* harbour/source/rtl/hbinet.c
! Warnings fixed for Darwin (gcc 4.0.1 OSX 10.4.9 PPC)
* harbour/source/rtl/idle.c
! Fixed releasing idle CPU cycles. (thanks Przemek)
The committed method was tested against usleep( 1 )
and usleep( 100 ) and found to work perfect as
opposed to the usleep() calls.
* harbour/source/rtl/tget.prg
! Adjusted my old TOFIX note.
* harbour/include/hbcompat.ch
* always translate hash H*() function to HB_H*() ones even if
HB_COMPAT_XHB is set. Code which uses HB_H*() functions can
be linked with any Harbour builds
* harbour/include/hbapi.h
* harbour/source/vm/hashes.c
+ added hb_hashId()
* harbour/source/pp/ppcore.c
+ added #ytranslate, #ycommand, #yuntranslate, #yuncommand
case sensitive version of corresponding #x* directives
* harbour/source/rtl/itemseri.c
+ added support for serialization arrays and/or hashes with cyclic
references
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/ppcomp.c
! fixed file name in errors/warnings generated from PP just after
including some file
* harbour/source/debug/debugger.prg
* removed some not longer necessary GTWVW extensions
* harbour/source/rtl/hbgtcore.c
* harbour/contrib/libct/ctwin.c
+ added support for GTI_{NEW,GET,SET}WIN in CTWIN
Now debugger can be used with CTWIN without any problems
* harbour/common.mak
* harbour/bin/pack_src.sh
* harbour/source/vm/Makefile
- harbour/source/vm/dbgentry.c
* harbour/source/debug/Makefile
+ harbour/source/debug/dbgentry.c
* moved dbgentry.c from HVM to DEBUG library
* harbour/source/rtl/hbgtcore.c
+ added basic version of GTI_{NEW,GET,SET}WIN
* harbour/include/hbapidbg.h
* harbour/source/vm/hvm.c
* harbour/source/debug/debugger.prg
* harbour/source/debug/dbgentry.c
+ added set of .prg level functions (HB_DBG_*()) to control
debugger internals
* eliminated HB_INLINE() calls
* use to switch between user and debugger screen
* cleaned debugger interface in HVM, removed unused variables
added one common debug function
* harbour/source/debug/dbgtarr.prg
! Fixed unclosed #if construct.
Question: What does HB_NO_READDBG do?
* harbour/source/rtl/tget.prg
! Removed :Assign() call from :UpdateBuffer() to close
the functionality to CA-Cl*pper.
* harbour/common.mak
* harbour/source/rtl/Makefile
+ harbour/source/rtl/valtoexp.prg
+ added HB_VALTOEXP() and HB_CSTR()
* harbour/source/debug/dbgthsh.prg
* harbour/source/debug/debugger.prg
* replaced CSTR() with HB_CSTR() and SETLASTKEY() with HB_SETLASTKEY()
now debugger can be used without CT and TIP libraries
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/hbgtcore.c
+ added GTI_ISMULTIWIN, GTI_GETWIN, GTI_SETWIN, GTI_NEWWIN
and TODO note - it's not finished yet, work in progress
* harbour/source/rtl/tget.prg
! Get method UpdateBuffer() fixed to be effective only
when the object has focus (as per the C52 docs and
Lorenzo's report).
* harbour/source/debug/debugger.prg
! Fixed a few compile errors.
! Reapplied (and extended) a former fix regarding
the proper handling of the filenames.
* harbour/source/rtl/tbrowse.prg
; Cosmetic.
* harbour/include/hbapi.h
+ harbour/include/hbapidbg.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbdebug.ch
* harbour/include/hbdefs.h
* harbour/source/compiler/Makefile
* harbour/source/compiler/genc.c
+ harbour/source/compiler/hbdbginf.c
* harbour/source/compiler/hbmain.c
* harbour/source/debug/debugger.prg
* harbour/source/rtl/altd.prg
* harbour/source/vm/Makefile
+ harbour/source/vm/dbgentry.c
* harbour/source/vm/debug.c
* harbour/source/vm/hvm.c
+ added xHarbour compatible low level debugger code
Without some small exceptions like my hbdbginf.c most of
the code created by Phil Krylov <phil a t newstar.rinet.ru>
and borrowed from xHarbour with some small modifications.
* harbour/source/rtl/gete.c
! fixed memory leak in GETENV()
* harbour/source/compiler/hbmain.c
! fixed memory leak when -build or -credit switches were used
* harbour/include/hbpp.h
* harbour/include/hbcomp.h
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/pplib.c
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbppdef.h
* changed error and warning messages to const char *
* harbour/source/compiler/genhrb.c
* rewritten to work on memory buffers and with new compiler code
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/source/compiler/hbmain.c
* harbour/source/main/harbour.c
+ added LANG_PORT_OBJ_BUF which allow to generate .hrb files into
memory buffers
* harbour/source/compiler/hbcmplib.c
+ added HB_COMPILEBUF() functions which returns compiled .hrb file
as string item
* harbour/source/vm/runner.c
+ added support for executing compiled .hrb files stored in string
items in __HRBRUN() function - it works just like in __HRBLOAD()
* harbour/harbour.spec
* harbour/utils/hbrun/hbrun.prg
+ added default include directories to hbrun
* use HB_COMPILEBUF() instead of HB_COMPILE() to eliminate temporary
files
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
! fixed some possible false warning messages
* harbour/include/hboo.ch
* harbour/source/vm/classes.c
+ added support for HB_OO_MSG_PROPERTY and HB_OO_MSG_CLASSPROPERTY
to make some xHarbour users happy ;-)
* harbour/common.mak
* harbour/harbour.spec
* harbour/include/hbcompdf.h
* harbour/source/compiler/Makefile
+ harbour/source/compiler/hbcmplib.c
+ added HB_COMPILE() function - it accepts exactly the same parameters
as harbour compiler and makes the same job :-)
* harbour/utils/hbrun/Makefile
* harbour/utils/hbrun/hbrun.prg
+ added support for compilation and direct execution of .prg files
Now hbrun can accept as first parameter .hrb or .prg file and if
it's .prg file it's compiled and then executed just like .hrb one.
In *nixes if you copy compiled hbrun to /usr/bin directory then
you can add to your .prg files as first line:
#!/usr/bin/hbrun
and then after setting executable attribute you can directly
execute them, f.e.:
./test.prg
If you are using Linux then you can also chose default gt driver
by dding to above line: //gt<name>
F.e.
#!/usr/bin/hbrun //gtstd
* harbour/common.mak
* harbour/source/codepage/Makefile
* harbour/source/codepage/cphu852.c
+ harbour/source/codepage/cphu852s.c
! Default Hungarian 852 codepage made 100% compatible with
ntxhu852.obj for CA-Cl*pper 5.x.
+ Added Hungarian 852 codepage 100% compatible with
sixhu852.obj for S*ccessWare SIx Driver.
(this was formerly used as the default Hungarian 852
codepage for Harbour, the only change now is the ID and
comment cleanup.)
* harbour/source/rtl/persist.prg
* harbour/source/rtl/tbrowse.prg
* harbour/source/rtl/teditor.prg
% Replaced __StrT*() internal functions with native Harbour
extensions hb_Token*().
% Removed workarounds for problems with the previous implementation
of the __StrT*() functions.
Please test TEditor (all) and TBrowse class (header/footer line splitting).
* harbour/common.mak
* harbour/source/lang/Makefile
+ harbour/source/lang/msgnl.c
+ added Dutch language module by Rene Koot
* harbour/config/os2/gcc.cf
* commented out -DTCPV40HDRS in CFLAGS
* harbour/make_gnu.cmd
* added commented by default: set C_USR=-DTCPV40HDRS %C_USR%
* harbour/contrib/libnf/menu1.prg
* harbour/contrib/libnf/pegs.prg
* harbour/contrib/libnf/popadder.prg
* harbour/contrib/libnf/savesets.prg
* harbour/source/debug/dbgmenu.prg
+ added missing #include "common.ch" for HB_SYMBOL_UNUSED()
* harbour/include/hbclass.ch
* renamed __HB_SYMBOL_UNUSED() to __HB_CLS_SYMBOL_UNUSED() to keep
the same name convention as for other hbclass definitions/commands
* harbour/include/hbsetup.h
* added commented by default #define HB_PP_MULTILINE_STRING
with small description
* harbour/source/rtl/net.c
* added missing #include(s) for OS2 build
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* formatting
* harbour/contrib/tip/Makefile
- harbour/contrib/tip/atokens.c
* removed HB_ATOKENS()
- harbour/source/rtl/teditorl.c
- removed __STRTOKEN(), __STRTKPTR()
* harbour/common.mak
* harbour/source/rtl/Makefile
* harbour/include/hbextern.ch
+ harbour/source/rtl/hbtoken.c
+ added set of functions to manipulate string tokens:
HB_TOKENCOUNT( <cString>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <nTokens>
HB_TOKENGET( <cString>, <nToken>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <cToken>
HB_TOKENPTR( <cString>, @<nSkip>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <cToken>
HB_ATOKENS( <cString>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <aTokens>
All these functions use the same method of tokenization. They can
accept as delimiters string longer then one character. By default
they are using " " as delimiter. " " delimiter has special mening
Unlike other delimiters repeted ' ' characters does not create empty
tokens, f.e.: HB_ATOKENS( " 1 2 3 " ) returns array { "1", "2" }
Any other delimiters are restrictly counted, f.e. HB_ATOKENS( ",,1,,2,")
return array: { "", "", "1", "", "2", "" }.
+ added emulation for old __STRTOKEN(), __STRTKPTR() and xHarbour's
__STRTOKENCOUNT() by HB_TOKEN*() functions. They do not return
exactly the same result as __STRT*() functions which in some cases
ignored some delimiters and return wrong results.
* harbour/source/rdd/Makefile
+ harbour/source/rdd/dbsql.c
+ added __DBSQL() function
* harbour/include/hbsetup.h
* harbour/source/vm/fm.c
+ added support for native Windows memory allocation functions
It can be enabled by HB_FM_WIN32_ALLOC macro and disable C-RTL
memory manager.
* harbour/tests/mousetst.prg
* touch screen output before MPRESENT() to work with GTXWC
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
! fixed false warning about unreachable code in
switch ...; case ...; exit; case ...
statement
* disabled some error messages about illegal pass by reference
now HVM should not allow to create cyclic reference chain
* harbour/source/rtl/hbregex.c
+ added HB_REGEXHAS() and HB_REGEXLIKE()
* harbour/source/rtl/net.c
* added support for <nType> parameter in NETNAME() like in xHarbour
when nType == 1 NETNAME() returns user name instead of host name.
* harbour/source/rtl/tgetlist.prg
! Fixed bug #1692268. The fix simply removes two strange lines
of code which tried to modify the internal TGet() var "Type",
after it read the value contained in the TGet(). Since this would
be the job of TGet() alone, and Type() is not an assignable
var in CA-Cl*pper, it very much looks like a workaround
for something (maybe a shortcoming of an earlier version of
TGet()). If anyone knows what was to be achieved with that,
pls shout.
* harbour/include/Makefile
+ harbour/include/hbchksum.h
* harbour/source/rtl/Makefile
+ harbour/source/rtl/hbadler.c
+ harbour/source/rtl/hbcrc.c
+ harbour/source/rtl/hbmd5.c
+ added functions to calculate different checksums
HB_ADLER( <cValue> [, <nStart> ] ) -> <nCC>
HB_CRC32( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC16( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC ( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_CRCCT( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_MD5( <cString> ) -> <cMD5>
HB_MD5FILE( <cFileName> ) -> <cMD5>
HB_CRC() is general CRC function which can be used for any polynomial
given as second argument, f.e.: 0x104C11DB7 is CRC32 polynomial,
0x18005 -> CRC16, 0x11021 -> CRC16 X.26, 0x1393 -> CRC12, 0x101 -> LCR8
HB_CRCCT() makes exactly the same job but it uses broken algorithm.
Unfortunately it seems that this broken version is widely used by many
other projects, f.e. HB_CRCCT() gives exactly the same results as
COM_CRC() from CT3. Generated results are usually "good enough" but
if you do not need compatibility with some other tools which uses
broken CRC algorithm then I suggest to not use it.
HB_ADLER() is ADLER32 check sum - this function gives the same results
as HB_CHECKSUM in xHarbour.
HB_MD5*() functions are from Dmitry V. Korzhov code modified a
little bit by me for other then x86@32 machines files and buffers
longer then 2^32. I also fixed possible problems with wrong results
in some cases.
* harbour/source/compiler/hbmain.c
* increase number of optimization passes
* harbour/source/pp/ppcore.c
* cleaned C compiler warning
* harbour/source/pp/ppcore.c
+ added support for multiline string concatenated by ';'
f.e.:
cVar := "line 1;
line 2;
line 3"
To enable the above it's necessary to build PP with
HB_PP_MULTILINE_STRING macro.
It's not Clipper compatible extension and it's not enabled by default
anyhow old PP worked in such way so I'm leaving the decision to Harbour
community if the above should be enabled by default or not.
* harbour/common.mak
* updated for new files - please check
* harbour/harbour.spec
* added compiler library
* harbour/bin/pack_src.sh
* harbour/bin/hb-func.sh
* updated for new files and libraries
* harbour/config/w32/mingw32.cf
* harbour/config/w32/watcom.cf
* harbour/config/w32/xcc.cf
* added winsock libraries
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added hb_cdpicmp() - not case sensitive version of hb_cdpcmp()
* harbour/include/hbapiitm.h
* harbour/source/vm/itemapi.c
+ hb_itemStrICmp(), hb_itemCopyFromRef(), hb_itemMoveFromRef()
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbvmpub.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/macro/macrolex.c
* harbour/source/vm/Makefile
* harbour/source/vm/arrays.c
* harbour/source/vm/asort.c
* harbour/source/vm/classes.c
* harbour/source/vm/eval.c
* harbour/source/vm/garbage.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/macro.c
+ harbour/source/vm/hashes.c
+ harbour/source/vm/hashfunc.c
+ added hash items, f.e.:
local h1 := {=>}, h2 := { "a"=>1.234, "b"=>2.345 }
? h2[ "a" ], h2[ "b ]
+ added support for DYNAMIC function declaration - it allow to define
functions which are lately bound at runtime, f.e.:
/*** t01.prg ***/
dynamic func1
proc main()
local h:=__hrbload("t02.hrb")
? func1()
return
/*** t02.prg ***/
func func1
return "Hello!!!"
% use new FUNCALL structure to hold EXTERNAL and DYNAMIC functions,
it reduce memory usage, FUNCALL is much smaller then FUNCTION
% use symbol scope bits when possible instead of making some linear scan
+ added new enumarator message: __ENUMKEY - it allow to access
key value when hash item is base enumerator value, f.e.:
proc main()
local v, h:={"a"=>1.000,"b"=>2.000,"c"=>3.000}
heval( h, { |k,v,i| qout( k, v, i ) } ); ?
for each v in h
? v, "=>", v:__enumKey(), v:__enumValue(), v:__enumIndex(), ;
valtype(v:__enumBase())
v += 0.123
next
? ;heval( h, { |k,v,i| qout( k, v, i ) } )
return
+ added C level hb_hash*() functions
+ added support for full HASH item cloning and updated array cloning
to also clone nested hashes - please note that xHarbour does not do
that, in xHarbour ACLONE() clones _ONLY_ nested arrays and HCLONE()
_DOES_NOT_ clone _ANY_ nested items.
* harbour/include/hbextern.ch
+ added hash functions HB_H*()
* changed INET*() functions to HB_INET*()
+ added hash functions H*() and socket functions INET*() when
HB_COMPAT_XHB is set
* harbour/include/hbtypes.h
+ added missing HB_EXTERN_BEGIN / HB_EXTERN_END
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
! added protection against automatic word concatenation in some cases
! fixed preprocessing expressions when match marker matches ';' token
* harbour/source/rtl/Makefile
+ harbour/source/rtl/itemseri.c
+ added functions for item serialization: HB_SERIALIZE() and
HB_DESERIALIZE() - these function are not binary compatible
with xHarbour functions with the same names but make very
similar job with the exception to serialization of codeblock
and object variables - Harbour does not allow to serialize
codeblocks and serialize objects as arrays.
In most cases these functions can replace the xHarbour ones
+ added HB_DESERIALBEGIN() and HB_DESERIALIZE() functions covered
by HB_COMPAT_XHB macro - this functions are only for compatibility
with existing xHarbour code, In Harbour HB_DESERIALBEGIN() is
dummy function which returns first parameter and HB_DESERIALNEXT()
is a simple wrapper to HB_DESERIALIZE() so it's not necessary to
use them.
* harbour/source/rtl/hbinet.c
* changed INET*() functions to HB_INET*() and enable them for default
build
+ added INET*() functions wrappers covered by HB_COMPAT_XHB macro
* harbour/source/rtl/hbrandom.c
+ added HB_RANDOMINT() - xHarbour compatible
* harbour/source/rtl/len.c
+ added support for HASHes
* harbour/source/rtl/valtype.c
+ added support for HASHes
+ added set of HB_IS*() functions - they are a little bit faster then
calling VALTYPE( v ) == <cVal>
- removed HB_ISBYREF() - this function cannot longer work, it was using
a Clipper incompatible anomalies in passing variables by reference I
fixed so it has to stop to work. If it will be realy necessary to
implement HB_ISBYREF() function then please inform me - it will have
to be done at compiler level or with some much deeper HVM stack
checking.
* harbour/source/vm/extend.c
! fixed hb_extIsArray() and hb_extIsObject() to work well with
parameters passed by reference.
Please note that now hb_extIsArray() return TRUE only for pure arrays
not object values.
* harbour/contrib/Makefile
+ harbour/contrib/tip/Changelog
+ harbour/contrib/tip/Makefile
+ harbour/contrib/tip/atokens.c
+ harbour/contrib/tip/base64x.c
+ harbour/contrib/tip/cgi.prg
+ harbour/contrib/tip/client.prg
+ harbour/contrib/tip/credent.prg
+ harbour/contrib/tip/cstr.prg
+ harbour/contrib/tip/encb64.prg
+ harbour/contrib/tip/encmthd.c
+ harbour/contrib/tip/encoder.prg
+ harbour/contrib/tip/encqp.prg
+ harbour/contrib/tip/encurl.prg
+ harbour/contrib/tip/ftpcln.prg
+ harbour/contrib/tip/hbhex2n.c
+ harbour/contrib/tip/httpcln.prg
+ harbour/contrib/tip/mail.prg
+ harbour/contrib/tip/popcln.prg
+ harbour/contrib/tip/smtpcln.prg
+ harbour/contrib/tip/tip.ch
+ harbour/contrib/tip/url.prg
+ harbour/contrib/tip/utils.c
+ added TIP library - code borrowed from xHarbour
Please test - a lot of above code is not well tested, also some peaces
were written over year ago for different things (f.e. serialization for
NETRDD) and now I collected them and committed.
The TIP library was not tested at all. It can be compiled but I cannot
say if it works - I hope that people familiar with it can make necessary
test and fixes.
It's also not the final version of low level HASH item code. I'm working
on more efficient structure which uses binary tries but I cannot say when
I'll finish it (maybe in this weekend or maybe in next year) so I committed
working version now even if I'm not happy with overall performance (BTW
not worser then in xHarbour)
* harbour/include/hbapi.h
* harbour/include/hbapiitm.h
* harbour/source/vm/garbage.c
* harbour/source/vm/extend.c
* harbour/source/vm/itemapi.c
+ added hb_gcFunc(), hb_parptrGC(), hb_itemGetPtrGC()
hb_parptrGC() and hb_itemGetPtrGC() uses GC cleanup function address
to validate if pointer item points to expected memory block type
* harbour/source/common/hbhash.c
* harbour/source/compiler/hbident.c
* formatting and minor modifications
* harbour/source/pp/pplib.c
* harbour/source/pp/pplib2.c
* use hb_parptrGC() to be sure that given pointer item points
to PP structure
+ harbour/include/hbregex.h
+ harbour/source/rtl/hbregex.c
* harbour/source/rtl/Makefile
* harbour/common.mak
+ added support for regular expressions. Now it's enabled by default
only in *nixes (POSIX regex) and BCC 5.5 (PCRE regex). Setting
HB_PCRE_REGEX macro enables Perl-Compatible Regular Expressions
and HB_POSIX_REGEX - POSIX regular expressions. In xHarbour regex
support is enabled for all builds because PCRE source code is stored
in CVS. If you will want we can make the same.
+ the following C functions are available:
hb_regexCompile(), hb_regexGet(), hb_regexFree(), hb_regexMatch()
+ the following PGR functions are available:
HB_REGEXCOMP(), HB_ISREGEX(), HB_ATX(), HB_REGEX(), HB_REGEXMATCH(),
HB_REGEXSPLIT(), HB_REGEXATX(), HB_REGEXALL()
They are working in similar way to the ones in xHarbour with the
exception to some bug fixes and form of compiled regular expression.
In Harbour it's pointer item for which HB_ISREGEX() returns TRUE when
in xHarbour it's binary string.
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
* enabled code to seek in index using regular expressions
(DBOI_SKIPREGEX[BACK])
* harbour/include/hbexpra.c
* emulate xHarbour HB_ENUMINDEX() inside FOR EACH loop when
HB_COMPAT_XHB macro is set
It's only for compatibility - I strongly suggest to use
<unumvar>:__enumIndex()
which is more flexible and allow to chose the enumerator
variable not only the one from last loop
* harbour/include/hbexprb.c
* added comment removed from hbexpra.c
* harbour/source/compiler/hbmain.c
! fixed GPF which can appear when -b option is used in line numbering
inside codeblocks
* harbour/include/hbexpra.c
* emulate xHarbour HB_ENUMINDEX() inside FOR EACH loop when
HB_COMPAT_XHB macro is set
It's only for compatibility - I strongly suggest to use
<unumvar>:__enumIndex()
which is more flexible and allow to chose the enumerator
variable not only the one from last loop
* harbour/include/hbexprb.c
* added comment removed from hbexpra.c
* harbour/source/compiler/hbmain.c
! fixed GPF which can appear when -b option is used in line numbering
inside codeblocks
* harbour/common.mak
* harbour/makefile.bc
* harbour/makefile.vc
* harbour/bin/hb-func.sh
* harbour/config/global.cf
* harbour/include/error.ch
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
- harbour/include/hbexprc.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/source/Makefile
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/compiler/Makefile
- harbour/source/compiler/exproptc.c
- harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbcomp.c
* harbour/source/compiler/hbgenerr.c
+ harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbpcode.c
* harbour/source/macro/Makefile
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
- harbour/source/macro/macroc.c
+ harbour/source/main/Makefile
+ harbour/source/main/harbour.c
* harbour/source/vm/macro.c
* resolved name conflicts between compiler and macro compiler.
Now new compiler library is created.
There are some things which can be improved and cleaned yet
but it's enough to create single binaries with compiler+HVM+RTLs.
I updated non GNU make files but I cannot tested the modifications
- please check and fix me if necessary
