* include/hbdefs.h
! Fixed one intentional typo I put in to test legacy types.
* src/compiler/hbmain.c
* src/compiler/genhrb.c
* src/compiler/gencc.c
* src/compiler/hbcmplib.c
* include/hbcomp.h
* include/hbcompdf.h
* HB_ULONG -> HB_SIZE, where I could find out from warnings.
+ Added parameter names to some function declarations where they
were missing.
; Przemek, please check me. I feel I will mess this up if continuing
beyond this point, so I'd appreciate if you could take a look at
HB_ULONG to HB_SIZE conversion from an intrinsic perspective,
there seem to be places where it needs further tweaks to get us
full Win64 support. [ I've also intentionally left this area
more or less intact when doing the previous pass of conversion. ]
; There are places where simple 'int' is used, while it should be
HB_SIZE (or maybe size_t? in some places).
; Also, Win64 conversion will need some more work f.e. in filesys.c
where WinAPI file I/O functions can't accept a 64-bit value.
First I will report these and if they seem complicated I'll
revert to HB_SIZE = HB_ULONG for Win64 in the being.
* src/compiler/hbgenerr.c
* Formatting.
* src/pp/ppcore.c
* src/vm/strapi.c
* src/vm/debug.c
* src/vm/itemapi.c
* src/vm/cmdarg.c
* src/vm/set.c
* src/debug/dbgentry.c
* src/common/hbgete.c
* src/common/hbstr.c
* src/common/strwild.c
* src/nortl/nortl.c
* src/rtl/lennum.c
* src/rtl/strmatch.c
* src/rtl/gtstd/gtstd.c
* src/rtl/hbstrfmt.c
* src/rtl/transfrm.c
* src/rtl/gtcgi/gtcgi.c
* src/rtl/direct.c
* src/rtl/filesys.c
* src/rtl/console.c
* src/rtl/hbgtcore.c
* src/rtl/cdpapi.c
* src/rtl/mlcfunc.c
* src/rtl/itemseri.c
* src/rtl/gtpca/gtpca.c
* src/rtl/trace.c
* src/rtl/samples.c
* src/rtl/gete.c
* src/rdd/workarea.c
* src/rdd/hsx/hsx.c
* src/rdd/hbsix/sxsem.c
* src/rdd/hbsix/sxfname.c
* contrib/hbct/tab.c
* contrib/xhb/dbf2txt.c
* contrib/xhb/datesxhb.c
* contrib/xhb/dbgfxc.c
* contrib/hbmzip/hbmzip.c
* contrib/hbnf/fttext.c
* contrib/hbnetio/netiocli.c
* contrib/hbpgsql/postgres.c
* contrib/hbclipsm/num.c
* contrib/rddads/ads1.c
* contrib/sddsqlt3/sddsqlt3.c
* contrib/hbfimage/fi_wrp.c
* contrib/sddodbc/sddodbc.c
* contrib/sddoci/sddoci.c
* contrib/hbwin/win_svc.c
* contrib/hbwin/win_prn2.c
* '( HB_SIZE ) strlen(' -> 'strlen('
+ contrib/hbblat/hbblat.hbp
+ contrib/hbqt/gtqtc/gtqtc.hbp
+ contrib/hbqt/gtqtc/gtqtcs.hbp
+ contrib/hbblink/hbblink.hbp
+ contrib/hbnf/hbnf.hbp
+ contrib/hbmemio/hbmemio.hbp
+ contrib/hbfship/hbfship.hbp
+ contrib/hbnetio/hbnetio.hbp
+ contrib/gtwvg/gtwvg.hbp
+ contrib/hbmisc/hbmisc.hbp
+ contrib/hbbtree/hbbtree.hbp
+ Added hbmk2 make files.
; NOTE: I intend to move hbbtree to the examples section.
It has unfixed portability problems since long time.
* contrib/hbqt/hbqt_common.hbm
* contrib/hbqt/detect.mk
! Fixed key header name after last changes.
* contrib/hbqt/hbqts.hbp
* contrib/hbqt/hbqtguis.hbp
* contrib/hbqt/hbqtcores.hbp
* contrib/hbqt/hbqtnetworks.hbp
+ Skipping build if HB_QT_STATIC is not set.
* harbour/include/hbapi.h
* harbour/src/vm/hashes.c
* harbour/src/vm/hashfunc.c
+ added support for keeping strict assign order in hash arrays. It's
enabled optionally by setting HB_HASH_KEEPORDER hash array flag.
It gives the same functionality as associative arrays in xHarbour
(enabled by HSETAACOMPATIBILITY()) but this implementation is
internally completely different. It does not introduce linear
scan in add operation so enabling it should not reduce the
performance in this operation. It can even improve it on some
hardware reducing number of memory bytes which have to be moved.
Only delete operation will force linear index scan. The most
important in this implementation is that it does not need any
additional functions like HAA*() in xHarbour. Just simply all
existing functions operating on position indexes like HB_HPOS(),
HB_HKEYAT(), HB_HVALUEAT(), HB_HPAIRAT(), HB_HDELAT(), HB_HSCAN()
use as index natural order in which items were added to hash array.
Also HB_HKEYS(), HB_HVALUES() and FOR EACH iterations respect it.
+ added new PRG functions
HB_HKEEPORDER( <hValue> [, <lNewSetting> ] ) -> <lPrevSetting>
HB_HSETORDER( <hValue> [, <lNewSetting> ] ) -> <hValue>
which cam be used to enable/disable strict order in hash array.
Enabling strict order for non empty hash arrays accept the order
created after sorting existing item not the original assign order.
Disabling strict order for non empty hash arrays may change the
items order.
; TODO: add translation for xHarbour's HAA*() functions to hbcompat.ch
and/or xhb library.
* harbour/contrib/hbnetio/netiocli.c
* harbour/contrib/hbnetio/netiosrv.c
% reenabled TCP_NODELAY on client and server side
I had to be really tired when I was making tests and I mixed
hb_socketSetNoDelay() with hb_socketSetBlockingIO().
Thanks to Aleksander Czajczynski who noticed the delay in his
tests.
* harbour/contrib/hbwin/olecore.c
* minor cleanup
* harbour/src/vm/hashes.c
* do not clone preallocated unused area
* harbour/contrib/hbnetio/netiocli.c
* disabled RT errors inside NETIO_CONNECT() and NETIO_GETCONNECTION()
when wrong password or NETIO server is used but return .F.
* harbour/contrib/hbnetio/netiocli.c
* harbour/contrib/hbnetio/readme.txt
+ added new client side function:
NETIO_GETCONNECTION( [<cServer>], [<nPort>], [<nTimeOut>], ;
[<cPasswd>], [<nCompressionLevel>], [<nStrategy>] )
-> <pConnection> | NIL
I returns pointer item with HBNTIO connection. It can be used to
speedup RPC calls and stream functions when <pConnection> is
passed as parameter to these functions.
+ modified NETIO_PROCEXISTS(), NETIO_PROCEXEC(), NETIO_PROCEXECW(),
NETIO_FUNCEXEC(), NETIO_OPENDATASTREAM(), NETIO_OPENITEMSTREAM()
client side functions to accept as optional 1-st parameter
connection pointer returned by NETIO_GETCONNECTION()
+ modified NETIO_CLOSESTREAM() and NETIO_GETDATA() client side
functions to accept as optional 2-nd parameter connection pointer
returned by NETIO_GETCONNECTION()
* harbour/contrib/hbnetio/netiosrv.c
! fixed yet another typo located by Aleksander Czajczyki which
caused internal error (hb_xfree() with NULL pointer)
* harbour/contrib/hbnetio/netiosrv.c
! fixed typo in NETIO_SRVSTATUS() - -2 was always returned
(modification committed by mistake in my previous commit)
! fixed to return .F. by NETIO_SRVSEND{DATA,IETM}() if hb_znetFlush()
reports error.
Many thanks for Aleksander Czajczyński for information about problems
and his extensive tests.
* harbour/external/minizip/ioapi.h
! fixed FreeBSD and HAIKU builds
* harbour/src/rtl/fserr.c
* added translation for EPERM
* harbour/include/Makefile
+ harbour/include/hbapicom.h
* harbour/src/rtl/Makefile
+ harbour/src/rtl/hbcom.c
+ added Harbour multiplatform serial port C API (hb_com*() functions).
implemented code for *nixes, MS-Windows and OS2. DOS is not supported
yet. Please make test on different platforms.
; few notes about this code:
termios (*nix) based builds:
- reading LSR is not supported
- duration in break signal is fixed (at least 0.25 seconds, and not
more that 0.5 seconds)
- DTR/DSR hardware flow control is not supported
- setting error character is not supported
- discard card is supported only on few platforms
- checking input/output flow state is not supported
- if some platforms do not support some termio extensions then
compile time warnings TODO_* should be generated.
MS-Windows builds:
- discard card is not supported
OS2 builds:
- checking for input flow state is not supported
- discard card is not supported
In all builds not all RS-232 hardware flags/state are available.
OS2 build supports most of them,
This code needs to be extensively tested. I wrote it without any
serious tests. Especially OS2 builds should be verified by OS2
users. I wrote this port using only documentation which OS2 API
available in the Internet.
DOS is not supported yet though it's possible to compile termio code
for *nixes with DJGPP. Anyhow it would be very nice if we can add
our own DOS serial port code. I would like to ask if any of you
has low level serial port code in C for DOS (i.e. used with Clipper)
and can send it to us so we can use it with Harbour. I have my
own serial port library for Clipper but it's written in assembler
and it's much wider then sth what we need so it cannot be easy
adopted for Harbour.
* harbour/contrib/hbct/Makefile
+ harbour/contrib/hbct/ctcom1.c
+ harbour/contrib/hbct/ctcom.ch
+ harbour/contrib/hbct/ctcom2.c
+ added CT3 compatible COM_*() functions.
+ added CT3 compatible XMOBLOCK(), XMOCHECK(), ZEROINSERT() and
ZEROREMOVE() functions.
+ added new CT COM function:
COM_DEVNAME( <nComPort> [, <cNewName> ] ) -> <cPrevName>
which can be used to specify device name for given port in modern
systems which do not give direct hardware access for the process.
; few notes about CT3 COM_*() functions in Harbour.
In COM_OPEN() only 1-st parameter is significant, input/output buffer
sizes and trap mode parameters are ignored. In modern OS-es such
functionality is controlled by OS and usually buffered read/write
is always enabled. The sizes of IO buffers can be used only as
suggested IO buffer size for OS in some systems. It's possible that
these additional parameters will be used in DOS builds in the future.
COM_READ() does not support 2-nd parameter <lNoDelete>. It can be
implemented but because we do not have direct access to OS buffers
then we will have to emulate it ourselves what is rather inefficient.
Anyhow I can implement it if users think it's critical.
In COM_CRC() I fixed few CT3 bugs so it's not bug compatible with CT3,
i.e. it works correctly for 8 bit and smaller polynomials instead of
returning 0 or supports much larger polynomials up to 64bits.
For 16/17 bit polynomials it gives the same results as CT3 so for most
common usage it should be binary compatible with CT3.
In ZEROREMOVE() I fixed decoding some wrong CCITT strings which does
not have trailing 0 so it returns empty string "" for such corrupted
data. If someone needs original CT3 behavior for some broken code then
is can be enabled by HB_CT3_ZEROREMOVE_BUG macro.
I haven't implemented few functions.
COM_GETIO(), COM_SETIO(), COM_GETIRQ(), COM_SETIRQ() are not portable
and can be implemented only for really few platforms, i.e. for DOS
when/if we add support for serial ports to Harbour DOS builds.
Similar functionality for all other platforms gives our new function
COM_DEVNAME().
COM_KEY(), COM_SKEY() and COM_EVENT() are also not implemented.
To make them well we should add support for asynchronous events to HVM
and such extension is still unavailable. Some simulation can be
implemented using idle tasks but this can be done also by final
Harbour users so I decided to not make it.
Please test it - I've never used CT3 COM_*() API with Clipper.
* harbour/contrib/hbct/dummy.c
* removed dummy CT3 serial communication functions
; such files with dummy functions introduces very serious problems for
user code because they do not respect original module granularity
effectively breaking overloading only chosen functions so it breaks
also some real Clipper code.
* harbour/src/rtl/hbznet.c
! fixed stupid typo which caused that hb_znetFlush() in encrypted
buffers never returned 0 (the returned value was increased by 4)
* harbour/contrib/hbnetio/netio.h
* harbour/contrib/hbnetio/netiocli.c
* harbour/contrib/hbnetio/netiosrv.c
* harbour/contrib/hbnetio/readme.txt
+ added support for communication streams/channels which allow to
send asynchronously data from server to client.
The following client side functions had been added:
NETIO_OPENDATASTREAM( <cStreamFuncName> [, <params,...>] )
-> <nStreamID>
NETIO_OPENITEMSTREAM( <cStreamFuncName> [, <params,...>] )
-> <nStreamID>
NETIO_CLOSESTREAM( <nStreamID>, [<cServer>], [<nPort>] )
-> <lOK>
NETIO_GETDATA( <nStreamID>, [<cServer>], [<nPort>] )
-> <aData> | <cData> | NIL
The following server side functions had been added:
NETIO_SRVSTATUS( <pConnectionSocket> [, <nStreamID>] )
-> <nStatus>
NETIO_SRVSENDITEM( <pConnectionSocket>, <nStreamID>, <xData> )
-> <lSent>
NETIO_SRVSENDDATA( <pConnectionSocket>, <nStreamID>, <cData> )
-> <lSent>
+ added RT errors to the netio client code. They should help to early
detect any communication problems
! disabled hb_socketSetNoDelay() in client and server code.
I enabled it for some local tests and by mistake committed to SVN
and I didn't noticed it. It could cause serious problems in some cases
i.e. with slow WiFi or WAN connections.
Warning: server signature changed due to extensions in protocol.
both client and server side has to be updated and use
current SVN code.
+ harbour/contrib/hbnetio/tests/netiot03.prg
+ added demonstration/test code for alternative RDD IO API, RPC and
asynchronous data streams in HBNETIO
* src/rtl/achoice.prg
! REVERTED: Fixed typo in ACHOICE() K_UP handling, which caused a
bogus line to appear below the bottom when the height of the
achoice area was only one line. Pls verify me for regressions.
[ It did cause regression. So now the original bug is present
again. ]
TOFIX: ---
#include "inkey.ch"
CLS
hb_keyPut( K_DOWN )
hb_keyPut( K_UP ) /* bogus '2' appears out of the area here. */
AChoice( 0, 0, 0, 0, { "1", "2" } )
---
* include/hbdefs.h
+ Added more info on HB_SIZE/HB_ISIZ future plans.
* contrib/hbmemio/memio.c
* contrib/hbnetio/netiocli.c
- Deleted ( HB_SIZE ) casts in more obscure places.
* utils/hbmk2/hbmk2.prg
+ -hbnolib option is now automatically enabled in -hbdyn mode.
To disable it anyway, -hbnolib- option can be used.
* harbour/include/hbapifs.h
* harbour/src/rtl/filebuf.c
* harbour/contrib/hbmemio/memio.c
* harbour/contrib/hbnetio/netiocli.c
+ added new method:
void Flush( PHB_FILE pFile, HB_BOOL fDirty );
to replaceable RDD IO structure (HB_FILE)
+ added new function:
void hb_fileFlush( PHB_FILE pFile, HB_BOOL fDirty );
* harbour/src/rdd/dbfntx/dbfntx1.c
* harbour/src/rdd/dbfnsx/dbfnsx1.c
* harbour/src/rdd/dbfcdx/dbfcdx1.c
* harbour/src/rdd/dbffpt/dbffpt1.c
* use hb_fileFlush()
* harbour/src/vm/hvm.c
* harbour/include/hbxvm.h
! fixed hb_xvm{Local,Static,Module}Name() to use 'const char *'
instead of 'char *' - modifications by Xavi (jarabal)
* harbour/include/hbapi.h
* harbour/include/hbxvm.h
* harbour/include/hbmacro.h
* harbour/include/hbcompdf.h
* harbour/src/vm/hvm.c
* harbour/src/vm/macro.c
* harbour/src/vm/memvars.c
* replaced some 'BYTE' types with 'unsigned char' or 'int' types
* cleanup some other casting and types to reduce conversions
between function calls
* harbour/src/common/expropt1.c
; updated comments
* harbour/include/hbpp.h
* harbour/include/hbexprop.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* eliminated HB_EXPR_PCODE?() macros
! fixed potential GPF trap during compilation of _GET_() functions
which can be exploited by strange code using some special expressions
as get variable.
TODO: eliminate hb_compExprClone() used in hb_compExprSetGetBlock(),
our optimization module does not care about shared expressions
so it can be source of serious problems in the future if someone
use this functions for non optimized expression which will be
reduced later.
* emulate clipper behavior for codeblock optimizations and do
not optimize all codeblocks if -kc switch is used and codeblocks
is inside non optimized part of code like (Clipper has such
places)
% simplified and optimized some functions like hb_compExprReduceList()
* src/rtl/fstemp.c
* include/hbapifs.h
* include/hbextern.ch
+ Added HB_DIRTEMP() .prg level function. Returns name of temp dir,
with closing backslash.
+ Added hb_fsTempDir() .c level function.
; Please review, especially MS-DOS, OS/2, which I won't be able
to test.
* src/rtl/fstemp.c
* Cleanup: Deleted hb_fsCreateTempLow(), made layout more clear.
; TOFIX: For some builds, MS-DOS, OS/2 and WIN without WIN IO
the temp directory will be wrongly calculated by checking
TMPDIR envvar. Such envvar seems *nix specific.
If new hb_fsTempDir() will be tested, above can be fixed
by using this new function.
* package/winuni/RELNOTES
+ Noted update to Firebird 2.5.0rc1
* contrib/hbpgsql/postgres.c
+ Marked recently deprecated function as HB_LEGACY_LEVEL3.
* contrib/hbfbird/firebird.c
* Cleanup for a macro.
* contrib/hbnetio/utils/netiosrv.prg
+ Using HB_HRB_BIND_FORCELOCAL when loading .hrb.
* contrib/hbnetio/utils/modules/test.prg
+ Marked function as STATIC.
* ChangeLog
* Old TODO marked DONE.
* utils/hbmk2/hbmk2.prg
+ -xhp= converter switch now recognizes some more types of file.
(lib, object and libpaths)
* contrib/hbnetio/utils/netiosrv.prg
* contrib/hbnetio/utils/netiocmd.prg
- Deleted call protection.
* contrib/hbnetio/utils/netiocmd.prg
! Fixed remote execution protection to work even when
the source was compiled from another directory.
; QUESTION: Is there a better way to make this kind of
protection? Current system will break if
the source filename of the caller happens to
change in the future.
* contrib/hbnetio/utils/netiosrv.prg
+ Show internal error and quit and if above self-protection
got broken for some reason.
* utils/hbmk2/hbmk2.prg
! Fixed entry function detection builting project in
different than current dir, possibly also in -inc mode.
[TOMERGE 2.0]
* contrib/hbnetio/utils/netiosrv.prg
* contrib/hbnetio/utils/netiocmd.prg
% Optimizations to latest patch (using FOR EACH).
* Formatting and indenting to latest patch.
* contrib/hbnetio/utils/netiosrv.hbp
* contrib/hbnetio/utils/netiosrv.prg
+ contrib/hbnetio/utils/netiocmd.prg
+ Applied patch sent by Vailton Renato.
* Some formatting applied to it.
* harbour/src/vm/strapi.c
* allow to pass NULL as item pointer in hb_item{Get,Copy}Str*() functions
* updated hb_itemCopyStr*() functions to set '\0' in the buffer if not
string item is passed as parameter
* updated hb_itemCopyStr to return number of characters which could be
stored in buffer if buffer when passed buffer is NULL and its size is 0
Now all hb_itemCopyStr*() functions can be used to retirve the size in
character of destination string by:
ulSize = hb_itemCopyStr*( pItem ..., NULL, 0 )
* harbour/contrib/hbnetio/netiocli.c
* simplified the code by removing one unnecessary protection
* harbour/contrib/xhb/xhw32prn.prg
! fixed stupid typo in method redirecting:
:StartPage() was redirected to :Create() and :Create() was
redirected to :StartPage()
* harbour/contrib/hbct/video.c
! fixed compilation for compilers using 'char' as unsigned type
* harbour/contrib/hbmzip/hbmzip.c
! fixed to work with HB_FATTR
* harbour/contrib/hbnetio/netiocli.c
* pacified BCC warning
* harbour/contrib/hbnetio/netiocli.c
* harbour/contrib/hbnetio/readme.txt
+ added new client side function:
NETIO_DECODE( [@]<cFullName>, [@<cServer>], [@<nPort>], [@<nTimeOut>], ;
[@<cPasswd>], [@<nCompressionLevel>], [@<nStrategy>] )
-> <lDecoded>
Decode connection parameters from <cFullName> and default settings.
Return .T. if <cFullName> contains any connection settings.
<cFullName> should not contain "net:" prefix.
* harbour/src/rtl/itemseri.c
+ added support for hash array flags and default value serialization
Warning: before this modification hash arrays were always restored
with binary sorting with default auto assign setting and
without any default value and resorted if necessary. Now
only non binary hash arrays are resorted what may cause
problems for hash arrays not using binary sorting serialized
by old code and restored by the current one. In such case
it's necessary to restore original flags manually using
hb_h*() functions to force resorting.
- removed my TODO note:
"extended hash format with default value and hash flags"
* contrib/hbnetio/tests/netiotst.prg
! Fixed to REQUEST dir related functions to avoid RTE.
- contrib/hbnetio/tests/data
- Deleted. Now it's created by RPC call.
* contrib/hbwin/tests/testprn.prg
* Formatting.
* contrib/hbwin/win_prn1.c
! Using constants for dmOrientation.
* harbour/contrib/hbnetio/netiosrv.c
! fixed c&p typo - it should fix problem reported by Viktor in netiostv
* harbour/contrib/hbwin/win_prn1.c
* casting
* harbour/src/vm/hashes.c
! fixed missing HB_STACK_TLS_PRELOAD - thanks to Xavi
* harbour/contrib/hbnetio/netiosrv.c
! fixed wrong declaration and casting of rpcFilter - thanks to Xavi
+ harbour/contrib/hbnetio/readme.txt
+ added small description of NETIO functions - now only client parts
* harbour/contrib/hbwin/win_tprn.prg
* updated class name in comments
* harbour/contrib/hbwin/win_prn1.c
* minor formatting
* harbour/contrib/hbwin/win_prn3.c
% removed unnecessary rest of buffer clearing in hb_tstrncat()
* src/rtl/tget.prg
! Fixed cursor positioning bug, when @S picture length is
higher than actual edit buffer length.
Thanks to Stupar for report.
[TOMERGE 2.0]
* contrib/hbnetio/utils/netiosrv.prg
* Minor.
* src/rtl/Makefile
+ src/rtl/strclear.c
* include/hbextern.ch
+ Added HB_STRCLEAR() function to safely clear the content
of a string variable.
Notice that this method by itself can only work if the
string variable has no other references, and generally
you have to code carefully to avoid creating unwanted
copies of the string when passing it around in an app.
So this is no silver bullet, but rather just one component
to solve this problem.
* contrib/hbnetio/utils/netiosrv.prg
+ Added steps to avoid having the password stored in memory,
while the server is running.
* src/rtl/philes.c
% Minor cleanup.
* contrib/hbnetio/utils/netiosrv.prg
+ Internal change moving all server object related variables to
one array.
+ Added 'config' command.
* Changed exit command to quit to be in sync with other tools and hbrun.
+ Attempt to free password variable.
+ Showing 'unsafe' warning if RPC is enabled without filter module.
* include/hbsetup.ch
* Disabled HB_LEGACY_LEVEL2 by default.
* HB_LEGACY_OFF now controls HB_LEGACY_LEVEL3 (was HB_LEGACY_LEVEL2).
+ Added HB_LEGACY_LEVEL4
; SVN users notice: This may make your C code INCOMPATIBLE with
this version, please review required changes (documented in older
ChangeLog entries) and update your code. Look for HB_LEGACY_LEVEL2
and INCOMPATIBLE keywords.
* contrib/hbnetio/utils/netiosrv.prg
+ contrib/hbnetio/utils/modules.hbp
+ contrib/hbnetio/utils/modules
+ contrib/hbnetio/utils/modules/test.prg
+ Added simple command line to server.
+ Added list of possible feature as TODO. Most of these will
need backend support from hbnetio lib.
+ Added detailed help screen.
+ Added --version option support.
+ Added support for -rpc=file.hrb option. Although for some
reason (most likely my omission) it doesn't work yet.
+ -DHB_EXTERN will now enable inclusion of all core functions.
+ Added build file for .hrb modules.
+ Added little test module.
+ Added SETCANCEL( .F. ) to avoid irregular shutdown with Ctrl+C.
* src/rtl/memoedit.prg
! Deleted hack which explicitly set lastkey to CTRL_END/W
when exiting with changes saved. The comment said that
it was added to make DBU happy, but it doesn't seem to be
necessary anymore, at least I couldn't spot any problem
without it. Pls check it.
! Fixed MEMOEDIT() not recognizing K_ESC as exit key when
custom function is used.
This fixes DBU not recognizing K_ESC as a way to exit
memo editing. Please review, I'm not MEMOEDIT() user
and this was such an obvious omission that I wonder
if there was some real reason for it. Anyhow it was
wrong before.
* contrib/hbfimage/fi_wrp.c
* contrib/hbclipsm/num.c
* contrib/hbclipsm/numfloor.c
* contrib/hbclipsm/status.c
* contrib/hbclipsm/numceil.c
* Formatting.
* harbour/include/hbapi.h
* harbour/src/vm/hashes.c
+ added new function hb_hashGetCItemPtr() which accepts ASCIIZ string
as index.
* harbour/contrib/hbnetio/netiosrv.c
+ added support for using HASH arrays as RPC filter.
Such hash array should be indexed by function/procedure name set of
codeblocks or function references or even objects which understand
EVAL method.
Please remember that function names passed from client side are case
sensitive so if you do not need it then please disable case matching
in the hash array, i.e. using HB_HSETCASEMATCH( hValue, .F. ).
* renamed NETIO_RPCFUNC() to NETIO_RPCFILTER() it's better name now
because we added support for using hash arrays as RPC filters:
NETIO_RPCFILTER( <pConnectionSocket>,
<sFuncSym> | <hValue> | NIL ) -> NIL
* harbour/contrib/hbnetio/netiomt.prg
+ added support for setting RPC filter in NETIO_MTSERVER() using its
4-th parameter:
NETIO_MTSERVER( [<nPort>], [<cIfAddr>], [<cRootDir>],
[<lRPC> | <sFuncSym> | <hValue>],
[<cPasswd>], [<nCompressionLevel>], [<nStrategy>] )
-> <pListenSocket>
* harbour/contrib/hbclipsm/environ.c
! fixed GPF in FILEDRIVE() function on platforms which do not support
drive letters or when path does not contain drive.
% small optimization in FILEPATH(), FILEBASE(), FILEEXT(), FILEDRIVE()
+ harbour/contrib/hbnetio/tests/netiot02.prg
+ added yet another example of NETIO client.
It needs netiosrv executed on the same machine,
see comments inside this code for details.
* harbour/src/rtl/hbznet.c
* move hb_znetOpen() parameter validation from HB_INETCOMPRESS()
to hb_znetOpen() - it should help keeping other code using
hb_znetOpen() more simple
* harbour/contrib/hbnetio/netio.h
* harbour/contrib/hbnetio/netiocli.c
* harbour/contrib/hbnetio/netiosrv.c
+ added support for compression and encryption in NETIO connection
streams. Enabling encryption (password) automatically enable also
compression. If necessary user can set compression level to
HB_ZLIB_COMPRESSION_NONE. HB_ZLIB_COMPRESSION_DISABLE used as
compression level removes compression and encryption.
See below for details of NETIO server and client code modifications.
* harbour/contrib/hbnetio/netiocli.c
+ extended NETIO_CONNECT() client side function parameters:
NETIO_CONNECT( [<cServer>], [<cPort>], [<nTimeOut>], ;
[<cPasswd>], [<nCompressionLevel>], [<nStrategy>] )
-> <lOK>
% changed the behavior of NETIO_CONNECT() client side function.
In the previous version this function was connecting to the server
and then disconnecting so it was used to check if connection is
available and to set default connection parameters.
Now it does not disconnect after successful connection so created
connection is keept and can be reused by any pending NETIO_*() calls.
User can open many different connections in the same time.
The connections are recognized by server and port address.
The connections set by NETIO_CONNECT() function can be closed by
NETIO_DISCONNECT() function.
Each repeated call to NETIO_CONNECT() increase reference counter
in the connection stream and need corresponding number of
NETIO_DISCONNECT() calls.
+ added new PRG client side function:
NETIO_DISCONNECT( [<cServer>], [<cPort>] ) -> <lOK>
which closes connections set by NETIO_CONNECT().
+ added support for passing connection password as part of file path
or function name in format:
<server>[:<port>[:<passwd>]]:<filepath|funcname>
i.e.:
192.168.0.1:2941:secret:path/to/file
Please remember that it's only an alternative method of setting
encryption which does not allow to use CHR(0) or ":" in passwords.
User can always set connection using NETIO_CONNECT() function which
will be used in RPC or FILE IO calls. If more then one connection
is set by NETIO_CONNECT() then user can chose the connection using
only server and port. It's not necessary to pass other connection
parameters.
+ added support for UNC paths:
//<server>[:<port>]/<filepath|funcname>
i.e.:
//192.168.0.1:2941/path/to/file
backslashes (\\) are also supported.
* harbour/contrib/hbnetio/netiosrv.c
% moved 1-st login identification from NETIO_ACCEPT() to NETIO_SERVER()
Such version do not block other connection accepting when server
waits for NETIO_LOGIN frame so it improve scalability and also
protect against code which may want to block access to the server
by opening dummy connections.
+ added new parameters to NETIO_ACCEPT() function which allows to set
encryption and compression for new connections:
NETIO_ACCEPT( <pListenSocket>, [<nTimeOut>],
[<cPass>], [<nCompressionLevel>], [<nStrategy>] )
-> <pConnectionSocket> | NIL
+ added new server side function:
NETIO_COMPRESS( <pConnectionSocket>,
[<cPass>], [<nCompressionLevel>], [<nStrategy>] )
-> NIL
which allow to set or change encryption and compression parameters
in existing connections
* harbour/contrib/hbnetio/netiomt.prg
* updated to accept new connection parameters in NETIO_MTSERVER()
function:
NETIO_MTSERVER( [<nPort>], [<cIfAddr>], [<cRootDir>], [<lRPC>],
[<cPasswd>], [<nCompressionLevel>], [<nStrategy>] )
-> <pListenSocket>
* harbour/contrib/hbnetio/utils/netiosrv.prg
+ added 5-th parameter <passwd> which enable encryption with compression,
current syntx is:
netiosrv [<port>] [<inetaddr>] [<rootdir>] [<rpc>] [<passwd>]
For default values use "" in command line for skipped parameters, i.e.:
netiosrv "" "" "" 1 topsecret
* harbour/contrib/hbnetio/tests/netiotst.prg
* enable RPC, compression and encryption in test code
+ added simple code which use RPC to create directory on the server side
Now it's possible to easy create secure NETIO connections and compression
should help in slow connections when big number of data has to be
exchange. In RDD file access it mostly help when tables use long records.
Hope you will find it useful. Please make tests.
