* harbour/include/hbcompat.ch
* always translate hash H*() function to HB_H*() ones even if
HB_COMPAT_XHB is set. Code which uses HB_H*() functions can
be linked with any Harbour builds
* harbour/include/hbapi.h
* harbour/source/vm/hashes.c
+ added hb_hashId()
* harbour/source/pp/ppcore.c
+ added #ytranslate, #ycommand, #yuntranslate, #yuncommand
case sensitive version of corresponding #x* directives
* harbour/source/rtl/itemseri.c
+ added support for serialization arrays and/or hashes with cyclic
references
* harbour/common.mak
* harbour/bin/pack_src.sh
* harbour/source/vm/Makefile
- harbour/source/vm/dbgentry.c
* harbour/source/debug/Makefile
+ harbour/source/debug/dbgentry.c
* moved dbgentry.c from HVM to DEBUG library
* harbour/source/rtl/hbgtcore.c
+ added basic version of GTI_{NEW,GET,SET}WIN
* harbour/include/hbapidbg.h
* harbour/source/vm/hvm.c
* harbour/source/debug/debugger.prg
* harbour/source/debug/dbgentry.c
+ added set of .prg level functions (HB_DBG_*()) to control
debugger internals
* eliminated HB_INLINE() calls
* use to switch between user and debugger screen
* cleaned debugger interface in HVM, removed unused variables
added one common debug function
* harbour/common.mak
* harbour/source/rtl/Makefile
+ harbour/source/rtl/valtoexp.prg
+ added HB_VALTOEXP() and HB_CSTR()
* harbour/source/debug/dbgthsh.prg
* harbour/source/debug/debugger.prg
* replaced CSTR() with HB_CSTR() and SETLASTKEY() with HB_SETLASTKEY()
now debugger can be used without CT and TIP libraries
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/hbgtcore.c
+ added GTI_ISMULTIWIN, GTI_GETWIN, GTI_SETWIN, GTI_NEWWIN
and TODO note - it's not finished yet, work in progress
* harbour/include/hbapi.h
+ harbour/include/hbapidbg.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbdebug.ch
* harbour/include/hbdefs.h
* harbour/source/compiler/Makefile
* harbour/source/compiler/genc.c
+ harbour/source/compiler/hbdbginf.c
* harbour/source/compiler/hbmain.c
* harbour/source/debug/debugger.prg
* harbour/source/rtl/altd.prg
* harbour/source/vm/Makefile
+ harbour/source/vm/dbgentry.c
* harbour/source/vm/debug.c
* harbour/source/vm/hvm.c
+ added xHarbour compatible low level debugger code
Without some small exceptions like my hbdbginf.c most of
the code created by Phil Krylov <phil a t newstar.rinet.ru>
and borrowed from xHarbour with some small modifications.
* harbour/source/rtl/gete.c
! fixed memory leak in GETENV()
* harbour/source/compiler/hbmain.c
! fixed memory leak when -build or -credit switches were used
* harbour/include/hbpp.h
* harbour/include/hbcomp.h
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/pplib.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbppdef.h
* changed error and warning messages to const char *
* harbour/source/compiler/genhrb.c
* rewritten to work on memory buffers and with new compiler code
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/source/compiler/hbmain.c
* harbour/source/main/harbour.c
+ added LANG_PORT_OBJ_BUF which allow to generate .hrb files into
memory buffers
* harbour/source/compiler/hbcmplib.c
+ added HB_COMPILEBUF() functions which returns compiled .hrb file
as string item
* harbour/source/vm/runner.c
+ added support for executing compiled .hrb files stored in string
items in __HRBRUN() function - it works just like in __HRBLOAD()
* harbour/harbour.spec
* harbour/utils/hbrun/hbrun.prg
+ added default include directories to hbrun
* use HB_COMPILEBUF() instead of HB_COMPILE() to eliminate temporary
files
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
! fixed some possible false warning messages
* harbour/include/hboo.ch
* harbour/source/vm/classes.c
+ added support for HB_OO_MSG_PROPERTY and HB_OO_MSG_CLASSPROPERTY
to make some xHarbour users happy ;-)
* harbour/common.mak
* harbour/harbour.spec
* harbour/include/hbcompdf.h
* harbour/source/compiler/Makefile
+ harbour/source/compiler/hbcmplib.c
+ added HB_COMPILE() function - it accepts exactly the same parameters
as harbour compiler and makes the same job :-)
* harbour/utils/hbrun/Makefile
* harbour/utils/hbrun/hbrun.prg
+ added support for compilation and direct execution of .prg files
Now hbrun can accept as first parameter .hrb or .prg file and if
it's .prg file it's compiled and then executed just like .hrb one.
In *nixes if you copy compiled hbrun to /usr/bin directory then
you can add to your .prg files as first line:
#!/usr/bin/hbrun
and then after setting executable attribute you can directly
execute them, f.e.:
./test.prg
If you are using Linux then you can also chose default gt driver
by dding to above line: //gt<name>
F.e.
#!/usr/bin/hbrun //gtstd
* harbour/common.mak
* harbour/source/lang/Makefile
+ harbour/source/lang/msgnl.c
+ added Dutch language module by Rene Koot
* harbour/config/os2/gcc.cf
* commented out -DTCPV40HDRS in CFLAGS
* harbour/make_gnu.cmd
* added commented by default: set C_USR=-DTCPV40HDRS %C_USR%
* harbour/contrib/libnf/menu1.prg
* harbour/contrib/libnf/pegs.prg
* harbour/contrib/libnf/popadder.prg
* harbour/contrib/libnf/savesets.prg
* harbour/source/debug/dbgmenu.prg
+ added missing #include "common.ch" for HB_SYMBOL_UNUSED()
* harbour/include/hbclass.ch
* renamed __HB_SYMBOL_UNUSED() to __HB_CLS_SYMBOL_UNUSED() to keep
the same name convention as for other hbclass definitions/commands
* harbour/include/hbsetup.h
* added commented by default #define HB_PP_MULTILINE_STRING
with small description
* harbour/source/rtl/net.c
* added missing #include(s) for OS2 build
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* formatting
* harbour/contrib/tip/Makefile
- harbour/contrib/tip/atokens.c
* removed HB_ATOKENS()
- harbour/source/rtl/teditorl.c
- removed __STRTOKEN(), __STRTKPTR()
* harbour/common.mak
* harbour/source/rtl/Makefile
* harbour/include/hbextern.ch
+ harbour/source/rtl/hbtoken.c
+ added set of functions to manipulate string tokens:
HB_TOKENCOUNT( <cString>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <nTokens>
HB_TOKENGET( <cString>, <nToken>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <cToken>
HB_TOKENPTR( <cString>, @<nSkip>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <cToken>
HB_ATOKENS( <cString>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <aTokens>
All these functions use the same method of tokenization. They can
accept as delimiters string longer then one character. By default
they are using " " as delimiter. " " delimiter has special mening
Unlike other delimiters repeted ' ' characters does not create empty
tokens, f.e.: HB_ATOKENS( " 1 2 3 " ) returns array { "1", "2" }
Any other delimiters are restrictly counted, f.e. HB_ATOKENS( ",,1,,2,")
return array: { "", "", "1", "", "2", "" }.
+ added emulation for old __STRTOKEN(), __STRTKPTR() and xHarbour's
__STRTOKENCOUNT() by HB_TOKEN*() functions. They do not return
exactly the same result as __STRT*() functions which in some cases
ignored some delimiters and return wrong results.
* harbour/source/rdd/Makefile
+ harbour/source/rdd/dbsql.c
+ added __DBSQL() function
* harbour/include/hbsetup.h
* harbour/source/vm/fm.c
+ added support for native Windows memory allocation functions
It can be enabled by HB_FM_WIN32_ALLOC macro and disable C-RTL
memory manager.
* harbour/tests/mousetst.prg
* touch screen output before MPRESENT() to work with GTXWC
* harbour/include/Makefile
+ harbour/include/hbchksum.h
* harbour/source/rtl/Makefile
+ harbour/source/rtl/hbadler.c
+ harbour/source/rtl/hbcrc.c
+ harbour/source/rtl/hbmd5.c
+ added functions to calculate different checksums
HB_ADLER( <cValue> [, <nStart> ] ) -> <nCC>
HB_CRC32( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC16( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC ( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_CRCCT( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_MD5( <cString> ) -> <cMD5>
HB_MD5FILE( <cFileName> ) -> <cMD5>
HB_CRC() is general CRC function which can be used for any polynomial
given as second argument, f.e.: 0x104C11DB7 is CRC32 polynomial,
0x18005 -> CRC16, 0x11021 -> CRC16 X.26, 0x1393 -> CRC12, 0x101 -> LCR8
HB_CRCCT() makes exactly the same job but it uses broken algorithm.
Unfortunately it seems that this broken version is widely used by many
other projects, f.e. HB_CRCCT() gives exactly the same results as
COM_CRC() from CT3. Generated results are usually "good enough" but
if you do not need compatibility with some other tools which uses
broken CRC algorithm then I suggest to not use it.
HB_ADLER() is ADLER32 check sum - this function gives the same results
as HB_CHECKSUM in xHarbour.
HB_MD5*() functions are from Dmitry V. Korzhov code modified a
little bit by me for other then x86@32 machines files and buffers
longer then 2^32. I also fixed possible problems with wrong results
in some cases.
* harbour/source/compiler/hbmain.c
* increase number of optimization passes
* harbour/source/pp/ppcore.c
* cleaned C compiler warning
* harbour/common.mak
* updated for new files - please check
* harbour/harbour.spec
* added compiler library
* harbour/bin/pack_src.sh
* harbour/bin/hb-func.sh
* updated for new files and libraries
* harbour/config/w32/mingw32.cf
* harbour/config/w32/watcom.cf
* harbour/config/w32/xcc.cf
* added winsock libraries
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added hb_cdpicmp() - not case sensitive version of hb_cdpcmp()
* harbour/include/hbapiitm.h
* harbour/source/vm/itemapi.c
+ hb_itemStrICmp(), hb_itemCopyFromRef(), hb_itemMoveFromRef()
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbvmpub.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/macro/macrolex.c
* harbour/source/vm/Makefile
* harbour/source/vm/arrays.c
* harbour/source/vm/asort.c
* harbour/source/vm/classes.c
* harbour/source/vm/eval.c
* harbour/source/vm/garbage.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/macro.c
+ harbour/source/vm/hashes.c
+ harbour/source/vm/hashfunc.c
+ added hash items, f.e.:
local h1 := {=>}, h2 := { "a"=>1.234, "b"=>2.345 }
? h2[ "a" ], h2[ "b ]
+ added support for DYNAMIC function declaration - it allow to define
functions which are lately bound at runtime, f.e.:
/*** t01.prg ***/
dynamic func1
proc main()
local h:=__hrbload("t02.hrb")
? func1()
return
/*** t02.prg ***/
func func1
return "Hello!!!"
% use new FUNCALL structure to hold EXTERNAL and DYNAMIC functions,
it reduce memory usage, FUNCALL is much smaller then FUNCTION
% use symbol scope bits when possible instead of making some linear scan
+ added new enumarator message: __ENUMKEY - it allow to access
key value when hash item is base enumerator value, f.e.:
proc main()
local v, h:={"a"=>1.000,"b"=>2.000,"c"=>3.000}
heval( h, { |k,v,i| qout( k, v, i ) } ); ?
for each v in h
? v, "=>", v:__enumKey(), v:__enumValue(), v:__enumIndex(), ;
valtype(v:__enumBase())
v += 0.123
next
? ;heval( h, { |k,v,i| qout( k, v, i ) } )
return
+ added C level hb_hash*() functions
+ added support for full HASH item cloning and updated array cloning
to also clone nested hashes - please note that xHarbour does not do
that, in xHarbour ACLONE() clones _ONLY_ nested arrays and HCLONE()
_DOES_NOT_ clone _ANY_ nested items.
* harbour/include/hbextern.ch
+ added hash functions HB_H*()
* changed INET*() functions to HB_INET*()
+ added hash functions H*() and socket functions INET*() when
HB_COMPAT_XHB is set
* harbour/include/hbtypes.h
+ added missing HB_EXTERN_BEGIN / HB_EXTERN_END
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
! added protection against automatic word concatenation in some cases
! fixed preprocessing expressions when match marker matches ';' token
* harbour/source/rtl/Makefile
+ harbour/source/rtl/itemseri.c
+ added functions for item serialization: HB_SERIALIZE() and
HB_DESERIALIZE() - these function are not binary compatible
with xHarbour functions with the same names but make very
similar job with the exception to serialization of codeblock
and object variables - Harbour does not allow to serialize
codeblocks and serialize objects as arrays.
In most cases these functions can replace the xHarbour ones
+ added HB_DESERIALBEGIN() and HB_DESERIALIZE() functions covered
by HB_COMPAT_XHB macro - this functions are only for compatibility
with existing xHarbour code, In Harbour HB_DESERIALBEGIN() is
dummy function which returns first parameter and HB_DESERIALNEXT()
is a simple wrapper to HB_DESERIALIZE() so it's not necessary to
use them.
* harbour/source/rtl/hbinet.c
* changed INET*() functions to HB_INET*() and enable them for default
build
+ added INET*() functions wrappers covered by HB_COMPAT_XHB macro
* harbour/source/rtl/hbrandom.c
+ added HB_RANDOMINT() - xHarbour compatible
* harbour/source/rtl/len.c
+ added support for HASHes
* harbour/source/rtl/valtype.c
+ added support for HASHes
+ added set of HB_IS*() functions - they are a little bit faster then
calling VALTYPE( v ) == <cVal>
- removed HB_ISBYREF() - this function cannot longer work, it was using
a Clipper incompatible anomalies in passing variables by reference I
fixed so it has to stop to work. If it will be realy necessary to
implement HB_ISBYREF() function then please inform me - it will have
to be done at compiler level or with some much deeper HVM stack
checking.
* harbour/source/vm/extend.c
! fixed hb_extIsArray() and hb_extIsObject() to work well with
parameters passed by reference.
Please note that now hb_extIsArray() return TRUE only for pure arrays
not object values.
* harbour/contrib/Makefile
+ harbour/contrib/tip/Changelog
+ harbour/contrib/tip/Makefile
+ harbour/contrib/tip/atokens.c
+ harbour/contrib/tip/base64x.c
+ harbour/contrib/tip/cgi.prg
+ harbour/contrib/tip/client.prg
+ harbour/contrib/tip/credent.prg
+ harbour/contrib/tip/cstr.prg
+ harbour/contrib/tip/encb64.prg
+ harbour/contrib/tip/encmthd.c
+ harbour/contrib/tip/encoder.prg
+ harbour/contrib/tip/encqp.prg
+ harbour/contrib/tip/encurl.prg
+ harbour/contrib/tip/ftpcln.prg
+ harbour/contrib/tip/hbhex2n.c
+ harbour/contrib/tip/httpcln.prg
+ harbour/contrib/tip/mail.prg
+ harbour/contrib/tip/popcln.prg
+ harbour/contrib/tip/smtpcln.prg
+ harbour/contrib/tip/tip.ch
+ harbour/contrib/tip/url.prg
+ harbour/contrib/tip/utils.c
+ added TIP library - code borrowed from xHarbour
Please test - a lot of above code is not well tested, also some peaces
were written over year ago for different things (f.e. serialization for
NETRDD) and now I collected them and committed.
The TIP library was not tested at all. It can be compiled but I cannot
say if it works - I hope that people familiar with it can make necessary
test and fixes.
It's also not the final version of low level HASH item code. I'm working
on more efficient structure which uses binary tries but I cannot say when
I'll finish it (maybe in this weekend or maybe in next year) so I committed
working version now even if I'm not happy with overall performance (BTW
not worser then in xHarbour)
* harbour/include/hbapi.h
* harbour/include/hbapiitm.h
* harbour/source/vm/garbage.c
* harbour/source/vm/extend.c
* harbour/source/vm/itemapi.c
+ added hb_gcFunc(), hb_parptrGC(), hb_itemGetPtrGC()
hb_parptrGC() and hb_itemGetPtrGC() uses GC cleanup function address
to validate if pointer item points to expected memory block type
* harbour/source/common/hbhash.c
* harbour/source/compiler/hbident.c
* formatting and minor modifications
* harbour/source/pp/pplib.c
* harbour/source/pp/pplib2.c
* use hb_parptrGC() to be sure that given pointer item points
to PP structure
+ harbour/include/hbregex.h
+ harbour/source/rtl/hbregex.c
* harbour/source/rtl/Makefile
* harbour/common.mak
+ added support for regular expressions. Now it's enabled by default
only in *nixes (POSIX regex) and BCC 5.5 (PCRE regex). Setting
HB_PCRE_REGEX macro enables Perl-Compatible Regular Expressions
and HB_POSIX_REGEX - POSIX regular expressions. In xHarbour regex
support is enabled for all builds because PCRE source code is stored
in CVS. If you will want we can make the same.
+ the following C functions are available:
hb_regexCompile(), hb_regexGet(), hb_regexFree(), hb_regexMatch()
+ the following PGR functions are available:
HB_REGEXCOMP(), HB_ISREGEX(), HB_ATX(), HB_REGEX(), HB_REGEXMATCH(),
HB_REGEXSPLIT(), HB_REGEXATX(), HB_REGEXALL()
They are working in similar way to the ones in xHarbour with the
exception to some bug fixes and form of compiled regular expression.
In Harbour it's pointer item for which HB_ISREGEX() returns TRUE when
in xHarbour it's binary string.
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
* enabled code to seek in index using regular expressions
(DBOI_SKIPREGEX[BACK])
* harbour/include/hbexpra.c
* emulate xHarbour HB_ENUMINDEX() inside FOR EACH loop when
HB_COMPAT_XHB macro is set
It's only for compatibility - I strongly suggest to use
<unumvar>:__enumIndex()
which is more flexible and allow to chose the enumerator
variable not only the one from last loop
* harbour/include/hbexprb.c
* added comment removed from hbexpra.c
* harbour/source/compiler/hbmain.c
! fixed GPF which can appear when -b option is used in line numbering
inside codeblocks
* harbour/common.mak
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/bin/hb-func.sh
* harbour/config/global.cf
* harbour/include/error.ch
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
- harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/source/Makefile
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
- harbour/source/compiler/exproptc.c
- harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbgenerr.c
+ harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbpcode.c
* harbour/source/macro/Makefile
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
- harbour/source/macro/macroc.c
+ harbour/source/main/Makefile
+ harbour/source/main/harbour.c
* harbour/source/vm/macro.c
* resolved name conflicts between compiler and macro compiler.
Now new compiler library is created.
There are some things which can be improved and cleaned yet
but it's enough to create single binaries with compiler+HVM+RTLs.
I updated non GNU make files but I cannot tested the modifications
- please check and fix me if necessary
* harbour/config/os2/global.cf
* harbour/contrib/hgf/os2pm/os2pm.c
* harbour/include/hbdefs.h
* harbour/include/hbgtcore.h
* harbour/source/rdd/dbcmd.c
* harbour/source/vm/mainpm.c
* cleaned OS2 build errors and warnings reported by David Macias.
Modifications not tested - OS2 users will have to make tests and
reports problems.
* harbour/include/hbclass.ch
* cleaned scope error message
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
* added hack for accepting expressions which start with ':' character
as regular/list match markers
* harbour/include/hbpp.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/pp/ppcore.c
* updated lexer to recognize IF(<exp1>,<exp2>,<exp3>) in expressions like
IF(<exp,...>) - it allow to make some grammar rules much more simple.
* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/hbdate.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/rtl/abs.c
* harbour/source/rtl/at.c
* harbour/source/rtl/chrasc.c
* harbour/source/rtl/datec.c
* harbour/source/rtl/dateshb.c
* harbour/source/rtl/diskspac.c
* harbour/source/rtl/disksphb.c
* harbour/source/rtl/gtfunc.c
* harbour/source/rtl/left.c
* harbour/source/rtl/len.c
* harbour/source/rtl/math.c
* harbour/source/rtl/minmax.c
* harbour/source/rtl/mod.c
* harbour/source/rtl/philes.c
* harbour/source/rtl/philesx.c
* harbour/source/rtl/replic.c
* harbour/source/rtl/round.c
* harbour/source/rtl/set.c
* harbour/source/rtl/space.c
* harbour/source/rtl/strcase.c
* harbour/source/rtl/strpeek.c
* harbour/source/rtl/transfrm.c
* harbour/source/rtl/trim.c
* harbour/source/rtl/type.c
* harbour/source/rtl/val.c
* harbour/source/rtl/word.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* added some PCODEs to cover all possible combination of ++, --, <op>=
operations in the same way and keep Clipper compatible RT errors.
* added some other PCODEs to optimize some commonly used expressions/
statements
* use HB_ERR_ARGS_BASEPARAMS instead of hb_paramError()
* some other cleanups and minor optimizations
* harbour/utils/hbtest/rt_math.prg
* update expected result for MOD() - it was not Clipper compatible and
it will be hard to make it compatible without introducing some Clipper's
side effects
* harbour/include/hbstdgen.ch
* added #undef HB_COMPAT_XHB
* harbour/source/common/hbstr.c
* indenting
* harbour/source/compiler/ppcomp.c
* updated line numbering in #pragma dump code and error messages
executed for disabled code
* harbour/source/pp/ppcore.c
* changed the precedence of #pragma BEGINDIUMP/ENDDUMP - now
it has higher precedence then conditional compilation with
#IF[DEF]/#ENDIF
* added support for defined() pseudo function in #IF / #ELIF
directives, f.e.:
#if defined( __HARBOUR__ ) .and. !defined( HB_COMPAT_XHB )
#stdout "Harbour compiler compiled without xHarbour extensions."
#endif
* harbour/include/hbexprop.h
* harbour/source/common/expropt1.c
+ added hb_compExprAsNumSign()
* harbour/include/hbexprc.c
* optimize lValue++ and ++lValue
* harbour/source/common/hbdate.c
* minor optimization
* harbour/source/compiler/cmdcheck.c
* maximum supported warning level should be 3 not 4
* harbour/include/hbxvm.h
* harbour/source/compiler/gencc.c
* harbour/source/vm/hvm.c
* use separate functions for equal and exactly equal operations
* cleanup and some other minor optimizations
* harbour/source/compiler/hbopt.c
* optimize PCODEs for code like: lVar:=lVar, sVar:=sVar, mVar:=mVar, ...
* harbour/include/common.ch
* changed HB_SYMBOL_UNUSED( symbol ) to ( symbol := ( symbol ) )
It's a little bit simpler version and now it's also stripped by
PCODE optimizer
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* eliminated some redundant rules
* optimized PCODEs generated for FOR/NEXT code and removed some old
hardcoded optimization for local variables - if it will be worth
to optimize then such optimization will be done by expression
optimizer
* chaned a little bit WITHOBJECT syntax.
Now WITHOBJECT somefunc(); END is not silently ignored and call
to somefunc() is left. This optimization also works when there
are empty line between WITHOBJECT and END
* harbour/source/rdd/dbf1.c
! fixed for GPF in DBRI_RAWDATA, DBRI_RAWMEMOS (Peter Rees fix in
xHarbour)
* harbour/common.mak
* harbour/source/compiler/Makefile
* harbour/source/compiler/hbfix.c
+ harbour/source/compiler/hbopt.c
* divided hbfix.c into two separated functions:
- hb_compFixFuncPCode() which only fix generated PCODE updating
local parameters numbers when PARAMETERS is used
- hb_compOptimizePCode() which makes PCODE optimization
It allows to not execute hb_compFixFuncPCode() when PARAMETERS
is not use and execute hb_compOptimizePCode() more then once in
optimization process.
* harbour/hbgtmk.sh
* updated CVS server name
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hbident.c
* changed code for generating in PCODE line numbers and module names
there was serious problem with line numbers and module names in old
code - in many cases line numbers were not generated at all or
generated in wrong places. Also file module name was not updated
when inside of function some code was included with #include
For such situation now modified version of HB_P_MODULE is generated
with module name only but without function name, f.e.:
HB_P_MODULE "test.prg:"
exactly the same form of HB_P_MODULE is used in xHarbour.
Debugger code should be updated to recognize such HB_P_MODULE version
Ryszard any chance that you can look at it?
And what about syncing with xHarbour debugger?
I can add some missing functions to compiler and HVM but I do not
want to update next peace of code myself. Sorry but I do not have
enough time. I'd prefer to finish some other things I'm working.
If Ryszard is busy can someone else try to port xHarbour debugger
to Harbour?
* harbour/bin/hb-func.sh
* do not pass linking parameters to GCC/G++ when is used for
compilation only
* harbour/contrib/rdd_ads/Makefile
* set -DWIN32 for W32 compilation
* harbour/contrib/rdd_ads/makefile.bc
* formatting
* harbour/include/hbapi.h
* harbour/source/rtl/strcase.c
+ added hb_charUpper() and hb_charLower()
* harbour/include/hbapigt.h
* harbour/include/hbgtcore.h
* harbour/source/rtl/gtapi.c
* harbour/source/rtl/hbgtcore.c
+ added support for ALERT() on GT level - C functions: hb_gtAlert()/
hb_gt_Alert()
To replicate some details of Clipper and CT3 behavior ALERT() cannot
be implement only on upper level as .prg function
* harbour/source/rtl/gtfunc.c
+ added .prg function HB_GTALLERT()
* harbour/source/rtl/alert.prg
* redirected ALERT() to HB_GTALLERT()
* harbour/source/rtl/fstemp.c
* use the same case conversion as in low level hb_fs*() functions to
avoid possible problems with national characters
* harbour/source/rtl/dates.c
* harbour/source/rtl/set.c
* harbour/source/rtl/strmatch.c
* harbour/source/rtl/transfrm.c
* use hb_charUpper()
* casting
* harbour/source/rtl/isprint.c
* harbour/include/hbapi.h
! hb_printerIsReady() C level function made public again.
+ Added proper declaration for it.
* harbour/bin/bld.bat
! Mistakenly committed change undone.
* harbour/include/hbgtinfo.ch
* harbour/contrib/libct/ctwin.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
+ added support for GTI_FULLSCREEN, GTI_KBDSUPPORT, GTI_ISCTWIN
* harbour/source/rtl/hbgtcore.c
! fixed line and box drawing when the coordinates are out of screen size
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbpcode.h
* harbour/include/hbstack.h
* harbour/include/hbvm.h
* harbour/include/hbxvm.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/classes.c
* harbour/source/vm/estack.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
! added protection against cyclic references in arrays
* eliminated action parameter from hb_vmRequestReenter() /
hb_vmRequestRestore()
* moved s_lRecoverBase and s_uiActionRequest to HB_STACK structure
for future MT HVM version
+ added internal item structure hb_struRecover - it's not real item
but this structure is used to keep information about BEGIN SEQUENCE
data - it reduce HB_STACK usage
+ added support for ALWAYS clause in BEGIN SEQUENCE
The syntax is:
BEGIN SEQUENCE
<code>
[ RECOVER [ USING oErr ] ]
<recoverCode>
[ ALWAYS ]
<alwaysCode>
END [ SEQUENCE ]
It's guaranteed that <alwaysCode> is _ALWAYS_ executed even if
inside <code> or <recoverCode> some new exceptions like RETURN,
BREAK or QUIT will appear.
Please note that when the following code is executed:
BEGIN SEQUENCE
<code>
ALWAYS
<alwaysCode>
END
(without RECOVER clause) then BREAK exception inside <code> is not
recovered, <alwaysCode> is executed and then BREAK exception is
passed to outer BEGIN SEQUENCE. This is the same semantic as
used in TRY / [ CATCH ] / FINALLY / END
Those of you who prefer to use TRY / CATCH / FINALLY / END instead
of BEGIN SEQUENCE / RECOVER / ALWAYS / END can simply add to your
source code:
#command TRY => BEGIN SEQUENCE
#command CATCH [ oErr ] => RECOVER [ USING <oErr> ]
and:
errorBlock( {|oErr| break( oErr ) } )
Though instead of 'break( oErr )' I suggest to use some small function
which will support some basic recovery/substitute operations like in
default errorsys() and LockErrHandler() to not break existing code
which may depends on the default behavior.
If you want I can add direct support for TRY / CATCH / FINALLY / END
but I'm not sure it's really necessary.
Please note also that in Harbour ALWAYS code is execute even for QUIT
excpetion.
When <alwaysCode> is executed current exception is stored and restored
when is finished. If new exception appears inside <alwaysCode> then
restored exception depends on the priority in the following order:
QUIT // highest priority
BREAK
RETURN
If both exceptions have the same priority and contain additional value
(error object in BREAK or return value in RETURN) then the recently set
one is restored. It's similar behavior to destructor code.
* harbour/source/common/hbstr.c
* moved one character length string table (hb_szAscii) from hvm.c
to use it also in compiler and preprocessor
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/pplib.c
* tuned error messages to be more Clipper compatible
% use static strings from hb_szAscii
* harbour/source/rtl/alert.prg
* use hb_gtInfo( GTI_FULLSCREEN ) to detect type of GT driver
! some minor fixes
TOFIX: we have to also use GTI_ISCTWIN or add window allocation
to standard GT drivers to be Clipper compatible when CTWIN
is used - In Clipper Tools ALERT() works in differ way then
the standard one. It creates separate window box to display
data, supports SETKEY(), etc. I'll think about adding some
extended support for ALERT() and similar operations (f.e.
separate debugger windows) to GT API so it will be also
possible to overload standard alert() command by GUI message
box in GTGUI and similar GT drivers.
* harbour/source/rtl/binnumx.c
! fixed U2BIN() - wrong casting
* harbour/contrib/libct/ctc.c
* harbour/contrib/libct/files.c
* harbour/contrib/libnf/ftattr.c
* harbour/contrib/libnf/n2color.c
* cleaned some BCC warnings
* harbour/include/hbapi.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbsetup.ch
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/common/hbver.c
* harbour/source/common/hbverdsp.c
* harbour/source/compiler/hbcomp.c
* harbour/source/vm/arrays.c
* harbour/source/vm/arrayshb.c
* harbour/source/vm/cmdarg.c
* harbour/source/vm/hvm.c
! fixed Harbour support for accessing string characters with array
index operators []
+ added support for #define HB_COMPAT_XHB - it's disabled by default.
When set it enables some of xHarbour features like negative array
indexes calculated from tail, accessing string characters with []
operators (warning it's not compatible with default Harbour version
enabled by -ks during compilation and //flags:s at runtime - in
xHarbour compatibility mode "ABC"[2] returns "B" when in Harbour 66)
and some other minor features.
* harbour/source/compiler/cmdcheck.c
* added support for optional setting C output type in -go switch
Now it accepts optional digit [0123] after -go in the same way
as -gc, f.e.: -go3
* harbour/source/compiler/harbour.c
* call hb_compExprLstDealloc() only when errors appeared during
compilation - it disable automatic freeing all allocated expressions
in clean compilation. I make it intentionally for easier detecting
problems one some expressions are not freed. So far the final cleanup
code always deallocated expressions what can hide some real bugs.
* harbour/source/vm/hvm.c
! fixed very serious bug in HVM closing. The s_uiActionRequest flag
was not cleared before hb_rddShutDown() so when RDD buffers were
hot and flushing required some PCODE evaluation (f.e. index KEY
or FOR expression) then they were not properly evaluated.
* harbour/source/vm/macro.c
* minor improvement
* harbour/utils/hbtest/rt_misc.prg
! fixed one of expected result, it was neither Harbour nor Clipper
result (I've just made some test with Clipper), I do not know why
it existed
* harbour/contrib/rdd_ads/adsfunc.c
* harbour/source/rdd/workarea.c
* formatting
* harbour/include/hbapi.h
* harbour/source/vm/extend.c
+ added missing hb_storptrGC()
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added parameter to unicode translation function to protect control
code translation
* formatting
* harbour/source/rtl/gtsln/kbsln.c
* harbour/source/rtl/gtxwc/gtxwc.c
* use new unicode translation function format. It also fixes problem
with space translation in GTLSN used in UTF8 mode
* harbour/include/hbapiitm.h
* harbour/source/vm/itemapi.c
+ added hb_itemCopyToRef(), hb_itemMoveToRef(), hb_itemMoveRef(),
hb_itemUnRefWrite()
* harbour/include/hbexprb.c
! use HB_P_DUPLUNREF instead of HB_P_DUPLICATE when assign is used in
push context - Clipper compatible behavior, see:
x:=10
f(y:=iif(.t.,@x,))
? x, y
func f(x)
x+=100
return nil
* harbour/include/hbver.h
* harbour/source/common/hbver.c
* changed status to "devel"
* harbour/source/common/expropt2.c
* disabled setting NIL when iif(.t.,,sth()) is optimized to avoid
warning when iif() is used as statement - to fix number of parameters
passed to function in code like f(iif(.t.,,sth())) we will need a
little bit deeper modification
* harbour/source/compiler/complex.c
* added hack for potential problems caused by WITH OBJECT syntax, f.e.
in code like:
proc p(obj,x)
case:=myCaseClass():new()
retu:=myCaseClass():new()
WITH OBJECT obj
do case
case x==nil
case:value()
case:action()
retu:sth()
end
END
case:action()
retu:sth()
return
case:action(), case:value(), retu:sth() can means two different things
and compiler cannot guess which one should use. It cannot be fixed
because it's caused by bad WITH OBJECT syntax. In xHarbour constractions
like case:value() or retu:sth() are always used as in WITH OBJECT
context what is not Clipper compatible. I do not want to introduce
such limitations. We have two choices: change WITH OBJECT syntax or
add some hack to "hide" the problem a little bit. Now I intorduce
ugly hack which check number of spaces between ':' so
case :action()
is compiled as case condition using WITH OBJECT message and
case:action() as sending message to object in case variable
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
+ added support for passing base value to FOR EACH by reference.
* harbour/source/vm/arrays.c
* use hb_itemMoveRef() in AINS()/ADEL() to avoid creation of cyclic
reference chains
* harbour/source/vm/debug.c
* harbour/source/vm/memvars.c
* use hb_itemCopyToRef() to avoid creation of cyclic reference chains
* harbour/source/vm/classes.c
* harbour/source/vm/hvm.c
* use hb_itemMoveToRef() to avoid creation of cyclic reference chains
+ added support for for writable string enumerators, f.e.:
proc main()
local s, c
s:="abcdefghijklmnopqrst"
for each c in @s
if c$"aeio"
c:="*"
endif
next
? s // "*bcd*fgh*jklmn*pqrst"
return
* harbour/ChangeLog
+ harbour/ChangeLog.017
* new ChangeLog file created
* harbour/doc/whatsnew.txt
* harbour/harbour.spec
* harbour/include/hbver.h
* updated version number to 0.47.0
* tagged CVS as build47
* harbour/ChangeLog
+ harbour/ChangeLog.017
* new ChangeLog file created
* harbour/doc/whatsnew.txt
* harbour/harbour.spec
* harbour/include/hbver.h
* updated version number to 0.47.0
* tagged CVS as build47
* harbour/include/hbexpra.c
! fixed GPF which can appear on syntax error during compilation
one of enumerator message
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* accept the folowing syntax: (@var):msg
With this modification FOR EACH overloading is completed.
* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbusage.c
* harbour/source/compiler/ppcomp.c
* harbour/source/macro/Makefile
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/vm/macro.c
* harbour/source/vm/memvars.c
* harbour/source/vm/memvclip.c
* keep prefix definition for bison public symbols in *.y files instead
of passing them as bison arguments to avoid possible mistakes during
*.yy[hc] file generation
! fixed iif() reduction when used as single function parameter
+ add -kM compiler switch - turn off macrotext substitution
* updated <string> + <string> optimization and other macrotext usage
to keep more Clipper compatible behavior
! fixed typo in expression type checking in IIF() reduction - it was
working because wrongly used macros has the same values as the valid
ones
- removed compiler switches and macros for old HB_INLINE() syntax - it
was not supported after last months modifications. Only:
HB_INLINE([params,...]) { C code }
is supported.
! fixed passing parameters by reference in IIF() statement and macro
compiler. The following valid Clipper code:
&("myfunc(<exp>, @var1, @var2)")
was not supported
! do not allow to use references or empty expressions in expression list
AFAIK it's Clipper compatible. If I'm wrong then please fix me but
Clipper allows to use references only as function arguments, 2-nd and
3-rd IIF() argument and as directly created array items ( {...@var...} )
DO ... WITH ... is a special case of function call.
! Changed grammar rules to accept only Clipper compatible parameters.
! fixed typo in macro name in hb_memvarNewParameter() function.
* use HB_FUNC_EXEC(...) instead of HB_FUNCNAME(...)()
* harbour/include/hbexprb.c
* make function call optimizations only when hb_compFunCallCheck()
do not report errors
* harbour/source/common/reserved.c
+ added VALTYPE to list of reserved words and shortcuts (Clipper
compatible)
* harbour/source/compiler/hbfunchk.c
* checking for number of parameters in FILE() function call is Harbour
extension - do not enable it when HB_C52_STRICT macro is set
* harbour/source/rtl/filehb.c
* formatting
* harbour/include/hbcompdf.h
+ added comment
* harbour/include/hbexpra.c
* change expression type for <exp> = <exp> from HB_EO_EQUAL
to HB_EO_ASSIGN in hb_compExprGenStatement() function so
later we can safely make all optimization in hb_compExprUseEqual()
during reduce process - optimization only when PCODE is generated
is too late and causes that expressions like:
iif( 1 = 1, <exp>, <exp> )
are not reduces (Clipper reduce them)
* do not execute hb_compFunCallCheck() in hb_compExprNewFunCall()
to avoid repeating the same error message in hb_compExprUseFunCall()
* harbour/include/hbexprb.c
* enabled reduction for hb_compExprUseEqual() and generate errors
when it's used as statement
* harbour/source/common/expropt2.c
* added some missing reductions for expressions like: NIL == NIL
* harbour/source/common/reserved.c
% very basic optimization: use binary search instead of linear
scanning for reserved words and shortcuts - it gives noticeable
speed improvement in macro compiler
* harbour/source/compiler/complex.c
* changed the order of special keywords to keep alphabetic sorting
* harbour/source/compiler/harbour.c
% some minor optimizations in aliased expressions
! added protection in hb_compIsJump() to avoid possible problems
when this function is executed after replacing some code with
jumps by series of NOOPs in optimizations process
* harbour/source/compiler/hbfix.c
* better optimization of PCODE generated for logical expressions
* harbour/source/compiler/hbfunchk.c
% use binary search instead of linear scan
* harbour/source/rtl/minmax.c
! fixed GPF when MIN() or MAX() function is called with less then
two parameters
* harbour/source/vm/itemapi.c
* minor optimization and formatting
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/source/common/expropt1.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbgenerr.c
* harbour/source/macro/macro.l
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/macro/macrolex.c
* harbour/source/vm/macro.c
* final grammar cleanup: removed unused and/or unnecessary grammar
expressions in *.y files, fixed some differences between compiler
and macrocompiler, fixed some other bugs, typos, clipper
incompatibilities, etc.
It's end of year, it's late and sorry but I'd like to begin making
something absolutely differ then creating detail description ;-)
If you will have any questions then I'll answer in new year.
* harbour/source/rdd/dbffpt/Makefile
* small hack for XCC compilation
best regards and happy new year,
Przemek
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbpcode.h
* harbour/include/hbpp.h
* harbour/include/hbxvm.h
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hbpcode.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* changed HB_P_MACROPUSHINDEX PCODE behavior - now it does not evaluated
macro expression
* eliminated HB_ET_MACRO_INDEX - HB_ET_MACRO_LIST can be used instead
* accept ... in codeblocks only when codeblocks parameters are defined
as variables, f.e: {|a,b,...|qout(a+b,...)}
! fixed error in a[&s]:=100
+ added support for a[...] - now ... can be used in the same context as
xbase++ like multivalue macro (a[&s])
* disabled ++, --, <op>= optimizations when -kc (strict Clipper
compatibility mode) compiler switch is used
