* harbour/source/rtl/hbinet.c
! Warnings fixed for Darwin (gcc 4.0.1 OSX 10.4.9 PPC)
* harbour/source/rtl/idle.c
! Fixed releasing idle CPU cycles. (thanks Przemek)
The committed method was tested against usleep( 1 )
and usleep( 100 ) and found to work perfect as
opposed to the usleep() calls.
* harbour/source/rtl/tget.prg
! Adjusted my old TOFIX note.
* harbour/include/hbcompat.ch
* always translate hash H*() function to HB_H*() ones even if
HB_COMPAT_XHB is set. Code which uses HB_H*() functions can
be linked with any Harbour builds
* harbour/include/hbapi.h
* harbour/source/vm/hashes.c
+ added hb_hashId()
* harbour/source/pp/ppcore.c
+ added #ytranslate, #ycommand, #yuntranslate, #yuncommand
case sensitive version of corresponding #x* directives
* harbour/source/rtl/itemseri.c
+ added support for serialization arrays and/or hashes with cyclic
references
* harbour/source/debug/debugger.prg
* removed some not longer necessary GTWVW extensions
* harbour/source/rtl/hbgtcore.c
* harbour/contrib/libct/ctwin.c
+ added support for GTI_{NEW,GET,SET}WIN in CTWIN
Now debugger can be used with CTWIN without any problems
* harbour/common.mak
* harbour/bin/pack_src.sh
* harbour/source/vm/Makefile
- harbour/source/vm/dbgentry.c
* harbour/source/debug/Makefile
+ harbour/source/debug/dbgentry.c
* moved dbgentry.c from HVM to DEBUG library
* harbour/source/rtl/hbgtcore.c
+ added basic version of GTI_{NEW,GET,SET}WIN
* harbour/include/hbapidbg.h
* harbour/source/vm/hvm.c
* harbour/source/debug/debugger.prg
* harbour/source/debug/dbgentry.c
+ added set of .prg level functions (HB_DBG_*()) to control
debugger internals
* eliminated HB_INLINE() calls
* use to switch between user and debugger screen
* cleaned debugger interface in HVM, removed unused variables
added one common debug function
* harbour/source/debug/dbgtarr.prg
! Fixed unclosed #if construct.
Question: What does HB_NO_READDBG do?
* harbour/source/rtl/tget.prg
! Removed :Assign() call from :UpdateBuffer() to close
the functionality to CA-Cl*pper.
* harbour/common.mak
* harbour/source/rtl/Makefile
+ harbour/source/rtl/valtoexp.prg
+ added HB_VALTOEXP() and HB_CSTR()
* harbour/source/debug/dbgthsh.prg
* harbour/source/debug/debugger.prg
* replaced CSTR() with HB_CSTR() and SETLASTKEY() with HB_SETLASTKEY()
now debugger can be used without CT and TIP libraries
* harbour/include/hbgtinfo.ch
* harbour/source/rtl/hbgtcore.c
+ added GTI_ISMULTIWIN, GTI_GETWIN, GTI_SETWIN, GTI_NEWWIN
and TODO note - it's not finished yet, work in progress
* harbour/source/rtl/tget.prg
! Get method UpdateBuffer() fixed to be effective only
when the object has focus (as per the C52 docs and
Lorenzo's report).
* harbour/source/debug/debugger.prg
! Fixed a few compile errors.
! Reapplied (and extended) a former fix regarding
the proper handling of the filenames.
* harbour/source/rtl/tbrowse.prg
; Cosmetic.
* harbour/include/hbapi.h
+ harbour/include/hbapidbg.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbdebug.ch
* harbour/include/hbdefs.h
* harbour/source/compiler/Makefile
* harbour/source/compiler/genc.c
+ harbour/source/compiler/hbdbginf.c
* harbour/source/compiler/hbmain.c
* harbour/source/debug/debugger.prg
* harbour/source/rtl/altd.prg
* harbour/source/vm/Makefile
+ harbour/source/vm/dbgentry.c
* harbour/source/vm/debug.c
* harbour/source/vm/hvm.c
+ added xHarbour compatible low level debugger code
Without some small exceptions like my hbdbginf.c most of
the code created by Phil Krylov <phil a t newstar.rinet.ru>
and borrowed from xHarbour with some small modifications.
* harbour/source/rtl/gete.c
! fixed memory leak in GETENV()
* harbour/source/compiler/hbmain.c
! fixed memory leak when -build or -credit switches were used
* harbour/source/rtl/persist.prg
* harbour/source/rtl/tbrowse.prg
* harbour/source/rtl/teditor.prg
% Replaced __StrT*() internal functions with native Harbour
extensions hb_Token*().
% Removed workarounds for problems with the previous implementation
of the __StrT*() functions.
Please test TEditor (all) and TBrowse class (header/footer line splitting).
* harbour/common.mak
* harbour/source/lang/Makefile
+ harbour/source/lang/msgnl.c
+ added Dutch language module by Rene Koot
* harbour/config/os2/gcc.cf
* commented out -DTCPV40HDRS in CFLAGS
* harbour/make_gnu.cmd
* added commented by default: set C_USR=-DTCPV40HDRS %C_USR%
* harbour/contrib/libnf/menu1.prg
* harbour/contrib/libnf/pegs.prg
* harbour/contrib/libnf/popadder.prg
* harbour/contrib/libnf/savesets.prg
* harbour/source/debug/dbgmenu.prg
+ added missing #include "common.ch" for HB_SYMBOL_UNUSED()
* harbour/include/hbclass.ch
* renamed __HB_SYMBOL_UNUSED() to __HB_CLS_SYMBOL_UNUSED() to keep
the same name convention as for other hbclass definitions/commands
* harbour/include/hbsetup.h
* added commented by default #define HB_PP_MULTILINE_STRING
with small description
* harbour/source/rtl/net.c
* added missing #include(s) for OS2 build
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* formatting
* harbour/contrib/tip/Makefile
- harbour/contrib/tip/atokens.c
* removed HB_ATOKENS()
- harbour/source/rtl/teditorl.c
- removed __STRTOKEN(), __STRTKPTR()
* harbour/common.mak
* harbour/source/rtl/Makefile
* harbour/include/hbextern.ch
+ harbour/source/rtl/hbtoken.c
+ added set of functions to manipulate string tokens:
HB_TOKENCOUNT( <cString>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <nTokens>
HB_TOKENGET( <cString>, <nToken>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <cToken>
HB_TOKENPTR( <cString>, @<nSkip>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <cToken>
HB_ATOKENS( <cString>, [ <cDelim> ], [ <lSkipStrings> ],
[ <lDoubleQuoteOnly> ] ) -> <aTokens>
All these functions use the same method of tokenization. They can
accept as delimiters string longer then one character. By default
they are using " " as delimiter. " " delimiter has special mening
Unlike other delimiters repeted ' ' characters does not create empty
tokens, f.e.: HB_ATOKENS( " 1 2 3 " ) returns array { "1", "2" }
Any other delimiters are restrictly counted, f.e. HB_ATOKENS( ",,1,,2,")
return array: { "", "", "1", "", "2", "" }.
+ added emulation for old __STRTOKEN(), __STRTKPTR() and xHarbour's
__STRTOKENCOUNT() by HB_TOKEN*() functions. They do not return
exactly the same result as __STRT*() functions which in some cases
ignored some delimiters and return wrong results.
* harbour/source/rdd/Makefile
+ harbour/source/rdd/dbsql.c
+ added __DBSQL() function
* harbour/include/hbsetup.h
* harbour/source/vm/fm.c
+ added support for native Windows memory allocation functions
It can be enabled by HB_FM_WIN32_ALLOC macro and disable C-RTL
memory manager.
* harbour/tests/mousetst.prg
* touch screen output before MPRESENT() to work with GTXWC
* harbour/source/rtl/hbregex.c
+ added HB_REGEXHAS() and HB_REGEXLIKE()
* harbour/source/rtl/net.c
* added support for <nType> parameter in NETNAME() like in xHarbour
when nType == 1 NETNAME() returns user name instead of host name.
* harbour/source/rtl/tgetlist.prg
! Fixed bug #1692268. The fix simply removes two strange lines
of code which tried to modify the internal TGet() var "Type",
after it read the value contained in the TGet(). Since this would
be the job of TGet() alone, and Type() is not an assignable
var in CA-Cl*pper, it very much looks like a workaround
for something (maybe a shortcoming of an earlier version of
TGet()). If anyone knows what was to be achieved with that,
pls shout.
* harbour/include/Makefile
+ harbour/include/hbchksum.h
* harbour/source/rtl/Makefile
+ harbour/source/rtl/hbadler.c
+ harbour/source/rtl/hbcrc.c
+ harbour/source/rtl/hbmd5.c
+ added functions to calculate different checksums
HB_ADLER( <cValue> [, <nStart> ] ) -> <nCC>
HB_CRC32( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC16( <cValue> [, <nStart> ] ) -> <nCRC>
HB_CRC ( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_CRCCT( <cValue> [, <nStart> ] [, <nPolynomial> ] ) -> <nCRC>
HB_MD5( <cString> ) -> <cMD5>
HB_MD5FILE( <cFileName> ) -> <cMD5>
HB_CRC() is general CRC function which can be used for any polynomial
given as second argument, f.e.: 0x104C11DB7 is CRC32 polynomial,
0x18005 -> CRC16, 0x11021 -> CRC16 X.26, 0x1393 -> CRC12, 0x101 -> LCR8
HB_CRCCT() makes exactly the same job but it uses broken algorithm.
Unfortunately it seems that this broken version is widely used by many
other projects, f.e. HB_CRCCT() gives exactly the same results as
COM_CRC() from CT3. Generated results are usually "good enough" but
if you do not need compatibility with some other tools which uses
broken CRC algorithm then I suggest to not use it.
HB_ADLER() is ADLER32 check sum - this function gives the same results
as HB_CHECKSUM in xHarbour.
HB_MD5*() functions are from Dmitry V. Korzhov code modified a
little bit by me for other then x86@32 machines files and buffers
longer then 2^32. I also fixed possible problems with wrong results
in some cases.
* harbour/source/compiler/hbmain.c
* increase number of optimization passes
* harbour/source/pp/ppcore.c
* cleaned C compiler warning
* harbour/common.mak
* updated for new files - please check
* harbour/harbour.spec
* added compiler library
* harbour/bin/pack_src.sh
* harbour/bin/hb-func.sh
* updated for new files and libraries
* harbour/config/w32/mingw32.cf
* harbour/config/w32/watcom.cf
* harbour/config/w32/xcc.cf
* added winsock libraries
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added hb_cdpicmp() - not case sensitive version of hb_cdpcmp()
* harbour/include/hbapiitm.h
* harbour/source/vm/itemapi.c
+ hb_itemStrICmp(), hb_itemCopyFromRef(), hb_itemMoveFromRef()
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprop.h
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbvmpub.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencli.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbmain.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/macro/macro.yyh
* harbour/source/macro/macrolex.c
* harbour/source/vm/Makefile
* harbour/source/vm/arrays.c
* harbour/source/vm/asort.c
* harbour/source/vm/classes.c
* harbour/source/vm/eval.c
* harbour/source/vm/garbage.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
* harbour/source/vm/macro.c
+ harbour/source/vm/hashes.c
+ harbour/source/vm/hashfunc.c
+ added hash items, f.e.:
local h1 := {=>}, h2 := { "a"=>1.234, "b"=>2.345 }
? h2[ "a" ], h2[ "b ]
+ added support for DYNAMIC function declaration - it allow to define
functions which are lately bound at runtime, f.e.:
/*** t01.prg ***/
dynamic func1
proc main()
local h:=__hrbload("t02.hrb")
? func1()
return
/*** t02.prg ***/
func func1
return "Hello!!!"
% use new FUNCALL structure to hold EXTERNAL and DYNAMIC functions,
it reduce memory usage, FUNCALL is much smaller then FUNCTION
% use symbol scope bits when possible instead of making some linear scan
+ added new enumarator message: __ENUMKEY - it allow to access
key value when hash item is base enumerator value, f.e.:
proc main()
local v, h:={"a"=>1.000,"b"=>2.000,"c"=>3.000}
heval( h, { |k,v,i| qout( k, v, i ) } ); ?
for each v in h
? v, "=>", v:__enumKey(), v:__enumValue(), v:__enumIndex(), ;
valtype(v:__enumBase())
v += 0.123
next
? ;heval( h, { |k,v,i| qout( k, v, i ) } )
return
+ added C level hb_hash*() functions
+ added support for full HASH item cloning and updated array cloning
to also clone nested hashes - please note that xHarbour does not do
that, in xHarbour ACLONE() clones _ONLY_ nested arrays and HCLONE()
_DOES_NOT_ clone _ANY_ nested items.
* harbour/include/hbextern.ch
+ added hash functions HB_H*()
* changed INET*() functions to HB_INET*()
+ added hash functions H*() and socket functions INET*() when
HB_COMPAT_XHB is set
* harbour/include/hbtypes.h
+ added missing HB_EXTERN_BEGIN / HB_EXTERN_END
* harbour/include/hbpp.h
* harbour/source/pp/ppcore.c
! added protection against automatic word concatenation in some cases
! fixed preprocessing expressions when match marker matches ';' token
* harbour/source/rtl/Makefile
+ harbour/source/rtl/itemseri.c
+ added functions for item serialization: HB_SERIALIZE() and
HB_DESERIALIZE() - these function are not binary compatible
with xHarbour functions with the same names but make very
similar job with the exception to serialization of codeblock
and object variables - Harbour does not allow to serialize
codeblocks and serialize objects as arrays.
In most cases these functions can replace the xHarbour ones
+ added HB_DESERIALBEGIN() and HB_DESERIALIZE() functions covered
by HB_COMPAT_XHB macro - this functions are only for compatibility
with existing xHarbour code, In Harbour HB_DESERIALBEGIN() is
dummy function which returns first parameter and HB_DESERIALNEXT()
is a simple wrapper to HB_DESERIALIZE() so it's not necessary to
use them.
* harbour/source/rtl/hbinet.c
* changed INET*() functions to HB_INET*() and enable them for default
build
+ added INET*() functions wrappers covered by HB_COMPAT_XHB macro
* harbour/source/rtl/hbrandom.c
+ added HB_RANDOMINT() - xHarbour compatible
* harbour/source/rtl/len.c
+ added support for HASHes
* harbour/source/rtl/valtype.c
+ added support for HASHes
+ added set of HB_IS*() functions - they are a little bit faster then
calling VALTYPE( v ) == <cVal>
- removed HB_ISBYREF() - this function cannot longer work, it was using
a Clipper incompatible anomalies in passing variables by reference I
fixed so it has to stop to work. If it will be realy necessary to
implement HB_ISBYREF() function then please inform me - it will have
to be done at compiler level or with some much deeper HVM stack
checking.
* harbour/source/vm/extend.c
! fixed hb_extIsArray() and hb_extIsObject() to work well with
parameters passed by reference.
Please note that now hb_extIsArray() return TRUE only for pure arrays
not object values.
* harbour/contrib/Makefile
+ harbour/contrib/tip/Changelog
+ harbour/contrib/tip/Makefile
+ harbour/contrib/tip/atokens.c
+ harbour/contrib/tip/base64x.c
+ harbour/contrib/tip/cgi.prg
+ harbour/contrib/tip/client.prg
+ harbour/contrib/tip/credent.prg
+ harbour/contrib/tip/cstr.prg
+ harbour/contrib/tip/encb64.prg
+ harbour/contrib/tip/encmthd.c
+ harbour/contrib/tip/encoder.prg
+ harbour/contrib/tip/encqp.prg
+ harbour/contrib/tip/encurl.prg
+ harbour/contrib/tip/ftpcln.prg
+ harbour/contrib/tip/hbhex2n.c
+ harbour/contrib/tip/httpcln.prg
+ harbour/contrib/tip/mail.prg
+ harbour/contrib/tip/popcln.prg
+ harbour/contrib/tip/smtpcln.prg
+ harbour/contrib/tip/tip.ch
+ harbour/contrib/tip/url.prg
+ harbour/contrib/tip/utils.c
+ added TIP library - code borrowed from xHarbour
Please test - a lot of above code is not well tested, also some peaces
were written over year ago for different things (f.e. serialization for
NETRDD) and now I collected them and committed.
The TIP library was not tested at all. It can be compiled but I cannot
say if it works - I hope that people familiar with it can make necessary
test and fixes.
It's also not the final version of low level HASH item code. I'm working
on more efficient structure which uses binary tries but I cannot say when
I'll finish it (maybe in this weekend or maybe in next year) so I committed
working version now even if I'm not happy with overall performance (BTW
not worser then in xHarbour)
* harbour/include/hbapi.h
* harbour/include/hbapiitm.h
* harbour/source/vm/garbage.c
* harbour/source/vm/extend.c
* harbour/source/vm/itemapi.c
+ added hb_gcFunc(), hb_parptrGC(), hb_itemGetPtrGC()
hb_parptrGC() and hb_itemGetPtrGC() uses GC cleanup function address
to validate if pointer item points to expected memory block type
* harbour/source/common/hbhash.c
* harbour/source/compiler/hbident.c
* formatting and minor modifications
* harbour/source/pp/pplib.c
* harbour/source/pp/pplib2.c
* use hb_parptrGC() to be sure that given pointer item points
to PP structure
+ harbour/include/hbregex.h
+ harbour/source/rtl/hbregex.c
* harbour/source/rtl/Makefile
* harbour/common.mak
+ added support for regular expressions. Now it's enabled by default
only in *nixes (POSIX regex) and BCC 5.5 (PCRE regex). Setting
HB_PCRE_REGEX macro enables Perl-Compatible Regular Expressions
and HB_POSIX_REGEX - POSIX regular expressions. In xHarbour regex
support is enabled for all builds because PCRE source code is stored
in CVS. If you will want we can make the same.
+ the following C functions are available:
hb_regexCompile(), hb_regexGet(), hb_regexFree(), hb_regexMatch()
+ the following PGR functions are available:
HB_REGEXCOMP(), HB_ISREGEX(), HB_ATX(), HB_REGEX(), HB_REGEXMATCH(),
HB_REGEXSPLIT(), HB_REGEXATX(), HB_REGEXALL()
They are working in similar way to the ones in xHarbour with the
exception to some bug fixes and form of compiled regular expression.
In Harbour it's pointer item for which HB_ISREGEX() returns TRUE when
in xHarbour it's binary string.
* harbour/source/rdd/dbfcdx/dbfcdx1.c
* harbour/source/rdd/dbfntx/dbfntx1.c
* enabled code to seek in index using regular expressions
(DBOI_SKIPREGEX[BACK])
* harbour/include/hbcomp.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbmacro.h
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/hbdate.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbopt.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/rtl/abs.c
* harbour/source/rtl/at.c
* harbour/source/rtl/chrasc.c
* harbour/source/rtl/datec.c
* harbour/source/rtl/dateshb.c
* harbour/source/rtl/diskspac.c
* harbour/source/rtl/disksphb.c
* harbour/source/rtl/gtfunc.c
* harbour/source/rtl/left.c
* harbour/source/rtl/len.c
* harbour/source/rtl/math.c
* harbour/source/rtl/minmax.c
* harbour/source/rtl/mod.c
* harbour/source/rtl/philes.c
* harbour/source/rtl/philesx.c
* harbour/source/rtl/replic.c
* harbour/source/rtl/round.c
* harbour/source/rtl/set.c
* harbour/source/rtl/space.c
* harbour/source/rtl/strcase.c
* harbour/source/rtl/strpeek.c
* harbour/source/rtl/transfrm.c
* harbour/source/rtl/trim.c
* harbour/source/rtl/type.c
* harbour/source/rtl/val.c
* harbour/source/rtl/word.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* added some PCODEs to cover all possible combination of ++, --, <op>=
operations in the same way and keep Clipper compatible RT errors.
* added some other PCODEs to optimize some commonly used expressions/
statements
* use HB_ERR_ARGS_BASEPARAMS instead of hb_paramError()
* some other cleanups and minor optimizations
* harbour/utils/hbtest/rt_math.prg
* update expected result for MOD() - it was not Clipper compatible and
it will be hard to make it compatible without introducing some Clipper's
side effects
* harbour/bin/hb-func.sh
* do not pass linking parameters to GCC/G++ when is used for
compilation only
* harbour/contrib/rdd_ads/Makefile
* set -DWIN32 for W32 compilation
* harbour/contrib/rdd_ads/makefile.bc
* formatting
* harbour/include/hbapi.h
* harbour/source/rtl/strcase.c
+ added hb_charUpper() and hb_charLower()
* harbour/include/hbapigt.h
* harbour/include/hbgtcore.h
* harbour/source/rtl/gtapi.c
* harbour/source/rtl/hbgtcore.c
+ added support for ALERT() on GT level - C functions: hb_gtAlert()/
hb_gt_Alert()
To replicate some details of Clipper and CT3 behavior ALERT() cannot
be implement only on upper level as .prg function
* harbour/source/rtl/gtfunc.c
+ added .prg function HB_GTALLERT()
* harbour/source/rtl/alert.prg
* redirected ALERT() to HB_GTALLERT()
* harbour/source/rtl/fstemp.c
* use the same case conversion as in low level hb_fs*() functions to
avoid possible problems with national characters
* harbour/source/rtl/dates.c
* harbour/source/rtl/set.c
* harbour/source/rtl/strmatch.c
* harbour/source/rtl/transfrm.c
* use hb_charUpper()
* casting
* harbour/source/rtl/isprint.c
* harbour/include/hbapi.h
! hb_printerIsReady() C level function made public again.
+ Added proper declaration for it.
* harbour/bin/bld.bat
! Mistakenly committed change undone.
* harbour/include/hbgtinfo.ch
* harbour/contrib/libct/ctwin.c
* harbour/source/rtl/gtalleg/gtalleg.c
* harbour/source/rtl/gtcrs/gtcrs.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* harbour/source/rtl/gtwvt/gtwvt.c
* harbour/source/rtl/gtxwc/gtxwc.c
+ added support for GTI_FULLSCREEN, GTI_KBDSUPPORT, GTI_ISCTWIN
* harbour/source/rtl/hbgtcore.c
! fixed line and box drawing when the coordinates are out of screen size
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbpcode.h
* harbour/include/hbstack.h
* harbour/include/hbvm.h
* harbour/include/hbxvm.h
* harbour/source/compiler/complex.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/harbour.yyh
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/classes.c
* harbour/source/vm/estack.c
* harbour/source/vm/hvm.c
* harbour/source/vm/itemapi.c
! added protection against cyclic references in arrays
* eliminated action parameter from hb_vmRequestReenter() /
hb_vmRequestRestore()
* moved s_lRecoverBase and s_uiActionRequest to HB_STACK structure
for future MT HVM version
+ added internal item structure hb_struRecover - it's not real item
but this structure is used to keep information about BEGIN SEQUENCE
data - it reduce HB_STACK usage
+ added support for ALWAYS clause in BEGIN SEQUENCE
The syntax is:
BEGIN SEQUENCE
<code>
[ RECOVER [ USING oErr ] ]
<recoverCode>
[ ALWAYS ]
<alwaysCode>
END [ SEQUENCE ]
It's guaranteed that <alwaysCode> is _ALWAYS_ executed even if
inside <code> or <recoverCode> some new exceptions like RETURN,
BREAK or QUIT will appear.
Please note that when the following code is executed:
BEGIN SEQUENCE
<code>
ALWAYS
<alwaysCode>
END
(without RECOVER clause) then BREAK exception inside <code> is not
recovered, <alwaysCode> is executed and then BREAK exception is
passed to outer BEGIN SEQUENCE. This is the same semantic as
used in TRY / [ CATCH ] / FINALLY / END
Those of you who prefer to use TRY / CATCH / FINALLY / END instead
of BEGIN SEQUENCE / RECOVER / ALWAYS / END can simply add to your
source code:
#command TRY => BEGIN SEQUENCE
#command CATCH [ oErr ] => RECOVER [ USING <oErr> ]
and:
errorBlock( {|oErr| break( oErr ) } )
Though instead of 'break( oErr )' I suggest to use some small function
which will support some basic recovery/substitute operations like in
default errorsys() and LockErrHandler() to not break existing code
which may depends on the default behavior.
If you want I can add direct support for TRY / CATCH / FINALLY / END
but I'm not sure it's really necessary.
Please note also that in Harbour ALWAYS code is execute even for QUIT
excpetion.
When <alwaysCode> is executed current exception is stored and restored
when is finished. If new exception appears inside <alwaysCode> then
restored exception depends on the priority in the following order:
QUIT // highest priority
BREAK
RETURN
If both exceptions have the same priority and contain additional value
(error object in BREAK or return value in RETURN) then the recently set
one is restored. It's similar behavior to destructor code.
* harbour/source/common/hbstr.c
* moved one character length string table (hb_szAscii) from hvm.c
to use it also in compiler and preprocessor
* harbour/source/compiler/ppcomp.c
* harbour/source/pp/ppcore.c
* harbour/source/pp/pplib.c
* tuned error messages to be more Clipper compatible
% use static strings from hb_szAscii
* harbour/source/rtl/alert.prg
* use hb_gtInfo( GTI_FULLSCREEN ) to detect type of GT driver
! some minor fixes
TOFIX: we have to also use GTI_ISCTWIN or add window allocation
to standard GT drivers to be Clipper compatible when CTWIN
is used - In Clipper Tools ALERT() works in differ way then
the standard one. It creates separate window box to display
data, supports SETKEY(), etc. I'll think about adding some
extended support for ALERT() and similar operations (f.e.
separate debugger windows) to GT API so it will be also
possible to overload standard alert() command by GUI message
box in GTGUI and similar GT drivers.
* harbour/source/rtl/binnumx.c
! fixed U2BIN() - wrong casting
* harbour/contrib/rdd_ads/adsfunc.c
* harbour/source/rdd/workarea.c
* formatting
* harbour/include/hbapi.h
* harbour/source/vm/extend.c
+ added missing hb_storptrGC()
* harbour/include/hbapicdp.h
* harbour/source/rtl/cdpapi.c
+ added parameter to unicode translation function to protect control
code translation
* formatting
* harbour/source/rtl/gtsln/kbsln.c
* harbour/source/rtl/gtxwc/gtxwc.c
* use new unicode translation function format. It also fixes problem
with space translation in GTLSN used in UTF8 mode
* harbour/include/hbapiitm.h
* harbour/source/vm/itemapi.c
+ added hb_itemCopyToRef(), hb_itemMoveToRef(), hb_itemMoveRef(),
hb_itemUnRefWrite()
* harbour/include/hbexprb.c
! use HB_P_DUPLUNREF instead of HB_P_DUPLICATE when assign is used in
push context - Clipper compatible behavior, see:
x:=10
f(y:=iif(.t.,@x,))
? x, y
func f(x)
x+=100
return nil
* harbour/include/hbver.h
* harbour/source/common/hbver.c
* changed status to "devel"
* harbour/source/common/expropt2.c
* disabled setting NIL when iif(.t.,,sth()) is optimized to avoid
warning when iif() is used as statement - to fix number of parameters
passed to function in code like f(iif(.t.,,sth())) we will need a
little bit deeper modification
* harbour/source/compiler/complex.c
* added hack for potential problems caused by WITH OBJECT syntax, f.e.
in code like:
proc p(obj,x)
case:=myCaseClass():new()
retu:=myCaseClass():new()
WITH OBJECT obj
do case
case x==nil
case:value()
case:action()
retu:sth()
end
END
case:action()
retu:sth()
return
case:action(), case:value(), retu:sth() can means two different things
and compiler cannot guess which one should use. It cannot be fixed
because it's caused by bad WITH OBJECT syntax. In xHarbour constractions
like case:value() or retu:sth() are always used as in WITH OBJECT
context what is not Clipper compatible. I do not want to introduce
such limitations. We have two choices: change WITH OBJECT syntax or
add some hack to "hide" the problem a little bit. Now I intorduce
ugly hack which check number of spaces between ':' so
case :action()
is compiled as case condition using WITH OBJECT message and
case:action() as sending message to object in case variable
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
+ added support for passing base value to FOR EACH by reference.
* harbour/source/vm/arrays.c
* use hb_itemMoveRef() in AINS()/ADEL() to avoid creation of cyclic
reference chains
* harbour/source/vm/debug.c
* harbour/source/vm/memvars.c
* use hb_itemCopyToRef() to avoid creation of cyclic reference chains
* harbour/source/vm/classes.c
* harbour/source/vm/hvm.c
* use hb_itemMoveToRef() to avoid creation of cyclic reference chains
+ added support for for writable string enumerators, f.e.:
proc main()
local s, c
s:="abcdefghijklmnopqrst"
for each c in @s
if c$"aeio"
c:="*"
endif
next
? s // "*bcd*fgh*jklmn*pqrst"
return
* harbour/include/hbexprb.c
* make function call optimizations only when hb_compFunCallCheck()
do not report errors
* harbour/source/common/reserved.c
+ added VALTYPE to list of reserved words and shortcuts (Clipper
compatible)
* harbour/source/compiler/hbfunchk.c
* checking for number of parameters in FILE() function call is Harbour
extension - do not enable it when HB_C52_STRICT macro is set
* harbour/source/rtl/filehb.c
* formatting
* harbour/include/hbcompdf.h
+ added comment
* harbour/include/hbexpra.c
* change expression type for <exp> = <exp> from HB_EO_EQUAL
to HB_EO_ASSIGN in hb_compExprGenStatement() function so
later we can safely make all optimization in hb_compExprUseEqual()
during reduce process - optimization only when PCODE is generated
is too late and causes that expressions like:
iif( 1 = 1, <exp>, <exp> )
are not reduces (Clipper reduce them)
* do not execute hb_compFunCallCheck() in hb_compExprNewFunCall()
to avoid repeating the same error message in hb_compExprUseFunCall()
* harbour/include/hbexprb.c
* enabled reduction for hb_compExprUseEqual() and generate errors
when it's used as statement
* harbour/source/common/expropt2.c
* added some missing reductions for expressions like: NIL == NIL
* harbour/source/common/reserved.c
% very basic optimization: use binary search instead of linear
scanning for reserved words and shortcuts - it gives noticeable
speed improvement in macro compiler
* harbour/source/compiler/complex.c
* changed the order of special keywords to keep alphabetic sorting
* harbour/source/compiler/harbour.c
% some minor optimizations in aliased expressions
! added protection in hb_compIsJump() to avoid possible problems
when this function is executed after replacing some code with
jumps by series of NOOPs in optimizations process
* harbour/source/compiler/hbfix.c
* better optimization of PCODE generated for logical expressions
* harbour/source/compiler/hbfunchk.c
% use binary search instead of linear scan
* harbour/source/rtl/minmax.c
! fixed GPF when MIN() or MAX() function is called with less then
two parameters
* harbour/source/vm/itemapi.c
* minor optimization and formatting
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/hvm.c
+ added support for passing optional parameters to called function, f.e.:
proc p( a, b, ... )
qout( a, b, "X", ... )
* forbid creating function pointer when function is used with parameters,
f.e.: x:=@f1(1,2,3)
* harbour/source/compiler/complex.c
* cleaned all restrictions on reserved words I've found - if I missed
sth then please inform me. The previous behavior and some error
messages are used with -kc compiler switch
* harbour/source/rtl/symbol.prg
* harbour/source/rtl/tobject.prg
! eliminated limitations in number of constructor parameters
(new syntax with passing optional parameters used)
* harbour/config/w32/bcc32.cf
* cleanup
+ harbour/config/w32/xcc.cf
+ added XCC support
* harbour/contrib/btree/hb_btree.c
* use hb_vmAtInit()/hb_vmAtExit() instead of INIT/EXIT functions defined
from C code
* harbour/contrib/libct/tab.c
* casting
* harbour/contrib/odbc/odbc.c
! removed #include <malloc.h> - it should not be used with new C
compilers
I think that we should replace this library with hbodbc from xHarbour.
* harbour/contrib/ole/ole2.c
* updated for XCC
* harbour/include/hbdefs.h
* include stdint.h if available
* harbour/source/compiler/complex.c
! fixed yet another stupid mistake in WITHOBJECT token
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/vm/hvm.c
+ added HB_P_SWAP <n> PCODE
* harbour/include/hbcompdf.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbexprop.h
! fixed GPF during compilation of @:var, @:&var, @o:&var
+ added support for @o:&var and @:var, @:&var inside WITH OBJECT
statement
* changed PCODE generated of ++,--,+=,-=,...
Now left side expression is evaluated _ONLY_ once and when object
messages are used it's guarantied that exactly the same object
variable will be used. It also fixes some problems which exists
in Clipper. This optimization is enabled by -kh flag (by default)
and can be disabled with -kc.
% optimize ald macros in ++,--,+=,-=,... operations
* add automatically "_" prefix when macro message is used in assignment
context, f.e.:
s:="osCode"
o:=errorNew()
? o:&s
o:&s := 100
? ++o:&s
? o:&s *= 5
* harbour/include/hblang.ch
- removed #xtranslate - this file is included by C code and some C
compiler do not like unknown directives
* harbour/utils/hbtest/rt_math.prg
+ added test code for <op>assign and (pre/post)(inc/dec)rementation,
macro messages and WITH OBJECT
* harbour/source/compiler/harbour.c
* harbour/source/rdd/dbf1.c
* harbour/source/rtl/errorapi.c
* harbour/source/rtl/hbgtcore.c
* harbour/source/rtl/gtdos/gtdos.c
* harbour/source/rtl/gtos2/gtos2.c
* harbour/source/rtl/gtpca/gtpca.c
* harbour/source/rtl/gtsln/gtsln.c
* harbour/source/rtl/gtstd/gtstd.c
* harbour/source/rtl/gtwin/gtwin.c
* casting and warning cleanup
* harbour/utils/Makefile
+ added $(HB_UTILS)
- harbour/utils/hbpp/hbpp.h
+ harbour/utils/hbpp/hbppdef.h
* harbour/utils/hbpp/hbpp.c
* harbour/utils/hbpp/hbppcomp.c
* harbour/utils/hbpp/hbppcore.c
* harbour/utils/hbpp/hbpplib.c
* harbour/utils/hbpp/hbpptbl.c
* harbour/utils/hbpp/pragma.c
* renamed hbpp.h to hbppdef.h to avoid possible conflict with hbpp.h
in include directory
* casting and warning cleanup
* harbour/include/hbapi.h
* harbour/include/hbcomp.h
* harbour/include/hbcompdf.h
* harbour/include/hbdefs.h
* harbour/include/hberrors.h
* harbour/include/hbexpra.c
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/include/hbpcode.h
* harbour/include/hbxvm.h
* harbour/source/common/expropt1.c
* harbour/source/common/expropt2.c
* harbour/source/common/hbstr.c
* harbour/source/compiler/cmdcheck.c
* harbour/source/compiler/genc.c
* harbour/source/compiler/gencc.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/harbour.c
* harbour/source/compiler/harbour.y
* harbour/source/compiler/harbour.yyc
* harbour/source/compiler/hbdead.c
* harbour/source/compiler/hbfix.c
* harbour/source/compiler/hbgenerr.c
* harbour/source/compiler/hblbl.c
* harbour/source/compiler/hbpcode.c
* harbour/source/compiler/hbstripl.c
* harbour/source/macro/macro.y
* harbour/source/macro/macro.yyc
* harbour/source/rtl/console.c
* harbour/source/rtl/isprint.c
* harbour/source/rtl/left.c
* harbour/source/rtl/right.c
* harbour/source/rtl/strtran.c
* harbour/source/vm/codebloc.c
* harbour/source/vm/hvm.c
* harbour/source/vm/macro.c
* general PCODE cleanup and address most of TODO/TOFIX notes in
source code:
! fixed GPF traps when too long string or codeblock is generatd
+ added support for 16MB codeblocks and strings
! removed macrocompiler limitation for jumps range
! fixed GPF when more then 255 local variables is used and added
support for 2^15 locals
! removed all strtok() functions
% added optimization for all +=, -=, *=, %=, ^=, **= operations
when left side of expression is variable or array item
% added optimization for all +=, -=, *=, %=, ^=, **= operations
when left side of expression is object method and updated ++, --
for new code. It's still disabled until we will not add support
for late evaluated reference items to HVM
! fixed a[++i]++ and similar operations (a[++i]*=2, ...). Now ++i is
executed only once. It's not Clipper compatible but it was in
TODO note in source code. It can be disabled by -kc option
* finished support to xHarbour like #pragma TEXTHIDDEN(1)
! fixed local add int optimization when PARAMETERS used after
optimization changed local variable number over 255
! fixed GPF trap when in HB_P_<op>EQ PCODEs when executed for
direct values
* others
! fixed problems reported by Chen
* optimized strtran(), left(), right() to not create new string copy
when the same value is returned
* harbour/source/rtl/console.c
* pacify false CG error messages - Chen Kedem modifications (sizeof(int)
in #if replaced by hardcoded 4 for compilers which does not allow to
use sizeof() in #if directives)
* harbour/TODO
- removed console.c cleanup note from TOFIX
* harbour/include/hbcomp.h
* harbour/include/hbexprb.c
* harbour/include/hbexprc.c
* harbour/source/common/expropt1.c
* minor code cleanup
* harbour/source/rtl/memoline.c
! added fix sent to me by Randy Portnoff - it's a little bit differ
then the one Randy sent to list but this one seems to be correct.
I never used this function in Clipper and made only very basic
tests. I believe that Randy make better tests and this fix will
not break some other constructions.
* harbour/config/bsd/gcc.cf
* harbour/config/darwin/gcc.cf
* harbour/config/dos/bcc16.cf
* harbour/config/dos/djgpp.cf
* harbour/config/dos/owatcom.cf
* harbour/config/dos/rsx32.cf
* harbour/config/hpux/gcc.cf
* harbour/config/linux/gcc.cf
* harbour/config/linux/owatcom.cf
* harbour/config/os2/gcc.cf
* harbour/config/os2/icc.cf
* harbour/config/sunos/gcc.cf
* harbour/config/w32/bcc32.cf
* harbour/config/w32/gcc.cf
* harbour/config/w32/mingw32.cf
* harbour/config/w32/msvc.cf
* harbour/config/w32/rsxnt.cf
* harbour/config/w32/watcom.cf
* added respecting HB_GT_DEFAULT, though it's quite possible that I'll
remove it at all soon.
* some other cleanup
* harbour/source/compiler/complex.c
! fixed wrongly replicated from FLEX lexer condition used to DECLARE.
Now they should be the same as in FLEX lexer but IMHO they are not
Clipper compatible.
* harbour/source/compiler/gencli.c
* harbour/source/compiler/gencobj.c
* harbour/source/compiler/genhrb.c
* harbour/source/compiler/genjava.c
* harbour/source/compiler/genobj32.c
* harbour/source/compiler/harbour.c
* harbour/source/rtl/hbffind.c
* harbour/source/pp/ppcore.c
* harbour/source/rdd/workarea.c
! fixed sizes of some C stack buffers and strncpy() parameters
* use hb_strn*() instead of strn*() in few places to be sure that 0
is always stored in destination buffer
* harbour/source/rtl/gtcgi/gtcgi.c
* change reported GT name from "Standard stream console" to
"Raw stream console" to make it differ then GTSTD one.
