtl/vfile.c
* src/rtl/iousr.c
* src/rdd/dbfcdx/dbfcdx1.c
* src/rdd/dbffpt/dbffpt1.c
* src/rdd/dbfnsx/dbfnsx1.c
* src/rdd/dbfntx/dbfntx1.c
* src/rdd/hsx/hsx.c
* contrib/hbcomio/comio.c
* contrib/hbmemio/memio.c
* contrib/hbtcpio/tcpio.c
* contrib/hbnetio/netio.h
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/netiosrv.c
* changed HB_USHORT uiAttr parameter to HB_FATTR nAttr
in hb_fsExtOpen() and hb_fileExtOpen()
* include/fileio.ch
* src/rtl/vfile.c
+ added support for FO_DEFAULTS in hb_vfOpen().
When this flag is used in <nModeAttr> parameters then new
_SET_DEFAULT is respected when new file is created and
_SET_DEFAULT + _SET_PATH when file is opened.
+ added support for checking file size by it's in hb_vfSize()
so it can work like hb_FSize() but for virtual FS not only
for local files. Now this function has the following syntax:
hb_vfSize( <pHandle> | <cFileName> [, <lUseDirEntry> ] ) -> <nSize>
The 2-nd parameter <lUseDirEntry> is significant only when
the 1-st one <cFileName> is character value.
* src/rtl/gttrm/gttrm.c
* replaced C++ comments with ANSI ones
* src/rtl/vfile.c
* updated casing of function names in comments
* return F_ERROR instead of NIL hb_vfHandle() when wrong parameter
is given (borrowed from Viktor's branch)
* added C function hb_fileParamGet() borrowed from Viktor's branch
* src/rtl/filesys.c
* variable localization (synced with Viktor's branch)
* src/rtl/disksphb.c
! fixed bug with potentially uninitialized buffer
(fix borrowed from Viktor's branch)
* src/rtl/gttrm/gttrm.c
* gives the highest priority to terminal type specified by <params>
in //gttrm:<params> switch
+ added support for extended XTERM colors.
It can be enabled by EXCLR GTTRM parameter.
So far GTTRM used only standard 8 ANSI colors combined with BOLD
and BLINK attributes to highlight text and/or background.
Such functionality is supported by nearly all color terminals
so is well portable but in some cases BOLD and BLINK attributes
where interpreted differently.
Now for XTERM compatible terminals GTTRM can use also other
methods of color settings. They can be enabled by //gttrm:exclr<n>
application command line switch, i.e.:
//GTTRM:EXCLR=0 - use 8 ANSI colors with BLINK and BOLD
attributes (current default behavior)
//GTTRM:EXCLR=1 - use XTERM 16 extended colors
//GTTRM:EXCLR=2 - use XTERM 256 extended colors
//GTTRM:EXCLR=3 - use XTERM RGB colors
(//GTTRM:EXCLR without number is the same as //GTTRM:EXCLR=1)
If terminal supports XTERM extended color escape sequences then
it's possible to enable 16 colors even if BLINK and BOLD does
not do that and if terminal support XTERM RGB color escape
sequences then also colors set by HB_GTI_PALETTE will be shown
(so far HB_GTI_PALETTE in GTTRM was working only for Linux and
PuTTY which support: ESC ] P <n> <rr> <gg> <bb> escape sequence).
Warning: I added above modes to test different terminals.
It's possible that I'll change it after tests.
* include/harbour.hbx
* src/rtl/cdpapihb.c
+ added new PRG function:
hb_cdpIsCharIdx( [ <cCdpID> ] [, <lNewMode>] ) -> <lPrevMode>
It returns .T. when given codepage uses custom character indexes
instead of byte indexes.
If <cCdpID> is not specified then current HVM codepage is used.
Optional logical parameter <lNewMode> allows to enable/disable
custom character indexes in codepages which have such functionality,
i.e. UTF8, BIG5, CP950.
* src/rtl/rtlshort.c
* removed __QUITCANCEL() - this function does not exist in Cl*pper.
* contrib/hbmzip/mzip.c
* src/rtl/filesys.c
! initialize tm_isdst member of tm structure with -1 to force correct
local time to UTC conversion in mktime()
* src/rtl/filesys.c
! fixed FXO_TRUNCATE flag used without FXO_SHARELOCK in POSIX systems
* src/rtl/net.c
! typo in variable name
* src/vm/task.c
! variable scope
* src/compiler/compi18n.c
* minor variable type update
* ChangeLog.txt
! formatting
* src/rtl/Makefile
* src/rtl/net.c
+ src/rtl/netusr.c
* moved hb_UserName() to separate file. It uses internally getpwuid()
in *nix builds and access to this function adds additional library
dependency which may block static builds in some cases.
TODO: eliminate hb_UserName() from things like initial random seed
to not create unnecessary dependency.
* contrib/gtqtc/gtqtc1.cpp
+ enable software input panel (virtual keyboard) in iOS builds
* src/rtl/itemseri.c
! fixed stupid typo which could cause buffer overrun during
serialization of hash items with default value.
Tanks to Abe for reporting the problem.
* include/harbour.hbx
* src/vm/cmdarg.c
+ added new PRG function
hb_ACmdLine() -> <array>
borrowed from Viktor's branch (2015-03-12 03:02 UTC+0100 Viktor Szakats)
It returns array with all command line parameters. Unlike
hb_AParams( __dbgProcLevel() - 1 )
hb_ACmdLine() returns all parameters also hidden ones just like
hb_CmdLine() function and hb_argv()/hb_argc()
Please also remember that hb_AParams() returns current value of
parameters which could be changed bu user code so they can be different
then original parameters passed to given function.
* src/rtl/gtchrmap.c
* casting
* include/std.ch
* synced casing with Viktor's branch
* include/hbapi.h
! fixed HB_ISMEMO() macro, original version was accepting the same
items as HB_ISCHAR() so it was not compatible with ISMEMO() macro
in Cl*pper.
* src/rtl/valtype.c
* use HB_ISMEMO() macro
* src/rdd/dbf1.c
* src/rtl/hbinet.c
* pacified warnings (Thanks to Grigory)
* src/rdd/dbcmd.c
* src/rdd/wafunc.c
* small code simplification and cleanup
! protection against GPF when wrong parameters are passed to __dbArrange()
+ added support for transferring records using __dbArrange() to area with
different fields order (low level driver may refuse to finish such
operation but not it's possible.
* contrib/hbssl/tests/inetssl.prg
* contrib/rddads/ads1.c
* src/rtl/teditor.prg
* formatting of my recent modifications taken from Viktor's branch
* src/common/hbfsapi.c
* src/compiler/complex.c
* formatting
* include/hbset.h
* src/vm/set.c
* src/nortl/nortl.c
+ add new C functions to change HVM set values:
hb_setSetFileCase(), hb_setSetDirCase(), hb_setSetDirSeparator(),
hb_setSetTrimFileName()
* include/hbcomp.h
* include/hbcompdf.h
* src/compiler/cmdcheck.c
* src/compiler/hbmain.c
* src/compiler/ppcomp.c
* src/compiler/genc.c
* src/compiler/hbusage.c
* src/nortl/nortl.c
* rewritten code used to parse command line and environment parameters.
New code is covered by GPL + Harbour exception license.
All parameters are decoded by only one function and whole code is
smaller so it's much easier to modify this code.
! fixed some small bugs and incompatibilities with Cl*pper in parameter
parsing
! fixed -y undocumented (YYDEBUG) switch
- removed -x[<prefix>] set symbol init function name prefix (for .c only)
compiler command line switch
* moved -fn[:[l|u]|-] -fd[:[l|u]|-] -fp[:<char>] and -fs[-] switches
parsing to core compiler library. Now these switches are also works
with compiler library linked with HBMK2.
; TOFIX: HBMK2 ignores -fn/-fd switches and allocates temporary names
which are not compatible with names used later by harbour
compiler when above switches are activated. HBMK2 should
parse parameters and update SET FILECASE / SET DIRCASE before
it creates temporary files.
* src/rtl/mlcfunc.c
! fixed MPosToLC() results for position in last line which have to
be moved after analyzing rest of line due to word wrapping.
* src/rtl/teditor.prg
* rewritten whole internal code critical for basic functionality.
+ resolved the problem with keycode conflicts for GTs which
support extended keycodes.
+ added support missing MemoEdit() editor functionality.
; Number of bugs and mistakes was to big to try to update it.
New code is smaller and simpler. I tried to keep compatibility
with previous version and added to new version most of "helper"
methods which are not used in MemoEdit() at all anyhow I cannot
guaranty that all existing code using TEditor will work without
modifications, i.e. I had to remove :SetPos() and all logic bound
with it because it was to hard for my brain to understand this
idea and/or functionality.
If someone needs strict compatibility with previous version then
he should add to his source code copy of old code.
Current code should addressed most of MemoEdit() problems with
text formatting and editing reported in the past though probably
not all. I have no spare time for precise tests of Cl*pper's
MemoEdit().
* src/rtl/memoedit.prg
* overload :InsertState() method to show <insert> SCOREBOARD message
* changed "Abort Edit? (Y/N)" message position to be Clipper compatible
* removed redundant keycode comparison
* do not ::SetPos HBEditor method - this method has been removed
* src/rtl/mlcfunc.c
* modified unpadded MemoLine() mode to return last blank
character in the line
* src/rtl/teditor.prg
! fixed typo in MemoLine() parameters
+ added lSoftCR parameter to GetText() - when it's true returned
text contains SoftCRs
* src/rtl/memoedit.prg
! return text with SoftCRs - Cl*pper compatible
; Above modifications fix initial and result text formatting
in MemoEdit() (#33)
* include/hbznet.h
* src/rtl/hbinet.c
+ added new C function hb_znetInetTimeout()
* minor cleanup (local variables localization)
* contrib/hbssl/hbssl.hbm
* contrib/hbssl/hbssl.hbx
+ contrib/hbssl/ssl_inet.c
+ added support for SSL/TLS encryption in hb_inet*() sockets.
To enable SSL/TLS encryption on such socket it's enough to
call hb_inetSSL_connect() or hb_inetSSL_accept() passing as
1-st parameter hb_inet socket item with already established
connection and in in the 2-nd parameter SSL item. The peer
should call second function. In general hb_inetSSL_connect()
should be called by client and hb_inetSSL_accept() by server.
To use hb_inetSSL_accept() it's necessary to also set
certificated (at least self ;-)) encryption keys. See the
example I committed to test directory.
The exact syntax of new functions is:
hb_inetSSL_connect( <pSocket>, <pSSL> [, <nTimeout> ] )
hb_inetSSL_accept( <pSocket>, <pSSL> [, <nTimeout> ] )
To use hb_inet*() functions to connect with SSL/TLS server
Harbour users only have to call hb_inetSSL_connect() after
setting connection, i.e.:
IF !Empty( sock := hb_inetConnect( cServer, nPort ) )
ssl_ctx := SSL_CTX_new()
IF hb_inetSSL_connect( sock, SSL_new( ssl_ctx ) ) == 1
// SSL connection established
// now user can use all hb_inet*() functions is
// the same way as for raw TCP connections and
// all parameters like timeouts are fully supported
// but transmission is encrypted.
[...]
ENDIF
ENDIF
It's not longer necessary to use SSL_set_fd() + SSL_connect()
and then SSL_read() / SSL_write() / hb_SSL_read_line() /
hb_SSL_read_all().
BTW hb_SSL_read_line() and hb_SSL_read_all() in HBSSL library
are broken and have to be fixed.
TODO: Now HBTIP library can be nicely simplified and additional
code for SSL/TLS read/write operations removed. It's
enough to once call hb_inetSSL_connect() if SSL/TLS
encryption is needed.
+ contrib/hbssl/tests/inetssl.prg
+ added test code for hb_inet*() SSL/TLS connections.
It's client and server example which also generates self
certificated encryption keys running openssl command.
If this code is linked with non console GT then user
should generated certificates himself (see comment in
LoadCertificates() function for more information).
* src/rtl/hardcr.c
! fixed HardCR() to work with codepages using custom character encoding
in which SoftCR can be part of valid character, i.e. UTF8.
* ChangeLog.txt
* typos in prev my entry
* src/rtl/hbsocket.c
* added support MAC addreses array returned by hb_socketGetIFaces()
in BSD based systems like FreeBSD or Darwin (Mac OS X)
* src/vm/hvm.c
% small simplification i FOR EACH initial code
* contrib/hbwin/win_bmp.c
* contrib/hbwin/win_prn2.c
* use Harbour FILE IO API instead of local file access
* contrib/hbct/ctstrfil.c
* formatting
* contrib/gtqtc/gtqtc1.cpp
! fixed possible missing initialization for drawing character images
* contrib/hbwin/olecore.c
+ added new PRG function to control empty date conversion to OLE variant:
__oleVariantNullDate( [<lNewNullFlag>] ) -> <lPrevNullFlag>
This is per thread switch and by default initialized to .F. for each
new thread. When set to .T. Harbour empty dates are translated to
VT_NULL.
Warning: it's possible that this function will be removed or replaced
by other solution in the future.
* contrib/gtqtc/gtqtc1.cpp
* emulate CTRL by setting SHIFT + ALT in Android builds
(It's temporary solution - my patch with support for CTRL in
Android QT builds has been accepted so it should be included
in next Qt releases)
% set Qt::WA_NoSystemBackground
* do not change number of rows and cols in maximized and fullscreen mode
when font is changed and resize mode set to HB_GTI_RESIZEMODE_FONT.
It was creating problems when user switched to fullscreen/maximized
mode and application was not ready to dynamically update screen
dimensions.
* activate virtual keyboard on double click instead of click.
It allows to hide virtual keyboard and control program using mouse
and touch events.
* src/rtl/gtwvt/gtwvt.c
+ added support for HB_K_MENU
* src/rtl/gtxwc/gtxwc.c
* use macros instead of constant values
+ added support for HB_K_MENU
* reload font after HB_GTI_FONTSIZE (compatible with other graphic GTs)
* eliminated recursive mutex XLIB locks in HB_GTI_FONTSEL
* discard existing graphics characters and redraw console window contents
after HB_GTI_FONTATTRIBUTE
* tests/gtkeys.prg
+ added support for HB_K_MENU and HB_K_TERMINATE
* src/rtl/memoedit.prg
! fixed repeat condition for ME_INIT initial user function call
(correctly fixes#21)
* src/rtl/mlcfunc.c
* added temporary extension to MemoLine() which will be removed and
replaced in the future
* src/rtl/teditor.prg
! use temporary MemoLine() extension to fix problem with line trailing
spaces I introduced with previous modification
* src/rtl/replic.c
% optimization for Replicate( <cStr>, 1 )
* include/hbznet.h
* src/rtl/hbinet.c
* src/rtl/hbinetz.c
* moved HB_INET_ERR_* macros to header file
+ added error and errorStr functions to hb_inet*() socket read/write
wrappers
! call close function of hb_inet*() socket read/write wrappers before
closing the socket
+ added hb_znetInetFD() C function
* src/rtl/teditor.prg
! use hb_ATokens( <cText>, .T. ) and MemoLine() to divide text into lines
to improve performance and fix TABs decoding
* src/rtl/memoedit.prg
* src/rtl/teditor.prg
* applied recent fixes and cleanups from Viktor's branch.
* src/rtl/tgetlist.prg
* applied recent fixes from Viktor's branch:
; (2014-12-19 01:00 UTC+0100 Viktor Szakats)
! HBGetList():GUIApplyKey(): fixed bug introduced with UNICODE
support in 93d3a46d84 (upstream).
That patch had an undocumented workaround for the problem inside
ListBox():findText(), which was not Cl*pper compatible, so
it was later removed in 6f8508ff54a3955822b36bf4a65a2775a11bab23.
This patch hopefully fixes the root cause.
Reported here: https://groups.google.com/d/msg/harbour-devel/7Cpax5TdHnY/n5XfXX8N9vMJ
