/* * $Id$ */ /* Use this format for the entry headers: YYYY-MM-DD HH:MM UTC[-|+]hhmm Your Full Name For example: 2002-12-01 13:30 UTC+0100 Foo Bar */ * harbour/source/vm/runner.c * synced with xHarbour * harbour/utils/hbtest/rt_misc.prg * added overloading "=" operator. Now "==" and "=" can be overloaded with different methods All names I used for new functions/macros can be changed. Please look at it and if you will some better propositions then we can use it. hb_vmProcessSymbolsExt() is added but not used yet. 2006-06-07 16:35 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbrddcdx.h * harbour/include/hbrdddbf.h * harbour/source/rdd/dbcmd.c * harbour/source/rdd/delim1.c * harbour/source/rdd/dbffpt/dbffpt1.c * cleaned // comments and some compiler warnings * harbour/include/dbinfo.ch * harbour/source/rdd/dbf1.c ! fixed setting [V]FP DBF table type * harbour/source/vm/arrays.c ! fixed ADEL() to clear last element % optimized a little bit AINS() - use hb_itemMove() instead of hb_itemCopy() 2006-06-05 20:30 UTC+0200 Jacek Kubica (kubica/at/wssk.wroc.pl) * harbour/makefile.bc * added references for USRRDD.LIB 2006-06-04 18:30 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbdefs.h * use i64 suffix for BCC 3.0 and higher for long long int * harbour/source/rtl/dummy.prg * harbour/source/rdd/dbcmd.c * added undocumented Clipper function: __dbTrans() __dbOpenSDF() and __dbJoin() I'll commit soon. There is also __dbTransRec() in dummy.prg but I cannot find any information about this function and its parameters in GOOGLE. If someone knows what is this functions syntax and can Inform me then I'll implement it. I guess it's a wrapper to TRANSREC() RDD method. * harbour/source/rdd/dbf1.c * DBI_LOCKOFFSET now returns DBF record lock offset really used (f.e. updated in FP locking after open/close production index) * harbour/source/rdd/delim1.c * cleaned BCC warning * harbour/source/rdd/dbfcdx/dbfcdx1.c ! updated internal production index flag after manual opening production index 2006-06-02 14:30 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/hb-func.sh * harbour/config/global.cf + harbour/include/usrrdd.ch + harbour/source/rdd/usrrdd/Makefile + harbour/source/rdd/usrrdd/usrrdd.c + harbour/source/rdd/usrrdd/rdds/Makefile + added USRRDD library. It allows to create new RDD from scratch or by inheriting from any other RDDs (except USRRDDs) and overloading any of their methods at .prg level. I hope you will find a lot of fun in creating your own RDDs. I wanted to create more examples and added some documentation but I do not have time for it now - sorry. Try to look at examples below and if you need some more detail information then look at Clipper's NG Technical Reference Guide or ask me. I'll try to help. Two RDDs which seems to be requested by users are ARRAY RDD and OLE RDD. I hope that some of you implement them. + harbour/source/rdd/usrrdd/rdds/dbtcdx.prg * Very simple RDD DBTCDX which inherits from DBFCDX and set default memo type to DBT, see exmemo.prg as an example. + harbour/source/rdd/usrrdd/rdds/fptcdx.prg * Very simple RDD FPTCDX which inherits from DBFCDX and set default memo type to FPT, see exmemo.prg as an example. + harbour/source/rdd/usrrdd/rdds/smtcdx.prg * Very simple RDD SMTCDX which inherits from DBFCDX and set default memo type to SMT, see exmemo.prg as an example. + harbour/source/rdd/usrrdd/rdds/fcomma.prg * A simple RDD which uses HB_F*() functions from MISC library to access CSV files. It allow to open an CSV file and navigate using SKIP()/GOTO()/GOTOP()/GOBOTTOM() functions using BOF()/EOF()/RECNO()/LASTREC() to check current state. HB_F*() functions does not support single field access and allow to read only the whole line. This RDD also. I only added one virtual field which exist in all tables open by this RDD called LINE which contains the current .csv file line. + harbour/source/rdd/usrrdd/rdds/hscdx.prg * A simple RDD which adds automatically update HSX indexes to DBFCDX To create new HSX index for current work area use: HSX_CREATE() To open already existing one use HSX_OPEN(), To close use: HSX_CLOSE() To retieve an handle use: HSX_HANDLE() + harbour/source/rdd/usrrdd/rdds/rlcdx.prg * A simple RDD which introduce lock counters. It has full DBFCDX functionality from which it inherits but if you execute DBRLOCK(100) twice then you will have to also repeat call to DBRUNLOCK(100) to really unlock the record 100. The same if for FLOCK() This idea comes from one of messages sent by Mindaugas Kavaliauskas. + harbour/source/rdd/usrrdd/example/exfcm.prg * example of using FCOMMA RDD + harbour/source/rdd/usrrdd/example/exhsx.prg * example of using HSCDX RDD + harbour/source/rdd/usrrdd/example/exrlx.prg * example of using RLCDX RDD + harbour/source/rdd/usrrdd/example/exmemo.prg * example of using DBTCDX, FPTCDX and SMTCDX RDDs 2006-06-02 14:15 UTC+0100 Ryszard Glab * harbour.spec * include/hbver.h * updated to set version 0.46.1 for build46 2006-06-02 14:00 UTC+0100 Ryszard Glab * include/hbexpra.c * fixed bug in GET var[ any_one_dim_index ] * source/pp/ppcore.c * fixed BCC warning NOTICE: The above files are retagged to 'build46' 2006-05-31 14:00 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rdd/dbcmd.c * Sinchronised version with harbour/include/hbver.h 2006-05-31 13:45 UTC+0200 Tomaz Zupan (tomaz.zupan at orpo.si) * harbour.spec * Added Mandriva to recognised distros * Sinchronised version with harbour/include/hbver.h 2006-05-30 18:15 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rdd/sdf1.c * cleaned BCC warning * harbour/source/rdd/delim1.c ! fixed BCC compilation (string initialization with dynamic values is forbidden by BCC) 2006-05-30 12:15 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbver.h * changed version number and ChangeLog entry * harbour/make_tgz.sh ! fixed creating PP in DJGPP builds * harbour/contrib/dot/pp.prg ! minor fix in parameter checking * harbour/contrib/libmisc/hb_f.c ! fixed bug in record numbering after reaching EOF position and backward skipping * harbour/include/hbrdddel.h * harbour/source/rdd/delim1.c + implemented DELIM RDD. It should be fully Clipper compatible in comma files parsing. If you will find any difference, please inform me and I'll update it. Unlike in Clipper in [x]Harbour these RDD can be used also in direct import operations with APPEND FROM ... VIA "DELIM" These RDD also support whole record transfering between RDDs if they support the same record format and field representation and can translate extended field types like "I", "B", "V3", "V4", etc. * harbour/source/rtl/dbdelim.prg * replaced old code of __dbDelim() function with simple calls to __dbCopy()/__dbApp() - it should fix most of the reported incompatibilities in DELIM import/export operations and increase their speed many times * harbour/include/hbrddsdf.h * harbour/source/rdd/sdf1.c + implemented SDF RDD. It should be fully Clipper compatible in SDF files parsing. If you will find any difference, please inform me and I'll update it. Unlike in Clipper in [x]Harbour these RDD can be used also in direct import operations with APPEND FROM ... VIA "SDF" These RDD also support whole record transfering between RDDs if they support the same record format and field representation and can translate extended field types like "I", "B", "V3", "V4", etc. * harbour/source/rtl/dbsdf.prg * replaced old code of __dbSDF() function with simple calls to __dbCopy()/__dbApp() - it should fix most of the reported incompatibilities in SDF import/export operations and increase their speed many times * harbour/source/rdd/dbcmd.c + added support for table structure inheriting in transfer RDDs. + added eleventh parameter with delimiter to __dbCopy()/__dbApp() * harbour/source/rdd/dbf1.c * force 10 bytes size for memo fields in DBF and SMT memos. * some minor clean-up. * harbour/source/rdd/workarea.c * added some dummy DBI_* actions in base RDD level 2006-05-30 12:09 UTC+0300 Chen Kedem + doc/howtorel.txt + How-to-Release document by Przemyslaw Czerpak (druzus/at/priv.onet.pl) * doc/whatsnew.txt + Add tag information to all tagged builds. * harbour.spec * doc/whatsnew.txt * include/hbver.h * modified to store build number 46 2006-05-29 14:10 UTC+0100 Ryszard Glab in PARAMETERS and PRIVATE statements (NOTICE: this error is *fixed invalid memory access *fixed to generate error in cases when variable name is duplicated in PARAMETERS and PRIVATE statements (NOTICE: this error is generated when automatic memvar declaration was requested only using -a command line switch) 2006-05-23 14:21 UTC+0300 Chen Kedem * doc/whatsnew.txt + Add information about the upcoming alpha build 46. * doc/en/compiler.txt + Add a line for -gc3 switch. * source/compiler/hbusage.c + Add a line for -gc3 switch. * Bumped the copyright year from 2005 to 2006. 2006-05-19 21:05 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/hb-func.sh * added support -go[0-3] and other -g* switches to xhb* scripts * harbour/include/hbapi.h + added ISSYMBOL() macro * formatting * harbour/include/hbapirdd.h * changed definition of SUPERTABLE for optional dynamic overloading this modification will not effect existing code * harbour/include/hbrddfpt.h * harbour/source/rdd/dbffpt/dbffpt1.c * added support for NIL value in SIX3 FPT files * harbour/include/hbcomp.h * harbour/source/compiler/harbour.c * harbour/source/compiler/genc.c * harbour/source/compiler/gencli.c * harbour/source/compiler/genhrb.c * harbour/source/compiler/genjava.c ! message symbols are not function symbols - cleaned the HB_FS_MESSAGE usage and fix the problem with registering static function in global symbol table * harbour/source/compiler/gencc.c ! fixed typo in compilation for platforms 64 bit LONG * harbour/include/hbvmpub.h * harbour/source/compiler/cmdcheck.c * harbour/source/vm/asort.c * harbour/source/vm/evalhb.c * formatting * harbour/source/rdd/dbcmd.c * formatting and some minor clean-up * harbour/source/rdd/workarea.c * added default SYSNAME method ! fixed possible memory leak when APPEND failed in TRANSREC method * harbour/source/rdd/hsx/hsx.c ! fixed using HS_ADD()/HS_REPLACE() without STRING/BLOCK expression * harbour/source/rtl/cdpapi.c * cleaned GCC4 warning * harbour/source/rtl/do.c * changed to keep parameter references in DO() function. Now it works like IIF()/EVAL() * harbour/source/vm/classes.c * removed some definitions repared from hbapi.h + added support to passing function references as HB_IT_SYMBOL * harbour/source/vm/dynlibhb.c ! fixed GPF in HB_LIBDO called with wrong parameter * harbour/source/vm/hvm.c ! fixed hb_rddGetFieldValue() to not operate on unallocated stack area it could cause unpredictable results when RDD had to access HVM, f.e. for evaluation some pending relations. The whole code should be carefully checked and to not operate on hb_stackTopItem() if other functions are called to make the HVM fully reentrant. + added commented out support for passing HB_IT_SYMBOL as function pointer * formatting * harbour/source/vm/itemapi.c * return "S" for HB_IT_SYMBOL by hb_itemType() * formatting 2006-05-14 09:36 UTC+0300 Chen Kedem * doc/dirstruc.txt + Add oneliner description for: source\rtl\gtalleg, source\rtl\gtwvt, source\rtl\gtxwc, source\vm\mainstd * doc/howtocvs.txt * Update CVS location to reflect recent changes in SourceForge. 2006-05-05 11:30 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/hb-func.sh * changed the exit code for .hrb file compilation by xhbcmp * harbour/include/hbcomp.h * harbour/source/compiler/gencc.c * harbour/source/compiler/hblbl.c * removed some variables which are not necessary in Harbour * harbour/source/compiler/hbfix.c + added unconditional and conditional jump joining optimization * harbour/source/vm/classes.c * indenting and some minor modifications * harbour/source/rdd/dbfcdx/dbfcdx1.c ! clear the logical key position buffer for pending relations or hot record buffer updating * harbour/source/rdd/dbffpt/dbffpt1.c * harbour/source/vm/hvm.c * casting * harbour/source/vm/macro.c * harbour/include/hbvmpub.h * removed HB_FS_ALLOCATED * harbour/source/vm/dynsym.c * changed the code for hb_symbolNew() to avoid possible memory leak alerts and keep the list of all dynamic symbols accessible. It also reduced a little bit the memory fragmentation and total * fixed bug in ParseOptional * bin/bld.sh * fixed typo * source/pp/ppcore.c * fixed bug in ParseOptional <"var"> were not recognized correctly (This fixes SET RELATION bug reported by David Macias) 2006-04-15 20:20 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/Makefile + harbour/include/blob.ch * harbour/include/dbinfo.ch * harbour/include/hbdbferr.h * harbour/include/hbrddfpt.h * harbour/source/rdd/dbf1.c * harbour/source/rdd/workarea.c * harbour/source/rdd/dbffpt/dbffpt1.c + added all CL5.3 BLOB*() functions support + added new RDD DBFBLOB compatible with CL5.3 DBFBLOB It operates on memo files only (.dbv) without tables (.dbf) To create .DBV file use: dbCreate( cFile, {}, "DBFBLOB" ) * harbour/source/rdd/dbcmd.c * do not report error when empty structure table is passed to DBCREATE() CL5.3 allow to create even DBF files without any fields and because I can imagine some valid code which use it as a feature then I also allow it in DBF RDD. Authors of RDDs which do not allow to create tables without fields should add to their low level RDD code necessary RT error. 2006-04-14 20:51 UTC+0100 Jacek Kubica (kubica/at/wssk.wroc.pl) * source/rtl/filesys.c ! fixed problem in CURDIR() wchich return truncate value if directory name is 3 chars long (fix given by Przemyslaw Czerpak) 2006-04-10 00:50 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rdd/dbfntx/dbfntx1.c ! fixed skip back after updating last record 2006-04-09 19:16 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rdd/dbfcdx/dbfcdx1.c ! fixed scope checking when skip is done from the record which dos not exist in index * harbour/source/vm/classes.c * use hb_itemClone() - it will save us modifications in the future if we will add new items which will be passed as parameters like arrays (f.e. hashes) * some source code formatting 2006-04-09 14:55 UTC+0300 Alexander Kresin * contrib/rdd_ads/ads1.c * Added possibility to save memo fields > 64K 2006-04-08 02:42 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rdd/dbfcdx/dbfcdx1.c ! update current order number after ordDestroy() * harbour/source/rdd/dbfntx/dbfntx1.c % Optimized __CLSADDMSG() to call hb_parc() only once instead but I forgot to also change the record in DBF ! Possible problem fixed in __CLSADDMSG() where message parameter was required to be uppercase when overloading operator .NOT., * harbour/source/vm/classes.c % hb_dynsymGet() calls replaced with hb_dynsymGetCase() where the of 25 times for most cases. ! Possible problem fixed in __CLSADDMSG() where message parameter was required to be uppercase when overloading operator .NOT., .AND. or .OR. % hb_dynsymGet() calls replaced with hb_dynsymGetCase() where the parameter was an already uppercased constant. * harbour/source/vm/dynsym.c ! Fixed HB_TRACE() function name in hb_dynsymGetCase(). 2006-04-07 15:00 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/hb-func.sh * support for detecting startup function in C++ mode * harbour/include/hbapi.h * some few #defines to translate some xHarbour functions names to Harbour * harbour/include/hbxvm.h * harbour/source/compiler/gencc.c * harbour/source/vm/hvm.c * harbour/source/vm/itemapi.c * harbour/source/common/hbdate.c + added optimizations for add and div by integer value * changed code generated for double values to avoid limitation in some C compilers like MSC and possible differ conversion inside C RTL then the one which uses Harbour RTL * some minor optimizations, cleanups and code formating * harbour/source/compiler/hbfix.c * optimize usage of HB_P_NOT PCODE - remove repeated NOT operations or revert conditional jumps if they are just after NOT. * harbour/source/rdd/dbf1.c * added support for NULL value set in memo fields by ACCESS * harbour/source/rdd/dbfcdx/dbfcdx1.c * fixed ordKeyPos() - for records out of scope * harbour/source/rtl/padc.c * harbour/source/rtl/padl.c * harbour/source/rtl/padr.c * harbour/source/rtl/substr.c * some minor optimizations to avoid new string item creation when it's not necessary * harbour/source/vm/classes.c * harbour/source/vm/extend.c 2006-04-06 14:05 UTC+0100 Ryszard Glab * source/compiler/harbour.c * fixed registering of startup procedure name * source/pp/ppcore.c * ignore escaped '<' in command/translate definitions (work in progress) 2006-04-05 15:49 UTC+0100 Antonio Linares * source/makefile.nt + Added hblbl.c and gencc.c modules * harbour/source/vm/mainwin.c * harbour/source/rtl/gtwvt/gtwvt.c * harbour/source/compiler/harbour.l 2006-04-05 13:35 UTC+0100 Ryszard Glab * source/compiler/harbour.c * source/compiler/harbour.l * fixed compilation of macro expression (the first letter was eaten in some cases) * source/pp/ppcore.c * source/pp/pplib.c * fixed calls to hb_pp_ParseDirective * increased back the input buffer to HB_PP_STR_SIZE (12288 bytes) 2006-03-29 11:55 UTC+0100 Ryszard Glab *fixed declaration of hb_pp_StreamBlock * source/pp/ppcore.c * added two guards for buffer overflow 2006-03-28 18:00 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/compiler/harbour.c ! upper the default .prg function name created from .prg file name when compiled without -n switch 2006-03-28 17:20 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/vm/hvm.c 2006-03-28 14:35 UTC+0100 Ryszard Glab * include/hbexpra.c * fixed optimization of 'EVAL' in macro compiler * harbour/makefile.bc * fixed calculation of length of stringify expressions 2006-03-28 13:46 UTC+0200 Jacek Kubica (kubica/at/wssk.wroc.pl) * harbour/makefile.bc * harbour/makefile.nt * harbour/makefile.vc * harbour/makefile64.nt + added references for harbour/source/compiler/hbstrong.c 2006-03-28 13:00 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbcomp.h + added hb_compPCodeSize() and hb_compStrongType() declarations * harbour/include/hbpp.h * formatting * harbour/source/compiler/Makefile + harbour/source/compiler/hbstrong.c * harbour/source/compiler/hbpcode.c * moved strong typing code to separate file * harbour/source/compiler/hbpcode.c + added hb_compPCodeSize() function + added support for automatic size checking of variable size PCODEs in hb_compPCodeEval() * harbour/source/compiler/gencc.c * added escaping of '?' character in generated strings to avoid possible conflicts with trigraph sequences which are part of ANSI C standard * force .0 at the end of double numbers to avoid possible range conflicts in generated .c files * removed unnecessary HB_SYMBOL_UNUSED() * harbour/source/compiler/harbour.l * harbour/source/compiler/harbour.y * harbour/source/macro/macro.l * harbour/source/macro/macro.y * added #define realloc hb_xrealloc * harbour/source/compiler/hbdead.c * harbour/source/compiler/hbfix.c * harbour/source/compiler/hblbl.c * harbour/source/compiler/hbstripl.c * use hb_compPCodeSize() function * removed not longer necessary functions for checking the real size of variable size PCODEs * harbour/source/vm/hvm.c * fixed RT error number in hb_vmAddInt() for negative values to be 2006-03-27 15:25 UTC+0100 Ryszard Glab * contrib/htmllib/default.ch * source/compiler/hbident.c * source/compiler/harbour.l * source/pp/ppcore.c * fixed my last commits * processed this file with indent 2006-03-25 03:30 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbstack.h * harbour/source/vm/estack.c * added pEnd to hb_stack structure to speed up hb_stackPush() which is one of the most often used operation in HVM. * harbour/include/hbapi.h * small trick with HB_IS_* macros to give a compiler a chance to make them faster on some machines * harbour/source/compiler/genc.c ! fixed stripping non identifier characters from symbol table name * harbour/source/compiler/hbpcode.c * cleaned comment * harbour/source/rdd/dbf1.c * set Operation in error object to field name in field{put,get} methods. + added DBI_LOCKOFFSET * harbour/source/vm/classes.c * formatting * harbour/source/vm/hvm.c * harbour/source/vm/itemapi.c * some minor speed optimizations 2006-03-23 14:50 UTC+0100 Ryszard Glab * source/pp/ppcore.c as Clipper * tests/pretest.prg * added more tests to check preprocessor 2006-03-22 16:05 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbstack.h * harbour/source/vm/estack.c + added hb_stackDecrease( ULONG ) * harbour/include/hbxvm.h * harbour/source/vm/hvm.c + added hb_xvmArrayItemPush(), hb_xvmArrayItemPop(), hb_xvmMultByInt() * harbour/source/compiler/gencc.c % use hb_xvmArrayItemPush(), hb_xvmArrayItemPop(), hb_xvmMultByInt() If someone has time then it will be good to also add: hb_xvmDivByInt(), hb_xvmModulusInt(), hb_xvmPlusInt(), hb_xvmMinusInt() * harbour/source/vm/itemapi.c * use simple memcpy() in hb_itemSwap() - it's save in current HVM It could become unsafe if we add reference tracing or sth like that in the future but in such case we will have to also update hb_itemCopy() and hb_itemMove() so we can also update hb_itemSwap() * harbour/source/vm/asort.c * harbour/source/vm/classes.c * harbour/source/vm/memvars.c * harbour/source/vm/hvm.c * cleaned the code which created HB_ITEMs on C stack. Only three places have to be update yet and array/clodeblock creation little bit modified and we will be able add automatic GC activation in hb_xgrab() or hb_gcAlloc(). 2006-03-21 13:40 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/vm/hvm.c ! added missing void in hb_xvmActionRequest() declaration to avoid BCC warnings * harbour/makefile.bc * harbour/source/vm/hvm.c + missing declaration for hb_xvmActionRequest added 2006-03-21 03:17 UTC+0100 Jacek Kubica (kubica/at/wssk.wroc.pl) * harbour/makefile.bc added referenced to: harbour/source/compiler/gencc.c harbour/source/compiler/hblbl.c 2006-03-21 02:25 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/make_gnu.bat * harbour/make_gnu.cmd * harbour/make_gnu.sh * added information about GTWVT to GT description for Windows * harbour/contrib/rdd_ads/ads1.c * harbour/contrib/rdd_ads/adsfunc.c * harbour/source/rdd/dbf1.c * synced with xHarbour * harbour/source/rtl/console.c ! fixed PROW() updating to be Clipper compatible when row number exceed 16bit integer value * harbour/source/rtl/filesys.c ! fixed possible GPF when hb_fsCurDirBuff() * harbour/source/rtl/str.c * harbour/source/rtl/strzero.c * minor optimizations * harbour/source/rtl/strpeek.c ! fixed accessing the last character in STRPEEK() and STRPOKE() * harbour/include/hbgtinfo.ch * harbour/source/rtl/gtwin/gtwin.c + synced with recent xHarbour modifications * harbour/source/rtl/gtwvt/gtwvt.c * cleaned BCC warning * harbour/include/hbapi.h * harbour/source/vm/codebloc.c * declare BYTE * passed to hb_codeblockNew() as const * harbour/include/hbpcode.h ! fixed the PCODE numbers in PCODE description, 122 was repeated for two different PCODEs: HB_P_ONE and HB_P_MACROLIST * harbour/source/compiler/genc.c ! fixed hb_p_functionshort pcode size returned by genc function ! fixed double value presented in verbose genc mode for HB_P_PUSHDOUBLE ! fixed number of cases presented in verbose genc mode for HB_P_SWITCH * harbour/source/compiler/hbdead.c + added support for dead code elimination in functions which uses SWITCH ...; CASE ...; ...; END syntax * harbour/source/compiler/harbour.c * harbour/source/compiler/hbfix.c ! fixed optimization for HB_P_PUSHLOCALNEAR and HB_P_POPLOCALNEAR. It was a long existing bug not reported so far because 0, 1 and 2 PCODEs uses only one BYTE and bad PCODE tracing in hbfix.c didn't caused bad side effects as long as number of locals in function was smaller then 768. Now for functions HB_P_PUSHLOCAL and HB_P_POPLOCAL is used and later changed to NEAR version in hbfix.c if possible. * harbour/source/compiler/hbfix.c * join sequential jumps to optimize constructions like: while ... ... if ... exit endif enddo * harbour/source/compiler/hbdead.c * remove HB_P_END PCODE also at the and of function if is repeated just before, f.e. in code like (source/rtl/color53.prg): Function RADGRDEFCO( cColor ) if isdefcolor() Return applydefau( cColor, "W/N", "W/N", "W+/N") Else Return applydefau( cColor, 3, 1, 4) endif Return nil Now such redundant constructions like above are fully stripped by compiler anyhow if someone has time and think is important then can clean also this .prg code. * harbour/include/Makefile * harbour/include/hbcomp.h + harbour/include/hbxvm.h * harbour/source/compiler/Makefile * harbour/source/compiler/cmdcheck.c * harbour/source/compiler/genc.c + harbour/source/compiler/gencc.c + harbour/source/compiler/hblbl.c * harbour/source/compiler/hbpcode.c * harbour/source/vm/hvm.c + added support for generating real C code not PCODE in .c files. Now with -gc3 Harbour will generate .c files with real .c code which is later compiled to real machine code. I left PCODE only for code block definitions though it's also possible to have even code block compiled to machine code but we will have to add a flag to codeblock structure which will be checked at runtime and proper method of execution in EVAL will be chosen. If you think it's worth of afford then I can add it too in some spare time. The final binaries are noticable longer then the one which has only PCODE but they are faster. The speed improvement depends on type of operations. The pure Clipper code which does not execute any external time consuming C functions compiled with -gc3 is from 10% to 50% faster. The side effect of generating pure machine code is also harder recompilation but it does not mean that is impossible. If sth can be executed by some machines (virtual or hardware) then it can always be decompiled by definition. This modification opens door for farther optimization, f.e. when we will have fully working strong type support then we can add using native .c types. In fact this module is PCODE to .c translater not part of compiler and can be used as separate module to translate generated PCODE, f.e. .hrb files. Maybe in the future we will change the compiler to generate meta code not directly PCODE and it will be possible to make optimizations on this meta code which will depend on selected output type: VHM PCODE, C code, .NET code, etc. but at this moment adding support for .c compilation directly into compiler will make the compiler code too much complicated for me - IMHO it's better to invest time into clear separation to FRONT_END->REAL_COMPILER->BACK_END Please make test with your code. I rebuild whole Harbour code with -gc3 set in HB_FLAGS in harbour/config/rules.cf and all seems to work correctly. hbtest returns exactly the same results. I also made tests with my programs and they work correctly but * harbour/makefile.bc some typos in some of them which are very seldom used so your tests will be very important. 2006-03-19 03:43 UTC+0100 Jacek Kubica (kubica/at/wssk.wroc.pl) * harbour/makefile.bc * harbour/makefile.nt * harbour/makefile.vc * harbour/makefile64.nt * harbour/makefile.bc * harbour/makefile.vc - removed references to harbour/source/rtl/gtwin/mouseobj 2006-03-16 09:00 UTC+0100 Jacek Kubica (kubica/at/wssk.wroc.pl) * harbour/makefile.bc * harbour/makefile.nt * harbour/makefile.vc * harbour/makefile64.nt - removed entry for harbour/source/lang/msgen.c file. 2006-03-16 05:35 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/lang/Makefile - harbour/source/lang/msgen.c * harbour/source/rtl/langapi.c * moved EN lang definitions to core lang code so we always have at least one lang module defined at sartup. Modified after common group agreement - no one was against, thanks to all for answers. Please update non GNU make files and remove harbour/source/lang/msgen.c file. * harbour/source/rtl/cdpapi.c * replaced CDP startup initialization with simple assignment * harbour/source/rtl/gtpca/gtpca.c * added #include for *nix platforms 2006-03-13 23:15 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/hbgtcore.c * respect pure REQUEST HB_GT_NUL as user GT choice if only GTNUL is linked * harbour/source/rtl/errorint.c ! fixed GPF when no lang module is register - I'll wait a while for other people opinion and if no one will give good reason against then I'll make EN language definition default part of langapi.c what will resolve the problem of valid error description when no language module is linked. 2006-03-13 19:20 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/ChangeLog * fixed description in last commit. Should be HB_GTSYS() not GTSYS() * harbour/include/hbapi.h * fixed hb_retl() macro by adding missing parenthesis * harbour/source/compiler/harbour.c * removed unnecessary initialization to avoid BCC warning * harbour/source/rtl/console.c * harbour/source/rtl/hbgtcore.c * do not call hb_gtOutStd()/hb_gtOutErr() when given string has 0 length - it may cause unpredictable results in low level hb_fsWrite() when trunc operation will be activated for non real file handles in some systems * harbour/source/rtl/errorint.c * increased the error message buffer * harbour/source/rtl/inkey.c * fixed typo in comment * harbour/source/rtl/gtcrs/gtcrs.c * formatting 2006-03-13 11:40 UTC+0100 Ryszard Glab * source/compiler/cmdcheck.c * source/pp/pragma.c * fixed to force max recurse preprocessor passed bigger then 0 * source/pp/ppcore.c * suppressed memory access error in getExpReal + added missing '.' in valid match markers (ConvertOptional) 2006-03-11 09:45 UTC+0100 Ryszard Glab * source/pp/ppcomp.c * source/pp/ppcore.c * source/rtl/gtcrs/gtcrs.c * fixed to suppress warning messages in some compilers 2006-03-10 21:15 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/config/rules.cf * harbour/config/bsd/gcc.cf * harbour/config/darwin/gcc.cf * harbour/config/dos/bcc16.cf * harbour/config/dos/djgpp.cf * harbour/config/dos/owatcom.cf * harbour/config/dos/rsx32.cf * harbour/config/dos/watcom.cf * harbour/config/linux/gcc.cf * harbour/config/os2/gcc.cf * harbour/config/os2/icc.cf * harbour/config/sunos/gcc.cf * harbour/config/w32/bcc32.cf * harbour/config/w32/gcc.cf * harbour/config/w32/global.cf * harbour/config/w32/icc.cf * harbour/config/w32/mingw32.cf * harbour/config/w32/msvc.cf * harbour/config/w32/rsxnt.cf * harbour/config/w32/watcom.cf * use F macro extension to extract file name from given macros. It simplified some rules and allow to use vpath and differ file locations in GNU Makefiles * moved the BCC16 excpetion for C_RULE from global rules.cf to DOS bcc16.cf file * use mainstd library in MinGW build * harbour/include/hbapi.h + added two new functions: hb_winmainArgInit() and hb_winmainArgGet() to set/retrieve WinMain() parameters. + added hb_strMatchWildExact() * harbour/source/pp/ppcore.c * initialized variable to avoid compiler warning * harbour/source/rtl/console.c * cleaned comment * harbour/source/rtl/hbffind.c ! Fixed invalid handle error in Windows when file() fails (fix borrowed from xHarbour) * harbour/source/rtl/strmatch.c + added hb_strMatchWildExact() + added 3-rd parameter to WildMatch() - when it's TRUE WildMatch() will check if given pattern cover the whole string. Without it it check if pattern is valid prefix only. * harbour/source/rtl/gtcrs/gtcrs.c * harbour/source/rtl/gtcrs/gtcrs.h * harbour/source/rtl/gtsln/mousesln.c * do not call Gpm_GetSnapshot() to avoid stupid message on stderr generated from GPM library - I lost the the hope that it will be fixed ;-) * harbour/source/rtl/gtpca/gtpca.c * use select() in *nixes for cursor position terminal feedback. * harbour/source/rtl/gtwin/gtwin.c * try to always allocate console when compiled without HB_NO_ALLOC_CONSOLE. It allow to use GTWIN also in real windows programs. + harbour/source/rtl/gtwvt/Makefile + harbour/source/rtl/gtwvt/gtwvt.c + harbour/source/rtl/gtwvt/gtwvt.h + added new GT driver GTWVT - the core of this driver it's Peter Ress work in xHarbour. In Harbour GTWVT contains only pure GT code without local to GTWVT xHarbour extensions and GTWVT contrib libraries. This extensions can be added but later but I want to keep them separated from the core GTWVT code and add them as upper level GT which can inherit from GTWVT. Just like I've implemented CTWIN. Please update non GNU make files and test this GT in Windows. The programs which want to use GTWVT should be compiled as standard Windows GUI programs. GTWVT replaces window console code. if you add to your code: proc HB_GTSYS() request HB_GT_WIN request HB_GT_WVT return then the final binaries will be linked with both GT drivers and you can switch between them using //gt[:] switch. F.e.: ./my_prog //gtwin or ./my_prog //gtwvt this feature works in all platforms. People who works in shell environment (*nixes, MSYS, DJGPP) and use hb* scripts does not have to use HB_GTSYS() in source code but can simply use -gt switch in hblnk and hbmk. * harbour/source/rtl/gtxwc/gtxwc.c * some minor cleanups and code formatting * harbour/source/vm/Makefile + harbour/source/vm/mainstd/Makefile * moved mainstd.c to separate mainstd library for MinGW32 build. Unfortunately MinGW always link main() function if it locate it in libraries and ignores WinMain() what effectively makes impossible to create Windows GUI programs if we have main() in VM library. People who are using MinGW and wants to create only pure console programs should now include mainstd library to linked library list. * harbour/source/vm/cmdarg.c * harbour/source/vm/mainwin.c + added two new functions: hb_winmainArgInit() and hb_winmainArgGet() to set/retrieve WinMain() parameters. 2006-03-10 12:20 UTC+0100 Ryszard Glab + added 'extern' declaration * source/compiler/hbusage.c + added short usage info abour /r= switch * doc/pragma.txt * doc/en/compiler.txt 2006-03-10 10:20 UTC+0100 Ryszard Glab *fixed compilation for Borland C * source/pp/ppcore.c * tests/Makefile + tests/pretest.prg + added the file to show '#pragma __stream' and '#pragma __cstream' 2006-03-09 16:30 UTC+0100 Ryszard Glab * include/hbexpra.c * include/hbexprb.c * include/hbexprop.h * modified to support strings with embeded LF/CR characters * source/common/hbstr.c * added new command line switch * added hb_strRemEscSeq() function that removes C-like Esc sequences (\n \t \r \b currently) * source/compiler/cmdcheck.c * added new command line switch -r= with defaults equal to -r=1024 * include/hbpp.h * source/compiler/harbour.l * source/compiler/harbour.y * source/macro/macro.y * source/pp/ppcomp.c * source/pp/ppcore.c * source/pp/pplib.c * source/pp/pptable.c * source/pp/pragma.c * fixed compilation of #command ( => (,7 (loops in #define or #command are trapped now) * fixed compilation of \[ and \] in command/translate * modified TEXT/ENDTEXT to use '#pragma __text' + added #pragma __stream and #pragma __cstream (examples later) 2006-03-08 3:31 UTC-0500 David Arturo Macias Corona - harbour/source/codepage/cdpsl437.c - harbour/source/codepage/cdpsl852.c - harbour/source/codepage/cdpslwin.c - harbour/source/codepage/cdpsliso.c - Removed these four files. 2006-03-06 12:00 UTC+0100 Mitja Podgornik David Macias: Source code provided by Mitja Podgornik * harbour/contrib/mysql/mysql.ch + added MYSQL_DECIMAL_TYPE for MySQL versions 5.0 and above returns 5 digit numeric version of MySQL server * harbour/contrib/mysql/tmysql.prg + added functions sql_commit(), sql_rollback()(CLASS TMySQLServer) to support transactions with InnoDB table types + added function sql_version() (CLASS TMySQLServer) returns 5 digit numeric version of MySQL server * harbour/source/codepage/cdpsl437.c * harbour/source/codepage/cdpsl852.c * harbour/source/codepage/cdpslwin.c * harbour/source/codepage/cdpsliso.c + Update startup code to work with MSC 2006-03-02 18:00 UTC+0100 Ryszard Glab * source/compiler/harbour.l * source/pp/ppcomp.c * source/pp/ppcore.c +added new hidden preprocessor directive * fixed compilation of included files in cases when the file * fixed translation of nested command/translate * fixed translation of TEXT/ENDTEXT to be more Clipper compatible +added new hidden preprocessor directive __text|ParseBlockCode|EndBlockCode|StartBlockCode currently TEXT is preprocessed using: #command TEXT => __text|Qout(%s)|QQOut() #command TEXT TO FILE => ; __text|Qout(%s)|__TextRestore()|__TextSave() ParseBlockCode is called for every line beetwen TEXT/ENDTEXT, %s is replaced with the text enclosed with [] 2006-03-02 01:10 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/pp/ppcore.c * fixed yest another problem with PP which caused GPF on minigui compilation 2006-03-01 21:15 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/dbinfo.ch * harbour/source/rdd/workarea.c * added DBI_SCOPEDRELATION action. It alow to test if given relation on current work area sets scope on child index. F.e.: dbInfo( DBI_SCOPEDRELATION, 1 ) 2006-03-01 20:40 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbapicdp.h * harbour/source/rtl/cdpapi.c * added optional BOOL parameter to functions which translate to UTF8 to not translate control code characters * harbour/source/rtl/gtsln/gtsln.c * harbour/source/rtl/gtxwc/gtxwc.c * update for new parameter in UTF8 functions 2006-03-01 16:40 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/rtl/cdpapi.c * harbour/source/rtl/gtxwc/gtxwc.c ! fixed UTF8 trnalsations 2006-03-01 14:30 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/contrib/htmllib/default.ch * fixed few wrong definitions - Ryszard, the definitions where wrong but Clipper PP seems to parse them. * harbour/contrib/rdd_ads/ads1.c * call AdsFlushFileBuffers() only when _SET_HARDCOMMIT is set (default) * harbour/include/Makefile + harbour/include/hbgfx.ch + harbour/include/hbgfxdef.ch + added hbgfx.ch, hbgfxdef.ch and missing tbrowse.ch * harbour/include/hbapigt.h * harbour/include/hbgtcore.h * harbour/source/rtl/gtapi.c * harbour/source/rtl/hbgtcore.c + added hb_gtGfxPrimitive(), hb_gtGfxText() - it's a work in progress now this functions works like in xHarbour allow to draw graphic objects in GTs which can do that (GTALLEG, GTXWC) but I plan to introduce some modifications in them. + harbour/tests/gfx.prg + added test program by Mauricio Abre (borrowed from xHarbour) which illustrates GFX usage * harbour/include/hbdefs.h * harbour/source/compiler/genc.c * harbour/source/compiler/harbour.c * harbour/source/vm/hvm.c * minor modification in some harbour func name and symbol scope definitions - I'd like to keep them in one place for easier manipulations in the future * harbour/source/compiler/harbour.y * harbour/source/pp/ppcore.c * harbour/source/pp/pplib.c * harbour/utils/hbpp/hbpp.c * clean a little bit recent modification it should resolve the problem with GPFs reported by users and some possible memory leaks when preprocessing/compilation process is interrupted. Ryszard I decided to always store copy of file name in open files structure - it can be used by compiler, preprocessor, PPLIB and HBPP and IMHO in all cases it should have valid and always initialized in the same way members for easier manipulation. In the future I'd like to clean the whole PP usage. I will need to keep all compiler and PP static variables in one structure pointed by pointer in thread local data or passed to called functions for MT support. * harbour/source/rtl/cdpapi.c * set 0 at the end of destination string in hb_cdpStrnToUTF8() * harbour/source/rtl/dateshb.c ! fixed possible GPF in CTOD when badly formated date is given * harbour/source/rtl/gtxwc/gtxwc.c * harbour/source/rtl/gtxwc/gtxwc.h * changed the selection code - now both PRIMARY and CLIPBOARD selections are set by Harbour. It should work with any programs which uses any of them but I'd like to remove one of this selections or give user a way to chose the preferred one. I can also add support for automatic setting/clearing/pasting PRIMARY selection by GTXWC with mouse and shift key. I'm waiting for opinions. + added basic support for GFX operations + harbour/source/rtl/gtalleg/Makefile + harbour/source/rtl/gtalleg/fixedth.sfc + harbour/source/rtl/gtalleg/gtalleg.c + harbour/source/rtl/gtalleg/ssf.c + harbour/source/rtl/gtalleg/ssf.h + added new GT by Mauricio Abre based on Allegro cross platform graphic libraries. Code borrowed from xHarbour and modified by my for new Harbour GT API. 2006-02-28 17:00 UTC+0100 Ryszard Glab * include/hbpp.h * source/pp/ppcore.c * source/pp/pptable.c * fixed handling of optional clauses in command/translate #command PRINT TO => [:=]PrintPage() * fixed <-x-> match marker * added fixed length of command/translate/define name to speed translation * source/compiler/harbour.l * fixed GPF in handling of '¯o.tekst' syntax (introduced recently) 2006-02-22 21:25 UTC-0400 Alejandro de Garate * harbour/.cvsignore restored to previous 1.9 revision 2006-02-22 15:48 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/compiler/harbour.c * harbour/source/rtl/gtdos/gtdos.c * fixed casting and typos for DOS OpenWatcom compilation 2006-02-21 23:20 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/bin/hb-func.sh * added support for -L in xhbmk * set the highest priority to user libraries specified by -l linker option * harbour/include/hbapicdp.h * harbour/source/rtl/cdpapi.c * added UTF8 related functions: hb_cdpUTF8StringLength(), hb_cdpStringInUTF8Length(), hb_cdpUTF8ToStrn(). * Changed name of hb_cdpStrnToUTF() function to hb_cdpStrnToUTF8() to avoid confusions with UTF16 * harbour/include/hberrors.h * harbour/source/compiler/hbgenerr.c * harbour/source/compiler/harbour.c + added to new errors (memory corruption and memory overflow) for compiler level FM statistic. * harbour/source/compiler/hbfix.c ! fixed stupid typo in copy and past which broke conditional jump reduction * harbour/include/hbgtcore.h * harbour/source/rtl/hbgtcore.c * harbour/include/hbgtinfo.ch * harbour/source/rtl/gtdos/gtdos.c * harbour/source/rtl/gtos2/gtos2.c * harbour/source/rtl/gtwin/gtwin.c * added new method to change screen buffer state (hot/cold/scroll) and use them in some GTs. * harbour/source/rtl/gx.c * use screen dimensions as default values for SETMODE() not maxrow()/ maxcol() * harbour/source/rtl/gtxwc/gtxwc.c * harbour/source/rtl/gtxwc/gtxwc.h * added support for clipboard * added support for cursor shape - like in DOS/VGA * harbour/source/rdd/workarea.c * harbour/source/rdd/dbffpt/dbffpt1.c * cleaned some redundant extern declarations * harbour/contrib/rdd_ads/ads1.c * harbour/contrib/rdd_ads/adsfunc.c * removed some unnecessary #include ... * harbour/source/rtl/str.c * harbour/source/rtl/transfrm.c * harbour/source/vm/itemapi.c ! fixed some small incompatibilities with Clipper in number to string conversions 2006-02-17 10:10 UTC+0100 Ryszard Glab * include/hbcomp.h * source/compiler/Makefile * source/compiler/cmdcheck.c * source/compiler/harbour.y * source/compiler/hbident.c * even more fixes to memory leaks in the compiler (all compiler structures are deallocated on exit now, really :) 2006-02-16 14:40 UTC+0100 Ryszard Glab * include/hbcomp.h * include/hbexpra.c * source/compiler/Makefile * source/compiler/expropta.c * source/compiler/harbour.c * source/compiler/harbour.y * source/compiler/hbgenerr.c * all compiler structures are deallocated on exit now 2006-02-15 20:24 UTC+0100 Viktor Szakats (viktor.szakats syenar.hu) * harbour/hrbdll.bc * harbour/hrbdll.vc * harbour/makefile.bc * harbour/makefile.nt * harbour/makefile.vc * harbour/makefile64.nt * harbour/source/codepage/Makefile + harbour/source/codepage/cp_tpl.c + harbour/source/codepage/cpbg866.c + harbour/source/codepage/cpbgiso.c + harbour/source/codepage/cpbgwin.c + harbour/source/codepage/cpeldos.c + harbour/source/codepage/cpelwin.c + harbour/source/codepage/cpesdos.c + harbour/source/codepage/cpesmwi.c + harbour/source/codepage/cpeswin.c + harbour/source/codepage/cpgedos.c + harbour/source/codepage/cpgewin.c + harbour/source/codepage/cphu852.c + harbour/source/codepage/cphuiso.c + harbour/source/codepage/cphuwin.c + harbour/source/codepage/cppl852.c + harbour/source/codepage/cppliso.c + harbour/source/codepage/cpplmaz.c + harbour/source/codepage/cpplwin.c + harbour/source/codepage/cppt850.c + harbour/source/codepage/cpptiso.c + harbour/source/codepage/cpru866.c + harbour/source/codepage/cprukoi.c + harbour/source/codepage/cpruwin.c + harbour/source/codepage/cpsl437.c + harbour/source/codepage/cpsl852.c + harbour/source/codepage/cpsliso.c + harbour/source/codepage/cpslwin.c + harbour/source/codepage/cpsrwin.c - harbour/source/codepage/cdp_tpl.c - harbour/source/codepage/cdpbg866.c - harbour/source/codepage/cdpbgiso.c - harbour/source/codepage/cdpbgwin.c - harbour/source/codepage/cdpeldos.c - harbour/source/codepage/cdpelwin.c - harbour/source/codepage/cdpesdos.c - harbour/source/codepage/cdpesmwi.c - harbour/source/codepage/cdpeswin.c - harbour/source/codepage/cdpgedos.c - harbour/source/codepage/cdpgewin.c - harbour/source/codepage/cdphu852.c - harbour/source/codepage/cdphuiso.c - harbour/source/codepage/cdphuwin.c - harbour/source/codepage/cdppl852.c - harbour/source/codepage/cdppliso.c - harbour/source/codepage/cdpplmaz.c - harbour/source/codepage/cdpplwin.c - harbour/source/codepage/cdppt850.c - harbour/source/codepage/cdpptiso.c - harbour/source/codepage/cdpru866.c - harbour/source/codepage/cdprukoi.c - harbour/source/codepage/cdpruwin.c - harbour/source/codepage/cdpsl437.c - harbour/source/codepage/cdpsl852.c - harbour/source/codepage/cdpsliso.c - harbour/source/codepage/cdpslwin.c - harbour/source/codepage/cdpsrwin.c * Renamed codepage files (cdp*.c -> cd*.c) * Updated init code for all remaining codepages. 2006-02-15 13:50 UTC+0100 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/source/vm/hvm.c ! fixed memory leak I introduced changing Ryszard modifications need such functionality yet + harbour/ChangeLog.015 * harbour/source/vm/debug.c * harbour/harbour.spec * harbour/bin/hb-func.sh * some modification in xhb* scripts building - adding passing predefined compiler and linker switches * harbour/source/vm/hvm.c * minor code cleanup 2006-09-03 18:55 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/include/hbapicls.h * harbour/source/vm/classes.c * harbour/source/vm/hvm.c * harbour/tests/overload.prg + added support for overloading [] in assignment operation 2006-09-03 16:30 UTC+0200 Przemyslaw Czerpak (druzus/at/priv.onet.pl) * harbour/ChangeLog + harbour/ChangeLog.016 * new ChangeLog file created * harbour/include/hbver.h * updated version number to 0.47.0 * tagged CVS as build47