* src/vm/extrap.c
* src/vm/dynlibhb.c
* src/common/hbgete.c
* src/common/hbffind.c
* src/common/hbver.c
* src/rtl/filesys.c
* src/rtl/diskspac.c
* src/rtl/gtos2/gtos2.c
* src/rtl/cputime.c
* src/rtl/disksphb.c
* include/hbthread.h
* contrib/hbmzip/hbmzip.c
! Fixed to setup all OS/2 INCL_* constants and
to #include os2.h by themselves, and not to rely
on Harbour headers to do this job for them.
; TODO: Do the same for dos.h.
* doc/hdr_tpl.txt
- Deleted local changelog.
! Fixes to .prg function docs
+ Update copyright year to 2010.
+ Added fact that $SEEALSO$ should be comma separated.
+ Added .c function example (far from perfect)
* examples/hbdoc2/tmplates.prg
* doc/hdr_tpl.txt
+ Added $VERSION$ tag. (pls update HBIDE. We haven't finalized
the format yet, to it's little bit premature to create
new and new parsers/generators for it yet)
* include/hbdefs.h
! Fixed to not unconditionally include OS/2 headers with
an arbitrary selection of INCL_ macros.
Now OS/2 headers will only be included if legacy types
are requested (off by default), and no INCL_ macros
are defined. This latter change may affect 3rd party
code written for OS/2, so I'm marking it INCOMPATIBLE.
* contrib/hbqt/generator/hbqtgen.prg
* contrib/hbqt/hbqt.h
* Changed to #include hbapi.h from hbqt.h. It needs it,
so this is the clean way. Changed generator to leave
out hbapi.h from each source file and refer to hbqt.h
only. (untested)
+ Added logic to #include OS/2 headers with some INCL_
macros defined, to make QT on OS/2 happy. (copied them
from the dev. list)
; TODO: Regenerate HBQT sources.
* utils/hbtest/hbtest.prg
! Cleaned old problem reported by Chen. It seems like
a feature which was never finished, and it's not even
hugely needed, so I deleted it.
* config/global.mk
+ Will now provide HB_COMP_PATH_PUB value for os2-gcc, os2-gccomf
compilers. This value can be used to manually form ld.exe
command line.
(NOTE: This may be deleted in the future, when sorting
out line-length limit problems for these compilers.
* doc/hdr_tpl.txt
! Fixed to use comma (',') separator in $SEEALSO$ section.
% Deleted '*' from each line.
* Formatting. (CamelCase for functions, uppercase for
commands, .T./.F. for logical values)
* include/hbsetup.ch
+ HB_LEGACY_OFF will also enable HB_LEGACY_TYPES_OFF.
* contrib/hbfimage/Makefile
* contrib/hbfimage/fi_winfu.c
* contrib/hbfimage/fi_wrp.c
+ Forcing HB_LEGACY_TYPES_OFF.
+ Switched to new regular kind of windows.h inclusion.
+ Enabled for *nix platforms. Now it should build w/o problems.
; New regular windows.h inclusion goes as follows:
---
/* After #include "hbapi.h", write this: */
#if defined( HB_OS_WIN )
#include <windows.h> /* or any other Windows API header you may need, in any valid order or combination. */
#endif
---
Old hacky method can now be safely deleted:
'#define HB_OS_WIN_USED' and/or
'#define HB_OS_WIN32_USED'
* contrib/hbbtree/hb_btree.c
! Cleaned '{};' to be '{}' after prev cleanup (';' -> '{};')
* doc/whatsnew.txt
+ Added section for version 2.1.0.
* harbour/src/rdd/dbfcdx/dbfcdx1.c
+ enabled automatic template order setting in Harbour SIXCDX RDD using
the same method as SIX3 SIXCDX RDD seems to use: by checking leading
character of key expression for: "sxChar(", "sxDate(", "sxNum(" and
"sxLog("
Warning: This code is enabled only for SIXCDX RDD and DBFCDX was not
modified.
* disabled RTE in SIXCDX when key add/del operation are executed
for non custom indexes and
* do not add keys with different type to template indexes in SIXCDX
RDD for strict SIX3 compatibility.
* harbour/doc/cmpopt.txt
+ added information about missing in Clipper expression optimization
in LOCAL, PRIVATE and PUBLIC variable declaration. Clipper optimize
only expressions used in STATIC declarations.
* src/common/hbtrace.c
! Formatting.
! Fixed to use HB_ISSPACE().
; NOTE/TOFIX: Anyhow I think last patch should be reverted to not manipulate
passed by user string before passing it to Windows.
Plus current anti-reentrancy logic should be changed to something
robust, as current solution drops trace messages which is a very
dangerous thing to do if we want to rely on trace output for
debugging. It's not clear what "stack overflow events" are.
* doc/codestyl.txt
! Fixed link. Thanks Vailton.
[TOMERGE 2.0]
* src/rtl/sha2.c
! Added trick to make it compile with Pelles C 6.00.6.
Without this trick Pelles C compiler exits with internal error.
* doc/whatsnew.txt
+ Added NOTE about Pelles C 6.
* doc/whatsnew.txt
+ Added text documenting whatsnew missing parts.
* utils/hbmk2/hbmk2.prg
! Potential fix to external commands when using script and called
in a loop.
* harbour-win-spec
* harbour-wce-spec
* include/hbver.h
* package/winuni/RELNOTES
* package/winuni/mpkg_win_uni.bat
* package/winuni/mpkg_win_uni.nsi
* harbour.spec
* config/global.mk
* Changed version to 2.0.0rc1 (from 2.0.0beta3)
; TODO: Please also change debian/changelog.
; Rehearsing version change, I don't plan to make binary
release of this interim version.
* doc/codestyl.txt
* Minor update.
I don't plan a full update this time, as we have a huge
amount of well formatted source code, and it's pretty
consistent too, so it's enough to peek into any one of
them for a perfect example. So if someone needs and
example, just look under src/* for both .c and .prg.
* harbour/doc/en-EN/hb_apifs.txt
* harbour/include/hbapifs.h
* harbour/src/rtl/filesys.c
* changed:
BOOL hb_fsSetDevMode( HB_FHANDLE hFileHandle, USHORT uiDevMode )
to:
int hb_fsSetDevMode( HB_FHANDLE hFileHandle, int iDevMode )
Now it returns previous mode for hFileHandle or -1 on error.
if iDevMode == 0 then it does not change device mode.
* harbour/src/rtl/philes.c
* modified HB_FSETDEVMODE() function to work with new hb_fsSetDevMode()
Current syntax is:
HB_FSETDEVMODE( <hFile> [, <nNewMode> ] ) -> <nOldMode>
It may return FD_BINARY, FD_TEXT or FS_ERROR.
* harbour/src/rtl/philes53.c
* modified FSETDEVMOD() function to work with new hb_fsSetDevMode()
It's similar to HB_FSETDEVMODE() but returns FD_BINARY instead of
FS_ERROR. Such behavior is more closer to CL53.
* harbour/src/rtl/console.c
* set also STDIN into binary mode
* contrib/rddads/adsfunc.c
* Minor cleanup.
* doc/dirstruc.txt
* utils/hbmk2/examples/contribf.hbc
* contrib/Makefile
- contrib/rddado
+ examples/rddado
+ examples/rddado/rddado.hbp
- examples/rddado/Makefile
* Moved rddado from contrib to examples area.
It's an almost working example.
* intentionally removed DOC header/footer so that hbdoc/hbdoc2 ignore this file
* please see en-EN/hbinet.txt which now replaces this file
* harbour/examples/hbdoc2/hbdoc2.prg
* removed 'merge' lines mistakenly left in
* harbour/src/rtl/cdpapi.c
* harbour/include/hbapicdp.h
+ added two new functions hb_cdpU16ToStr() and hb_cdpU16LEToStr()
* harbour/doc/xhb-diff.txt
! fixed typo in code example reported by Guy Roussin
! fixed some other typos - i.e. in detached local description
* harbour/doc/xhb-diff.txt
+ added information about Harbour and xHarbour versions described by
above text - thanks to Chen for suggestion
* small update for HBNETIO and HBMEMIO
+ harbour/doc/xhb-diff.txt
+ added text which describes most important differences between Harbour
and xHarbour with some references to Clipper and other compatible
compilers like xBase++, CLIP, FlagShip.
Many thanks to Viktor and Pritpal for updating this text.
* harbour/include/hbexprb.c
! always optimized ASC() and LEN() functions (was disabled by -kc switch).
These optimizations are not Harbour extensions - Clipper also optimize
above functions
* harbour/doc/cmpopt.txt
* updated optimization description
* harbour/doc/pp.txt
+ added information about new lexer
* harbour/src/rdd/dbfcdx/dbfcdx1.c
* removed old unused macros
* harbour/include/hbcompdf.h
* harbour/src/compiler/hbmain.c
* harbour/src/compiler/cmdcheck.c
* harbour/src/compiler/complex.c
* harbour/src/compiler/hbcomp.c
* harbour/src/compiler/gencobj.c
* harbour/src/compiler/hbusage.c
+ added support for -gd[.<destExt>] switch.
When used Harbour compiler generates also .d file with dependencies
list in the form like for make systems:
<destFile>: <sourceFiles,...>
optional .<destExt> parameter value can be used to replace default
extension in <destFile>.
Now users can generate .d files without additional overhead in the
same pass as normal compilation by simple adding -gd[.<destExt>]
switch to compilation command instead of executing harbour compiler
second time with -sm switch.
* harbour/doc/man/harbour.1
* updated man page
* harbour/utils/hbmk2/hbmk2.prg
* removed -kj switch - it's not longer necessary to improve -sm
* minor formatting
* harbour/include/hbpp.h
* harbour/include/hbcompdf.h
* harbour/src/pp/ppcore.c
* harbour/src/compiler/hbmain.c
* harbour/src/compiler/cmdcheck.c
* harbour/src/compiler/ppcomp.c
* harbour/src/compiler/hbusage.c
* harbour/doc/man/harbour.1
+ added support for new compiler switch -sm which can be used to
generate dependencies list.
* modified HB_COMPILEBUF() function to return dependencies list
instead of .HRB file body when -sm switch is used. Files in
single module are separated by spaces and modules are separated
by TABs (chr(9))
To reduce overhead I suggest to use in programs like hbmk2
together with -sm also -kj switch - it disables some time
consuming optimizations in compiler code.
* INSTALL
+ Added links to several new components.
I'd need input for bison/flex link, I didn't have any success
making these work on Windows systems.
- doc/bintools.txt
* INSTALL
* COPYING
* Content of bintools.txt moved to INSTALL and COPYING.
* bin/hb-mkimp.bat
* Minor syncing of Sed's name.
* doc/gmake.txt
- source/vm/mainpm.c
* config/os2/gcc.mk
* examples/hbdoc/examples/core_es/dirstruc.txt
- Deleted os2pm and mainpm references. It wasn't needed, so
(with OS/2 users) we decided to delete it.
- ERRATA
* doc/howtosvn.txt
* INSTALL
* bin/postinst.cmd
* bin/postinst.bat
* package/mpkg_win.nsi
* package/winuni/mpkg_win_uni.bat
* package/winuni/mpkg_win_uni.nsi
+ Replaced ERRATA file (which was never updated), with a link
to bug/feature/etc tracker link in INSTALL.
* INSTALL
* Minor improvements.
* INSTALL
* doc/bintools.txt
* os2-make.exe
! Updated OS/2 make.exe (and links in INSTALL) to make-3.81-r3
(from make-3.81-r2).
This fixes the dreaded cmdline length inducated GNU Make crashes
which made us add .mk workarounds and which created a showstopper
towards OS/2 .dll support.
Many thanks to Maurilio Longo and Andreas Buening for hunting
down and fixing the problem in OS/2 GNU Make port.
* harbour/doc/cmpopt.txt
* added information about ( "<alias>" )-> to <alias>-> compile time
optimization
* harbour/source/rtl/valtostr.c
! fixed GPF if hb_valToStr() is called without any parameters.
In such case RTE is generated.
* harbour/source/rtl/transfrm.c
! fixed GPF if transform() is called without any parameters, i.e.:
? &("transform")()
* harbour/source/vm/itemapi.c
! return "U" if hb_itemTypeStr() is called with NULL parameter
It fixed GPF when valtype() is called without any parameters, i.e.:
? &("valtype")()
NOTE: Compiler check number of parameters in some functions and
refuse to compile the code when it's wrong but such validation
does not work in macrocompiler or when function is called
indirectly like in above examples or using function symbols
so always write such functions to work with wrong number of
parameters.
* doc/bintools.txt
* config/dosecho.exe
! Restored previous version. (new one gave error on some watcom lines f.e.)
+ Added binary+source links.
* INSTALL
+ Some minor clarifications.
* 'NT system required' changed 'XP system recommended' for win hosts.
+ Added shell requirement for HB_BUILD_PKG.
% Simplified os2/watcom on linux example.
* bin/postinst.cmd
+ Some cleanup/sync with postinst.bat.
* source/Makefile
! Possible fix: Emptying DYNDIRLIST_BASE on dos targets
to save envvar space.
* source/Makefile
* config/lib.mk
+ Added gtcrs and gtsln to dynlib obj list for *nix targets.
* config/global.mk
+ Added Harbour version number to log header.
! Fixed to use short pkg name based on target platform
no host platform (=dos).
* config/bsd/gcc.mk
* config/hpux/gcc.mk
* config/darwin/icc.mk
* config/linux/icc.mk
* config/linux/sunpro.mk
* config/sunos/gcc.mk
* config/sunos/sunpro.mk
+ Added dynamic library generation to rest of targets.
; Please review, especially sunos/sunpro as it had some
.sh tricks which I couldn't replicate.
* config/bsd/global.mk
* config/hpux/global.mk
* config/darwin/global.mk
* config/linux/global.mk
* config/sunos/global.mk
! Setting DYN_PREF to 'lib'.
* config/wce/mingwarm.mk
* config/win/mingw.mk
- Disabled import libs. [They aren't necessary with mingw.]
* config/darwin/icc.mk
* Changed to use libtool instead of xiar.
(blind sync with darwin/gcc)
* config/dos/djgpp.mk
* config/common/watcom.mk
* config/win/bcc.mk
* config/os2/gcc.mk
! Fixed to use $(ECHOQUOTE) in all $(ECHO) calls.
* config/win/bcc.mk
! Fixed use fixed backslashes regardless of shell in scripts.
* config/dyn.mk
! Fixed to use $(LIB_PREF) as implib name prefix.
% Minor opt in IMP_NAME forming.
* config/rules.mk
% Readded $(HB_INC_COMPILE) to be always on cmdline, to
better balance between cmdline and envvar space. (dos)
* config/instsh.mk
% Don't display useless '! Nothing to install' message
when there was no file to install. (could happen with
mingw dynamic lib install where implib is empty because
we don't generate one).
- doc/howtobsd.txt
* doc/Makefile
* INSTALL
* Essence of the content moved to INSTALL.
* config/none.mk
+ Added support to display the reason for the "skip".
* external/sqlite3/Makefile
* contrib/gtalleg/Makefile
+ Showing the reason why the libs were skipped.
Experimental. This feature needs some more design
to be consistent and helpful, it should be done while
also standardizing our config methods.
Current internal solution is also not terribly elegant,
maybe it can be converted to a function call, but there
may other solutions too.
* doc/dirstruc.txt
* Minor update.
- doc/linux1st.txt
* doc/Makefile
* INSTALL
+ Moved linux1st.txt content to INSTALL.
* utils/hbmk2/hbmk2.prg
* config/global.mk
- Deleted some HB_ARCHITECTURE compatibility lines.
Now only legacy hbmake sources keep referencing it.
