* harbour/external/minizip/ioapi.h
! fixed FreeBSD and HAIKU builds
* harbour/src/rtl/fserr.c
* added translation for EPERM
* harbour/include/Makefile
+ harbour/include/hbapicom.h
* harbour/src/rtl/Makefile
+ harbour/src/rtl/hbcom.c
+ added Harbour multiplatform serial port C API (hb_com*() functions).
implemented code for *nixes, MS-Windows and OS2. DOS is not supported
yet. Please make test on different platforms.
; few notes about this code:
termios (*nix) based builds:
- reading LSR is not supported
- duration in break signal is fixed (at least 0.25 seconds, and not
more that 0.5 seconds)
- DTR/DSR hardware flow control is not supported
- setting error character is not supported
- discard card is supported only on few platforms
- checking input/output flow state is not supported
- if some platforms do not support some termio extensions then
compile time warnings TODO_* should be generated.
MS-Windows builds:
- discard card is not supported
OS2 builds:
- checking for input flow state is not supported
- discard card is not supported
In all builds not all RS-232 hardware flags/state are available.
OS2 build supports most of them,
This code needs to be extensively tested. I wrote it without any
serious tests. Especially OS2 builds should be verified by OS2
users. I wrote this port using only documentation which OS2 API
available in the Internet.
DOS is not supported yet though it's possible to compile termio code
for *nixes with DJGPP. Anyhow it would be very nice if we can add
our own DOS serial port code. I would like to ask if any of you
has low level serial port code in C for DOS (i.e. used with Clipper)
and can send it to us so we can use it with Harbour. I have my
own serial port library for Clipper but it's written in assembler
and it's much wider then sth what we need so it cannot be easy
adopted for Harbour.
* harbour/contrib/hbct/Makefile
+ harbour/contrib/hbct/ctcom1.c
+ harbour/contrib/hbct/ctcom.ch
+ harbour/contrib/hbct/ctcom2.c
+ added CT3 compatible COM_*() functions.
+ added CT3 compatible XMOBLOCK(), XMOCHECK(), ZEROINSERT() and
ZEROREMOVE() functions.
+ added new CT COM function:
COM_DEVNAME( <nComPort> [, <cNewName> ] ) -> <cPrevName>
which can be used to specify device name for given port in modern
systems which do not give direct hardware access for the process.
; few notes about CT3 COM_*() functions in Harbour.
In COM_OPEN() only 1-st parameter is significant, input/output buffer
sizes and trap mode parameters are ignored. In modern OS-es such
functionality is controlled by OS and usually buffered read/write
is always enabled. The sizes of IO buffers can be used only as
suggested IO buffer size for OS in some systems. It's possible that
these additional parameters will be used in DOS builds in the future.
COM_READ() does not support 2-nd parameter <lNoDelete>. It can be
implemented but because we do not have direct access to OS buffers
then we will have to emulate it ourselves what is rather inefficient.
Anyhow I can implement it if users think it's critical.
In COM_CRC() I fixed few CT3 bugs so it's not bug compatible with CT3,
i.e. it works correctly for 8 bit and smaller polynomials instead of
returning 0 or supports much larger polynomials up to 64bits.
For 16/17 bit polynomials it gives the same results as CT3 so for most
common usage it should be binary compatible with CT3.
In ZEROREMOVE() I fixed decoding some wrong CCITT strings which does
not have trailing 0 so it returns empty string "" for such corrupted
data. If someone needs original CT3 behavior for some broken code then
is can be enabled by HB_CT3_ZEROREMOVE_BUG macro.
I haven't implemented few functions.
COM_GETIO(), COM_SETIO(), COM_GETIRQ(), COM_SETIRQ() are not portable
and can be implemented only for really few platforms, i.e. for DOS
when/if we add support for serial ports to Harbour DOS builds.
Similar functionality for all other platforms gives our new function
COM_DEVNAME().
COM_KEY(), COM_SKEY() and COM_EVENT() are also not implemented.
To make them well we should add support for asynchronous events to HVM
and such extension is still unavailable. Some simulation can be
implemented using idle tasks but this can be done also by final
Harbour users so I decided to not make it.
Please test it - I've never used CT3 COM_*() API with Clipper.
* harbour/contrib/hbct/dummy.c
* removed dummy CT3 serial communication functions
; such files with dummy functions introduces very serious problems for
user code because they do not respect original module granularity
effectively breaking overloading only chosen functions so it breaks
also some real Clipper code.
* src/rtl/fstemp.c
! Using hb_fsTempDir() in HB_FTEMPCREATEEX() instead of
old solution. This should fix it for some non-*nix
platforms where *nix specific TEMPDIR envvar was used
to determine temp directory.
* contrib/hbwin/Makefile
* include/Makefile
* src/rtl/Makefile
- contrib/hbwin/hbdyn.ch
+ include/hbdyn.ch
- contrib/hbwin/hbdyn.c
+ src/rtl/hbdyn.c
- contrib/hbwin/win_dllc.c
+ src/rtl/hbdynhb.c
- contrib/hbwin/tests/testdll.c
+ tests/testdyn.c
- contrib/hbwin/tests/testdll.prg
+ tests/testdyn.prg
- contrib/hbwin/tests/testdll1.prg
+ tests/testdyn1.prg
- contrib/hbwin/hbdyn.h
* include/hbapi.h
* Moved dynamic library call related functions to
core (RTL).
* Windows specific test code (currently all) guarded
for platform.
* Changed default calling convention to cdecl.
Tests adaptd accordingly.
* Terminology change: 'dll' -> 'dynamic library'
; HB_DYNCALL() is now part of core Harbour, and it's
platform independent. It's platform (ABI) dependent though,
and currently x64 and x86/stdcall/syscall/cdecl
is supported and these were tested (except OS/2 syscall).
* contrib/hbwin/hbwin.h
* contrib/hbwin/win_misc.c
* contrib/hbwin/legacycd.c
* Low level hbwin_getprocaddress() function moved
to legacy file and made static.
* contrib/xpp/Makefile
* contrib/xpp/dllx.c
* contrib/xpp/xpp.hbc
+ Enabled DLL*() functions for all platforms.
- Deleted dependence on hbwin library.
* contrib/xpp/tests/testdll.prg
* Windows specific parts (currently the whole test) guarded
for platform.
* contrib/hbct/Makefile
- contrib/hbct/diskhb.prg
* contrib/hbct/disk.c
* contrib/xhb/Makefile
+ contrib/xhb/diskhb.prg
* GETVOLINFO() moved from hbct to xhb.
* ChangeLog
* Marked some TODO/TOFIX items as DONE.
* contrib/hbct/Makefile
+ contrib/hbct/diskhb.prg
- contrib/hbct/diskhb.c
+ GETVOLINFO() rewritten in pure .prg code. It means it will
work on all OSes which we have core support for.
This currently means dos and win. OS/2 and other systems
still have this as TODO. Anyone to add them?
* src/vm/set.c
! ULONG -> HB_FATTR. Missed this occurrence of this ULONG
in previous global modification pass.
Error reported by Istvan Bisz.
* contrib/hbct/Makefile
* contrib/hbct/disk.c
+ contrib/hbct/diskhb.c
! Cleaned the way Windows headers are included.
* Cleaned TRUENAME(), GETVOLINFO() and VOLSERIAL().
+ Using new UNICODE macros in TRUENAME(), GETVOLINFO() and VOLSERIAL().
! GETVOLINFO(), which is not a CT function, got moved
to a separate source file to avoid name collisions.
; TOFIX: It should be moved to xhb lib eventually.
* contrib/hbct/ctnet.c
* Cleaned NETREDIR() and NETRMTNAME() functions.
+ Reworked NETREDIR() and NETRMTNAME() functions to use new UNICODE macros.
+ Extended return buffer in network functions to 128 (from 80).
+ NETRMTNAME() got support to return embedded zeros in name string.
+ Documented a hidden xhb extension in NETREDIR().
% hb_WNetErrorHandler() static function merged into NETREDIR().
; TOFIX: Above hidden extension in NETREDIR() very much looks like
a debugging feature, so I left a TOFIX to convert it to
HB_TRACE() call.
; Please test them.
* contrib/hbsqlit3/hbsqlit3.c
* contrib/hbmisc/dates2.c
- Deleted two functions which were recently made static,
and it turned out they're not even used by Harbour.
Warning reported by Istvan Bisz.
* src/vm/hashfunc.c
* src/vm/asort.c
* src/rtl/cdpapi.c
* contrib/xhb/xhbat.c
* contrib/xhb/txtline.c
* LONG -> HB_ISIZ
* contrib/xhb/bkgtsks.c
* SHORT -> int
* contrib/xhb/hbcomprs.c
* contrib/xhb/xhberrc.c
* LONG -> long
* harbour/config/lib.mk
* harbour/config/bin.mk
* harbour/config/header.mk
* harbour/config/dyn.mk
* harbour/config/doc.mk
* harbour/config/instsh.mk
! rewritten install rules so now they work without any problem when
more then one target .mk file is included, i.e. lib.mk and header.mk
* harbour/source/pp/Makefile
* harbour/source/dynlib/mt/Makefile
* harbour/source/dynlib/Makefile
* harbour/contrib/hbmysql/Makefile
* harbour/contrib/hbct/Makefile
* harbour/contrib/xhb/Makefile
* harbour/contrib/hbodbc/Makefile
* harbour/contrib/hbtpathy/Makefile
* harbour/contrib/hbsqlit3/Makefile
* harbour/contrib/hbmzip/Makefile
* harbour/contrib/hbblat/Makefile
* harbour/contrib/hbqt/Makefile
* harbour/contrib/hbxbp/Makefile
* harbour/contrib/xpp/Makefile
* harbour/contrib/hbnf/Makefile
* harbour/contrib/hbcurl/Makefile
* harbour/contrib/gtqtc/Makefile
* harbour/contrib/rddsql/sddmy/Makefile
* harbour/contrib/rddsql/sddpg/Makefile
* harbour/contrib/rddsql/sddfb/Makefile
* harbour/contrib/rddsql/sddodbc/Makefile
* harbour/contrib/hbhpdf/Makefile
* harbour/contrib/rddado/Makefile
* harbour/contrib/gtwvg/Makefile
* harbour/contrib/hbpgsql/Makefile
* harbour/contrib/hbclipsm/Makefile
* harbour/contrib/rddads/Makefile
* harbour/contrib/hbfimage/Makefile
* harbour/contrib/hbgd/Makefile
* harbour/contrib/hbtip/Makefile
* harbour/contrib/hbwin/Makefile
* harbour/contrib/hbvpdf/Makefile
* harbour/contrib/hbbtree/Makefile
* harbour/contrib/hbssl/Makefile
* harbour/external/libhpdf/Makefile
* removed not longer necessary workaround for overwritten by different
targets INSTALL_RULE
Possible TODO: clean up some other rules in config .mk files to remove
hacks from pp and dynlib Makefile(s).
Above modifications should fully resolve the problems with repeated
install actions and also build problems with some more restrictive
POSIX SHELLs.
* INSTALL
+ Added information about creating Windows / Windows CE
builds on Linux. Corresponding scripts references.
! Minor correction to OS/2 on Windows cross-build example.
* contrib/hbct/Makefile
- contrib/hbct/blank.prg
+ contrib/hbct/blank.c
+ Applied patch by Pavel Tsarenko (xhb) (with some little modifications):
BLANK() function rewritten in C.
* contrib/rddads/adsfunc.c
! Reimplemented fix from Pavel Tsarenko (xhb):
Removed unnecessary OEM to ANSI convertation in SQL functions.
* contrib/hbct/Makefile
+ contrib/hbct/dattime4.c
* contrib/hbct/datetime.c
* Moved STOD() into separate file to avoid linking problems
when HB_COMPAT_XPP is defined.
! Removed HB_COMPAT_XPP protection. No longer needed.
! Restored my copyright for STOD().
* Updated STOD() content with core code.
; TOFIX: ? Probably it would be best to remove this function
from here, otherwise it may just create syncing
problems. Also from xpp lib. Opinions?
* contrib/xpp/xpp.ch
+ Now defining HB_COMPAT_XPP. This can be helpful to enable
some extra XPP feature in our core headers. (unless we find
a better solution for this)
+ Added NOTE to include this header before Harbour ones.
* contrib/gtwvg/make_b32.bat
* contrib/gtwvg/make_vc.bat
* contrib/gtwvg/Makefile
* Trying new method to point to hbwin, so that
we're not relying on hbwin headers being installed.
; Please test.
* contrib/Makefile
+ Added hbblat.
* contrib/make_vc_all.bat
* contrib/make_b32_all.bat
* contrib/make_gcc_all.sh
* contrib/hbblat/Makefile
* contrib/hbblat/common.mak
* contrib/hbblat/make_b32.bat
* contrib/hbblat/make_vc.bat
* contrib/hbblat/blatwrp.c
* contrib/hbblat/tests/hbmk.bat
* contrib/hbblat/tests/blatcmd.prg
+ Added support for HB_INC_BLAT (needed for releases).
* Some EOLs added.
* Minor correction to .ch name in make files.
% Replaced command line retrieval with hb_cmdline() call.
* Cleaned some headers/#defines.
* GNU make file got protection to only compile for win,
and to install headers.
* make_gnu.bat
* contrib/hbct/Makefile
* contrib/hbwin/Makefile
* Minor formatting.
* contrib/gtwvg/Makefile
* contrib/hbapollo/Makefile
* contrib/hbbtree/Makefile
* contrib/hbclipsm/Makefile
* contrib/hbct/Makefile
* contrib/hbfbird/Makefile
* contrib/hbfimage/Makefile
* contrib/hbgd/Makefile
* contrib/hbhpdf/Makefile
* contrib/hbmisc/Makefile
* contrib/hbmsql/Makefile
* contrib/hbmysql/Makefile
* contrib/hbmzip/Makefile
* contrib/hbnf/Makefile
* contrib/hbodbc/Makefile
* contrib/hbpgsql/Makefile
* contrib/hbsqlit2/Makefile
* contrib/hbsqlit3/Makefile
* contrib/hbtip/Makefile
* contrib/hbtpathy/Makefile
* contrib/hbvpdf/Makefile
* contrib/hbw32/Makefile
* contrib/hbw32ddr/Makefile
* contrib/hbwhat32/Makefile
* contrib/rddado/Makefile
* contrib/rddads/Makefile
! CFLAGS -> C_USR
* var = var + x -> var += x
! Added header install rules for all places where such
headers are defined. I wonder why isn't this the default
in our GNU-make system.
* few other minor cleanups.
* contrib/rddads/Makefile
* Experimenting with HB_INC_ADS implementation in GNU-make system.
HB_INC_ADS can now used to enable to rddads builds.
In GNU-make HB_INC_ADS can contain a list of possible places
where headers may be found. GNU-make will validate these and
if the headers were found in any of these places, rddads will
be built. For Linux there are some default dirs which will
always be checked.
'HB_WITHOUT_ADS' and 'ACE_DIRS' is not longer used.
; Please test. If this works out okay, we can use this method
for the rest of 3rd party dependent contribs.
* contrib/rddads/Makefile
% Don't define WIN32 in GNU-makefiles for w32.
* contrib/hbmisc/Makefile
! Don't include non-existing 'test' dir in make.
* contrib/gtwvg/Makefile
* contrib/gtwvg/common.mak
! Not installing private .h file to common include dir.
* contrib/hbw32ddr/w32_ddrw.cpp
! Fixed one GCC warning. (Some remain)
* harbour/source/vm/estack.c
* added missing static to s_initSymbol declaration
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/scroll.c
* formatting
* harbour/common.mak
* added empty line necessary for some make systems (f.e. wmake)
* harbour/bin/hb-func.sh
* changed system libs order to avoid problems on some platforms
* harbour/bin/pack_src.sh
* collect information about repository files using 'svn status -v'
command instead of scanning .svn/entries files to avoid problems
with different formats used by SVN
* harbour/include/hbchksum.h
* harbour/include/hbset.h
! added missing extern in few function prototypes
* harbour/include/hbclass.ch
* use HB_CLS_PARAM_LIST macro instead of ... for strict C52 mode
* harbour/source/common/hbfsapi.c
+ added missing const to one declaration
* harbour/source/common/hbstr.c
* minor cleanup in hb_stricmp()
* harbour/source/rtl/inkey.c
! casting to avoid negative values during char to int translation
* harbour/source/rtl/mouse53.c
* added one internal definition
* harbour/source/rtl/philes.c
* removed unnecessary #include(s)
* added missing const to one declaration
* harbour/source/rtl/valtype.c
* harbour/source/vm/hashfunc.c
* cleanup RT error call to eliminate hb_paramError() function
* harbour/source/pp/pplib.c
* harbour/source/vm/runner.c
* harbour/source/vm/debug.c
* harbour/source/vm/arrayshb.c
* harbour/source/vm/classes.c
* harbour/source/vm/hvm.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtfunc.c
* harbour/source/rtl/hbinet.c
* harbour/source/rtl/hbregex.c
* harbour/source/rtl/idle.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/hbtoken.c
* harbour/source/rtl/direct.c
* harbour/source/rdd/dbcmd.c
* harbour/source/rdd/dbcmd53.c
* harbour/source/rdd/fieldhb.c
* harbour/source/rdd/hbsix/sxcompr.c
* harbour/source/rdd/hbsix/sxcrypt.c
* harbour/source/compiler/hbcmplib.c
* harbour/contrib/hbrddads/adsfunc.c
* harbour/contrib/hbrddads/adsmgmnt.c
- removed unnecessary calls to hb_ret()
% replaced hb_itemRelease( hb_itemReturn( pItem ) ) with
hb_itemReturnRelease( pItem )
% replaced hb_itemPut*( hb_arrayGetItemPtr( pArray, ... ), ... ) with
hb_arraySetNI( pArray, ... )
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/contrib/xhb/cstructc.c
* harbour/contrib/hbw32/w32_ole.c
* harbour/contrib/hbgtwvg/wvtcore.c
* cleaned typos with double ;;
* harbour/source/vm/extend.c
* harbour/source/rtl/math.c
* cleaned HB_EXPORT usage
* harbour/source/pp/ppcore.c
! fixed Harbour extension which allows to use match marker
at the beginning of rule definition
* harbour/source/main/harbour.c
! fixed hex conversion in FM log module - fix done by Phil Krylov
in xHarbour
* harbour/source/rdd/nulsys/nulsys.c
+ added dummy version of DBEVAL() and DBFILTER() - these functions
are used in RTL
* harbour/contrib/hbct/bitnum.c
+ added INTNEG(), INTPOS()
+ harbour/contrib/hbct/ctrand.prg
+ added RANDOM(), RAND() - borrowd from xHarbour by Pavel Tsarenko
+ harbour/contrib/hbct/setrc.c
+ added SETRC()
* harbour/contrib/hbct/getinput.prg
% minor optimization
* harbour/contrib/hbct/Makefile
* harbour/contrib/hbct/common.mak
* updated for new files
* harbour/contrib/hbnf/tempfile.prg
* use HB_FTempCreate() - modification borrowed from xHarbour
TOFIX this function uses hb_isbyref() which does not exist
in Harbour
* harbour/config/w32/msvc.cf
+ added -nologo flag for cl.exe (Phil Krylov's modification borrowed
from xHarbour
* harbour/config/w32/mingw32.cf
- removed repeated definitions
* harbour/config/w32/install.cf
! added alternative install rule for command.com with max line size limit
