* src/common/hbfsapi.c
* src/rtl/filesys.c
* src/rtl/filebuf.c
* contrib/hbmzip/mzip.c
* contrib/xhb/filestat.c
! if available always use stat64() instead of stat() in *nixes builds.
On 32-bit platforms stat() fails for larger files (>2GB).
It should fix problem reported by Lorenzo.
* src/rdd/hbdbsort.c
* casting
* src/rtl/filesys.c
+ added additional method to extract file time in MS-Windows version of
hb_fsGetFileTime()
* include/hbapifs.h
* src/rtl/vfile.c
+ added C functions to manipulate PRG level hb_vf*() file pointer items
* include/hbapifs.h
* src/rtl/filebuf.c
+ added C functions to create/extract file IO handle from raw file handle
+ added C functions to check if file IO handle points to local file
* contrib/hbmzip/mzip.c
* changed hb_fs*() API to hb_file*() API
! fixed file time setting in *nix builds
* src/vm/set.c
! fixed freed memory access exploited by interactions between
modifications in last few years.
! do not try to remove trailing ^Z char reading from the stream
if FS_END seek reports 0.
! if possible open printer/alternate/extra output in write only mode
to avoid problem on devices where read access is not available.
* src/rtl/langapi.c
* keep EN lang active after deinitialization
* src/rtl/filesys.c
! fixed condition for file time refresh in *nix builds
! fixed file time setting in *nix builds
* include/hbapifs.h
* src/rtl/Makefile
* src/rtl/filebuf.c
+ src/rtl/filebufd.c
* renamed hb_fileRegister2() to hb_fileRegisterFull()
+ added new function hb_fileRegisterPart() which simplifies writing
small FILE IO redirectors.
* contrib/hbmemio/memio.c
* contrib/hbnetio/netiocli.c
* use hb_fileRegisterFull()
* contrib/hbplist.txt
+ contrib/hbtcpio/hbtcpio.hbc
+ contrib/hbtcpio/hbtcpio.hbp
+ contrib/hbtcpio/hbtcpio.hbx
+ contrib/hbtcpio/tcpio.c
+ added new Harbour FILE IO redirector.
It recognizes and process names with "tcp:" prefix, in form like:
tcp:<host>:<port>[:<timeout>]
It can be used in different subsystems using Harbour FILE IO and
stream read/write operations, i.e.
REQUEST HB_TCPIO
SET PRINTER TO tcp:192.168.0.110:9100
can be used to connect to network printers using TCP direct printing.
* utils/hbmk2/po/hbmk2.pt_BR.po
! fixed typo in translation
* include/hbapifs.h
* src/rtl/filebuf.c
+ added new C function hb_filePOpen()
* include/hbset.h
* src/vm/set.c
* src/rtl/console.c
* changed hb_fs*() API to hb_file*() API in HVM SETs
* src/vm/memvars.c
* changed hb_fs*() API to hb_file*() API in .mem files
* src/vm/runner.c
* changed hb_fs*() API to hb_file*() API in .hrb files
* include/hbapifs.h
* src/rtl/filesys.c
* renamed hb_fsPOpen() param
* contrib/hbhpdf/3rd/libhpdf/hpdffdfj.c
! removed executable attribute
* src/vm/thread.c
! fixed typo reported by Viktor - thanks.
* include/hbapifs.h
* src/rtl/hbproces.c
* src/rtl/spfiles.c
* src/rtl/filesys.c
* src/rtl/file.c
* synced parameter file and dir names used in declarations and
implementations
* include/hbrddcdx.h
+ added few fields used in ADI files
* src/codepage/cp_utf8.c
* src/rtl/cdpapi.c
! always return -1, 0 and 1 from hb_cdpcmp() function.
Workaround for problem exploited by optimized memcmp() function.
* src/rdd/dbfntx/dbfntx1.c
! fixed possible sort problem when optimized memcmp() is used
* added feew missing const declarations
* src/rdd/dbfntx/dbfntx1.c
* src/rdd/dbfnsx/dbfnsx1.c
* src/rdd/dbfntx/dbfntx1.c
! fixed OrdWildSeek() to work with optimized memcmp()
* include/hbapifs.h
* src/rtl/disksphb.c
+ added new C function:
double hb_fsDiskSpace( const char * pszPath, HB_USHORT uiType );
* include/hbapifs.h
* src/rtl/direct.c
+ added new C function:
PHB_ITEM hb_fsDirectory( const char * pszDirSpec,
const char * pszAttributes );
* src/rtl/filesys.c
! report EOF in hb_fsEof() also when file position is out of file size
* updated comment
* include/hbapifs.h
* src/rtl/filebuf.c
+ extended Harbour FILE IO API and added support for read/write filepos,
directory and link operations.
Read/write filepos support in some systems (i.e. *nixes) needs additional
emulation code. If it's not necessary then this functionality can be
disabled by FXO_NOSEEKPOS attribute. Now this attribute is used by our
RDD code.
* src/rtl/Makefile
+ src/rtl/xfile.c
+ added PRG interface to Harbour FILE IO API
The following PRG functions are available for Harbour programmers:
HB_XEXISTS( <cFileName>, [ @<cDestFileName> ] ) -> <lOK>
HB_XERASE( <cFileName> ) -> <nResult>
HB_XRENAME( <cFileSrc>, <cFileDst> ) -> <nResult>
HB_XCOPYFILE( <cFileSrc>, <cFileDst> ) -> <nResult>
HB_XDIREXISTS( <cDirName> ) -> <lExists>
HB_XDIRMAKE( <cDirName> ) -> <nSuccess>
HB_XDIRREMOVE( <cDirName> ) -> <nSuccess>
HB_XDIRECTORY( [ <cDirSpec> ], [ <cAttr> ] ) -> <aDirectory>
HB_XDIRSPACE( <cDirName>, [ <nInfoType> ] ) -> <nFreeSpace>
HB_XGETATTR( <cFileName>, @<nAttr> ) -> <lOK>
HB_XSETATTR( <cFileName>, <nAttr> ) -> <lOK>
HB_XGETDATETIME( <cFileName>, @<tsDateTime> ) -> <lOK>
HB_XSETDATETIME( <cFileName>, <tsDateTime> ) -> <lOK>
HB_XLINK( <cExistingFileName>, <cNewFileName> ) -> <nSuccess>
HB_XLINKSYM( <cTargetFileName>, <cNewFileName> ) -> <nSuccess>
HB_XLINKREAD( <cFileName> ) -> <cDestFileName> | ""
HB_XOPEN( <cFileName>, [ <nMode> ], [ <nAttr> ] ) -> <pHandle> | NIL
HB_XCLOSE( <pHandle> ) -> <lOK>
HB_XLOCK( <pHandle>, <nStart>, <nLen>, [ <nType> ] ) -> <lOK>
HB_XUNLOCK( <pHandle>, <nStart>, <nLen> ) -> <lOK>
HB_XLOCKTEST( <pHandle>, <nStart>, <nLen>, [ <nType> ] ) ;
-> <nPID> | 0 (nolock) | -1 (err)
HB_XREAD( <pHandle>, @<cBuff>, [ <nToRead> ], [ <nTimeOut> ] ) ;
-> <nRead>
HB_XWRITE( <pHandle>, <cBuff>, [ <nToWrite> ], [ <nTimeOut> ] ) ;
-> <nWritten>
HB_XREADAT( <pHandle>, @<cBuff>, [ <nToRead> ], [ <nAtOffset> ] ) ;
-> <nRead>
HB_XWRITEAT( <pHandle>, <cBuff>, [ <nToWrite> ], [ <nAtOffset> ] ) ;
-> <nWritten>
HB_XSEEK( <pHandle>, <nOffset>, [ <nWhence> ] ) -> <nOffset>
HB_XTRUNC( <pHandle>, [ <nAtOffset> ] ) -> <lOK>
HB_XSIZE( <pHandle> ) -> <nSize>
HB_XEOF( <pHandle> ) -> <lEOF>
HB_XFLUSH( <pHandle>, [ <lDirtyOnly> ] ) -> NIL
HB_XCOMMIT( <pHandle> ) -> NIL
HB_XCONFIG( <pHandle>, <nSet>, [ <nParam> ] ) -> <nResult>
HB_XHANDLE( <pHandle> ) -> <nOsHandle>
HB_XTEMPFILE( @<cFileName>, [ <cDir> ], [ <cPrefix> ], [ <cExt> ], ;
[ <nAttr> ] ) -> <pHandle> | NIL
Please remember that not all redirectors have to support all of them.
I.e. MEMIO allows to use directory names in files but does not allow to
create or remove directories. It also does not support file attributes
and times in current implementation though it can be easy added.
HB_XCONFIG() is general function which can be used by redirector
authors to make some special operations which are specific to given
device.
HB_XTEMPFILE() always creates temporary files on local system without
switching to FILE IO redirector. It's intentional behavior.
* src/rtl/fscopy.c
* used Harbour FILE IO API in hb_fsCopy()/HB_FCOPY()
Please remember that HB_FCOPY() always makes operation using current
system when HB_XCOPY() may optimize it moving the operation to low
level subsystem or even other computer i.e. NETIO can do that when
both files are located on the same server.
* src/rdd/delim1.c
* src/rdd/sdf1.c
* src/rdd/dbf1.c
* src/rdd/dbfcdx/dbfcdx1.c
* src/rdd/dbffpt/dbffpt1.c
* src/rdd/dbfnsx/dbfnsx1.c
* src/rdd/dbfntx/dbfntx1.c
* src/rdd/hsx/hsx.c
* open files with FXO_NOSEEKPOS attribute to inform low level API that
read/write filepos is not used (disables unnecessary filepos emulation).
* contrib/hbnetio/netio.h
* contrib/hbnetio/netiocli.c
* contrib/hbnetio/netiosrv.c
+ added support for extended Harbour FILE IO API.
* contrib/hbnetio/utils/hbnetio/netiomgm.hb
! renamed "quit" command to "shutdown" as suggested by Rolf.
* contrib/hbnetio/utils/hbnetio/hbnetio.prg
* allow to interrupt server process using ESC when run in console window.
* contrib/hbmemio/memio.c
+ added support for extended Harbour FILE IO API.
I left two minor TODO notes - maybe someone will try to implement it.
* contrib/hbct/ctnet.c
! fixed copy and past typo in previous commit
* src/rdd/hbsix/sxcompat.prg
! fixed sx_Compress() and sx_Decompress() used with arrays
; modifications below comes from Viktor fork:
* include/dbinfo.ch
* src/rdd/workarea.c
+ added support for new dbInfo() action: DBI_CODEPAGE
It returns Harbour CP used by current work area.
* src/common/expropt2.c
* change instruction order to protect against NULL references
if we ever add support for dummy lists
* src/common/hbver.c
! CLANG detection
* src/lang/l_fr.c
* src/lang/l_hu.c
* updated translations
* src/rtl/cdpapihb.c
* include/harbour.hbx
+ added function hb_cdpExists( <cCDP> ) -> <lExists>
it returns .T. if the passed codepage is supported
and linked, .F. otherwise
* src/rtl/hbrand.c
* include/harbour.hbx
+ added hb_randStr( <nLen> ) -> <cBytes> which returns a strong
random stream of bytes of requested length
* src/vm/hashfunc.c
* include/harbour.hbx
+ New hash function to easily check for the existence
of a key and at the same time retrieving its corresponding
value:
hb_HGetRef( <hHash>, <xKey>[, <@xValue> ] ) -> <lFound>
If the key is not found, <xValue> is also reset to NIL.
Useful to replace hb_HPos()/hb_HValueAt() call pairs and
associated temp variable, or to avoid multiple hash lookups
for the cost of one temp variable.
* src/rtl/copyfile.c
% use 64KB buffer
* src/rtl/tget.prg
! Get():Insert()/Get():OverStrike() GET freeze fix reworked
using better solution by Heinz.
* src/rtl/tgetlist.prg
* src/rtl/tmenuitm.prg
* src/rtl/tmenusys.prg
* src/rtl/tpopup.prg
! fixed to precisely verify against multiple expected class names
previously a custom class named f.e. 'LIST' was accepted in some
places for LISTBOX
! fixed TOFIX where CP/encoding dependent string was
used to determine whether a menu item is separator
throughout the lifetime of the menu.
* src/common/hbdate.c
* src/common/hbprintf.c
* src/common/hbtrace.c
* src/common/hbver.c
* src/compiler/compi18n.c
* src/compiler/genc.c
* src/compiler/gencc.c
* src/compiler/hbusage.c
* src/debug/dbgthsh.prg
* src/debug/dbgtmenu.prg
* src/debug/debugger.prg
* src/debug/tbrwtext.prg
* src/pp/hbpp.c
* src/rdd/dbfcdx/dbfcdx1.c
* src/rdd/dbfuncs.prg
* src/rdd/dbtotal.prg
* src/rdd/hbsix/sxcompat.prg
* src/rdd/hbsix/sxini.prg
* src/rdd/usrrdd/rdds/arrayrdd.prg
* src/rdd/usrrdd/rdds/hscdx.prg
* src/rtl/adir.prg
* src/rtl/arc4.c
* src/rtl/cdpdet.prg
* src/rtl/dbedit.prg
* src/rtl/dircmd.prg
* src/rtl/diskspac.c
* src/rtl/disksphb.c
* src/rtl/errint.c
* src/rtl/errintlo.c
* src/rtl/errsys.prg
* src/rtl/filesys.c
* src/rtl/fslink.c
* src/rtl/gtkbstat.c
* src/rtl/gtwin/gtwin.c
* src/rtl/gtwvt/gtwvt.c
* src/rtl/hbbffnc.c
* src/rtl/hbi18n1.c
* src/rtl/hbi18n2.prg
* src/rtl/hbini.prg
* src/rtl/hbjson.c
* src/rtl/listbox.prg
* src/rtl/menusys.prg
* src/rtl/mtran.c
* src/rtl/radiogrp.prg
* src/rtl/tgetlist.prg
* src/rtl/tmenusys.prg
* src/rtl/tobject.prg
* src/rtl/tpersist.prg
* src/rtl/tpopup.prg
* src/rtl/tpopuphb.prg
* src/rtl/treport.prg
* src/rtl/tscalar.prg
* src/rtl/ttopbar.prg
* src/rtl/tget.prg
* src/rtl/tlabel.prg
* src/rtl/tmenuitm.prg
* src/rtl/valtoexp.prg
* src/rtl/valtype.c
* src/vm/dlmalloc.c
* src/vm/fm.c
! check module handle returned by GetModuleHandle() in MS-Windows
builds
! use %u for unsigned printf formatting
* casting, formatting, casing and some modifications in names
* use #if 0 / #endif to mark commented blocks
* updated year to 2014
% use FOR EACH, SWITCH, DO CASE statements
% use :__enumFirst() / :__enumLast()
% eliminated some local variables and redundant declarations
% use hb_defaultValue()
% use $ operator instead of At() and hb_HHasKey()
% use hb_ADel() instead of ADel()+ASize()
* replace some functions with procedures
* pacified some MSC warnings
* use hb_StrFormat() for user messages
* use :: instead of Self:
* use ANSI date delimiters
* src/rtl/filesys.c
+ added support for setting non blocking mode in MS-Windows builds
of hb_fsPipeUnblock()
* src/rtl/hbproces.c
! rewritten MS-Windows version of hb_fsProcessRun()
* contrib/3rd/sqlite3/sqlite3.hbp
* Disable on Minix (no MAP_SHARED which is needed by SQLite WAL);
(Hopefully a temporary measure.)
* src/rtl/filesys.c
! Disable hb_fsPipeUnblock() on Minix;
makes hb_processRun() work. Thanks to Przemek for the idea.
* (all files)
* stripped svn header
* minor cleanups
; use following command to find out the history of files:
git log
git log --follow
git blame
git annotate
